all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual 1 of 2 | Users Manual | 2.06 MiB | ||||
1 |
|
User Manual 2 of 2 | Users Manual | 1003.18 KiB | ||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | RF Exposure Info | |||||||
1 | Operational Description | |||||||
1 | RF Exposure Info | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | |||||||
1 | Test Setup Photos | |||||||
1 | Cover Letter(s) | |||||||
1 | Test Report | |||||||
1 | Cover Letter(s) | |||||||
1 | RF Exposure Info | |||||||
1 | RF Exposure Info | |||||||
1 | RF Exposure Info | |||||||
1 | RF Exposure Info | |||||||
1 | RF Exposure Info |
1 | User Manual 1 of 2 | Users Manual | 2.06 MiB |
Introduction Congratulations and thank you for choosing the GS-200. About This User Guide This user guide is carefully designed to help you learn about your phones features and operations quickly and effectively. NOTICE We strongly recommend that you keep separate permanent written records of all important data. Data may be lost or altered in virtually any electronic memory product under certain circumstances. Therefore, we assume no responsibility for data lost or otherwise rendered unusable, whether as a result of improper use, repairs, defects, battery replacement, use after the specified battery life has expired or any other cause. We assume no responsibility, directly or indirectly, for financial losses or claims from third parties resulting from the use of this product and any of its functions, such as stolen credit card numbers, the loss or alteration of stored data, etc. All company and/or product names are trademarks and/or registered trademarks of their respective holders. For Your Records 1 Introduction Screen layout illustrated in this user guide may differ from the actual one. The information described in this user guide is subject to change without notice. All the functions described in this user guide may not be supported in all networks. We assume no responsibility for downloaded contents, information, etc. from network. Copyright According to copyright laws, the reproduction, alteration and use of material which is protected by copyright (music, pictures, etc.) is only permitted for personal or private use. If the user is not in possession of more extensive copyright or has not received the explicit permission from the copyright owner to reproduce, alter or use a copy which has been made or modified in this way, this is considered to be a violation of the copyright laws and gives the copyright owner the right to claim for damages. For this reason, avoid the illegal use of material which is protected by copyright. Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries. Licensed by Inter Digital Technology Corporation under one or more of the following United States Patents and/or their domestic or foreign counterparts and other patents pend-
ing, including U.S. Patents: 4,675,863: 4,779,262:
4,785,450 & 4,811,420. Introduction 2 Licensed under U.S. Patent 4,558,302 and foreign counter-
parts. T9 Text Input is covered by the United Kingdom Pat. No.2238414B, Euro. Pat. No. 0 842 463 (96927260.8) and other patents pending. Useful functions and services of the phone Your phone offers you the following features:
The built-in digital camera can take pictures. Create and read SMS. Multimedia Messaging Service (MMS) can personalise your phone in various ways: you can send and receive multimedia messages with graphical images, photographs or sound attached. WAP browser helps you to access a variety of information on the mobile internet. The maindisplay of colour TFT-LCD makes the screens clearer, more beautiful and easier to view. Sub-Screen allowing you to see who is calling and new message indicators. You can create the various melodies for your original ringing tones using up to 16 chords. Voice memo function allows you to record and play back your vocal message. 3 Introduction Table of Contents Introduction ................................................. 1 Useful functions and services of the phone ..3 Table of Contents ........................................ 4 Your Phone .................................................. 7 Accessories....................................................7 Getting Started ............................................ 8 Inserting the SIM Card and the Battery .....10 Charging the Battery ..................................13 Turning Your Phone On and Off ...............15 Display Indicators ......................................15 Sub-Screen .................................................17 Call Functions ........................................... 19 Making a Call .............................................19 Speed Dialling ............................................19 Redialling ...................................................20 Ending a Call ..............................................20 Answering a Call ........................................20 Incall Menus ...............................................21 Phonebook ................................................. 24 Entering Characters ....................................24 Creating a New Entry .................................25 Finding a Name and Number .................... 28 Editing Phonebook Entries ........................ 28 Deleting Phonebook Entries ...................... 29 Checking Your Own Numbers .................. 29 View Groups .............................................. 29 Memory Status ........................................... 30 Speed Dial List .......................................... 30 Sending Messages ..................................... 31 Using the Menu ..........................................32 List of Menu Functions ............................. 33 Camera ......................................................34 Using the Timer ......................................... 36 Sending Pictures ........................................ 37 Deleting Pictures ....................................... 37 My Phone ....................................................38 Image Gallery ........................................... 40 Sound Gallery ........................................... 43 Text Templates .......................................... 46 Table of Contents 4 Memory Status ...........................................47 Fun & Games ............................................. 48 Games .......................................................51 Melody Editor ...........................................52 Tone Editor .................................................59 Profiles ...................................................... 63 Activating a Profile ....................................63 Customising Profiles ..................................63 Resetting Profile Settings ...........................64 Ringer Volume ...........................................64 Ringer Type ...............................................64 Vibration ....................................................65 Keypad Tones ............................................65 Warning Tone ............................................66 Power On/Off Sound .................................66 Message Alert ............................................67 Low Battery Alert ......................................68 Any Key Answer .......................................68 Organiser ................................................... 69 Calculator ...................................................69 Calendar ....................................................70 Clock & Alarm ...........................................71 Voice Memo................................................75 Help List ....................................................76 Call Manager ..............................................77 Call Log ......................................................77 Call Timers..................................................78 Call Costs ....................................................79 Data Counter ...............................................81 Diverts.........................................................81 Settings .......................................................84 Phone Settings ............................................84 Call Settings ...............................................89 Network Settings ........................................93 Internet Settings ..........................................94 Infrared .......................................................98 Security .......................................................99 Master Reset ............................................103 Browser ....................................................104 Viewing the WAP Browser ......................104 Navigating a WAP Page ...........................104 Messages ..................................................106 MMS (Multimedia Messaging Service) ...106 SMS (Short Message Service) .................113 Cell Broadcast .........................................117 5 Table of Contents Cell Information ........................................118 Data Transmission .................................. 119 System Requirements ...............................119 Software Installation and Setup ...............119 Using the Modem Setup ...........................119 Troubleshooting ...................................... 121 Safety Information and Usage Guidelines................................................. 123 Drivers Safety Tips ..................................126 FDA Consumer Update............................126 Exposure to Radio Waves.........................128 Quick Reference GS-200 Table of Contents 6 Your Phone Please check the following carefully. Your phone should come complete with:
GSM 900/1800/1900 GPRS phone Rechargeable Li-ion battery AC charger Hands free CD-ROM User guide Accessories (option) Li-ion spare battery (XN-1BT11) Cigarette lighter charger (XN-1CL10) Car holder (XN-1CH11) Data cable (RS232C cable: XN-1DC10) Some of the above accessories may not be offered by region. For details, please contact your dealer. 7 Your Phone Getting Started Getting Started 8 1. Earpiece 2. Navigation Keys (Arrow Keys):
Move the cursor to select menu items, adjust the earpiece volume, etc. Searches the Phonebook entries in stand-by mode. Adjusts the earpiece volume in stand-by mode. Displays the Phonebook menu in stand-by mode. Displays the Main Menu and executes the functions. Executes the function at the bottom left on the screen. Makes or accepts calls, views the call in stand-by mode. Used to connect to Voice mail centre. (Depends on the SIM card.) Used to enter * or switch the text mode. Up/Down arrow keys:
Left arrow key:
Right arrow key:
3. M Key:
4. Left Soft Key:
5. Send Key:
6. Voice Mail Key:
7. * /Shift Key:
8. Main-Screen Display 9 Getting Started 9. Hands free Connector 10. Right Soft Key:
11. End/Power Key:
Executes the function at the bottom right on the screen. Ends a call, turns power on/
off. 12. Keypad 13. Microphone 14. External Connector: Used to connect either the charger or data cable. 15. Aerial 16. Sub-Screen Display 17. Camera 18. Mirror:
19. LED Indicator 20. Infrared Port:
21. Speaker 22. Side Keys Up/Down keys:
23. Battery Cover For self portraits. Sends and receives data via infrared. Move the cursor to select menu items, etc. Inserting the SIM Card and the Battery 1. Slide off the battery cover. 2. Slide the SIM card into the SIM holder. SIM card Getting Started 10 3. Hold the battery so that the metal contacts of the battery are facing down, slide the guides on the top of the battery into the battery slots insert it
, and then
. 2 1 11 Getting Started 4. Replace the battery cover so that the marks are aligned and slide it as shown. Note Make sure that only 3V SIM cards are used. Use only the approved battery (XN-1BT11). Removing the SIM Card and the Battery 1. Make sure to turn off your phone and disconnect charger and other accessories. Slide off the battery cover. 3. Slide the SIM card by pushing the back of the card and remove it from the SIM holder. 2. Pick up the battery using the protruding edge and remove the battery from the phone. Getting Started 12 Battery Disposal The device is supported by a battery. In order to protect the environment, please read the following points concerning battery disposal:
Take the used battery to your local waste depot, dealer or customer service centre for recycling. Do not expose the used battery to an open flame, into water or dispose with the household waste. Charging the Battery You must charge the battery for at least 2 hours before using your phone for the first time. To Charge Using the Charger 1. Connect the charger to the external socket located on the bottom of the phone with the chargers PUSH TOP mark facing towards you, and to an AC outlet. LED indicator The LED indicator lights in red. Standard charging time: Approx. 2 hours. Note Charging time may be longer than above depending on the state of a battery and a surrounding situation.
(See Battery on page 124.) 13 Getting Started To disconnect the charger Push and hold the side buttons of the charger, then disconnect the charger from the external socket of the phone. 2. When charging is complete, the LED indicator turns off. Unplug the charger from the AC outlet, then unplug the charger connector from the phone. Note Do not use any non approved charger, this may damage your phone and invalidate any warranty, please see Battery on page 124 for details. When the phone is charging, the animated battery
) will be displayed in the upper right status icon (
of the screen. To Charge Using the Cigarette Lighter Charger The cigarette lighter charger (option) supplies power for charging from the cigarette lighter socket of a car. Battery Level Indicator The current battery level is displayed in the upper right hand side of the screen and the Sub-screen. Low Battery During Use When the battery is running low, an alarm will sound and the will appear on the screen and the Sub-
screen. If you are using your phone and you hear the low battery alarm, attach your charger as soon as possible. The phone may not be able to continue normal operation if you continue to use it. The battery may only last five minutes before the phone itself powers down during a call. Charge Level Indicators Full level (greater than 60%) Partial level (less than 60%) Partial level (less than 30%) Low level (less than 10%) Empty Charging the battery is recommended. Charge the battery. Getting Started 14 for Turning Your Phone On and Off To turn the power on, press and hold for approximately 2 seconds. The stand-by screen appears. To turn the power off, press and hold approximately 2 seconds. Entering the PIN Code If activated you will be asked to enter a PIN (Personal Identification Number) code after turning on your phone. 1. Enter your PIN code. 2. Press Note If your PIN code is entered incorrectly three times in
. a row, the SIM card is locked. See Enabling/
Disabling the PIN Code on page 99. Display Indicators Status Indicators Left softkey Right softkey 15 Getting Started 1. 2. 3. 4. 5. 6. 7. 8. 9.
10.
Indicates the strength of received signal/the service is out of range. Appears when in call.
Indicates the input mode (Upper case only the first letter of the word mode/
Upper case mode/Lower case mode/
Numeric mode). Appears when the T9 text input mode is activated.
: Appears when a new SMS, MMS Alert or WAP Alert has arrived. Appears when viewing secured WAP browser. Appears when a picture or image/
sound is attached to MMS. Indicates a Phonebook entry stored in the phone memory. Indicates a Phonebook entry stored on the SIM card. Indicates the battery level. 11.
12. 13. 14. 15. 16. 17. 18. 19.
Appears when your phone is roaming outside of your network. Appears when your phone is in data communication mode. Appears when your phone is in fax communication mode. Appears when your phone is GPRS enabled and within range. Flashes during GPRS transmission. Appears when Alarm is set. Appears when Diverts (p. 81) is set to All Calls. Appears when the data cable is connected to your phone. Appears when Ringer Volume
(p. 64) is set to Silent. Appears when Vibration alert is set. Getting Started 16 20. (No display)/
Indicates the phones mode (Normal mode/Activity mode/Meeting mode/
Car mode/Silent mode). Appears when a voice message is stored. Appears when up, down, right or left navigation is available. Appears when Infrared is on/during connection. 21. 22. 23.
Softkey Indicators To execute the operation indicated, press each corresponding key. 25. Area at the lower left of a screen:
Displays the operation executed by left softkey. 26. Area at the lower right of a screen:
Displays the operation executed by right softkey. 17 Getting Started Sub-Screen Status Indicators Status Indicators 1. 2. 3. 4. 5. 6. 7.
Indicates the received signal strength. Appears when in GPRS is within range and can be used. Flashes during in GPRS communication mode. Appears when a new SMS, MMS Alert or WAP Alert has arrived. Appears when Alarm is set. Indicates the battery level. Appears when Infrared is on/during connection. Appears when Diverts (p. 81) is set to All Calls. 8. 9.
Appears when the data cable is connected to your phone. Appears when Silent is set. Getting Started 18 Call Functions Making a Call 1. Enter the area code and the phone number you wish to dial. If you enter the wrong number, press delete the number to the left of the cursor.
[Clear] to to dial. 2. Press Emergency Calls 1. Enter 112 (international emergency number) using the keypad. to dial. 2. Press Note Emergency calls may not be available on all mobile phone networks when certain network services and/
or phone features are in use. Contact your network operator for more information. This Emergency number can normally be used to make an emergency call in any country, with or without a SIM card inserted, if a GSM network is within range. 19 Call Functions International Calls 1. Press and hold dialling prefix) sign appears. until a + (international 2. Enter the country code, followed by the area code and the number. to dial. 3. Press Note Enter the area code omitting the first 0 when making international calls, in most cases. (It differs for some countries.) Speed Dialling In the Speed Dial List, up to 9 phone numbers out of the Phonebook can be set. You can call the numbers using the digit keys (
For details on setting the Speed Dial List, see Speed Dial List on page 30. 1. Press and hold any of the digit keys (
and to to
). and The phone number stored in the Speed Dial List appears. Redialling You can redial the numbers in the call log list that you may have missed, received or dialled. Each list can contain up to 10 numbers. 1. Press 2. Press to select a category between during stand-by. or Dialled Numbers, Missed Calls and Received Calls. 3. Select the number you wish to call by pressing or
. to redial the call. 4. Press Automatic Redialling This setting allows you to automatically redial the number if the first attempt was unsuccessful. If you wish to stop redialling, press or To Set the Auto Redial Function 1. Press 2. Press 3. Press
. 4. Press
. to display the Main Menu. or or to select Settings, then press
. to select Call Settings, then press to select Auto Redial, then press
[End]. or 5. Select On to enable the Auto Redial function or Off to disable it, then press
. Note When you receive an incoming call, the Auto Redial function will be interrupted. Automatic redialling is not available for fax and data to end the call. calls. Ending a Call 1. Press Answering a Call When an incoming call is detected, the phone rings and the LED indicator flashes green. 1. Open your phone. 2. Press to answer the call. or Press any key except when the Any Key Answer function is enabled. Set the Any Key Answer function in the profile in each mode. (p. 68)
[Reject],
, Call Functions 20 Tip When the hands free kit is connected to the phone, you can answer calls by pressing the Side keys (up or down). If you have subscribed to the Calling Line Identification (CLI) service and the callers network sends the number, the callers number will appear on the screen. If the callers name and number are stored in the Phonebook, the callers name will appear on the screen. If the number is a restricted number, the display shows Withheld. When receiving a call from the person whose picture is registered in the Phonebook, receiving display and the picture are displayed alternately. Rejecting an Incoming Call You can reject a call you do not wish to answer. 1. Press
[Reject] or press and hold the Side or keys (up or down) whilst the phone is ringing. The caller hears a busy tone. Incall Menus Your phone has additional functions available whilst a call is in progress. 21 Call Functions Adjusting the Earpiece Volume You can adjust the earpiece volume during a call. 1. During a call, press 2. Press to increase the earpiece volume or press
. to decrease the earpiece volume. Each press of by one of 5 levels. or adjusts the earpiece volume
[OK]. 3. Press Tip You can also adjust the earpiece volume using the Side keys (Volume up key or Volume down key) during a call. Putting a Call on Hold This function allows you to manage two calls at the same time. If you wish to make another call whilst you are talking to someone, you can put the current call on hold to call someone else. To make another call during a call 1. During a call, press
[Options] to display the Options Menu. 2. Select Hold, then press
. The current call is put on hold. To retrieve a call, press select Retrieve, then press
[Options] and 3. Enter the phone number you wish to make another call. Tip You can also make another call by entering the phone number during a call instead of steps 1 and 2. The current call is automatically put on hold. Call Waiting This service notifies you of another incoming call whilst you have a call in progress. 1. During a call, press
[Answer] to answer the second call. The first call is put on hold and you can now talk to the second caller. 2. Press
[Options] and select Swap to switch between the two calls. 3. Press
[Options] and select End Call, to end the current call and return to then press the held call. Note You need to set Call Waiting to On if you use Call Waiting service (p. 89). Call Waiting service may not be available on all networks. Contact your network operator for more information. If you do not wish to answer the second call, press
[Reject] in step 1. The call log of the second call will be saved as a missed call. Conference Call Conference call is a call with more than 2 participants. You may include up to 5 participants in a conference call. Making a Conference Call To make a conference call, you must have one active call and one held call. 1. Press 2. Press
. 3. Press
[Options] to display the Options Menu. or to select Multiparty, then press to select Join All, then press or to join the conference call. to end the conference call. 4. Press Note Conference call service may not be available on all networks. Contact your network operator for more information. Call Functions 22 Adding New Participants to the Conference Call 1. Press
[Options] to display the Options Menu. 2. Press
. to select Dial, then press or 3. Enter the number you wish to include in the conference call. to dial.
