FCC ID: APYHRO00183 Cellular Phone

202SH 202SH 202SH PDF

202SHPDF

202SH 202SH TV TV S! GPS TV S!

202SH TINSJB010AFZZ 13X 00.0 XX XX

. http://mb.softbank.jp/mb/product/

3G/202sh_for_biz 202SHPDF 202SH

. 202SH 202SH

. 1SAR 202SHe 1 SAR: Specic Absorption Rate2W/kg2 WHO ICNIRP 202SHeSAR0.657W/kg SAR SAR 1.5 3 20 SAR http://www.tele.soumu.go.jp/j/sys/ele/index.htm http://www.arib-emf.org/index02.html 1 142 2 9 3 SAR223 IEC62209-2 2310 FCC FCC FCC SAR: Specic Absorption Rate FCC SAR1.6W/kg FCC 0.23W/kg 202SHe 1.5 FCC 1.5 FCC SAR FCC Radio Frequency Safety http://transition.fcc.gov/oet/rfsafety/

202SHe ICNIRP SAR: Specic Absorption Rate SAR 2W/kgSAR 0.674W/kg SAR SAR http://www.who.int/emf SoftBank 3G SAR http://mb.softbank.jp/mb/support/sar/

Electromagnetic Safety For body-worn operation, this mobile phone has been tested and meets RF exposure guidelines when used with an accessory containing no metal and positioning the handset a minimum 15 mm from the body. Use of other accessories may not ensure compliance with RF exposure guidelines. CE Declaration of Conformity Hereby, Sharp Telecommunications of Europe Ltd, declares that 202SHe is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the original declaration of conformity for each model can be found at the following Internet address:

http://www.sharp.co.jp/k-tai/

European RF Exposure Information Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientic organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health. The guidelines use a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR limit for mobile devices is 2.0 W/kg and the highest SAR value for this device when tested at the ear was 0.634 W/kg*. As mobile devices offer a range of functions, they can be used in other positions, such as on the body as described in this User Guide**. In this case, the highest tested SAR value is 0.674 W/kg***. As SAR is measured utilizing the device's highest transmitting power the actual SAR of this device while operating is typically below that indicated above. This is due to automatic changes to the power level of the device to ensure it only uses the minimum level required to reach the network. The World Health Organization has stated that present scientic information does not indicate the need for any special precautions for the use of mobile devices. They note that if you want to reduce your exposure then you can do so by limiting the length of calls or using a hands-free device to keep the mobile phone away from the head and body.

*The tests are carried out in accordance with international guidelines for testing.

**Please see "Electromagnetic Safety" on P.40 for important notes regarding body-worn operation.

***A method of measuring SAR when a mobile phone is used at positions other than at the ear was established in March 2010 through an international standard (IEC62209-2). MIC technical regulation was reported in October 2011 by the Information and Communications Council. World Health Organization http://www.who.int/emf List of Specic Absorption Rates (SAR) for radio waves by 3G model http://mb.softbank.jp/mb/support/sar/

(Japanese) The maximum output voltage for the music player function, measured in accordance with EN 50332-2, is 24.0 mV. Headphone Signal Level FCC Notice

. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. FCC Information to User This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient/relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Information Your handset is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency

(RF) energy set by the Federal Communications Commission of the U.S. Government. The guidelines are based on standards that were developed by independent scientic organization through periodic and thorough evaluation of scientic studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless handsets employs a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. The tests are performed in positions and locations (e.g. at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model handset as reported to the FCC when tested for use at the ear is 0.27 W/kg, and when worn on the body in a holder or carry case, is 0.23 W/kg. Body-worn Operation; This device was tested for typical body-worn operations with the back of the handset kept 15 mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 15 mm separation distance between the user's body and the back of the handset. The use of beltclips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The FCC has granted an Equipment Authorization for this model handset with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model handset is on le with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/ea/ after searching on FCC ID APYHRO00183. Additional information on Specic Absorption Rates (SAR) can be found on the FCC website at http://transition.fcc.gov/oet/rfsafety/.

