FCC ID: APYTCG0045 Intelligent Remote Controller with Bluetooth

<< TV Introduction FCC ID: APYTCG0045 IC ID: 548D-AVT006 Remote Control Unit

(POWER): Switch the TV power on or enter standby. 1 2 0-9: Set the channel. 3 AD/MPX: Select the sound multiplex mode and audio description. 4 External equipment operational buttons: Operate the external equipment. 5 INFO DTV: Display the programme information.

YouTube: Display the YouTube screen. 6 7 NETFLIX: Display the NETFLIX screen. If you press the NETFLIX button when the TV is turned off, the TV turns on and the NETFLIX screen is displayed.

(Back): Return to the previous screen.

8

9 11 VOL+/-: Set the volume.

, ENTER: Select a desired item on the screen. 12

(Mute): Mute the sound. Mute will be cancelled after 30 minutes. Mute can be cancelled by pressing VOL +/- or

, 13 select the coloured items on the screen.

: The coloured buttons are correspondingly used to

TV Introduction Remote Control Unit (Continue)

14 Buttons for useful operations

(Teletext) Select the teletext mode.

(Subtitle) Switch subtitle languages on/off. 15 EPG DTV: Display the EPG screen. 16 TOOLS: Display the Tools screen.

(Google Assistant): Start a Voice Search. 17 Speak the word that you want to search for into the microphone at the bottom of the remote control. When you are using the microphone, do not cover this part with your hand. 18 19 CH

(SET: Display the SET screen.

: Select the channel.

ENGLISH | FRANAIS | PORTUGUS | | | INDONESIA | | TING VIT | | | O'ZBEK TILIDA FCC statements:

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction. Federal Communication Commission (FCC) Radiation Exposure Statement Power is so low that no RF exposure calculation is needed. IC statements:

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

(1)this device may not cause interference, and

(2)this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme avec Industrie Canada RSS exemptes de licence standard(s). Son fonctionnement est soumis aux deux conditions suivantes:

(1) cet appareil ne peut pas provoquer d'interfrences, et

(2) cet appareil doit accepter toute interfrence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Radiation Exposure Statement The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Dclaration d'exposition aux radiations:

Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada tablies pour un environnement non contrl. Le produit est sr pour un fonctionnement tel que dcrit dans ce manuel. La rduction aux expositions RF peut tre augmente si l'appareil peut tre conserv aussi loin que possible du corps de l'utilisateur ou que le dispositif est rgl sur la puissance de sortie la plus faible si une telle fonction est disponible.

Sharp Corporation To: Federal Communications Commission Date: 2023/04/11 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Certification designating a U.S. Agent for Service of Process Section 2.911(d)(7)

(KDB 986446 D01 Covered Equipment) Sharp Corporation (the applicant) as required by section 2.911(d)(7), designate below contact located in the United States for purposes of acting as the applicants agent for service of process. The applicant also acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Type of Equipment subject to FCC Certification: Intelligent Remote Controller FCC ID: APYTCG0045 Sincerely yours, Applicant/Grantee FRN:0005810866 US Agent FRN: 0003737772 _________________

(Signature) Sharp Corporation Taihei Ohtsuka Division Manager fcc-contact@sharp.co.jp _________________

(Signature) Sharp Electronics Corp. Mr Steve M Petruska Senior Product Safety Engineer spetrusk@sharpsec.com Postal Address: 1 Sharp Plaza (mailstop 13), Mahwah, NJ 7495, United States

Sharp Corporation To: Federal Communications Commission Date: 2023/03/27 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Section 2.911(d)(5)(i) and Section 2.911(d)(5)(ii)

(KDB 986446 D01 Covered Equipment) Section 2.911(d)(5)(i) Sharp Corporation (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Section 2.911(d)(5)(ii) Sharp Corporation (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Type of Equipment subject to FCC Certification: Intelligent Remote Controller FCC ID: APYTCG0045 If you have any questions, please feel free to contact me Contact Person:

Position in the Company: Division Manager Date of Signature:

Taihei Ohtsuka 2023/04/03 ___________________________ Signatory

(signature of the applicant)

Date: 2023-04-27 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern:

The Sharp Corporation the undersigned, hereby authorizes Mrs. Wendy Zhan from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the Sharp Corporation solely in matters relating to the application for an FCC equipment authorization for FCC ID: APYTCG0045 including the signing of documents in connection with this Application. Necessary acts carried out Shenzhen Morlab Communications Technology Co., Ltd. on our behalf of the Sharp Corporation in connection with the Application shall have the same effect as acts of the Sharp Corporation also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thank you for your attention to this matter. Yours Sincerely, Signatory:

Contact name: Taihei Ohtsuka Email: fcc-contact@sharp.co.jp Company name: Sharp Corporation

Date: 2023-04-27 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Request of Confidentiality for FCC ID: APYTCG0045 To Whom it may concern:

requests confidentiality and Pursuant to sections 0.457 and 0.459 of Commissions Rules(CFR 47), and Section 552(b)(4) of the Freedom of Information Act, Sharp Corporation hereby information accompanying trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. this application. The materials contain treatment of certain We are also hereby request Short-Term Confidentiality till date 08/28/2023(max time 180 days from grant date) as outlined in Public Notice DA04-1705. This provision will give Sharp Corporation temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows:

PERMANENT AND SHORT-TERM CONFIDENTIAL LIST PERMANENT SHORT-TERM Exhibit 1 2 3 4 5 6 7 8 Description Block Diagram Operational Description Schematics BOM External Photos Internal Photos Test-Setup Photos User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Signatory:

Name: Taihei Ohtsuka Company name: Sharp Corporation Address: 1 Takumi-cho, Sakai-ku, Sakai City, Osaka, Japan Email: fcc-contact@sharp.co.jp