[Options] to display the Options Menu. or to select Multiparty, then press 4. Press 5. Press 6. Press
. 7. Press or to select Join All, then press to join the conference call. If you wish to add other participants, repeat steps 1 to 7. To Have a Private Conversation with one of the participants If you wish to have a private conversation with one of the participants, you may select the participant from the conference list and put the other participants on hold. 1. During the conference call, select the person that you wish to talk to by pressing or
[Options] to display the Options Menu. to select Multiparty, then press or 2. Press 3. Press
. 4. Press 5. Once you have finished the private conversation, to select Private, then press or
[Options] and select Multiparty, press then press
. To End the Call with a Conference Call Participant 1. During a conference call, select the person who you
[Options] to display the Options Menu. or to select End Call, then press wish to disconnect the call by pressing or 2. Press 3. Press
. 23 Call Functions 6. Press or to select Join All, then press to return to the conference call. Muting the Microphone 1. During a call, press
[Mute] to mute the microphone. To unmute the microphone, press
[Unmute]. Phonebook You can store the phone numbers and E-mail addresses of your friends, family and colleagues in the Phonebook. Group name (p. 26) You can classify the phone numbers and names stored in the Phonebook, such as Family and Business. Entering Characters When entering characters to create Phonebook entries, SMS or MMS, etc., press the corresponding keys. Table of Characters Pressing each key scrolls characters in the following order. Normal Mode Key Upper Case Characters Lower Case Characters Numeric
. (full-stop) , (comma) - (hyphen) ? !
(apostrophe) @ _ ( ) / :1 ABC2 abc2 DEF3 GHI4 def3 ghi4 1 2 3 4 Key Upper Case Characters Lower Case Characters Numeric JKL5 jkl5 MNO6 mno6 PQRS7 TUV8 WXYZ9 pqrs7 tuv8 wxyz9
(space)+ = < >
$ % &0
*+P?
5 6 7 8 9 0 Normal/T9 (long press)
(space)
: Press and hold to enter 0 - 9 numbers. Press and hold to shift Sentence mode, Capital letter, Small letter, Numeric. Phonebook 24 for Changing the Input Mode To change the input mode, press approximately 2 seconds. T9 Text Input T9 text input method is a shortcut to enter text easily and quickly. 1. Press and hold 2. Press each key once for any letter you require on is displayed. until that key. To enter the word How, press
. until the correct word is shown if 3. Press or the character combination, that was initially displayed, is not correct. to select the word. 4. Press Note If the correct word is not shown in step 3, enter the correct word again after switching to the normal input mode. Tip If you press instead of step 4, a space is inserted next to the selected word. Symbols and Punctuation To enter symbols or punctuation, press
. 25 Phonebook Using Text Template You can use the sentences registered in Text Templates when entering characters. For details on creating the text template, see Adding Phrases to Text Templates on page 46. 1. Press 2. Press press
[Options] to display the Options Menu. or to select Insert Template, then
. 3. Select a desired text template by pressing
, then press
. or The selected text template will be inserted. Creating a New Entry You can choose either the phone (up to 500) or SIM card memory locations to store the new entry. The amount of phone numbers that you can store to the SIM card is dependant on its capacity. Contact your network operator for SIM details. Phonebook Memories Select the location for storing the Phonebook memory before storing a new entry. 1. Press 2. Press to display the Phonebook menu. or to select Settings, then press
. 3. Press
. or to select Save Nos. to, then press 6. Select a desired number type by pressing then press
. or
, 4. Select SIM Card to store the entry on the SIM or memory or Phone Memory by pressing
, then press
. When selecting Choice, you can choose SIM card or phone memory every time you store a new Phonebook entry. Storing Names and Numbers 1. Press 2. Press press to display the Phonebook menu. or
. to select Add New Name, then If you select Choice in step 4 in Phonebook Memories;
3. Select SIM Card or Phone Memory by pressing or
, then press
. The name entry prompt appears. 4. Enter a name, then press
. For details on entering characters, see Entering Characters on page 24. The phone number prompt appears. 5. Enter the phone number, then press
. Up to 40 digits can be entered. 7. Press
[Save]. You can divide the phone numbers of the Phonebook into groups. You can also register E-
mail address, personal data, and picture/image data.
(See Storing Optional Datafor details.) Repeat steps 2 to 7 to store the second and third phone numbers, if required. Storing Optional Data You can store optional data after entering a phone number. (See Storing Names and Numbers for details.) Note E-mail address, personal data, and picture/image data cannot be stored on the SIM card. Selecting Group Name 1. Press or
, then press
. to highlight the right side of 2. Select a desired group name by pressing or
. then press You can set to display the available group names when you store/edit the Phonebook, see View Groups on page 29. Phonebook 26 Entering E-mail Address 3. Press or
, then press to highlight the right side of 4. Enter the E-mail address, then press Up to 60 characters can be entered. Entering Personal Data 5. Press or
, then press to highlight the right side of
. 6. Enter the personal data, then
. Up to 60 characters can be entered. Storing Picture/Image Data You may store a picture/image for use with the Phonebook. When you receive a call from a person with a Phonebook entry which also has a linked picture/image, when the person calls, the linked picture/image will be displayed. 7. Press to highlight the right side of or
, then press
. 8. Select the desired picture/image, then press
. The selected picture/image will appear on the screen. 27 Phonebook 9. Specify the range for displaying the picture/image by pressing
, or
, then press
. Note The stored picture/image are automatically saved under the in Phonebook section of the Saved Pictures. The picture/image cannot be deleted in the Saved Pictures. Remove the picture/image data from the Phonebook. Adding the Phone Number from the Call Log Entries 1. Display the call log entry you wish to store (p. 77). 2. Press 3. Press press to select Save to Phonebook, then
. or
. 4. Follow the procedure from step 3 in Storing Names and Numbers on page 26. Storing after Inputting a Phone Number 1. Enter the phone number, then press 2. Follow the procedure from steps 2 to 7 in Storing
[Save]. Names and Numbers on page 26. to display the Phonebook menu. Finding a Name and Number Two methods of searching through the Phonebook are available:
Search by Name 1. Press 2. Select View Names, then press 3. Enter a name or the first character(s) of the name. Matched results will be displayed alphabetically. If there is no entry in the Phonebook that satisfies the exact search criteria, the name that is nearest alphabetically matching will be displayed. The registered names and phone numbers in the selected entry are alternately displayed. 4. Scroll through list by pressing the desired name, then press The detailed screen of the Phonebook appears. to select or
[Select]. 5. Press 6. Press
. or then press to select the desired phone number, to dial. Tip If you press and select Search after step 2, you can also search the name and number. You can also dial the desired phone number by pressing the digit key corresponding to the list number instead of step 6. Search in Alphabetical Order 1. Press whilst in stand-by to open the or Phonebook. 2. Scroll the list by pressing desired name. or to find the 3. If you wish to do a name search, perform steps 3 and 4 in Search by Name. Editing Phonebook Entries You can edit Phonebook entries. 1. Search for the desired Phonebook entry. For details on searching through Phonebook entries, see Finding a Name and Number . 2. Press 3. Press 4. Select an entry you wish to change by pressing to select Edit, then press
. or
. or
, then press
[Edit]. Phonebook 28 5. Edit entry as required. 6. Press
. If you wish to edit another item, repeat steps 4 to 6. 7. Press
[Save] to save the change(s). Deleting Phonebook Entries 1. Search for the desired Phonebook entries. For details on searching through Phonebook entries, see Finding a Name and Number on page 28. 2. Press 3. Press 4. Select Yes, then press
. or
. to select Delete, then press
. The selected entry will be deleted. To cancel deletion, select No at step 4, then press
. Checking Your Own Numbers You can check and edit your own voice, data and fax phone numbers in the Phonebook. 1. Press 2. Press to display the Phonebook menu. or to select Own Numbers, then press
. 29 Phonebook 3. Press or to select the phone number you wish to check from either Voice, Data or Fax, then press Press to return to the stand-by screen. Note Data or Fax may not be displayed depending on SIM card. Editing Your Phone Numbers 1. Perform steps 1 to 3 in Checking Your Own Numbers.
[Clear] to erase the phone number and 2. Press 3. Press enter a new phone number. to save the phone number. 4. Press View Groups You can set the available group names when you store/
edit the Phonebook. 1. Press 2. Press 3. Select View Groups, then press to display the Phonebook menu. or to select Settings, then press
. 4. Select a desired group name by pressing
. indicates that the group has been selected. To cancel the selected group, press The checkbox becomes blank again. Press to return to the stand-by screen. again. Memory Status This function helps you to check the number of entries stored in the Phonebook. 1. Press 2. Press 3. Press press to display the Phonebook menu. or or
. to select Settings, then press to select Memory Status, then
. You can check the following memory status. SIM Card : xxx/xxx Speed Dial : xx/xx Phone Press to return to the stand-by screen.
: xxx/500 Note The number of locations available on the SIM is dependant on its capacity. Speed Dial List You can set a maximum of 9 phone numbers to the Speed Dial List. Adding Phonebook entries to the Speed Dial List 1. Search for the desired Phonebook entries. For details on searching through Phonebook entries, see Finding a Name and Number on page 28. or
. or to select the phone number. to select Add to Speed, then press 2. Press 3. Press 4. Press
. 5. Select the number you wish to add by pressing or
, then press
. Viewing the Speed Dial List 1. Press 2. Press 3. Press press The stored names and phone numbers in the selected entry are displayed in order. to display the Phonebook menu. or or
. to select Settings, then press to select Speed Dial List, then
. Phonebook 30 Sending Messages 1. Search for the desired Phonebook entries. For details on searching through Phonebook entries, see Finding a Name and Number on page 28. 2. Press or
, to highlight the right side of or
, then press or to highlight the right side of
, then press
. or Press 3. Press press or
. to select Send Message, then in step 2:
If you highlight the right side of 4. Press press or
. to select MMS or SMS, then
, or 5. Enter your message. For details on creating a message, see Creating a New MMS on page 106 or Creating a New SMS on page 114. 31 Phonebook
, the screen goes back one by to navigate to required location. to access function. during stand-by mode. or or Using the Menu Using the Main Menu 1. Press 2. Press 3. Press To Select Another Item within the Main Menu To return to the previous screen after selecting a function from the Main Menu or Sub Menu, press Every time you press one. Operation Guidance Your phone uses softkeys to help you to navigate the phone (
). These keys change usage depending on the situation. The function of each softkey at any given time is highlighted at the bottom left and bottom right of the screen. Shortcut Keys When pressing several key combinations during stand-
by mode, you can shortcut to the specified menus. To access the desired menu directly, press keys for the menus corresponding number during stand-by mode. See the following table as reference. and digit and Example: To access Language Sub Menu using shortcut keys Press
. Note The shortcut keys work for the first three menu levels only. Side Keys The Side keys (up or down) function the same as pressing or
. Using the Menu 32 List of Menu Functions Menu No./
Main Menu 1 Camera 2 My Phone 3 Fun & Games 4 Profiles 5 Organiser 6 Call Manager Menu No./
Sub Menu1 1 Image Gallery 2 Sound Gallery 3 Text Templates 4 Memory Status 1 Games 2 Melody Editor 3 Tone Editor 1 Normal 2 Meeting 3 Activity 4 Car 5 Silent 1 Calculator 2 Calendar 3 Clock & Alarm 4 Voice Memo 5 Help List 1 Phonebook 2 Call Register 3 Diverts 33 Using the Menu Menu No./
Main Menu 7 Settings Menu No./
Sub Menu1 1 Phone Settings 2 Call Settings 3 Network Settings 4 Internet Settings 5 Infrared 6 Security 7 Master Reset 8 Browser 1 Homepage 2 Bookmark 9 Info-Service 0 Messages
1 MMS 2 SMS 3 Cell Broadcast 4 Cell Info 5 Voicemail
* Depends on the contents of SIM card.
(M 1) Camera Your phone incorporates an integrated digital camera. This allows you to take and send pictures wherever you are. Taking Pictures Put the phone into the camera mode to take a picture. You can send the pictures registered in the Saved Pictures with your message. 1. Press and hold whilst stand-by. The phone switches to the camera mode. The camera view can be seen through the on screen viewer. for approximately 2 seconds or the Side keys (up or down) to take the 2. Press picture. The shutter sound occurs and the static image of the taken picture is displayed. 3. Press
[Save]. Save to My Phone is displayed, then the picture is registered. If you send a picture by MMS after taking the picture, press The camera returns to step 1 repeat process as desired. in step 3. to return to stand-by. 4. Press Tip To leave Camera Mode without registering the taken picture after step 3 in Taking Pictures:
Press and select Yes, then press
. To take a picture of yourself, press or the Side keys (up or down) whilst checking the image reflected on the mirror on the back of the phone. Place/Hold the phone at least 40 cm away from yourself.
[Zoom] to magnify the photographic subject.
[Wide] to restore the original magnification. Using the Zoom Function Press Press Note When Select Picture Size is set to Large, you cannot use the zoom function. To select the picture size 1. Press
[Options] before step 2 in Taking Pictures to display the Options Menu. 2. Press press or
. to select Select Picture Size, then 3. Select the picture size by pressing press
. or
, then Camera 34 To select the mode 1. Press
[Options] before step 2 in Taking Pictures on page 34 to display the Options Menu. to select Select Mode, then press or 2. Press
. 3. Select the mode by pressing
. or
, then press Note Vertical stripes may be reflected to a picture by light source. Change the mode in this case.
[Back]. Retaking Pictures After steps 1 and 2 in Taking Pictures on page 34, press Further shooting is available. Note The Digital Camera Uses a C-MOS Sensor. Although this camera has been manufactured to the highest specification, some pictures may still appear too bright or too dark. If the phone has been left in a warm place for a long time before taking or registering a picture, the picture quality may be poor. 35 Camera In the Case of No Available Memory When the number of pictures that can be taken becomes 5 or less, or when the remaining capacity becomes 27.5 Kbytes (when Medium is selected as the picture size) or less, will appear on screen. The screen returns to step 2 in Taking Pictures on page 34. The number of pictures that can be taken is displayed in the upper left of the screen. (The number of pictures that can be taken is approximate.) When the number of pictures that can be taken becomes 0, and when you try to take a picture again, Can not take a picture. Maximum Capacity is displayed. Meanings of Indicators in Camera Mode Delay timer indicator (p. 36)
: Whilst the timer setting is on. Picture brightness indicators (p. 36)
: Bright
: Normal
: Dark Picture size indicators (p. 34) Large:
288 352 dots Medium (default): 120 160 dots Small:
60 80 dots Mode indicator (p. 35)
: Mode 1
: Mode 2 Making Adjustments According to Lighting Conditions Adjusting the Brightness of the Picture Adjust the brightness of the picture by pressing or
. Once the phone has returned to the stand-by screen the brightness settings return to default. Viewing the Taken Pictures The taken pictures can be viewed in the Saved Pictures. 1. In camera mode, press
[Options]. The Options Menu is displayed. 2. Select Existing Pictures, then press
. The Saved Pictures is displayed. 3. Select the file name you wish to view by pressing or
, then press
. The selected picture is displayed. 4. Once you have finished, press to the list. Tip Your pictures are given file names which show the time and date when the picture was taken. Example:
The file name 13-05-02_12-34-56 is displayed for the picture taken at 12:34:56 of 13th May 2002. The file names of your pictures can be changed (p. 41). Using the Timer Taking a Picture with the Timer 1. In camera mode, press
[Options]. The Options Menu is displayed. 2. Press
. 3. Press or to select Delay Timer, then press or to select On, then press
. appears on the screen and the phone returns to camera mode. 4. Press to take the picture.
[Back] to return Delay timer begins. 10 seconds after the timer sound occurs, the camera takes a picture, and sounds a tone. Camera 36 Sending Pictures See Sending Messages on page 42 for instructions. Deleting Pictures See Deleting Pictures/Images on page 42 for instructions. Note Whilst the delay timer is operating, the LED indicator and the icon flash. If is pressed whilst the delay timer is operating, the picture is taken instantly. If there is an incoming call or alarm functioning, is pressed, whilst the delay timer is or operating, the camera operation is cancelled. In this case, the timer setting is cancelled. The zooming function with the adjustment of brightness of the picture with
, is unavailable whilst the delay timer is
[Zoom] / [Wide], or or operating. Cancelling the Delay Timer 1. Press
[Options] whilst the delay timer setting is on. The Options Menu is displayed. 2. Press
. 3. Press or to select Delay Timer, then press or to select Off, then press
. goes off. 37 Camera My Phone My Phone contains several types of picture/image and sound data Also included in My Phone are frequently used text message phrases and accessed WAP pages
(addresses) which you can use and edit. My Phone 38 39 My Phone Image Gallery (M 2-1) Pictures that are taken by a digital camera or images that are downloaded from mobile Internet sites can be managed.
: This is the folder where the pictures/images registered in the Phonebook are saved. Images in PNG format Pictures/Images in JPEG format
: Animation in NEVA file (e-Animation file)
Images in GIF format Images in BMP format Images in WBMP format Images in WPNG format The date and time when the photo was taken is displayed as a file name for the picture. Downloading Picture/Image File 1. Press 2. Press
. to display the Main Menu. or to select My Phone, then press 3. Select Image Gallery, then press 4. Select Download More, then press
. The picture/image file download site is displayed. My Phone 40 Viewing Pictures/Images 1. Press 2. Press
. to display the Main Menu. or to select My Phone, then press 3. Select Image Gallery, then press 4. Select Saved Pictures, then press
. The Saved Pictures is displayed. 5. Select the file name you wish to view by pressing or
, then press
. The selected picture/image is displayed. 6. Once you have confirmed the picture/image, press
[Back] to return to the Saved Pictures. Checking the Picture/Image Data Select the desired data in step 5 in Viewing Pictures/
Images, then select File Information after pressing
[Options] to display the Options Menu. The file type and size of the selected picture/image are displayed. Whether the picture/image can be copied, forwarded, or saved is also displayed. To return to the Saved Pictures, press
[Back]. 41 My Phone Changing the File Name 1. Perform steps 1 to 4 in Viewing Pictures/Images. 2. Select the file name you wish to change by pressing or
, then press
[Options]. The Options Menu is displayed. 3. Select Rename, then press 4. Enter a new file name. To correct the last character, press briefly. Press and hold
[Clear] to clear all characters.