2 0 1 3 1 1 TCAUZA256AFZZ 13A . XX AI 202SH SHBCU1 SoftBank 202SH SoftBank 202SH SoftBank 202SH3GGSM

. A12 1 2 4 7 8 12 PIN13 14 16 17 25 28 31 SAR34 36 Quick Tips 37

. PDF PDF http://www.softbank.jp/mb/r/support/202sh/

http://shweb.sharp.co.jp/manual/202SH/

URL http://www.softbank.jp 1 A17 2 Off 3 3 1

. 2

. 4

. 4

. 1

. AC ZTDAA1 AC AC

AC AC100V

AC

1

. 5 2 AC

. 3 AC AC

. 4 AC

. 5

. 6 1 2

. 2 1 7

. AC

. USIM 2

USIM USIM USIM 6 7 IPX5JIS51 IPX7JIS72 IP5XJIS53 1 IPX56.3mm 3m12.5 3 2 IPX71m 30 3 IP5X75m 8

. 11

. 535

. IPX5IPX7IP5X

. 6 5353590 3640

. 8 9

, 10

. 21 A 6 535 10cm

. 1 2 20

3

. 4 23

, 11

. 4

. A1

. 3

, 12 1

%SS%

2 f 3 S%

4 S%

5 S%

6 S%

7 S%

. 5S%SS%S S%

. 48 1 13 2 S%

3 S%

4 S%

5 S%

PIN PINUSIM USIM9999

. PIN PIN 1

%SS%

2 f SS%

3 PINS%

4 OnOffS%SOnS%

5 PINS%

. PIN 6 PINS%

7 PINS%

8 PINS%

9 PINS%

PIN

. PIN3PIN PIN

. APIN PUK PUKS%SPINS

%SPINS%

, PUK10USIM USIM 13 202SH g g 1 3G GSM 2 3G GSM TV 3 AC mm 0.25W3G 2.0WGSM 1 2 3 TV 2 II 10 14

. 2 MBS!

MB MB MBS!

5 4M 6 MBKB 4 5 1 6 S!

MB SHBCU1 3.7V 770mAh 35.446.34.6mm PCABS Yahoo A/a N PETUV PAUV PCUV PMMAPET PCPET PCABSUV USIM PET PC UV ABS PPA SWCH16A 15 1

%SS%

2 f SS%

3 S%

4 B

. A

. 30

. USB

. 4 5 6 7 8 9 16 17 USIM 8 5 6 4 4 IH 4 1. 8 4 8 2. 3. 4 4 4 4 8 8 18 19 Li-ion00 4 4 4 8 20 8 8 8 8 4 A15 8 4 8 A15 8 8 8 4 4 8 21 4 4 8 4 8 8 8

. ACAC100V 240VAC DC12V24V

. 4 4 9 8 9 8 4 9 8 4 8 7 4 4 22 23 94 133 22cm 8 8

. ICU CCU

. 8 8

. USIMUSIM A

%SS%SfS S%

. JavaScriptFlash 24 25 SSLTLS

. SSLTLS

. SSLTLS SSL TLS GMOEMC Go Daddy, Inc. SSLTLS USIM Bluetooth Bluetooth Bluetooth Bluetooth Bluetooth Bluetooth 157

. 2.4GHz FH-SS10m 26 27

. 5353590 3640

. Bluetooth On On

%SS%SfS S%SS%S S%SS%SS%

, S!

%SS%SfS S%SS%S S%SS%SS%

%SS%S S%SS%S S%S S%

%SS%S S%SS%S S%

%SS%S S%SS%S S%SS%

%SS%SfS S%SOffS%

, BSAVS%S S%SS%

OffOn 28 29 USB URL

, http://k-tai.sharp.co.jp/support/download/

s/#!/soft_utility

. USB Bluetooth

. 30 MPEG-4 This product is licensed under the MPEG-4 Visual Patent Portfolio License for the personal and non-

commercial use of a consumer to (i) encode video in compliance with the MPEG-4 Video Standard

("MPEG-4 Video") and/or (ii) decode MPEG-4 Video that was encoded by a consumer engaged in a personal and noncommercial activity and/or was obtained from a licensed video provider. No license is granted or implied for any other use. Additional information may be obtained from MPEG LA. See http://www.mpegla.com. This product is licensed under the MPEG-4 Systems Patent Portfolio License for encoding in compliance with the MPEG-4 Systems Standard, except that an additional license and payment of royalties are necessary for encoding in connection with (i) data stored or replicated in physical media which is paid for on a title by title basis and/or