[Clear]
. 5. Press Note Following characters cannot be used for a file name:
/, \, :, *, ?, ", <, > and . (period). Adjusting the Size of the Picture/Image The pictures/images that are registered in the Saved Pictures can be adjusted for use as a wall paper during stand-by or as an incoming call display. When the picture/image size is modified, the data size is updated. 1. Perform steps 1 to 4 in Viewing Pictures/Images. 2. Select the file name you wish to adjust by pressing or
, then press
[Options]. The Options Menu is displayed. 3. Press
. 4. Select the picture/image size you wish to change by to select Adjust Size, then press or pressing or
, then press
. 5. Specify the range for displaying the picture/image by pressing
, or then press
. 6. Press
. To cancel registration, press before step 6.
[Back] at any time Note Adjust Size may not be available depending on the picture/image original and copyright issued. Sending Messages 1. Perform steps 1 to 4 in Viewing Pictures/Images on page 41. 2. Select the file name you wish to send by pressing or
, then press
[Options]. The Options Menu is displayed. 3. Press press to select Send Message, then or
. 4. Enter your message. For details on creating a message, see Creating a New MMS on page 106. Note Pictures/images with a red icon cannot be sent attached to a message. Deleting Pictures/Images 1. Perform steps 1 to 4 in Viewing Pictures/Images on page 41. 2. Select the file name you wish to delete by pressing or
, then press
[Options]. The Options Menu is displayed. 3. Press 4. Select Yes, then press or
. to select Delete, then press
. The selected picture/image is deleted. To cancel deletion, select No at step 4, then press
. My Phone 42 Playing Back Sounds 1. Press 2. Press
. to display the Main Menu. or to select My Phone, then press 3. Select Sound Gallery, then press 4. Select Saved Sounds, then press
. The Saved Sounds is displayed. 5. Select the sound you wish to play back by pressing or
, then press
. The selected sound is played. To stop playing, press
[Stop]. Checking the Sound Data Select the desired sound as in step 5 in Playing Back Sounds, then select File Information after pressing
[Options]. The file type and size of the selected sound are displayed. Whether the sound can be copied, forwarded or saved is also displayed. To return to the Saved Sounds, press
[Back]. Sound Gallery (M 2-2) The ring tones instead created by Melody Editor and the WAVE data recorded by Voice Memo are managed in the Saved Sounds. Default ring tones are not contained.
: Sound file in SMAF format
: Original ringing tone (composed in Melody Editor)
: Sound file in Standard MIDI format
: Sound file in i Melody format
: Sound file in WAVE format Note SMAF (Synthetic music Mobile Application Format) is a format of music data for mobile phones. Downloading Sound Files 1. Press 2. Press
. to display the Main Menu. or to select My Phone, then press 3. Select Sound Gallery, then press 4. Select Download More, then press
. The sound file downloaded site is displayed. 43 My Phone Changing the File Name 1. Perform steps 1 to 4 in Playing Back Sounds on page 43. Setting the Tone and Strength 1. Perform steps 1 to 4 in Playing Back Sounds on page 43. 2. Select the file name you wish to change by pressing or
, then press
[Options]. The Options Menu is displayed. 3. Select Rename, then press 4. Enter a new file name. To delete the last character, press briefly. Press and hold
[Clear] to clear all characters.
[Clear]
. 5. Press Note Following characters cannot be used for a file name:
/, \, :, *, ?, ", <, > and . (period). Tip When Data Edit is displayed in the menu in step 2, you are able to edit the sound (p. 57). Once you have completed editing the newly saved file overwrites the old file. This new file then becomes the original ring tone. 2. Select the file name you wish to edit by pressing
, then press or
[Options]. The Options Menu is displayed. 3. Press or to select Tone Set or Strength Set, then press For full details, see pages 55 to 57. Note If Tone Set and Strength Set are not displayed in the menu in step 2, you cannot change the settings. Sending Messages 1. Perform steps 1 to 4 in Playing Back Sounds on page 43. 2. Select the file name you wish to send by pressing or
, then press
[Options]. The Options Menu is displayed. 3. Press press to select Send Message, then or
. If you select your original ringing tone in step 2;
4. Press to select the file format SMAF, or MIDI or i Melody, then press
. My Phone 44 5. Enter your message. For details on creating a message, see Creating a New MMS on page 106. Note Sounds with a red icon cannot be sent attached to a message. Only the first part of the data will be converted if you select i Melody in step 4. Deleting Sounds 1. Perform steps 1 to 4 in Playing Back Sounds on page 43. 2. Select the file name you wish to delete by pressing or
, then press
[Options]. The Options Menu is displayed. 3. Press 4. Select Yes, then press or
. to select Delete, then press
. The selected sound has been deleted. To cancel deletion, select No at step 4, then press
. 45 My Phone Text Templates (M 2-3) You can register up to 20 text templates for use in SMS and MMS. You can input messages or others more easily by registering frequently used text. 128 characters may be registered in any text template. Adding Phrases to Text Templates 1. Press to display the Main Menu. 2. Press or
. 3. Press to select My Phone, then press to select Text Templates, or then press The list of Text Templates is displayed. 4. Select the number you wish to register by pressing or
, then press 5. Enter the text, then press
. For details on entering characters, see Entering Characters on page 24. Editing Text Templates 1. Perform steps 1 to 3 in Adding Phrases to Text Templates. 2. Select the number you wish to edit by pressing or
, then press
. My Phone 46 3. Press 4. Enter new text. or to select Edit, then press
. 4. Select Yes, then press
[Clear]
The selected text template is deleted. To cancel deletion, select No at step 4, then press
. Memory Status (M 2-4) This function helps you to check the memory status of the Galleries. 1. Press 2. Press
. 3. Press press to display the Main Menu. or to select My Phone, then press to select Memory Status, then or
. To correct the last character, press briefly. Press and hold
[Clear] to clear all characters. 5. Press Viewing Text Templates 1. Perform steps 1 to 3 in Adding Phrases to Text Templates on page 46. 2. Select the number you wish to view by pressing or
, then press
. 3. Press or to select Confirm, then press The selected text template is displayed. 4. After confirmation, press
[Back] to return to template list. Deleting Text Templates 1. Perform steps 1 to 3 in Adding Phrases to Text Templates on page 46. 2. Select the text template you wish to delete by pressing or
, then press
. 3. Press or to select Delete, then press
. 47 My Phone Fun & Games Fun & Games 48 49 Fun & Games Fun & Games 50 Note If an incoming call is detected during gameplay, the game will be stopped. Game Guide 1. Perform steps 1 to 4 in Starting Games. 2. Press to select Guide, then press or Game instructions are displayed. Collection Hunter (M 3-1-2) Check of a collection and reset of a game can be performed in Collection Hunter. To Check Collection 1. Perform steps 1 to 3 in Starting Games. 2. Press to select Collection Hunter, or then press 3. Press or then press to select Collection View,
. To Reset the Game 1. Perform steps 1 to 3 in Starting Games. 2. Press to select Collection Hunter, or then press 3. Select Reset Game, then press 4. Press to select Yes, then press or
. Games (M 3-1) Your phone comes complete with 3 games (PK Game, Collection Hunter, Air Hockey). You can enjoy these 3 games soon after purchase. Starting Games 1. Press 2. Press press 3. Press
. to select Fun & Games, then to display the Main Menu. or
. or to select Games, then press The game list is displayed. 4. Press press to select the desired game, then or
. 5. Select New Game, then press 6. When you have finished playing, press
. 51 Fun & Games Air Hockey (M 3-1-3) The level of the game can be chosen for Air Hockey. To Select a Game Level 1. Perform steps 1 to 3 in Starting Games on page 51. to select Air Hockey, then press or 2. Press
. 3. Press 4. Press Setting up Game Options (M 3-1-4) 1. Perform steps 1 to 3 in Starting Games on to select Level, then press to select the level, then press or or
. page 51. to select Game Settings, then to select Backlight or Enable Vibrate to change the settings, then press
. or to select On or Off, then press or
. or 2. Press press 3. Press 4. Press
. 5. Press or to select Sound Volume to adjust the sound volume, then press
. 6. Press to increase the sound volume or press to decrease the sound volume and then press
. 6. Press Note If you wish to mute the sound during gameplay, press
. Press again to return the volume. Melody Editor (M 3-2) You can create an original ringing tone by yourself, or you can send a melody attached to an MMS. You can input up to 190 tones 16 chords, or 380 tones 8 chords per melody. The original ringing tone is registered in the Saved Sounds. Creating Your Original Ringing Tone (M 3-2-1) 1. Press 2. Press to display the Main Menu. or to select Fun & Games, then press
. 3. Press or then press to select Melody Editor,
. 4. Select Create New, then press 5. Enter the title. Up to 24 characters can be entered. For details on entering characters, see Entering Characters on page 24. Fun & Games 52 or to select a tempo, then press 7. Press The music tempo is described below. Allegro (Fast):
Moderato (Normal):
Andante (Slow):
Adagio (Very Slow):
Tempo is defined by the number of crotchets (
played per minute. 8. Select 8 Chords or 16 Chords by pressing 150 125 107 94 or
, then press
) 9. Specify the musical scale and rest using the digit keys. For details on specifying the sound level and rest, see Specify the Musical Scale and Rest on page 54. 10.Specify the types of musical notes or rest using or keys. For details on specifying the musical notes and rest, Specifying the Types of Notes and Rests on page 54. 11.Press key after inputting one note. Input the next note after the cursor moves to the right. 53 Fun & Games
. 12.Repeat steps 9 to 11 to input notes.
[Options] and select Play during input, the melody that When you press you have entered is played back. When you press before Cursor whilst entering notes, the melody, that is displayed on the screen, is played back up to the cursor position. When you press
[Options] and select Select Chord, you can select another chord. Repeat steps 9 to 11 to input notes for the new chord. 13.When you finish inputting, press
[Options] to display the Options Menu. 14.Select Save, then press 15.Press press Your original ringing tone is registered in the Saved Sounds. to select Save to My Phone, then or
. Note If the capacity or memory in the Saved Sounds becomes insufficient, the message of Maximum Capacity : 80 Not registered or Not registered. Memory Full is displayed respectively. At that time, the display returns to the screen of step 15. Try again after deleting unnecessary data (p. 45). Specify the Musical Scale and Rest Using the key shown below, specify the musical scale and rest. Specifying the Types of Notes and Rests Specify notes and rests by pressing or repeatedly. Do Re Mi Fa Sol La Ti Rest When you press the key shown above once, a crotchet is specified in the middle scale (no mark). When you press the same key repeatedly, the note will shift cycle through the available octave ranges. When you press note will raise one semitone higher or lower. When entering rest: Crotchet rest is entered. or whilst a note is selected, the
( ) Crotchet (Crotchet rest)
( ) Quaver (Quaver rest)
( ) Semiquaver (Semiquaver rest)
( ) Semibreve (Semibreve rest)
( ) Minim (Minim rest) When you make a dotted note or triplet, press after selecting the target note. Fun & Games 54 Note You cannot make a dotted semiquaver (semiquaver rest) or a dotted semibreve (semibreve rest). after selecting the target Three continuous notes are required for triplet. To specify a tie, press notes. An underscore (_) is displayed next to the note, and the note is tied with the next one. To enter the next note, press the right. Then, repeat the operation on the previous page. If the cursor is positioned next to a note, you can repeat the note immediately left of the cursor when is pressed. and move the cursor to or Set the Tone The phone can play notes using different instruments. 1. Perform steps 1 to 13 in Creating Your Original Ringing Tone on page 52. 2. Press
. or to select Tone Set, then press 3. Select a category of the tone by pressing 4. Select a tone by pressing
. When Play Current Chord is selected, the melody entered is played back in the selected tone. When Confirm Tones is selected, the syllable names are played back in the selected tone. or
, then press or 5. Select OK, then press
. Now you can create a melody. You can select from the following 128 tones. Category Tone Category Tone Pianos Piano Bright Piano E. Grand Piano Honky-Tonk Electric Piano 1 Electric Piano 2 Harpsichord Clavi Chimes Celesta Glockenspiel Music Box Vibraphone Marimba Xylophone Tubular Bells Dulcimer 55 Fun & Games Category Tone Category Tone Category Tone Category Tone Organs Basses Strings 2 Drawbar Organ Perc. Organ Rock Organ Church Organ Reed Organ Accordion Harmonica Tango Accordion Acoustic Bass Finger Bass Pick Bass Fretless Bass Slap Bass 1 Slap Bass 2 Synth Bass 1 Synth Bass 2 Str. Ensemble 1 Str. Ensemble 2 Synth Strings 1 Synth Strings 2 Choir Aahs Voice Oohs Synth Voice Orchestra Hit Guitars Strings 1 Brasses Nylon Guitar Steel Guitar Jazz Guitar Clean Guitar Muted Guitar Overdriven Gtr. Distortion Gtr. Gtr. Harmonics Violin Viola Cello Contrabass Tremolo Strings Pizz. Strings Harp Timpani Trumpet Trombone Tuba Muted Trumpet French Horn Brass Section Synth Brass 1 Synth Brass 2 Reeds Synth Leads Synth Effects Soprano Sax Alto Sax Tenor Sax Baritone Sax Oboe English Horn Bassoon Clarinet Square Lead Sawtooth Lead Calliope Lead Chiff Lead Charang Lead Voice Lead Fifth Lead Bass & Lead Rain Soundtrack Crystal Atmosphere Brightness Goblins Echoes Science Fiction Flutes/
Pipes Synth Pads Ethnics Piccolo Flute Recorder Pan Flute Blown Bottle Shakuhachi Whistle Ocarina New Age Pad Warm Pad Polysynth Pad Choir Pad Bowed Pad Metallic Pad Halo Pad Sweep Pad Sitar Banjo Shamisen Koto Kalimba Bagpipe Fiddle Shanai Fun & Games 56 Category Percus-
sions Original Category Effects Tone Tinkle Bell Agogo Steel Drums Woodblock Taiko Drums Melodic Tom Synth Drum Reverse Cymbal Original 1 (Piano)*
Original 2 (Glockenspiel)*
Original 3 (Reed Organ)*
Original 4 (Nylon Guitar)*
Original 5 (Violin)*
Tone Gtr. Fret Noise Breath Noise Seashore Bird Tweet Telephone Ring Helicopter Applause Gunshot Setting the Strength of the Original Ringing Tone The strength of the original ringing tone can be set in 3 levels for each melody. When you purchase this phone, the strength of the original ringing tone is set to forte (Loud). 1. Perform steps 1 to 13 in Creating Your Original Ringing Tone on page 52. 2. Press
. or to select Strength Set, then press
* The default setting tone. To create your original tone, see Creating Your Original Tone on page 61. 57 Fun & Games 3. Select a strength of the tone by pressing or
. then press When Play Current Chord is selected, the original ringing tone entered is played back in the selected strength of the tone. 4. Select OK, then press
. Now you can create an original ringing tone. Deleting an Original Ringing Tone Perform steps 1 to 4 inDeleting Sounds on page 45. Editing Original Ringing Tones 1. Perform steps 1 to 3 in Creating Your Original Ringing Tone on page 52. 2. Press press or
. to select Existing Melodies, then 3. Press or to select an original ringing tone you wish to edit, then press The Options Menu is displayed.
[Options]. or to select Data Edit, then press 4. Press
. 5. Edit the title and press 6. Press 7. Press press or or
. to select a tempo, then press
. to select the number of chords, then 8. Select a note you wish to change by pressing
, then edit notes. or For details on editing tones, see Tone Editor on page 59. When you add notes, enter the note correctly on the cursor. To delete a note, press Press and hold
[Clear] briefly.
[Clear] to clear all tones. 9. When you finish editing, press
[Options] to display the Options Menu. 10.Select Save, then press 11.Select Save to My Phone, then press
. 12.Press
. or to select Over Write, then press The original ringing tone is changed. If you select New, the melody before the correction is not modified. The original ringing tone is registered as a new original ringing tone. Note When the number of chords is modified in step 7, the confirmation screen may be displayed. When you select Yes, a section of the melody may be deleted. When you are going to add notes in step 8, you cannot add any notes if you have already entered 380 notes
(for 8 chords melodies) or 190 notes (for 16 chords melodies). Tip To delete the continuous melody, press
[Options]
and then press Cursor or DEL before Cursor. You can delete the melody after the cursor or before the Cursor. after selecting DEL after
. Fun & Games 58 Copying and Pasting Notes You can copy and move a part of a melody to another position. Only original ringing tones or editable melodies can be copied or moved. 1. Perform steps 1 to 7 in Editing Original Ringing Tones on page 57. 2. Press 3. Press press
[Options] to display the Options Menu. or to select Copy or Cut, then
. 4. Move the cursor to the first note to be copied or to be cut and press
. 5. Move the cursor to the last note to highlight the area
. and press The highlighted area will be saved temporarily in the memory. 6. Press
[Options] to display the Options Menu. 7. Press
. or 8. Move the cursor to the point you wish to paste the to select Paste, then press notes, then press Saved notes are pasted. Tone Editor (M 3-3) You can make a tone and use it for the original ringing tone. Up to five types of tones can be registered respectively for 8 chords and 16 chords. FM Sound Source Various types of tones can be composed by combining the functions that generate one sine wave called an Operator. The combination of the operator is called an algorithm. The operator acts as the modulator (modulating part) or the carrier (modulated part) depending on the algorithm. In each operator, various parameters such as multiple or envelope can be set. By setting the feedback to the specified operator, wider tone ranges can be created. 59 Fun & Games Setting an Algorithm Set the combination of the operator. Select from 4 types of combinations in 8 chords, and 2 types in 16 chords. 8 Chords Algorithm3 Algorithm4 Algorithm5 Algorithm6 16 Chords Algorithm1 Algorithm2
(Green number): The modulator (modulating part)
(White number): The carrier (modulated part) Setting the Operator The meaning and content of the parameter that can be set to the operator is described below. Parameter Multiple
(13 levels) Envelope
(Continu-
ous/Decay) Sustain
(On/Off) Key Scale Rate
(2 levels) Key Scale Level
(4 levels) Total Level
(64 levels) Attack Rate
(15 levels) Meaning When the value of the carrier is large, the sound becomes high. You can set various types of notes by changing the values of the modulator. This sets continuous same note or fade-out. This sets a note to be sustained after com-
pleting the note. If you want to have a note with reverberation, set this function on. Set the function to 2 if you want to a short note. This function sets the rate of reducing the volume as a note becomes higher. In the carrier, the volume becomes large as this level becomes higher. In the modulator, the melody becomes brighter as this level becomes higher. The melody becomes softer as this level becomes smaller. This sets the time from the beginning of the sound to the maximum volume. Fun & Games 60 Parameter Decay Rate
(16 levels) Sustain Level
(16 levels) Release Rate
(16 levels) Wave Shape
(8 types) Vibrato
(4 levels/
Off) Tremolo
(4 levels/
Off) Feedback
(8 levels) Meaning This sets the time from the maximum volume to the volume of the sustain level. In sustaining note, this displays the volume of the sound that continues to produce. In fading-out note, this displays the volume when the note starts fading-out. In sustaining note, this displays the sustain-
ing time from note completion to no sound. In fading-out note, this displays the time from starting fade-out to no sound. Select the basic wave type from eight types. Type 1 Type 2 Type 3 Type 4 Type 5 Type 6 Type 7 Type 8 Set the vibrato. If the vibrato is used, select from 4 levels. Set the tremolo. If the tremolo is used, select from 4 levels. Set the level of modulation in the modulator feedback for Operator 1. 61 Fun & Games Set the Effect Frequency Define the frequency of the vibrato or tremolo. The frequency becomes faster as the figure increases. Creating Your Original Tone 1. Press 2. Press press 3. Press
. to display the Main Menu. or
. or to select Fun & Games, then to select Tone Editor, then press 4. Select For 8 Chords or For 16 Chords by pressing or
, then press
. 5. Select the number you wish to register and press to select Rename, then press
. 6. Press 7. Enter the title. or Up to 16 characters can be entered. For details on entering characters, see Entering Characters on page 24. 8. Press 9. Press press
. or
. to select Base Tone Set, then 10.Select a category of the tone by pressing or
. 11.Select a base tone by pressing
. or
, then press When Confirm Tones is selected, the syllable names are played back in the selected tone. 12.Select OK, then press 13.Press press 14.Press
. or
. or to select Details Editor, then to select Algorithm x, then press 15.Select an algorithm you wish to set by pressing
, then press or If you do not wish to change the operator, skip to step 20. 16.Select an operator you wish to change by pressing or
, then press
. The basic note parameter is set in advance. 17.Select a parameter you wish to change by pressing or
. 18.Press or to change the content of the parameter. For details of parameter, see pages 60 to 61. When you press back in the selected content of the parameter. Repeat steps 17 and 18 to change another content of the parameter. or to select Setup End, then press
, the syllable names are played 19.Press
. If you do not wish to change the effect frequency, skip to step 22. 20.Press press to select Effect Frequency, then or
. 21.Select the effect frequency you wish to set by pressing or
, then press
. 22.Press
. 23.Press or to select Details End, then press or to select Save, then press
. Your original tone is registered. Fun & Games 62
(M 4) Profiles You can easily alter the phone tone (e.g. the ringer volume, keypad tones, etc.) according to your environment. Tone sound and vibration set can be customized for each profile. There are 5 profiles including one user definable profile:
Normal Meeting Activity Car Silent Activating a Profile 1. Press 2. Press 3. Select the profile you wish to activate by pressing to display the Main Menu. or to select Profiles, then press or 4. Press
, then press or
. to select Activate, then press The profile will now be activated. 63 Profiles Note When a profile is set, the icon which corresponds to the profile name appears in the stand-by screen:
Normal:
Meeting:
Activity:
Car:
Silent:
Is the default setup. (not displayed in the stand-by screen) For use when discretion is needed. For use in busy environments. For use in the car. (connected to a hands free kit) For use when silence is needed. All sounds are muted and you are alerted to calls with the vibrator. Tip You can also activate a profile by pressing and for approximately 2 seconds instead of holding steps 1and 2. Customising Profiles 1. Perform steps 1 and 2 in Activating a Profile. 2. Select the profile you wish to customise by pressing or 3. Press 4. Select the setting you wish to customise by pressing to select Edit, then press
, then press or
. or
, then press
. 5. Change the setting you want. For details about settings, see pages 64 to 68. Resetting Profile Settings 1. Perform steps 1 and 2 in Activating a Profile on page 63. 2. Select the profile you wish to reset by pressing or
, then press
. 3. Press 4. Press press or or
. to select Edit, then press
. to select Set to Default, then 5. Enter your handset code, then press 6. Press to select Yes, then press or
. Ringer Volume You can adjust the ringer volume to one of 5 levels. When it is set to Silent, the volume of games is muted. 1. Perform steps 1 to 3 in Customising Profiles on page 63. 2. Press press The current volume level is displayed. or
. to select Ringer Volume, then 3. Press to increase the ringer volume or press to decrease the ringer volume and then press To select Step Tone, press To select Silent, press at level 1. at level 5. To cancel the resetting, select No, then press
. Note If you enter a wrong handset code in step 5, the screen returns to step 4. Ringer Type You can select the ringing tone from 30 tones including 5 patterns, 15 sound effects and 10 melodies. You can also select a sound in the Saved Sounds as the default ringing tone excluding the WAVE format. 1. Perform steps 1 to 3 in Customising Profiles on page 63. 2. Press press or
. to select Assign Melody, then Profiles 64 3. Press or to select Preset Melody or Sound Gallery, followed by
. 4. Select the ringing tone you wish to use by pressing or
[Play]. If you wish to hear the demo, press To stop playing, press
[Stop]. 5. When selection is complete, press Vibration When the vibrator option is set to on, the phone will vibrate for incoming calls regardless of the ringer volume and tone settings. 1. Perform steps 1 to 3 in Customising Profiles on
. page 63. or to select Vibration, then press or to select Enable, Disable or Link to Sound, then press
. 2. Press
. 3. Press Tip When Link to Sound is selected in step 3, melodies are synchronised with the vibrator for the ringing tone. However, this function may not work depending on data. When you select Enable or Link to Sound in step appears on the stand-by screen. 3, Keypad Tones When the keypad tone is set to on, you will hear a confirmation tone each time you press a numerical key. 1. Perform steps 1 to 3 in Customising Profiles on page 63. 2. Press press 3. Press
. or
. or to select Keypad Tones, then to select On or Off, then press If you select Off, the screen returns to step 1. 4. Set Volume, then press 5. Press to increase the volume or press
. decrease the volume, then press
. to 6. Press 7. Press or or to select Melody, then press to select either Preset Melody, Sound Gallery or Default Tone, then press
. 65 Profiles When you select Preset Melody or Sound Gallery in step 7:
8. Select the keypad tone. For details on selecting a ringing tone, see Ringer Type on page 64. or to select Duration, then press 9. Press
. 10.Set the duration by pressing
. or
, then press Warning Tone This function enables your phone to emit the warning tone when an error occurs. 1. Perform steps 1 to 3 in Customising Profiles on page 63. 2. Press press 3. Press
. or
. or to select Warning Tone, then to select On or Off, then press If you select Off, the screen returns to step 1. 4. Select Volume, then press 5. Press to increase the volume or press
. decrease the volume, then press
. 6. Press 7. Press or or to select Melody, then press to select Preset Melody or
. Sound Gallery, then press
. 8. Select the warning tone. For details on selecting a ringing tone, see Ringer Type on page 64. or to select Duration, then press 9. Press
. 10.Select the duration by pressing press
. or
, then Power On/Off Sound You can set up to emit a sound and select the melody, volume and duration when the phone is turned on or off. 1. Perform steps 1 to 3 in Customising Profiles on page 63. 2. Press or to select Power On Sound or Power Off Sound, then press
. to Profiles 66 3. Press
. or to select On or Off, then press If you select Off, the screen returns to step 1. 4. Select Volume, then press 5. Press decrease the volume and then press to increase the volume or press
. to 6. Press 7. Press or or to select Melody, then press to select Preset Melody or
. Sound Gallery, then press
. 8. Select the alarm tone. For details on selecting a ringing tone, see Ringer Type on page 64. or to select Duration, then press 9. Press
. 10.Enter the duration of alarm tone in 2 digits (01 to 10 seconds) using the digit keys, then press
. 67 Profiles 2. Press press 3. Press or
. or Message Alert When receiving messages, special ring tones can be set. 1. Perform steps 1 to 3 in Customising Profiles on page 63. to select Message Alert, then to select MMS, SMS or WAP, then press
. 4. Select Volume, then press 5. Press decrease the volume and then press to increase the volume or press
. to 6. Press 7. Press or or to select Melody, then press to select Preset Melody or
. Sound Gallery, then press
. 8. Select the ringing tone. For details on selecting a ringing tone, see Ringer Type on page 64. or to select Vibration, then press or to select Enable, Disable or Link to Sound, then press
. 9. Press
. 10.Press 11.Press
. or to select Duration, then press 12.Enter the duration of ring tone in 2 digits (01 to 99 seconds) using the digit keys, then press
. Low Battery Alert Adjust the volume of the alarm when the battery becomes low. 1. Perform steps 1 to 3 in Customising Profiles on page 63. to select Low Battery Alert, then 2. Press press 3. Press or
. to increase the volume or press
. decrease the volume and then press to Any Key Answer 1. Perform steps 1 to 3 in Customising Profiles on page 63 2. Select Any Key Answer, then press 3. Select On or Off by pressing or press
, then Profiles 68 Organiser Calculator (M 5-1-1) The calculator function performs the 4 arithmetic calculations using up to 12 digits. 1. Press 2. Press
. to display the Main Menu. or to select Organiser, then press 3. Select Calculator, then press 4. Select Calculator, then press
. The calculator appears on the display. 5. Key operations for calculation are as follows. 6. If you wish to start a new calculation, press
. When calculation is complete, press
[C]. Rate Conversion You can also use the calculator as a currency calculator to convert from/to a home currency using a conversion rate that you enter. To Set a Currency Conversion Rate (M 5-1-2) 1. Perform steps 1 to 3 in Calculator. 2. Press press 3. Press to select Foreign Domestic or to select Exchange Rate, then or
. or Domestic To delete all digits, press Foreign, then press
[Clear]. 4. Enter the currency conversion rate, then press
. To Convert a Value 1. Perform steps 1 to 4 in Calculator. 2. Enter the value to be converted, then press
. To enter a decimal point, press To clear the entered number or operand, press
[C]. To do the calculations, press
. 69 Organiser 3. Press or to select In Domestic or In
. Foreign, then press The result is displayed. If you select Exchange Rate in step 3, you can set a currency conversion rate. 4. When calculation is complete, press Note You cannot perform step 2 when a sign of the four fundamental processes of arithmetic is displayed. Calendar (M 5-2) The Calendar function helps you organise and manage your busy schedule. You can view the stored schedule on a monthly basis. 1. Press 2. Press
. 3. Press
. to display the Main Menu. or to select Organiser, then press to select Calendar, then press or The current month will be displayed and current date will be highlighted. 4. Select the day for the schedule by pressing
, or
, then press
. 5. Press press or
. and select the note number, then 6. Enter the schedule content, press
. Up to 3 schedule items can be stored. For details on entering characters, see Entering Characters on page 24. If you wish to add another item, repeat steps 5 and 6.
[Back]. 7. When you have finished entering, press The screen returns to the calendar. Dates with scheduled tasks/meetings are underlined. Note The calendar can be displayed for dates from January 2000 through to December 2099. Find a Particular Date You can move the view to a specified date in the calendar. 1. Press 2. Select Go to Date, then press 3. Enter the date of the calendar to be displayed, then
[Options] to display the Option Menu. press The specified date is displayed. Organiser 70 Deleting Schedules To Delete Schedule Items 1. Perform steps 1 to 3 in Calendar on page 70. 2. Select the day by pressing or
, then press
. 3. Select the item you wish to delete by pressing
, then press
[Options]. The Options Menu is displayed. or 4. Press 5. Select 1 Data, then press 6. Select Yes, then press
. to select Delete, then press or
. To cancel deleting, select No at step 6, then press
. To Delete All Scheduled Tasks/Meetings for a Specific Day 1. Perform steps 1 to 3 in Calendar on page 70. 2. Select the day you wish to delete by pressing
, or
, then press
[Options].
, The Options Menu is displayed. 3. Press
. 4. Select 1 Day to delete all contents for a day, then to select Delete, then press or press
. 71 Organiser 5. Select Yes, then press
. To cancel deleting, select No at step 5, then press To Delete All Scheduled Entries 1. Perform steps 1 to 3 in Calendar on page 70. 2. Press 3. Press
[Options] to display the Options Menu. or to select Delete to delete all scheduled entries, then press 4. Press or to select All Data to delete all scheduled entries, then press
. 5. Select Yes, then press
. To cancel deleting, select No at step 3, then press
. Clock & Alarm You need to set the correct time and date in order for your phones various time-based functions to work correctly. Setting the Date and Time (M 5-3-4) 1. Press to display the Main Menu. 2. Press or
. 3. Press press to select Organiser, then press to select Clock & Alarm, then or
. 4. Press press or
. to select Set Date/Time, then 5. Enter the day, month, year and time using the digit
. keys, then press When you enter the alarm time in a 12-hour clock format, press The order in which the date and time appears is based on the format setting. See To Select the Date Format. and change am/pm. To Select the Time System 1. Perform steps 1 to 3 in Setting the Date and Time to select Clock Settings, then on page 71. or
. 2. Press press 3. Select Time Format, then press 4. Press or to select 12 hour or 24 hour,
. then press
. To Select the Date Format The date format can be switched between Day-Month-
Year, Month-Day-Year or Year-Month-Day. 1. Perform steps 1 to 3 in Setting the Date and Time to select Clock Settings, then on page 71. or
. 2. Press press 3. Press
. 4. Press or to select Date Format, then press or to select D-M-Y, M-D-Y or Y-M-D, then press
. To Set the Clock Display 1. Perform steps 1 to 3 in Setting the Date and Time to select Clock Settings, then to select Display Format, then on page 71. or
. or
. or 2. Press press 3. Press press 4. Press to select Time Only, Date Only or Date & Time, then press To set hide clock, select Off at step 4, then press
. When Wall Paper is set to On, the date is not displayed in the main screen. To Set Daylight Saving Time You can switch to daylight saving time without having to change the clock time itself. 1. Perform steps 1 to 3 in Setting the Date and Time on page 71. Organiser 72 or
. or
. or to select Clock Settings, then to select Daylight Saving, then 2. Press press 3. Press press 4. Press Setting the Time Zone (M 5-3-3) 1. Perform steps 1 to 3 in Setting the Date and Time to select On, then press
. on page 71. or 2. Press then press to select Set Time Zone,
. 3. Select Change Zone, then press 4. Press To Customise the Time Zone 1. Perform steps 1 to 3 in Setting the Date and Time to set the home city, then press or
. on page 71. or
. or
. 2. Press press 3. Press press to select Set Time Zone, then to select Set Custom Zone, then 4. Enter the time using the digit keys, then press
. Each press of switches - and +. 73 Organiser Setting Alarm (M 5-3-1) Alarm function allows you to be alerted at a specified time. Note that the alarm may not function correctly if the clock has not been set. 1. Press 2. Press
. 3. Press press to display the Main Menu. or to select Organiser, then press to select Clock & Alarm, then or
. 4. Select Set Alarm, then press 5. Select List Alarm, then press 6. Press or
. then press Up to 5 alarm times can be specified. to select the desired alarm number, 7. Select Set Time, then press 8. Enter the alarm time using the digit keys, then press
. When you enter the alarm time in a 12-hour clock format, press or to select Repeat Daily, then press and change am/pm. 9. Press
. or or to select Alarm Status, then press to select On or Off, then press 10.Press
. 11.Press
. 12.Press To Change the Type of Alarm Tone 1. Perform steps 1 to 6 in Setting Alarm on page 73. 2. Press to select Alarm Tone, then press
. to select On, then press or or
. 3. Select Melody, then press 4. Press or Sound Gallery, then press
. to select Preset Melody or 5. Select the alarm tone. If you wish to hear the demo play, press To stop playing, press
[Stop]. 6. When selection is complete, press
[Play]. or To Change the Vibration of Alarm 1. Perform steps 1 to 6 in Setting Alarm on page 73. 2. Press to select Alarm Tone, then press
. 3. Press
. 4. Press to select Vibration, then press to select Enable, Disable or or or Link to Sound, then press
. To Change the Duration of Alarm 1. Perform steps 1 to 10 in Setting Alarm on page 73. 2. Press
. 3. Press
. or to select Alarm Tone, then press or to select Duration, then press The current duration is displayed. 4. Enter the length of the duration in 2 digits (02 to 59 seconds) using the digit keys, then press
. Organiser 74 Changing Alarm Settings 1. Perform steps 1 to 5 in Setting Alarm on page 73. 2. Select the number you wish to change by pressing or
, then press 3. Change Alarm settings. For details on changing Alarm settings, see To Change the Type of Alarm Tone on page 74. Disabling Alarm Function 1. Perform steps 1 and 2 in Changing Alarm Settings. 2. Press
. 3. Press or to select Alarm Status, then press or to select Off, then press
. disappears from the screen. Resetting an Alarm Setting 1. Perform steps 1 to 5 in Setting Alarm on page 73. 2. Select the number you wish to reset by pressing or
, then press
. 3. Press
. 4. Press or to select Reset Alarm, then press or to select Yes, then press
. 75 Organiser
. or or to select Yes, then press to select Clear All, then press Resetting All Alarm Settings 1. Perform steps 1 to 4 in Setting Alarm on page 73. 2. Press
. 3. Press Voice Memo (M 5-4) This allows you to record a voice message of up to 10 seconds, which can be used to remind you of schedule entries or be sent within an MMS. The recorded voice memo is registered in the Sound Gallery. Recording a Voice Memo 1. Press 2. Press 3. Press
. 4. Press to display the Main Menu. or or to select Organiser, then press
. to select Voice Memo, then press to start recording. To stop recording before the recording time is over, press
[Stop]. 5. Select Save to save the voice memo, then press
. If you wish to exit the voice memo, press then select Yes.