(ii) data which is paid for on a title by title basis and is transmitted to an end user for permanent storage and/or use. Such additional license may be obtained from MPEG LA, LLC. See http://www.mpegla.com for additional details. AVC iAVC AVC iiAVC AVCAVC AVC MPEG LA, L.L.C. http://www.mpegla.com 31 SMIL ACCESSNetFront Browser NetFront SMIL Player 2012 ACCESS CO., LTD. All rights reserved. ACCESSNetFrontACCESS Independent JPEG Group QR TVVeilView BookSurfing 2005-2008 Taishukan R S A S e c u r i t y I n c . R S A BSAFE RSARSA Security Inc. BSAFERSA Security Inc. Java JBlend Powered by JBlend. Copyright 1997-2012 Aplix and/or its afliates. All rights reserved. JBlendJBlend OracleJavaOracle Corporation microSD, microSDHCSD-3C, LLC Bluetooth is a trademark of the Bluetooth SIG, Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sharp is under license. Other trademarks and trade names are those of their respective owners. BluetoothBluetooth SIG,Inc. MX.net MX.net KONISHI Tomoshichi, MINAMIDE Kosei &

Taishukan, 2009

. MX.net KITAHARA Yasuo & Taishukan, 2009

. Amazon.co.jpAmazon.com, Inc. RECRUIT

. Yahoo!

Yahoo Japan KDDI iWnn iWnn OMRON SOFTWARE Co., Ltd. 2008-2011 All Rights Reserved. SOFTBANK Yahoo!Yahoo!Y!

Yahoo! Inc. S!S!S!S!

TVPC PCS!

32 33 1SAR 202SH 1 SAR: Specic Absorption Rate2W/kg2 WHO ICNIRP 202SHSAR0.605W/kg SAR SAR 1.5 3 20 SAR http://www.tele.soumu.go.jp/j/sys/ele/index.htm http://www.arib-emf.org/index02.html 1 142 2 9 3 SAR223 IEC62209-2 2310 FCC FCC FCC SAR: Specic Absorption Rate FCC SAR1.6W/kg FCC 0.253W/kg 202SH 1.5 FCC 1.5 FCC SAR FCC Radio Frequency Safety http://transition.fcc.gov/oet/rfsafety/

202SH ICNIRP SAR: Specic Absorption Rate SAR 2W/kgSAR 0.835W/kg SAR SAR http://www.who.int/emf SoftBank 3G SAR http://mb.softbank.jp/mb/support/sar/

34 35

. A

. 6

. A Quick Tips Before Using Handset 3 Replace Battery Cover Accessory Battery (SHBCU1) Battery Installation 1 Remove Battery Cover Battery Cover

. Align Battery Cover with handset, then rmly press down along shaded areas. 4 Close Battery Cover rmly

. If Battery Cover is not closed rmly, debris may get caught between Battery Cover gasket and base, or ingress of liquid/dust may occur. Notch

. Use notch to lift Battery Cover. Push up Battery Cover along edges to remove it. 2 Insert Battery Recycling Symbol Up

. With recycling symbol facing up, align Battery terminals with contacts. 36 37 Charging (AC Charger) Use AC Charger ZTDAA1 (sold separately). AC Charger is not water or dust proof. Do not charge Battery while handset is wet. Handset/AC Charger may become warm while charging. 2 Insert Charger connector

. With arrows facing up, insert Charger connector until it clicks. 3 Extend blades and plug AC Charger into AC outlet Handset Keys AC 100 V Outlet Blades Notification Lamp External Device Port Charger Connector Arrows Up Port Cover Release Tabs 1 Open Port Cover as shown Notch

. Pull at notch to open. Notication Lamp illuminates while charging. Notication Lamp goes out when Battery is full. 4 Unplug AC Charger AC Charger B Open Messaging menu or execute Softkey functions. Open Shortcuts menu. In text entry windows, toggle upper/

lower case.

escape.

$ Delete characters or go back/

! Initiate/answer calls. 1 Enter numbers/characters.

~ Open Dictionary.

) Long Press to activate/cancel

Manner mode. 5 Remove Charger connector from handset

. Squeeze release tabs and pull straight out. 6 Close Port Cover 1 2

. Hold Port Cover and retract hinge (

then push edge to close (2). 7 Retract blades 1), Select menu items, move cursor, etc.