[Exit], Tip You can also record a voice memo by pressing and instead of steps 1 to 3. If you wish to record a voice memo again, select Record Again in step 5. The screen will return to step 4. To Play Back the Saved Voice Memo 1. Perform steps 1 to 4 in Recording a Voice Memo to select Playback, then press
. on page 75. or
. 2. Press 3. Press Help List (M 5-5) You can view the help list and use it to guide you in the phones functions. 1. Press 2. Press 3. Press
. to display the Main Menu. or or to select Organiser, then press to select Help List, then press
. The help list is displayed. 4. Check the key operation by pressing 5. When you have finished, press
[Back]. and
. The recorded voice memo is played back. To stop playback, press
[Stop]. Organiser 76 Call Manager Call Log The phone will record the last 10 missed calls, received calls and dialled numbers. Viewing Call Log 1. Press 2. Press
. 3. Press
. 4. Press to display the Main Menu. or to select Call Register, then press to select Missed Calls, Received to select Call Manager, then press or or Calls or Dialled Numbers, then press The selected call log list is displayed. 5. Select the number you wish to view by pressing or
. 6. Press
[View]. Call record 1 is the most recent. When you press displayed. If you wish to dial the number, press
, call record 2 will be
. 7. When you have finished, press
[Back] to return Tip You can also confirm call records by pressing in stand-by mode. You can switch between histories by pressing in step 5 only when you enter by or in stand-by mode. Sending Messages 1. Perform steps 1 to 5 in Viewing Call Log. 2. Select the file name you wish to send by pressing
. or 3. Press press 4. Press press
, then press or
. or
. to select Send Message, then to select MMS or SMS, then 5. Enter your message. For details on creating a message, see Creating a New MMS on page 106 or Creating a New SMS on page 114. Deleting Call Log Deleting Single Call Record 1. Perform steps 1 to 5 in Viewing Call Log. 2. Press 3. Press to select Delete, then press
. or
. to step 4. 77 Call Manager 4. Press or to select Yes, then press
. The selected call record will be deleted. To cancel deletion, select No in step 4, then press
. To Delete All Call Log (M 6-2-4) 1. Perform steps 1 to 3 in Viewing Call Log on page 77. 2. Press
. or to select Clear Logs, then press 3. Select All Calls, then press 4. Press or to select Yes, then press
. All call log records will be deleted. To cancel deleting, select No in step 4, then press
. Tip If you select Missed Calls, Received Calls or Dialled Numbers in step 3, the call log in the selected category will be deleted. to display the Main Menu. or Call Timers (M 6-2-5) This function lets you check the duration of your calls. Checking the Duration of the Last Call 1. Press 2. Press
. 3. Press
. 4. Press
. to select Call Manager, then press to select Call Timers, then press to select Call Register, then press or or 5. Select Last Call, then press
. The duration of the last call is now displayed. 6. When you have finished, press
[Back] to return to call timers menu. Checking the Total Call Time 1. Press to select All Calls, then press in step 5 in Checking the Duration of the Last Call. or 2. When you have finished, press
[Back]. Call Manager 78 Setting the Charge Rate Set the charge rate to calculate the call cost and set the maximum limit for call cost. 1. Perform steps 1 to 4 in Checking the Cost of the Last Call. 2. Press
. 3. Press
. or to select Cost Units, then press or to select Set Units, then press 4. Enter your PIN2 code, then press 5. Enter a cost per unit, then press To enter a decimal point, press
. 6. Enter a currency unit (up to 3 characters), then press
. Call Costs (M 6-2-6) This function lets you check the charges for your calls. Charging Advice is not supported on all networks. Please check with your service provider for availability. Checking the Cost of the Last Call 1. Press 2. Press
. 3. Press
. 4. Press
. to display the Main Menu. or to select Call Manager, then press to select Call Register, then press to select Call Costs, then press or or 5. Select Last Call, then press
. The cost of the last call is now displayed. 6. When you have finished, press
[Back] to return to call timers menu. Checking the Total Call Cost 1. Press or to select All Calls, then press in step 5 in Checking the Cost of the Last Call. 2. When you have finished, press
[Back]. 79 Call Manager Checking the Charge Rate 1. Select Read Units, then press Setting the Charge Rate on page 79. The charge rate is now displayed. at step 3 in
[Back]. 2. When you have finished, press Setting the Charge Limit This function is useful if you wish to make sure you do not exceed a certain charge limit. 1. Perform steps 1 to 4 in Checking the Cost of the Last Call on page 79. 2. Press
. 3. Press
. or to select Max Cost, then press or to select Set Limit, then press 4. Enter your PIN2 code, then press 5. Enter a value, then press
. To enter a decimal point, press
. Checking the Charge Limit 1. Select Read Limit, then press at step 3 in Setting the Charge Limit. The value of the charge limit is now displayed. 2. When you have finished, press to select Call Manager, then press to display the Main Menu. or Resetting All Call Timers and Call Costs 1. Press 2. Press
. 3. Press
. 4. Press or or to select Call Timers or Call to select Call Register, then press 5. Press or to select Clear Timers or Clear Costs, then press Costs, then press
. 6. Press or to select Yes, then press
. To cancel resetting, select No, then press
. 7. Enter your PIN2 code, then press
. The Call Timers and Costs are reset to zero. Checking the Residual Credit 1. Perform steps 1 to 4 in Checking the Cost of the Last Call on page 79. 2. Press press or
. to select Residual Credit, then 3. When you have finished, press
[Back].
[Back]. Call Manager 80 to select Call Manager, then press to display the Main Menu. or Data Counter (M 6-2-7) You can confirm the amount of bytes which you used in the GPRS transmission. 1. Press 2. Press
. 3. Press
. 4. Press
. 5. Press to select Call Register, then press to select Last Data or All Data, to select Data Counter, then press or then press You can now check the amount of bytes. or or
[Back]. 6. When you have finished, press Resetting All Data Counter 1. Perform steps 1 to 4 in Data Counter. 2. Press
. 3. Press to select Yes, then press or or to select Clear Counter, then press
. Diverts (M 6-3) This service is used to divert incoming calls to your voice mail system or to another number depending on certain conditions in which you cannot answer a call. Divert Calls 1. Press 2. Press to display the Main Menu. or to select Call Manager, then press
. 3. Press
. or to select Diverts, then press 4. Select one of the divert options by pressing
, then press
. or The divert options available are:
All Calls:
When Busy:
No Answer:
Diverts all voice calls without ringing. Diverts incoming calls when you are on a call. Diverts incoming calls if you do not answer a call within a certain period of time. The Data Counter is reset to zero. To cancel resetting, select No at step 3, then press
. Not Reachable: Diverts incoming calls when your phone is out of network service or switched off. 81 Call Manager
. 5. Select On, then press 6. If you wish to divert calls to a number which is located in the Phonebook, search for the desired Phonebook entry. Press by name or press order, then press Phonebook entries, see Finding a Name and Number on page 28. or to search in alphabetical
. For details on searching the
[Search] to search the number or 7. If you wish to divert calls to a number which you can enter manually, enter the phone number. 8. Press If you select No Answer in step 4:
9. Enter the period of time using the digit keys (05 to 30 seconds), then press
. Note When a divert is set to All Calls, on the stand-by screen. appears Tip If you select By Service in step 5, you can select the divert option further in the selected option in step 4. Checking the Divert Status 1. Perform steps 1 to 3 in Divert Calls on page 81. 2. Select the divert option you wish to check by pressing or
, then press
. 3. Press or to select Status, then press
. You can now check the status of the selected divert option.
[Back]. 4. When you have finished, press Cancelling All Divert Settings 1. Perform steps 1 to 3 in Divert Calls on page 81. 2. Press to select Cancel All, then press
. 3. Press to select Yes, then press or or
. To cancel the resetting, select No in step 3, then press 4. Press
[OK]. All divert settings are cancelled. Call Manager 82 To cancel the Divert Settings Individually 1. Perform steps 1 to 3 in Divert Calls on page 81. 2. Select the divert option you wish to cancel by pressing or
, then press
. 3. Press 4. Press to select Off, then press or
[OK]. The selected divert has been cancelled. 83 Call Manager Settings Phone Settings Changing the Language (M 7-1-1) You can change the display language that the phone uses for the display messages and text entry. 1. Press 2. Press 3. Select Phone Settings, then press 4. Select Language, then press
. 5. Press press to display the Main Menu. or to select Settings, then press or
. to select the desired language, then
. Wall Paper for the Stand-by Screen (M 7-1-2) For the stand-by screen, an animation and 3 illustrations are provided. Pictures taken with the digital camera or images downloaded from a WAP site can be used for Wall Papers. To Set Built-in Animations or Illustrations 1. Perform steps 1 to 3 in Changing the Language. 2. Press to select Wallpaper, then press
. 3. Press to select On, then press 4. Select Animation or Illustration 1 to or or
. Illustration 3 by pressing or
, then press
. 5. Press again to set. The selected animation or illustration is displayed on the stand-by screen. Note Even if an animation is selected, the stand-by screen displays a static picture/image when you do not operate the phone for about 30 seconds (It is different according to the selected data). Tip To cancel the Wallpaper setting, select Off in step 5. Settings 84 To Set Original Pictures for the Stand-by Screen 1. Perform steps 1 to 3 in To Set Built-in Animations or Illustrations on page 84. To Turn On/Off the Backlight 1. Perform steps 1 to 3 in Changing the Language on page 84. or to select Backlight, then press 2. Press
. 3. Press to select On/Off, then press 4. Select On to set backlight on or Off to set
, then press backlight off by pressing or or
. When you select On in step 4:
5. Enter the duration of the backlight using 2 digits, then press
. To Turn On/Off the Backlight whilst Charging with the Cigarette Lighter Charger 1. Perform steps 1 and 2 in To Turn On/Off the Backlight. or 2. Press to select In Car, then press 3. Select On to set backlight on or Off to set
, then press backlight off by pressing or
. 2. Press
. or to select Original, then press The file names of the pictures/images that are registered in the Saved Pictures is displayed. or 3. Select the picture/image by pressing
, then press The selected picture/image is displayed. 4. Specify the range for displaying the picture/image
, by pressing The selected picture/image is displayed on the stand-by screen.
, then press or
. Note Some pictures/images cannot be used because of their picture/image and data types. Backlight (M 7-1-3) You can turn the backlight of the main screen display on or off when you press the keypad or the optional cigarette lighter charger is connected to the phone. You can change or specify the amount of time the backlight is ON for, which will help conserve battery life. 85 Settings 2. Press
. 3. Press Adjust the Brightness of the Backlight
(M 7-1-4) You can adjust the brightness of the backlight of the main screen display at four levels. 1. Perform steps 1 to 3 in Changing the Language on page 84. or to select Brightness, then press
(Light) or
(Dark) to adjust the brightness for maximum clarity. 4. Press Note The brightness of the backlight does not affect the brightness of the Sub-Screen. Display Saving (M 7-1-5) This phones screen will automatically turn off after a given amount of time if the phone is left open. This is in order to conserve battery life. You can change the time the Display Saving will go into effect works between 2 and 20 minutes or disable this function. Tip When you purchase this phone, the Display Saving is set to work 10 minutes later. 1. Perform steps 1 to 3 in Changing the Language on page 84. 2. Press press or
. to select Display Saving, then 3. Select On to set the Display Saving function on or
, then press Off to set it off by pressing or
. When you select On in step 3:
4. Enter the time until the Display Saving works in two digits (02 to 20 minutes) using the digit keys, then press
. Note The Display Saving does not work whilst you are calling, using WAP. To Cancel the Display Saving Function The display saving continues until either a key is pressed or there is an incoming alert. The first key press will only cancel the display saver. You must press another key in order to input any numerical or text value. Settings 86 Setting the Greeting Message (M 7-1-6) You can set the message which will appear when the phone is turned on. 1. Perform steps 1 to 3 in Changing the Language on page 84. to select Greeting Message, then 2. Press press 3. Press 4. Enter the message, then press or
. or
. to select On, then press
. Up to 16 characters can be stored as a message. For details on entering characters, see Entering Characters on page 24. Tip To cancel the Greeting Message setting, select Off in step 3. Assign Images (M 7-1-7) Pictures/images can be displayed when turning the power on or off, when receiving an incoming call, or when operating the alarm. Pictures taken by a digital camera or images downloaded from a WAP site can be used. To Set Built-in Pictures/Images 1. Perform steps 1 to 3 in Changing the Language on page 84. 87 Settings 2. Press press or
. to select Assign Images, then 3. Select the screen to set the picture/image by pressing or
, then press
. 4. Select Animation 1 or Animation 2 by pressing or
, then press
. or Select Illustration 1 or Illustration 2 by pressing when you select Alarm
, then press or in step 3. The selected picture/image is displayed. 5. Press Tip To cancel the picture/image setting, select Off in step 4. To Set Image Gallery Perform steps 1 to 3 in To Set Built-in Pictures/
Images. 2. Press
. or to select Original, then press The file name of the pictures/images that are registered in the Saved Pictures is displayed. 3. Select the picture/image by pressing or
, then press The selected picture/image is displayed. 4. Specify the range for displaying the picture/image by pressing
, or
, then press
. Note Some pictures/images cannot be used because of their picture/image and data types. External Display (M7-1-8) You can change the settings of the Sub-Screen Display. To Turn On/Off the Sub-Screen Display You can turn the Sub-Screen Display on or off when the phone is closed. 1. Perform steps 1 to 3 in Changing the Language on page 84. 2. Press or then press to select External Display,
. 3. Press
. or to select LCD On/Off, then press 4. Select On to set Sub-Screen Display on or Off to set Sub-Screen Display off by pressing or
, then press
. To Turn On/Off the Backlight of the Sub-Screen Display You can turn the backlight of the Sub-Screen Display on or off when the phone is closed. You can also change or specify the duration of the Sub-
Screen Display backlight. 1. Perform steps 1 to 3 in Changing the Language on page 84. 2. Press or then press to select External Display,
. 3. Press
. or to select Backlight, then press 4. Select On to set backlight on or Off to set
, then press backlight off by pressing or
. When you select On in step 4:
5. Enter the duration of the backlight using 2 digits, then press
. To Adjust the LCD Contrast of the Sub-Screen You may sometimes need to adjust the LCD contrast of the Sub-Screen to suit certain lighting conditions. 1. Perform steps 1 to 3 in Changing the Language on page 84. Settings 88 2. Press then press 3. Press or or then press to select External Display, to select LCD Contrast,
. 4. Press
(Dark) or
(Light) to adjust the contrast for maximum clarity. LCD contrast can be adjusted in 9 levels. 5. Press Phone Setting Reset (M 7-1-9) The phone settings can be reset to their default settings. 1. Perform steps 1 to 3 in Changing the Language on page 84. 2. Press press or
. to select Set to Default, then 3. Enter your handset code, then press 4. Press to select Yes, then press or
. To cancel resetting, select No in step 4, then press
. All phone settings are reset. Note If you enter a wrong handset code in step 3, operation is cancelled. 89 Settings Call Settings Set various types of functions and services. Call Waiting (M 7-2-1) If you wish to be able to receive another incoming call whilst you have a call in progress, you must activate the Call Waiting service. 1. Press 2. Press 3. Press
. to display the Main Menu. or or to select Settings, then press
. to select Call Settings, then press
. 4. Select Call Waiting, then press 5. Select On to activate the Call Waiting service or
, then Off to deactivate it by pressing press 6. Press Note Call Waiting service may not be available on all
[OK]. or mobile phone networks. Contact your network operator for more information. To Check the Call Waiting Service Status 1. Perform steps 1 to 4 in Call Waiting on page 89. 2. Press
. Now you can check the status of the Call Waiting service. to select Status, then press or
[Back]. 3. Press Display Call Timers (M 7-2-2) 1. Perform steps 1 to 3 in Call Waiting on page 89. 2. Press to select Display Call Timers, or then press
. 3. Select On or Off by pressing press
. or
, then Caller No. Status (M 7-2-3) This lets you control whether to show your phone number or callers phone number when calling another party. Caller No. Status is not supported on all networks. Please check with your service provider for availability. 1. Perform steps 1 to 3 in Call Waiting on page 89. 2. Press to select Caller No. Status, then press or
. The options available are:
Show Callers No.: Select if you wish to see the Show your No.:
phone number from any callers before you answer. Select if you wish to show your phone number. Show Called No.: Select if you wish to see the phone number of the phone you are connected to, even if your call is diverted to another phone number. Select if you wish to hide your phone number from any callers. Hide if Called:
4. Select On to activate the option you wish to set or
, then Off to deactivate it by pressing press or
. 3. Select the option you wish to set by pressing
, then press
. or Settings 90 Personal Call (M 7-2-4) A specified ringing tone or vibrator setting can be associated to a pre-registered phone number. Up to 20 phone numbers can be registered. 1. Perform steps 1 to 3 in Call Waiting on page 89. 2. Press to select Personal Call, then press
. or 3. Select the number you wish to set by pressing
, then press
. or 4. Enter the phone number, then press
. or
[Search] to search the number If you wish to select the phone number in the Phonebook, search for the desired Phonebook entry. Press by name or press order, then press Phonebook entries, see Finding a Name and Number on page 28. or to search in alphabetical
. For details on searching the 5. Press press or
. to select Assign Melody, then 6. Select a ringing tone. For details on selecting a ringing tone, see Ringer Type on page 64. 91 Settings 7. Press
. 8. Press or to select Vibration, then press or to select Enable, Disable or Link to Sound, then press For details on setting the vibrator, see Vibration on page 65. 9. When setting is complete, select Setup End, then press
. Group Call (M 7-2-5) Phone numbers can be registered or updated in groups. To Set Group Ringing Tone Different ringing tones can be set for each group. When you purchase this phone, groups are set to off. If you do not set a group ringing tone the default ringing tone will be used. 1. Perform steps 1 to 3 in Call Waiting on page 89. 2. Press to select Group Call, then press
. or 3. Select the group you want to set by pressing
. or 4. Press 5. Press press
, then press or or
. to select On, then press to select Assign Melody, then
. 7. Press
. 8. Press 6. Select a ringing tone. For details on selecting a ringing tone, see Ringer Type on page 64. or to select Vibration, then press or to select Enable, Disable or Link to Sound, then press For details on setting the vibration, see Vibration on page 65. 9. When setting is complete, select Setup End, then press
. Tip To cancel the ringing tone setting, select Off in step 4. Auto Redial (M 7-2-6) See Automatic Redialling on page 20 about this function. Minute Minder (M 7-2-7) Minute Minder function informs you of your talk time by sounding a tone after every minute. 1. Perform steps 1 to 3 in Call Waiting on page 89. 2. Press to select Minute Minder, then press or
. 3. Press
. or to select On or Off, then press Call Setting Reset (M 7-2-8) The call settings can be reset to their default settings. 1. Perform steps 1 to 3 in Call Waiting on page 89. 2. Press press to select Set to Default, then or
. 3. Enter your handset code, then press 4. Press to select Yes, then press or
. To cancel resetting, select No at step 4, then press
. All call settings are reset. Note If you enter the wrong handset code in step 3, the operation is cancelled and the screen returns to step 3 in Call Waiting on page 89. Settings 92 Network Settings Selecting a Network Automatically (M 7-3-1) Each time the power is turned on, your phone will always try to connect first to the most recently available network, then to the subscribed network, and lastly to the preferred network. If none of these are found, it will then search for any other available GSM networks. 1. Press 2. Press 3. Press press to display the Main Menu. or or
. to select Settings, then press
. to select Network Settings, then 4. Select Select Network, then press 5. Select Automatic, then press
. To Set the Network Manually 1. As in step 5 in Selecting a Network
. Automatically, press Manual, then press or
. to select 2. Select the network from the list by pressing
, then press
. 93 Settings to select Add New Network, then
. Adding a New Network 1. Perform steps 1 to 4 in Selecting a Network Automatically. or
. or to select Add, then press 2. Press press 3. Press 4. Enter the country code. 5. Press 6. Enter the network code. 7. Press 8. Enter a new network name. 9. Press Editing the Preferred List To Change the Position of a Network in the Preferred List 1. Perform steps 1 to 4 in Selecting a Network
. Automatically. or 2. Press
. or to select Set Preferred, then press 3. Select the name of the network to change the position from the list by pressing press
. or
, then 4. Press or then press to select Insert or Add to End,
. To Delete a Network from the Preferred List 1. Perform steps 1 to 3 in To Change the Position of a Network in the Preferred List on page 93. or 2. Press to select Delete, then press Changing the Network Password (M 7-3-2) 1. Perform steps 1 to 3 in Selecting a Network Automatically on page 93. 2. Press press or
. to select Change Password, then 3. Enter the old password, then press 4. Enter a new password, then press
. 5. Enter a new password again, then press
. If you enter the incorrect password in step 5, the screen will return to step 4 and you will be asked to enter the password again. 6. Press
. Internet Settings (M 7-4) WAP/MMS Settings WAP Settings and MMS Settings can perform following various setups, respectively. WAP Settings Item Description Operation Profile Name*
WAP Profile Name (Unique Name) IP Address*
IP address Homepage Homepage Port Number* Security Option
. Select Profile Name and press Enter the strings you like and press Select IP Address and press Enter IP address for WAP and press Select Homepage and press Enter Homepage URL, if needed, and press
. Select Port Number and press Enter Port Number (1024-
65535) and press
. Settings 94 Item Description Operation Item Description Operation Circuit Prompt Circuit Prompt Connection Type Bearer Con-
nection Type
. Select Circuit Prompt and press Select Enable or Dis-
able and press Select Connection Type and press Select GPRS Then CSD, GPRS or CSD and press
. GPRS Settings (If GPRS then CSD or GPRS will be selected as connection type, they should be set)
. APN*
Access Point Name UserName User Name Select APN and press
. Enter Access Point Name and press Select UserName and press Enter User Name and press
. 95 Settings Password Password Linger Time Linger Time Select Password and press Enter Password and press
. Select Linger Time and press Enter second time (0-
99999) and press
. CSD Settings (If GPRS then CSD or CSD will be selected as connection type, they should be set) Phone No.* Access Point Number Line Type ISDN or Ana-
logue UserName User Name
. Select Phone No. and press Enter Access Point Num-
ber and press Select Line Type and press Select ISDN or Analogue and press Select UserName and press Enter User Name and press
. Item Description Operation Item Description Operation Password Password Linger Time Linger Time Select Password and press Enter Password and press
. Select Linger Time and press Enter second time (0-
99999) and press
*: Item to be set as mandatory. MMS Settings Item Description Operation Relay Server URL*
MMS Relay Server Port Number* Security Option Connection Type Bearer Con-
nection Type
. Select Relay Server URL and press Enter URL of the Relay Server and press
. Select Port Number and press Enter Port Number (1024-
65535) and press Select Connection Type and press Select GPRS Then CSD, GPRS or CSD and press
. Profile Name*
MMS Profile Name (Unique Name) IP Address*
IP address
. Select Profile Name and press Enter the strings you like and press Select IP Address and press Enter IP address for MMS and press
. GPRS Settings (If GPRS then CSD or GPRS will be selected as connection type, they should be set)
. APN*
Access Point Name Select APN and press
. Enter Access Point Name and press
. Settings 96 Item Description Operation Item Description Operation UserName User Name Password Password Linger Time Linger Time Select UserName and press Enter User Name and press
. Select Password and press Enter Password and press
. Select Linger Time and press Enter second time (0-
99999) and press
. UserName User Name Password Password Linger Time Linger Time Select UserName and press Enter User Name and press
. Select Password and press Enter Password and press
. Select Linger Time and press Enter second time (0-
99999) and press
. CSD Settings (If GPRS then CSD or CSD will be selected as connection type, they should be set)
*: Item to be set as mandatory. Select Phone No. and press Enter Access Point Num-
ber and press Select Line Type and press Select ISDN or Analogue and press
. Phone No.* Access Point Number Line Type ISDN or Ana-
logue 97 Settings To Set up your Account Information This information should be supplied by your Internet service provider. 1. Press 2. Press 3. Press press 4. Press to display the Main Menu. or or
. or to select Settings, then press to select Internet Settings, then to select WAP Settings or MMS
. Settings, then press
. 5. Select the profile name you wish to edit by pressing
, then press or or 6. Press to select Edit, then press 7. Select the item you wish to edit, then press 8. Edit each item. 9. When you have finished editing, select Setup
. End, then press
. Infrared (M 7-5) You can use the built-in infrared modem to establish contact between your phone and a PC equipped with an infrared port. 1. Press 2. Press 3. Press 4. Press to display the Main Menu. or or or to select Settings, then press to select Infrared, then press
. to select On, then press
. will appear on the screen. The infrared setting will return to off when no data is transmitted/received via infrared communication. To Select Network Connection Profile 1. Perform steps 1 to 4 in To Set up your Account Information. 2. Select the profile name to use by pressing
, then press
. or 3. Press or to select Activate, then press
. Settings 98 Security (M 7-6) Enabling/Disabling the PIN Code (M 7-6-1) If the PIN code is enabled you will be asked in enter the PIN code each time the phone is switched on. Your PIN code is stored on the SIM and you should have been made aware of the code when you purchased the SIM. Contact your service provider for further details. 1. Press 2. Press 3. Press 4. Select PIN Entry, then press 5. Press
. to display the Main Menu. or or to select Settings, then press to select Security, then press to select On or Off, then press or
. 6. Enter your PIN code, then press Note If you enter the wrong PIN code three times in step 6, the SIM will lock. To remove the lock, contact your service provider/SIM vendor. 99 Settings Changing PIN Code This allows you to change the PIN code stored on the SIM. 1. Perform steps 1 to 3 in Enabling/Disabling the PIN or to select PIN Entry, then press or to select Change PIN, then press code. 2. Press
. 3. Press
. 4. Enter the existing PIN code, then press 5. Enter a new PIN code, then press
. 6. Enter a new PIN code again, then press
. If you enter a code different from the code which you entered in step 6, the screen returns to step 5. Enter the correct code again. Handset Lock (M 7-6-2) The Handset Lock is an additional security feature which prevents unauthorised use of the phone or certain features. The default Handset Lock code is 0000. 1. Perform steps 1 to 3 in Enabling/Disabling the PIN code. 2. Press press to select Handset Lock, then or
. 3. Press
. or to select On or Off, then press 4. Enter your handset code, then press
. If you enter an incorrect handset code, the screen will clear and you will be prompted to enter the code again. Changing Handset Code The default handset code is 0000. 1. Perform steps 1 and 4 in Handset Lock on page 99. 2. Press
. or to select Change Code, then press 3. Enter the old handset code, then press 4. Enter a new handset code, then press
. 5. Enter a new handset code again, then press
. If you enter a code different from the code which you entered in step 5, the screen returns to step 4. Enter the correct code again. Changing PIN2 Code (M 7-6-3) PIN2 code is used to protect certain functions in the phone such as Fixed Dialled Number and call cost limits. The following shows you how to change PIN2 code. 1. Perform steps 1 to 3 in Enabling/Disabling the PIN code on page 99. 2. Press
. or to select Change PIN2, then press 3. Enter the existing PIN2 code, then press 4. Enter a new PIN2 code, then press
. 5. Enter a new PIN2 code again, then press
. If you enter a code different from the code which you entered in step 5, the screen returns to step 4. Enter the correct code. Call Barring (M 7-6-4) This function lets you place restrictions on incoming and outgoing calls. To activate Call Barring you will need the call barring password, which will be available from your service provider. 1. Perform steps 1 to 3 in Enabling/Disabling the PIN code on page 99. 2. Press
. 3. Press press or to select Call Barring, then press to select call barring option, then or
. Settings 100 The call barring functions available are:
Bar Foreign Calls: Restricts all outgoing international calls. Only Local & Home: Restricts all outgoing international calls except to your home country. Bar Incoming Calls: Restricts all incoming calls. Restricts all incoming calls Bar Inc. if Abroad:
when you are outside of the coverage from your registered network operator. Bar Outgoing Calls: Restricts all outgoing calls except emergency calls. 4. Select one of the call barring options by pressing or
, then press
. The call barring options available are:
All Services:
Voice Calls:
Data:
Fax:
Messages:
All except msgs.:
Restricts all services. Restricts all voice calls. Restricts all data calls. Restricts all fax calls. Restricts all messages. Restricts all services except messages. 5. Select On, then press
. 101 Settings If you select Off, the selected call barring setting is cancelled. 6. Enter the network password, then press
. To change the network password, see Changing the Network Password on page 94. 7. Press
[OK]. The selected call barring function is activated. If you enter a wrong network password, the entered password is cleared. Enter the correct the password. Checking Call Barring Status 1. Perform steps 1 to 6 in Call Barring on page 100. 2. Press
. Now you can check the status of the selected call barring option. to select Status, then press or 3. When you finish the confirmation, press
[Back]. Cancel All Call Barring Settings 1. Perform steps 1 to 4 in Call Barring on page 100. 2. Press to select Cancel All, then press
. or 3. Enter the network password, then press 4. Press
[OK]. All call barring settings are cancelled. To Cancel the Call Barring Setting Individually 1. Perform steps 1 to 5 in Call Barring on page 100. 2. Select the call barring option you wish to cancel by pressing or
, then press
. or 3. Press 4. Enter the Barring password, then press to select Off, then press
. The selected call barring setting is cancelled. Fixed Dialling No. (M 7-6-5) When the Fixed Dialling No. is enabled, you can call to only predefined numbers. Enabling Fixed Dialling No. 1. Perform steps 1 to 3 in Enabling/Disabling the PIN code on page 99. 2. Press press or
. to select Fixed Dialling No., then 3. Enter a PIN2 code, then press 4. Select Settings, then press 5. Select On, then press
. If you select Off, Fixed Dialling No. is disabled. Adding a New Name 1. Perform steps 1 to 3 in Enabling/Disabling the PIN code on page 99. 2. Press
. 3. Press 4. Press press or to select Edit Dial List, then press
. or
. to select Add New Name, then 5. Add a name and a phone number. For details on adding a name and a phone number, see Storing Names and Numbers on page 26. Searching a Registered Name 1. Perform steps 1 to 3 in Adding a New Name. 2. Press to select Search, then press 3. Search for the desired name. or For details on searching a name, see Finding a Name and Number on page 28. Settings 102 Master Reset (M 7-7) The settings can be reset to their default settings. 1. Press 2. Press 3. Press
. to display the Main Menu. or or to select Settings, then press
. to select Master Reset, then press 4. Enter your handset code, then press 5. Press to select Yes, then press or
. To cancel resetting, select No at step 5, then press
. All settings are reset. Note If you enter a wrong handset code in step 4, operation is cancelled. Editing a Registered Name 1. Perform steps 1 and 2 in Adding a New Name on page 102. 2. Select a name you wish to edit, then press 3. Press to select Edit, then press 4. Edit the selected name. or For details on editting a name, see Editing Phonebook Entries on page 28. Deleting a Registered Name 1. Perform steps 1 and 2 in Adding a New Name on page 102. 2. Select a name you wish to delete, then press 3. Press to select Delete, then press 4. Select Yes, then press or
. The selected name will be deleted. To cancel deletion, select No at step 4, then press
. 103 Settings Browser Your phone contains a WAP browser used for surfing on the Mobile Internet, where you can get a lot of useful information. Normally, pages are designed for a mobile phone. Your phone is already setup to Your carrier's site for WAP/
MMS Settings. Viewing the WAP Browser (M 8-1) 1. Press 2. Select the menu you wish to view by pressing
] during stand-by.
, then press
. or To Exit the WAP Browser 1. Press to exit the browser. Navigating a WAP Page
Move the highlights around in the screen.
: Used to select an action displayed in the lower left corner of the screen. Used to select an action displayed in the lower right corner of the screen.
(press and hold):
Used to start the Go to URL. to
(press and hold):
Used to start the Bookmark (WAP). Exit (short press) Turn off the phone. (press and hold) Launch browser option menu. Browser 104 Browser Menu When you have started browsing, you can reach browsing options by pressing
. Reload:
Settings:
Refresh the contents of the WAP page. Includes Restart Browser, some settings, etc. The Browser Menu contains the following:
Back:
Home:
Go to the previous screen. Go to the homepage you set in the WAP Settings. Bookmarks: Add the site you are currently browsing to your list of bookmarks, or see the list of bookmarks. Go to URL: Input the URL of the site you wish to go, and go to the site. Show URL: Display the URL you are currently browsing. SnapShots: Save the page you are currently browsing to your list of Snap Shots, or see the list of Snap Shots. Save Items: Save images or sounds to the Image Gallery or Sound Gallery. Alert Inbox: See the list of WAP push messages. You can receive push messages via WAP Services. This means that a service provider sends WAP content to your phone, without you having to do anything. 105 Browser Messages Your phone allows you to send and receive short messages, MMS and WAP mails. MMS (Multimedia Messaging Service) About MMS MMS allows you to further personalise your messages with pictures, sounds and animations. Note Some MMS functions may not always be available depending on your network. Contact your network operator for more information.
Setting up MMS (M 0-1-5) 1. Press 2. Select MMS, then press 3. Press 4. Select the desired item to set, then press
] during stand-by. or
. to select Settings, then press
. The items available are:
Download Msg. "Intl. Download Msg."
Delivery Report Delivery Rep. Allow Expiry Time Sender Visibility Anonymous Reject Slide Interval 5. Edit the each item. 6. When you finish setting, press Creating a New MMS (M 0-1-1) 1. Press 2. Select MMS, then press 3. Select Compose, then press 4. Enter your message, then press 5. Enter phone number or E-mail address of the
] during stand-by.
[Back].
. recipient, then press If you wish to select the phone number or E-mail address in the Phonebook, search for the desired Phonebook entry. Press by name or press
[Search] to search the number to search in alphabetical or or Messages 106 4. Select a desired number from the list by pressing or
, then press
. 5. Enter the phone number or E-mail address of the other recipients, then press
. 6. Press
[Back] twice. To Use the Text Template 1. Perform steps 1 to 3 in Creating a New MMS on page 106. 2. Press 3. Press press
[Options] to display the Options Menu. or to select Insert Template, then
. 4. Select the desired template from the list by pressing or
, then press
. order, then press Phonebook entries, see Finding a Name and Number on page 28. For details on searching the 6. Select Send, then press
. The confirmation screen of file size is displayed. 7. Select Yes, then press
. After the message has been sent, the message is added to the Sent box. To Enter the Subject of the Message 1. Perform steps 1 to 3 in Creating a New MMS on page 106.
[Options] to display the Options Menu. 2. Press 3. Select Subject, then press 4. Enter the subject of your message, then press To Add Recipients 1. Perform steps 1 to 5 in Creating a New MMS on
. page 106. 2. Press
. or to select Add address, then press 3. Select To to add recipients or Cc to send a copy or of this MMS to other recipients by pressing
, then press
. 107 Messages To Save a Message in the Drafts Box You can save a message in the Drafts box temporarily and send it later, without sending it immediately. 1. Perform steps 1 to 5 in Creating a New MMS on page 106. 2. Press or to select Save, then press to save the message in the Drafts box. Note You can send it later following the instructions in Sending a Message in the Drafts Box. Inserting Attached Data You can send pictures/images and sounds saved in the Saved Pictures or Saved Sounds attached to MMS. You can attach a maximum of 6 pictures/images or sounds in all. 1. Perform steps 1 to 3 in Creating a New MMS on page 106. 2. Press 3. Press press
[Options] to display the Options Menu. or
. to select Picture or Sound, then 4. Select the file name you wish to attach by pressing or
, then press
. When a picture/image is selected, it is displayed. When a sound is selected, it is played. 5. Once you have confirmed the picture/image, press
. To Delete Attached Data 1. Perform steps 1 to 3 in Inserting Attached Data. The list of attached data is displayed.