%: Open Main Menu. c: Open Call Log (Dialed). d: Open Call Log (Received). a: Open Standby Window. b: Open Phone Book. Softkey functions. A Access the Internet or execute

& Activate TV. In text entry windows, switch entry modes.

" End calls or operations. Long Press to power on/off. 38 39 Basic Operations General Notes Handset Power On/Off Electromagnetic Safety Power On

" (Long Press) After Power On Graphics, follow these steps:

"S"S%SbS%

Change interface to English (below).

" (Long Press) Power Off English Interface

%S S%S Language S%S English S%

Network Information Retrieval A prompt appears when %, B or A is Pressed for the rst time. To use Network-related services:

Yes S%S Retrieval starts S%

. Clock will be set automatically. My Phone Number

%S0 Phone Help Access this handy guide to handset settings and key functions/shortcuts, etc.

%S Tools S%S Doc./Rec. tab S Phone Help S%S Select item S%

40 For body-worn operation, this mobile phone has been tested and meets RF exposure guidelines when used with an accessory containing no metal and positioning the handset a minimum 15 mm from the body. Use of other accessories may not ensure compliance with RF exposure guidelines. CE Declaration of Conformity Hereby, Sharp Telecommunications of Europe Ltd, declares that 202SH is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the original declaration of conformity for each model can be found at the following Internet address:

http://www.sharp.co.jp/k-tai/

Battery Cautions Use specied Battery or Charger only. Non-specied equipment use may cause malfunctions, electric shock or re due to battery leakage, overheating or bursting. Do not dispose of an exhausted Battery with ordinary refuse; always tape over Battery terminals before disposal. Take Battery to a SoftBank Shop, or follow the local disposal regulations. Charge Battery in ambient temperature 5 - 35; Battery may leak/overheat and performance may deteriorate outside this range. European RF Exposure Information Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientic organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health. The guidelines use a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR limit for mobile devices is 2.0 W/kg and the highest SAR value for this device when tested at the ear was 0.586 W/kg*. As mobile devices offer a range of functions, they can be used in other positions, such as on the body as described in this User Guide**. In this case, the highest tested SAR value is 0.835 W/kg***. As SAR is measured utilizing the device's highest transmitting power the actual SAR of this device while operating is typically below that indicated above. This is due to automatic changes to the power level of the device to ensure it only uses the minimum level required to reach the network. The World Health Organization has stated that present scientic information does not indicate the need for any special precautions for the use of mobile devices. They note that if you want to reduce your exposure then you can do so by limiting the length of calls or using a hands-free device to keep the mobile phone away from the head and body.

*The tests are carried out in accordance with international guidelines for testing.

**Please see "Electromagnetic Safety" on P.40 for important notes regarding body-worn operation.

***A method of measuring SAR when a mobile phone is used at positions other than at the ear was established in March 2010 through an international standard (IEC62209-2). MIC technical regulation was reported in October 2011 by the Information and Communications Council. World Health Organization http://www.who.int/emf List of Specic Absorption Rates (SAR) for radio waves by 3G model http://mb.softbank.jp/mb/support/sar/

(Japanese) The maximum output voltage for the music player function, measured in accordance with EN 50332-2, is 24.0 mV. Headphone Signal Level FCC Notice

. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. FCC Information to User This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 41 residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient/relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/

TV technician for help. FCC RF Exposure Information Your handset is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The guidelines are based on standards that were developed by independent scientic organization through periodic and thorough evaluation of scientic studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless handsets For SoftBank handset or service information, call General Information. For repairs, call Customer Assistance. Customer Service employs a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. The tests are performed in positions and locations (e.g. at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model handset as reported to the FCC when tested for use at the ear is 0.271 W/kg, and when worn on the body in a holder or carry case, is 0.253 W/kg. Body-worn Operation; This device was tested for typical body-worn operations with the back of the handset kept 15 mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 15 mm separation distance between the user's body and the back of the handset. The use of beltclips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The FCC has granted an Equipment Authorization for this model handset with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model handset is on le with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/ea/ after searching on FCC ID APYHRO00182. Additional information on Specic Absorption Rates (SAR) can be found on the FCC website at http://transition.fcc.gov/oet/rfsafety/. 42 43 Memo