[Options]. or or 2. Press 3. Press 4. Press Sending a Message in the Drafts Box 1. Perform steps 1 and 2 in Creating a New MMS on to select Remove, then press to select Yes, then press
. page 106. 2. Press
. 3. Select the desired message to send in the Drafts box to select Drafts, then press or by pressing The Options Menu is display. or
, then press
[Options]. 4. Press or
. The confirmation screen of file size is displayed. to select Send, then press 5. Select Yes, then press
. The phone begins the sending process and the MMS is sent. Messages 108 Reading MMS (M 0-1-2) Messages you receive are stored in the Inbox, and outgoing messages are stored in the Drafts box until you send them, after which they move to the Sent box. Incoming Messages The MMS indicator (
receiving an incoming message. 1. Perform steps 1 and 2 in Creating a New MMS on
) will appear when you are page 106. 2. Press or Messages are marked with attachments. or
. 3. Press press The message is displayed. to select Inbox, then press
. denote mails with to select the desired message, then 4. Scroll the screen by pressing or to read the message. 5. When you finish viewing, press
[Done]. To Check the Sender and Receiver Phone Number or E-mail Address 1. Perform steps 1 to 3 in Incoming Messages. 2. Press
[Options] to display the Options Menu. 109 Messages 3. Press or to select Details, then press
. The senders phone number or E-mail address, time and date stamp, subject, attachment and size are displayed. Replying to a Message to the Sender from Inbox 1. Perform steps 1 and 2 in Creating a New MMS on page 106. 2. Press 3. Press 4. Press 5. Enter your message. to select Inbox, then press or
[Options] to display the Options Menu. or
. to select Reply, then press For details on entering characters, see Entering Characters on page 24. 6. Press 7. Press
. The phone number or E-mail address of the recipient is automatically filled in the senders phone number or E-mail address. The subject field is automatically filled in with the original subject preceded by Re:. 8. Select Send, then press
. The confirmation screen of file size is displayed. 9. Select Yes, then press
. Tip You can reply to a message to all addresses of selected messages by selecting Reply All in step 5. Forwarding a Message 1. Perform steps 1 to 3 in Replying to a Message to the Sender from Inbox on page 109. 2. Press 3. Press to select Forward, then press or and enter the phone number or E-mail
. address of the recipient. 4. If you wish to select the phone number or E-mail address in the Phonebook, search for the desired Phonebook entry. Press by name or press order, then press Phonebook entries, see Finding a Name and Number on page 28. or to search in alphabetical
. For details on searching the
[Search] to search the number or 5. Press
. The original message is displayed in the Message field. Subject field is automatically filled in with the original subject preceded by Fw:. The original message and subject cannot be changed. 6. Select Send, then press
. The confirmation screen of the file size is displayed. 7. Select Yes, then press Note When the message with attached data is forwarded the data is also sent. However, if there is any material which the phone recognises as having copyright, it will not be sent. Modifying a Message 1. Perform steps 1 to 3 in Replying to a Message to the Sender from Inbox on page 109. 2. Select Edit, then press 3. Modify the message. 4. Press 5. Select Send, then press
. The confirmation screen of the file size is displayed. 6. Select Yes, then press Note Messages cannot be edited if they contain particular data such as SMIL, XHTML, copyrights or unknown format. Storing the Mail Address of a Sender in the Phonebook 1. Perform steps 1 to 3 in Replying to a Message to the Sender from Inbox on page 109. Messages 110 2. Press press The name entry screen is displayed. or
. to select Save to Phonebook, then 3. Enter the name for the Phonebook entry. For details on entering a name, see Storing Names and Numbers on page 26. Retrieving MMS When is in the Inbox, the following can be done. 1. Perform steps 1 and 2 in Creating a New MMS on page 106. 2. Press 3. Press or or to select Inbox, then press to select a desired alert to
. download. 4. Press 5. Press
. to display the Alert Menu. or to select Download, then press 111 Messages 4. Press press 5. Press or
. or Deleting Messages 1. Perform steps 1 and 2 in Creating a New MMS on page 106. 2. Press or to select Inbox, Drafts or Sent, then press
. 3. Select the message you wish to delete by pressing or
, then press
[Options]. The Options Menu is displayed. to select Delete Message, then to select One Message or All Message, then press
. 6. Select Yes, then press
. To cancel deletion, select No, then press
. Note You cannot delete locked messages. To Lock Messages 1. Perform steps 1 and 2 in Deleting Messages. 2. Select the message you wish to lock by pressing
, then press or
[Options]. The Options Menu is displayed. or to select Lock/Unlock, then press 3. Press
] during stand-by.
Creating Slide Data 1. Press 2. Select MMS, then press 3. Select Compose, then press 4. Press The Options Menu is displayed.
[Options] to display the Options Menu. or to select Slide Show, then press 5. Press
. 6. Press 7. Enter your message, then press 8. Enter the phone number or E-mail address of the to select On, then press or
. recipient, then press If you wish to select the phone number or E-mail address in the Phonebook, search for the desired Phonebook entry. Press by name or press order, then press For details on searching the Phonebook entries, see Finding a Name and Number on page 28.
[Search] to search the number to search in alphabetical or
. or 9. Press press or
. to select Send or Save, then If you wish to send pictures/images and sounds, see Inserting Attached Data on page 108. Note You can create messages which have up to 3 slides. Each slide can contain one picture/image, one sound file and up to 512 characters of text (up to the message total 30kb limit). The slide options available are:
To add a new slide. To delete the active slide. Add Slide:
Delete Slide:
Previous Slide: To navigate to the previous slide. Next Slide:
To navigate to the next slide. EVA data cannot be attached as a slide data to a message. Making a Call to the Sender of a Message You can make a call to the sender of a message in Inbox whose address (From) is the phone number. 1. Perform steps 1 and 2 in Replying to a Message to the Sender from Inbox on page 109. 2. Press 3. Press
[Options] to display the Options Menu. or
. to select Call, then press Messages 112 SMS (Short Message Service) About SMS The Short Message Service (SMS) allows you to send text messages of up to 1024 characters to other GSM users. Using SMS with Your Phone Messages longer than 160 characters may be composed. During sending, the messages will be split. If the receiver has a suitable phone the messages will recombine during reception, if not your message will appear as a number of separate 160 characters messages. You can send or receive SMS even if you are talking on the phone. You can also use Text Templates to help you compose SMS. Setting up SMS Before you can use SMS to send and receive messages, you have to set up some personal and system information. To set up the Service Centre Address (M 0-2-4) 1. Press
] during stand-by to display the
Message menu. 2. Press or to select SMS, then press
. 113 Messages to select Settings, then press or 3. Press 4. Select Message Centre, then press 5. Enter the centre number. If you wish to enter a country code for a message to an international number, press and hold until a + sign appears. 6. Press Validity Period This indicates the number of days and hours for which a message you send may remain undelivered to the message recipient. During this period, the message service centre will continually try to deliver the message to the recipient. 1. Perform steps 1 to 3 in Setting up SMS. 2. Press press to select Message Lifetime, then or
. or
, 3. Select the validity period by pressing then press
. Message Format 1. Perform steps 1 to 3 in Setting up SMS. 2. Press press or
. to select Message Format, then 3. Select the message format by pressing or
, then press
. Connection Type 1. Perform steps 1 to 3 in Setting up SMS on page 113. 2. Press press to select Connection Type, then or
. 3. Select the connection type by pressing then press
. or
, Creating a New SMS (M 0-2-1) 1. Press 2. Press 3. Select Compose, then press 4. Enter your message.
or
] during stand-by. to select SMS, then press
. For details on entering characters, see Entering Characters on page 24. 5. Press To Use the Text Template 1. Perform steps 1 to 3 in Creating a New SMS. 2. Press 3. Press press
[Options] to display the Options Menu. or to select Insert Template, then
. 4. Select the desired template from the list by pressing or
, then press
. To Save the Message in the Outbox 1. Perform steps 1 to 5 in Creating a New SMS. 2. Enter the SMS phone number of the recipient, then
. or to select Save, then press press 3. Press Sending a Message 1. Perform steps 1 to 5 in Creating a New SMS. 2. Enter the SMS phone number of the recipient, then
. press
. or 3. If you wish to select the SMS phone number in the Phonebook, search for the desired Phonebook entry. Press by name or press order, then press Phonebook entries, see Finding a Name and Number on page 28. or to search in alphabetical
. For details on searching the
[Search] to search the number 4. Press or to select Send, then press
. The phone begins the sending process and the SMS is sent. Messages 114
) will appear when an incoming Reading SMS Incoming Messages The SMS indicator (
message arrives. 1. When you receive a SMS, press 2. Press or
. to select the desired message. The senders phone number and a part of the message are displayed. When the senders phone number is stored in the Phonebook, the senders name is displayed instead of the phone number. Messages are marked with denote unread messages. 3. Press 4. Scroll the screen by pressing or to read the message. 5. When you have finished viewing, press Replying to the Sender 1. Perform steps 1 to 3 in Reading SMS. 2. Press 3. Press 4. Enter your message.
[Options] to display the Options Menu. or
. to select Reply, then press For details on entering characters, see Entering Characters on page 24. 115 Messages 5. Press
. Follow the procedure from step 2 in Sending a Message on page 114. Calling the Message Sender 1. Perform steps 1 to 3 Reading SMS. 2. Press 3. Press
[Options] to display the Options Menu. or to select Call Sender, then press Forwarding a Message 1. Perform steps 1 to 3 in Reading SMS. 2. Press 3. Press
. 4. Enter the SMS phone number of the recipient, then
[Options] to display the Options Menu. or to select Forward, then press
. press For details on searching the Phonebook entries, see Finding a Name and Number on page 28. to select Send, then press or
. The phone begins the sending process and the SMS is sent. 5. Press Storing the Phone Number of a Sender in the Phonebook 1. Perform steps 1 and 2 in Reading SMS on page 115. 2. Press 3. Press press
[Options] to display the Options Menu. or
. to select Save to Phonebook, then 4. Enter the name for the phonebook entry. For details on entering a name, see Storing Names and Numbers on page 26. Check the already entered phone number. Modifying a Message 1. Perform steps 1 and 2 in Creating a New SMS on page 114. 2. Press
. 3. Select the desired message to modify in the Outbox to select Outbox, then press or by pressing or
, then press
[Options] to display the Options Menu. 4. Press 5. Select Edit, then press 6. Modify the message, then press
. Follow the procedure from step 2 in Sending a Message on page 114. Deleting Messages 1. Perform steps 1 and 2 in Creating a New SMS on page 114. 2. Press press or
. to select Inbox or Outbox, then 3. Select the message you wish to delete by pressing or 4. Press 5. Press 6. Press
, then press
[Options] to display the Options Menu. or or to select Delete, then press to select Yes, then press
. The selected message is deleted. Messages 116
] during stand-by. to select Cell Broadcast, then Subscribing to Cell Broadcasts Select the page of the cell broadcast message that you want. 1. Press 2. Press press 3. Press 4. Press press 5. Press press 6. Press 7. Enter the appropriate channel code obtained from your service provider, and a title for the channel.
or
. or or
. or
. to add the channel. to select Settings, then press
. to select Set Info Subjects, then to select Create Subject, then Setting Languages Allows you to select your preferred language for the cell broadcast message display. Cell Broadcast (M 0-3) You can receive Cell Broadcast messages or general messages like weather reports, traffic reports, etc. broadcast to all subscribers in a certain network area. This function may not be available on all mobile phone networks. Contact your network operator for more information. Enabling/Disabling Cell Broadcast (M 0-3-1) 1. Press 2. Press press 3. Press
. 4. Select On to set Cell Broadcast on or Off to set to select Cell Broadcast, then to select On/Off, then press
] during stand-by.
or
. or it off by pressing or
, then press
. Reading Cell Broadcast Messages (M 0-3-2) 1. When you receive a Cell Broadcast message, press
. 2. Scroll the screen by pressing message. or to read the 3. When you finish viewing, press
. 117 Messages Cell Information (M 0-4) The Cell Information is the message information that operators sent to subscribers in certain areas. When you receive Cell Information, the message will be displayed on the stand-by screen. Note This function may not be available on all mobile phone networks. Contact your network operator for more information.
or Enabling/Disabling Cell Information 1. Press
] during stand-by. 2. Press
. 3. Press
. or to select Cell Info, then press to select On or Off, then press Note If Cell Information is set to On, the Stand-by Time will decrease. Messages 118 Data Transmission Your PC can be set up to use the GS-200 as a modem. You can either use Infrared (IrDA) or a data cable XN-
1DC10 (option) to connect to the PC. Refer to XN-1DC10 attached manual for the connection method of a data cable. System Requirements OS:
Windows98*, WindowsMe, Windows2000, WindowsXP
* Windows98 Second Edition, or Windows98 +
Internet Explorer 5.01 or later Interface: Infrared (IrDA) or Serial port (D-sub 9-pin connector) CD-ROM drive Software Installation and Setup 1. Install Modem setup software from the included CD-ROM. Insert the CD-ROM and double-click [setup.exe]
to start installation. Follow the instructions on the screen to complete installation. When installation has completed, SHARP GSM GPRS icon appears in the control panel. 119 Data Transmission When you perform the following operations (step 2 to 4), refer to GSM/GPRS Modem Option Help after executing [SHARP GSM GPRS] in the control panel. 2. Install Modem driver. 3. Make the Dial-up connection. 4. Set GSM/GPRS Modem Option which is stored in the control panel. If you wish to use GSM, fill the GSM connection column. If you wish to use GPRS, fill the GPRS connection column. Note Modem setup software may not run on certain PCs. Using the Modem Setup The software in the CD-ROM supplied is provided based on the END USER LICENSE AGREEMENT, and can be used and duplicated only in compliance with the conditions of the pertinent END USER LICENSE AGREEMENT. The software installer displays the END USER LICENSE AGREEMENT upon startup. When using the infrared modem function for executing data transmission, align the infrared port with each other. Note The distance between the infrared ports which can communicate is a maximum of 20 cm within a 30 angle. When transmitting data via infrared communication, you need to set the infrared setting to On. (p. 98) It is not recommended that you make or answer a call during data transmission. The operation may be interrupted. Data Transmission 120 Troubleshooting Problem Solution The phone does not turn on. Make sure the battery is properly inserted and charged. PIN code or PIN2 code is rejected. Make sure you have entered the correct code (4 to 8 digits). Your SIM card/protected functions will become locked after 3 unsuccessful attempts. Contact your SIM provider if you do not have the correct PIN code. Enter PUK code (8 digits) provided by your service provider (if supported). If the attempt is successful, enter the new PIN code and confirm your phone is operational again. Otherwise contact your dealer. Adjust the LCD contrast. SIM card becomes locked. The display is diffi-
cult to read. 121 Troubleshooting Problem Solution Phone functions do not work after the phone is turned on. Calls cannot be made or received. Check the radio signal strength indicator as you may be outside the service area. Check to see if any error message is displayed when you turn your phone on. If so, contact your dealer. Make sure the SIM card is correctly inserted. If the message SIM Card Error is displayed at start-up, you cannot use your SIM card or SIM card is damaged. Contact your dealer or network service provider. Check your call barring, fixed dialling setting, remaining battery and call forwarding settings. Check if your phone is currently performing data communication using Infrared
(IrDA) or a data cable. Check the remaining balance if you are using a pre-paid SIM card. Problem Limited memory available. Solution Delete any unnecessary data. Problem Solution Call quality is poor. Cannot access net-
work service. Cannot send or receive SMS. Cannot connect to MMS service pro-
vider. Your current location may not provide good call quality (i.e., in a car or train). Move to a location where radio signal strength is greater. Check where your account has been registered and where the service is available. Make sure you are correctly subscribed for the Short Message Service, that the network supports this service, and that the centre number is set up correctly. If not, contact your network service provider. MMS settings and configuration may be missing or incorrect or network does not support it. Check your service providers access point number. Contact your service provider to confirm the correct settings. Troubleshooting 122 Quick Reference GS-200 Function Key shortcuts To display the Main Menu. To mute and unmute the microphone during call. To turn Silent mode on.
[Mute]
Special Features To adjust earpiece volume. Press and
, or Side keys. Compose Inbox Sent Drafts Settings Messages Press [ ] during stand-by. Press or to scroll. Press . MMS SMS Cell Broadcast On/Off Read Messages Settings Cell Info Compose Inbox Outbox Settings On Off Individual Call Timer To display:
Resettable Call Timer Cumulative Call Timer Select "Last Call"
Select "Clear Timers"
Select "All Calls"
Voicemail Get Voicemail Voicemail setting E N G L S H I Navigating Menus Press to display the Main Menu. Scroll up Scroll down Basic Operation On/Off Make a call Answer a call End a call Press and hold . Enter number, press . Press . Press . Phonebook Storing name and number 1.Press , select "Add New Name". 2.Enter name, press . 3.Enter number, press . 4.Select number type, press . Camera Taking Pictures 1.Press and hold for approximately 2 seconds. 2.Press or the Side keys to take picture. MMS 1.Press [ ]. 2.Select "MMS", press . 3.Select "Compose", press . 4.Enter your message, press . 5.Enter phone number or E-mail address, press . 6.Select "Send", press . Quick Reference GS-200 Press during stand-by mode. Press or to scroll and press to access function. Camera My Phone Fun & Games Profiles Organiser 1 Image Gallery 2 Sound Gallery 3 Text Templates 4 Memory Status 1 Games 2 Melody Editor 3 Tone Editor 1 Normal 2 Meeting 3 Activity 4 Car 5 Silent 1 Calculator 2 Calendar 3 Clock & Alarm 4 Voice Memo 5 Help List Messages Info-Service
(Depends on the contents of SIM card.) 1 MMS 2 SMS 3 Cell Broadcast 4 Cell Info 5 Voicemail Browser 1 Home page 2 Bookmark Settings Call Manager 1 Phonebook 2 Call Register 3 Diverts 1 Phone Settings 2 Call Settings 3 Network Settings 4 Internet Settings 5 Infrared 6 Security 7 Master Reset Quick Reference GS-200
1 | User Manual 2 of 2 | Users Manual | 1003.18 KiB |
Safety Information and Usage Guidelines Exposure to Radio Frequency Signals Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. In August, 1996, the Federal Communications Commissions
(FCC) adopted RF exposure guidelines with safety levels for hand-held wireless phones. Those guidelines are consistent with the safety standards previously set by both U.S. and international standards bodies:
ANSI C95.1 (1992)"
NCRP Report 86 (1986) ICNIRP (1996) Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. For example, over 120 scientists, engineers, and physicians from universities, government health agencies, and industry reviewed the available body of research to develop the ANSI Standard (C95.1). The design of your phone complies with the FCC guidelines (and those standards).
* American National Standards Institute; National Council on Radiation Protection and Measurements; International Commission on Non-
Ionizing Radiation Protection 123 Safety Information and Usage Guidelines Antenna Care Unauthorized antennas, modifications, or attachments could damage the phone and may violate FCC regulations, Phone Operation NORMAL POSITION: Hold the phone as you would any other telephone. TIPS ON EFFICIENT OPERATION: For your phone to operate most efficiently:
Do not touch the antenna unnecessarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. Driving Check the laws and regulations on the use of wireless telephones in the areas where you drive. Always obey them. Also, if using your phone while driving, please:
Give full attention to driving driving safely is your first responsibility;
Use hands-free operation, if available;
e Pull off the road and park before making or answering a call if driving conditions so require. Electronic Devices Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Pacemakers The Health Industry Manufacturers Association recommends that a minimum separation of six (6) inches (15.24 centimeters) be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by Posted Facilities and recommendations of Wireless Technology Research, Turn your phone OFF in any facility where posted notices so require. Persons with pacemakers:
Should ALWAYS keep the phone more than six inches from Aircraft their pacemaker when the phone is turned ON; FCC regulations prohibit using your phone while in the air. Should not carry the phone in a breast pocket;
Should use the ear opposite the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, turn your phone OFF immediately. Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. 124 Safety Information and Usage Guidelines Switch OFF your phone before boarding an aircraft. Blasting Areas To avoid interfering with blasting operations, turn your phone OFF when in a blasting area or in areas posted: Turn off two-
way radio. Obey all signs and instructions. Potentially explosive atmospheres Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include fueling areas such as gasoline stations; below deck on boats; fuel or chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust, or metal powders; and any other area where you would normally be advised to turn off your vehicle engine. For Vehicles Equipped with an Air Bag An air bag inflates with great force. DO NOT place objects, including both installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-
vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. | :
FCC Declaration of Conformity tri-mode phone: GS-200 with PC/Data interface cable XN-1DC10U This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation. Responsible Party:
SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430 TEL: 1-800-BE-SHARP Tested To Comply With FCC Standards FOR HOME OR OFFICE USE FC FCC Notice The phone may cause TV or radio interference if used in close proximity to receiving equipment. The FCC can require you to stop using the phone if such interference cannot be eliminated. Information To User This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: |
1. Reorient/Relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. |
125 Safety Information and Usage Guidelines 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the users authority to operate the equipment. Batteries Caution: All batteries can cause property damage, injury or burns if a conductive material, such as jewelry, keys or beaded chains, touches exposed terminals. The material may complete an electrical circuit and become quite hot. To protect against such unwanted current drain, exercise care in handling any charged battery, particularly when placing it inside your pocket, purse or other container with metal objects. When the battery is detached from the phone, use a cover made of non-conductive poly bag, for storing your battery, when it is not in use. Flying You should turn off your phone before boarding any aircraft. To prevent possible interference with aircraft systems, U.S. Federal Aviation Administration (FAA) regulations require you to have permission from a crew member to use your phone while the plane is on the ground. To prevent any risk of interference, FCC regulations prohibit using your phone while the plane is in the air. Limiting Childrens Access to Your Phone Your phone should not be played with by children. They could hurt themselves and others, damage the phone or make calls that increase your bill. Changes or Modifications Any changes or modifications to your phone not expressly approved in this document could void your warranty for this equipment and void your authority to operate this equipment. Only use approved batteries, antennas and chargers. The use of unauthorized accessories may be dangerous and will invalidate the phone warranty if said accessories cause damage to ora defect to develop in the phone. Although your phone is quite sturdy, it is a complex piece of hardware and can be broken. Use common-sense guidelines to avoid dropping, hitting, bending or sitting on it. Liquefied Petroleum Gas Vehicles using liquefied petroleum gas (such as propane or butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire Protection Association, One Batterymarch Park, Quincy, MA 02269, Attn.: Publication Sales Division. Phone Care Your phone is designed for excellent durability under normal use conditions. Protect your phone from water damage that could result from spills or excessive exposure to rain. Never submerge your wireless phone. Cleaning the Phone Cleaning of this product should only be done with a damp cloth. The use of chemical! cleaners may harm the finish and integrity of the radio housing and is not recommended. NOTE Some of the network services explained in this operation manual may not be available on your network. Please contact your network operator or network service provider. 126 Safety Information and Usage Guidelines Drivers Safety Tips Your wireless telephone gives you the powerful ability to communicate by voice ---
almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold. When you drive a car, driving is your first responsibllity. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips:
4. Get to know your wireless phone and its features such as speed dial and redial. |f available, these features help you to place your call without taking your attention off the road. 2. When available, use a hands-free device. If possible, add an additional layer of convenience and safety to your wireless phone with one of the many hands-free accessories available today. 3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you get an incoming call at an inconvenient time, if possible, let your voicemail answer it for you. 4, Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous. 5. Do not take notes or look up phone numbers while driving. Jotting down a "to do" list or flipping through your address book takes attention away from your primary responsibility, driving safety. 6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. 7. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road. 8. Use your wireless phone to call for help. Dial 911 or other local emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone!
9, Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 911 or other local emergency number, as you would want others to do for you. 40. Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-
emergency wireless number.
"The wireless industry reminds you to use your phone safely when driving. "
Provided by the Cellular Telecommunications Industry Association FDA Consumer Update The U.S. Food and Drag Administration's Center for Device and Radiological Health Consumer Update on Mobile Phones FDA has been receiving inquiries about the safety of mobile phones, including cellular phones and PCS phones. The following summarizes what is known --- and what reminds unknown --
- about whether these products can pose a hazard to health, and what can be done to minimize any potential risk. This information may be used to respond to questions. Why the concern?
Mobile phones emit low levels of radiofrequency energy (i.e., radiofrequency radiation) in the microwave range while being used, They also emit very low levels of radiofrequency energy
(RF), considers non-significant, when in ihe stand-by mode. It is well known that high levels of RF can produce biological damage through heating effects (this is how your microwave oven is able to cook food). However, it is not known whether, to what extent, or through what mechanism, lower levels of RF might cause adverse health effects as well, Although some research has been done to address these questions, no clear picture of the biological effects of this type of radiation has emerged to date. Thus, the available science does not allow us to conclude that mobile phones are absolutely safe, or that they are unsafe. However, the available scientific evidence does not demonstrate any adverse health effects associated with the use of mobile phones. What kinds of phones are in question ?
Questions have been raised about hand-held mobile phones, the kind that have a built-in antenna hat is positioned close to the user's head during normal telephone conversation, These types of mobile phones are of concern because of the short distance between the phone's antenna --- the primary source of the RF --- and the person's head. The exposure to RF from mobile phones in which the antenna is located at greater distances from the user (on the outside of a car, for example) is drastically lower than that from hand-held phones, because a person's RF exposure decreases rapidly with distance from the source. The safety of so-called "cordless phones," which have a base unit connected to the telephone wiring in a house and which operate at far lower power levels and frequencies, has not been questioned. How much evidence is there that hand-held mobile phones might be harmful?
Briefly, there is not enough evidence to know for sure, either way; however, research efforts are on-going. The existing scientific evidence is conflicting and many of the studies that have been done to date have suffered from flaws in their research methods. Animal experiments investigating the effects of RF exposures characteristic of mobile phones have yielded conflicting results, As few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. In one study, mice genetically altered to be predisposed to developing one type of cancer developed more than twice as many such cancers when they were exposed to RF energy compared to controls. There is much uncertainly among scientists about whether results obtained from animal studies apply to the use of mobile phones. First, it is uncertain how to apply the results obtained in rats and mice to humans. Second, many of the studies that showed increased tumor development used animals had had already been treated with cancer-causing chemicals, and other studies exposed the animals to the RF virtually continuously --- up to 22 hours per day. For the past five years in the United States, the mobile phone industry has supported research into the safety of mobile phones. This research has resulted in two findings in particular that merit additional study:
1. Ina hospital-based, case-control study, researchers looked for an association between mobile phone use and either glioma (a type of brain cancer) or acoustic neuroma (a benign tumor of the nerve sheath). No statistically significant association was found between mobile phone use and acoustic nouroma. There was also no association between mobile phone use and gliomas when all types of gliomas were considered together. It should be noted that the average length of mobile phone exposure in this study was less than three years. When 20 types of glioma were considered separately, however, an association was found between mobile phone use and one rare type of gliomas, neuroepitheliomatous tumors. It is possible with multiple comparisons of the same sample that this association occurred by chance. Moreover, the risk did not increase with how often the mobile phone was used, or the length of the calls. In fact, the risk actually decreased with cumulative hours of mobile phone use. Most cancer causing agents increase risk with increased exposure. An ongoing study of brain cancers by the National Cancer Institute is expected 1o bear on the accuracy and repeatability of these results. |
9. Researchers conducted a large battery of laboratory tests to assess the exposure to mobile phone RF on genetic material. These included tests for several kinds of abnormalities, including mutations, chromosomal aberrations, DNA strand breaks, and structural changes in the genetic material of blood cells called lymphocytes. None of the tests showed any 127 FDA Consumer Update effect of the RF except for the micronucleus assay, which detects structural effects on the penetic material. The cells in this assay showed changes afler exposure to simulated cell _ phone radiation, but only afier 24 hours of exposure. It is possible that exposing the test cells {0 radiation for this long resulted in heating, Since this assay is known to be sensitive to heating, heat alone could have caused the abnormalities to occur. The data already in the literature on the response of the micronucleus assay to RF are conflicting. Thus, follow-up research is necessary. 2 FDA is currently working with government, industry, and academic groups to ensure the proper follow-up to these industry-funded research findings, Collaboration with the Cellular Telecommunications Industry Association (CTIA) in particular is expected to lead io FDA providing research recommendations and scientific oversight of new CTIA-funded research based on such recommendations. Two other studies of interest have been reported recenily in the literature:
1, Two groups of 18 people were exposed to simulated mobile phone signals under laboratory conditions while they performed cognitive function tests. There were no changes in the subject's ability to recall words, numbers, or pictures, or in their spatial memory, but they were able to make choices more quickly in one visual test when they were exposed to simulated mobile phone signals. This was the only changes noted among more than 20 variables compared. 3 2. Ina study of 209 brain tumor cases and 425 matched controls, there was no increased risk of brain tumors associated with mobile phone use. When tumors did exist in certain locations, however, they were more likely to be on the side of the head where the mobile phone was used. Because this occurred on only a small number of cases, the increased likelihood was too small to be statistically significant. 4 rn 1, Muscat et al. Epidemiological Study of Cellular Telephone Use and Malignant Brain Tumors, In: State of the Science Symposium; 1999 June 20; Long Beach, California. 2. Tice et al. Tests of mobile phone signals for activity in genotoxicity and other laboratory assays. In:
Annual Meeting of the Environment Mutagen Society; March 29, 1999, Washington, D.C.; and personal communication, unpublished results, 3. Preece, AW, Iwi, G, Davies-Smith, A, Wesnes, K, Butler, S, Lim, E, and Varey, A. Effect ofa 915-MIIz simulated mobile phone signa! on cognitive function in man. Int. J. Radiat. Biot., April 8, 1999. 4. Wardell, L, Nasman, A, Pahlson, A, Hallquist, A and Mild, KII, Use of cellular telephones and the risk for brain tumors: a case-control study, Int. J, Oncol., 15: 113-116, 1999 In summary,, we do not have enough information at this point to assure the public that there are, or are not, any low incident health problems associated with use of mobile phones. FDA continues to work with all parties, including other federal agencies and industry, to assure that research is undertaken to provide the necessary answers to the outstanding questions about the safety of mobile phones. What is known about cases of human cancer that have been reported in users of hand-held mobile phones?
Some people who have used mobile phones have been diagnosed with brain cancer. But it is important to understand that this type of cancer also occurs among people who have not used mobile phones. In fact, brain cancer occurs in the U.S. population at a rate of about 6 new cases per 100,000 people each year, At that rate, assuming 80 million uses of mobile phones (a
-number increasing at a rate of about | million per month), about 4800 cases of brain cancer would be expected each year among those 80 million people, whether or not they used their phones. Thus it is not possible to tell whether any individual's cancer arose because of the phone, or whether it would have happened anyway. A key question is whether the risk of getting a particular form of cancer is greater among people who use mobile phones than among the rest of the population. One way to answer that question is to compare the usage of mobile phones among people with brain cancer with the use of mobile phones among appropriately people without brain cancer. This is called a case-control study. The current case-control study of brain cancers by the National Cancer Institute, as well as the follow-up research to be sponsored by industry, will begin to generate this type of information. What is FDA's role concerning the safety of mobile phones?
Under the law, FDA does not review the safety of radiation-emitting consumer products such as mobile phones before marketing, as if it does with new drugs or medical devices, However, the agency has authority to take action if mobile phones are shown to emit radiation at a level
{hat is hazardous to the user, In such a case, FDA could require the manufacturers of mobile phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists, Although the existing scientific data do not justify FDA regulatory actions at this time, FDA has urges the mobile phone industry to take a number of steps to assure public safety, The agency has recommended that the industry:
lM support needed research into possible biological effects of RF of the type emitted by mobile phones;
Ml design mobile phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and
@ cooperate in providing mobile phone users with the best possible information on what is known about possible effects of mobile phone use on human health, At the same time, FDA belongs to an interagency working of the federal agencies that have responsibility for different aspects of mobile phone safety to ensure a coordinated effort at the federal level. These agencies are:
Mi National Institute for Occupational Safety and Health
@ Environmental Protection Agency M@ Federal Communications Commission
@ National Telecommunications and Information Administration The National Institutes of Health also participates in this group. In the absence of conclusive information about any possible risk, what can concerned individuals do?
If there is a risk from these products --- and at this point we do not know that there is --- it is probably very small. But if people are concerned about avoiding even potential risks, there are simple steps they can take to do so. For example, time is a key factor in how much exposure a person receives, Those persons who spend long periods of time on their hand-held mobile phones could consider holding lengthy conversations on conventional phones and serving the hand-held models for shorter conversations or for situations when other types of phones are not available. People who must conduct extended conversations in their cars every day could switch to a type of mobile phone that places more distance between their bodies and the source of the RF, since the exposure level drops off dramatically with distance. For example, they could switch to:
M@ a mobile phone in which the antenna is located outside the vehicle, Ma hand-held phone with a built-in antenna connected to a different antenna mounted on the outside of the car or built into a separate package, or Mi a headset with a remote antenna to a mobile phone carried at the waist. Again, the scientific data do not demonstrate that mobile phones are harmful. But if people are concerned about the radiofrequency energy from these products, taking the simple precautions outlined above can reduce any possible risk. Where can | find additional information?
For additional information, see the following websites:
Federal Communications Commission (FCC) RF Safety Program (select "Information on Human Exposure to RF Fields from Cellular and PCS Radio Transmitters"): http://
www.fcc.govt/rfsafety/
World Health Organization (WHO) International Commission on Non-lonizing Radiation Protection (select Qs & As): http://www.who.int/emf United Kingdom, National Radiological Protection Board: htip://wwwnrpb.org.uk Cellular Telecommunications Industry Association (CTIA): hitp:/Avww.wow-
com.com U.S. Food and Drug Administration (FDA) Center for Devices and Radiological Health:
hltp:www.fda.gov/cdrh/consumer/
128 FDA Consumer Update Exposure to Radio Waves THIS MODEL PHONE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 0.931 W/kg and when worn on the body, as described in this user guide, is 0.251 W/kg. Body-worn Operation ; This device was tested for typical body-
worn operations with the back of the phone kept 1.5 cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1.5cm separation distance between the user's body and the back of the phone. The use of belt-clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fecid after searching on FCC ID APYHROO0027. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com.
* In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. 129 Exposure to Radio Waves
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2003-01-17 | 1850.2 ~ 1909.8 | PCE - PCS Licensed Transmitter held to ear | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2003-01-17
|
||||
1 | Applicant's complete, legal business name |
Sharp Corporation
|
||||
1 | FCC Registration Number (FRN) |
0005810866
|
||||
1 | Physical Address |
1 Takumi-cho, Sakai-ku, Sakai City
|
||||
1 |
Osaka, N/A 590-8522
|
|||||
1 |
Japan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
m******@ccsemc.com
|
||||
1 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
APY
|
||||
1 | Equipment Product Code |
HRO00027
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
M**** N********
|
||||
1 | Title |
Deputy General Manager, Head of Q&E promotion Unit
|
||||
1 | Telephone Number |
+81-5********
|
||||
1 |
n******@sharp.co.jp
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | PCE - PCS Licensed Transmitter held to ear | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | GSM/GPRS Cellular Phone Transceiver | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power is EIRP. This device contains 900 MHz and 1800 MHz GSM functions that are not operational in U.S. Territories. This filing is only applicable for 1900 MHz PCS operations. SAR compliance for body-worn operating configurations is limited to the specific configuration tested for this filing. This device was tested with a 1.5 cm device-to-body spacing gap and was not tested with any body-worn accessories made by Sharp or any other manufacturer. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device, including its antenna whether extended or retracted, and the user body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are - Head: 0.931 W/kg; Body-worn: 0.251 W/kg. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Japan Quality Assurance Org.
|
||||
1 | Name |
K**** N******
|
||||
1 | Telephone Number |
81-72********
|
||||
1 | Fax Number |
81-72********
|
||||
1 |
n******@jqa.jp
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 24E | 1850.20000000 | 1909.80000000 | 1.1020000 | 2.5000000000 ppm | 300KGXW |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC