Introduction Thank you for purchasing xxxx. Be sure to read this manual before and during use to ensure proper operation. The screens and illustrations in this manual are shown as examples. The actual screens and illustrations may differ. Note that xxxx is referred to as Wireless router in this manual.
@ Reproduction of this manual in part or in whole without prior permission is prohibited.
@ The contents of this manual are subject to change without prior notice.
| Basic package
\ - sll a USB cable Quick Start guide Notes on usage
(in Japanese only) (in Japanese only) The following items are not included in the package.
+ AC adapter
+ Purchase a specified charger (sold separately).
(This drawina is not final) 1 Contents/Precautions Precautions (ALWAYS FOLLOW "g THESE DIRECTIONS)
@ Before use, read these Precautions carefully and use your wireless router properly. *2
@ These precautions contain information intended to prevent bodily injury to the user and to surrounding people, as well as damage to property, and must be observed at all times. Serious bodily injury: This refers to loss of eyesight, bodily injury, burns (high- and low-temperature), electric shock, broken bones, injuries with residual aftereffects from poisoning, etc., and injuries requiring hospital admission for treatment or long-term hospital attendance as an outpatient. Minor injury: This refers to bodily injury, burns (high- and low-temperature), electric shock, etc. that do not require hospital admission for treatment or long-term hospital attendance as an outpatient.
& The following symbols indicate the different degrees of injury or damage that may occur if information provided is not observed and the wireless router is used improperly. Z\Danger This symbol indicates that death or serious bodily injury ("') may directly and immediately result from improper use. ei We ee he
*3 Property damage: This refers to extended damage to buildings, furniture, livestock, pets, etc.
@ The following symbols indicate specific directions. Indicates a prohibited action. Q Dont Indicates not to handle the device with wet hands. Indicates that Dh ee S|
Z\Warning TEMS CYTO HIMIVGLeS Lae death or serious bodily injury (1) may result from improper use.
/\Caution This symbol indicates that minor injury ("2) and/or property damage ("?) may result from improper use.
No disassembly Indicates not to disassemble the device. Instruction HI OtiUVlivVilo specified are compulsory
(must be followed). NY) No liquids Indicates not to use the device near water or get it wet. Indicates that the power cord must be unplugged from the outlet. Contents/Precautions Precautions is explained in the following sections.
@ Handling the wireless router, adapters, nano UIM card
@Handling the wireless router. She
@ TFADAIMG: AMAPONS 4.0. F 8 ricctere se o's se all ptelto eleiy! ol gltetelt ste yuilee tld
@ Handling nano UlMcard .............. 00.0002 e eee eee
@ Handling near electronic medical equipment.............
@\MatenialiliSt Sxcaacci ode ccas TGgheade Bees cedaeeeeas
@ Handling the sample (SIM eject tool) Do not sprinkle sand, soil or dirt on the equipment or put the equipment directly on it. Also, do not touch the equipment when sand etc. is adhering to your hand. May cause fires, burns, bodily injury, electric shock, etc. Refer to the following for details on waterproofness/
dustproofness. Ra nat erharna tho aniinmant whilo it ic wat with Handling the wireless router, adapters, nano UIM card
/\Danger YW Dont Se en eee ee Ee Sat ee eee ae ee eae ee ee a er ee ee liquids such as water (drinking water, sweat, seawater, pet urine, etc.). May cause fires, burns, bodily injury, electric shock, etc. Refer to the following for details on waterproofness. Q Don't Do not use, store or leave the equipment in locations subject to high temperatures or accumulation of heat (near a fire or heating unit, in gq kotatey or hedding tinder direct cunliqht inside Don't Do not press the equipment strongly or broken it. Especially when you put and carry it in the pocket, do not let it hit or caught in the object . May cause fires, burns, bodily injury, etc. because of catching fire, exploding, overheating or leaking of the a vehicle on a hot day, etc.). May cause fires, burns, bodily injury, electric shock, etc. Don't Do not place the equipment inside cooking appliances such as microwave ovens and induction cookers or high pressure vessels such as pressure cookers, or near them. May cause fires, burns, bodily injury, electric shock, etc. internal battery.
* Take particular care with the followings Sitting or squatting down while you are putting the equipment in your pocket of trousers or skirt
@ Letting the equipment caught in the door or vehicular door while you are putting the equipment in your pocket of outerwear
@ Stepping on the equipment while it is placing on the soft object such as the sofa or bedding, floor Contents/Precautions Do not attempt to disassemble or modify the equipment. No disassembly \ay cause fires, burns, bodily injury, electric shock, etc. C Do not get the equipment wet with liquids such as Ss water (drinking water, sweat, seawater, pet urine, No liquids ete.), May cause fires, burns, bodily injury, electric shock, etc. Refer to the following for details on waterproofness. Do not allow conductive materials (such as metal objects and pencil lead) to come into contact with Don't the charger terminal or external connection jack or dust to get inside it. May cause fires, burns, bodily injury, electric shock, etc. Do not cover or wrap the equipment with bedding SY) etc. when using or charging. Don't May cause fires, burns, etc. S) No liquids Do not allow liquids such as water (drinking water, sweat, seawater, pet urine, etc.) to get inside the charger terminal or external connection jack. May cause fires, burns, bodily injury, electric shock, etc. Refer to the following for details on waterproofness.
[E& P.26 Waterproof/Dustproof Instruction If charging is not completed after the specified charging time, stop charging. May cause fires, burns, bodily injury, etc. because of overcharging. 0 Instruction Use only optional parts specified by eee. May cause fires, burns, bodily injury, electric shock, etc. Instruction Be sure to turn off the wireless router and not to charge the battery in locations where flammable gas may be generated such as gas stations and where dust is generated. May cause explosions, fires etc. if using the equipment in location where flammable gas etc. Z\Warning OQ Do not subject the equipment to strong force, impacts or vibration such as letting it fall, stepping Don't on it or throwing it. May cause fires, burns, bodily injury, electric shock, etc. Contents/Precautions
Instruction If any trouble such as an unusual odor, unusual noise, smoking, overheating, discoloration or deformation is found during use, charge or storage, follow the instructions below.
@ Unplug the power plug from the outlet or accessory socket.
@ Turn off the wireless router. May cause fires, burns, bodily injury, electric shock, etc. if you do not follow the instructions above. Do not place the equipment where the young children can reach it. Don't A young child may swallow the equipment, or suffer bodily injury, electric shock, etc. Be careful when using the wireless router continuously for a long time or charging because it Instruction may become warm. Also, be careful not to touch it unintentionally for a long time when you fall asleep aie es
/\Caution Dont Do not use a damaged equipment. May cause fires, burns, bodily injury, etc.
Dont Do not leave the equipment on unstable surfaces, such as on a wobbly table or sloped surface. May fall and cause injury etc. Gtvu. The wireless router or adapter may become warm when using an data communication, etc. for a long time or charging. Directly touching a warmed part for a long time may cause redness, itching, rashes, low-temperature burns, etc. on your skin depending on your constitution or health condition. Handling the wireless router JN ess ee Ls Ne
) Do not throw the wireless router into a fire or heat it. May cause fires, burns, bodily injury, etc. Don't because of catching fire, exploding, overheating or leaking of the internal battery. If being used by a child, have a guardian teach him/
her the proper handling procedures and do not Don't have him/her use it improperly. May cause bodily injury etc. 10 Contents/Precautions OQ Do not apply excessive force on the wireless router such as puncturing it with a nail (sharp Don't object), hitting it with a hammer (hard object) or stepping on it. May cause fires, burns, bodily injury, etc. because of catching fire, exploding, overheating or leaking of the internal battery. comes into contact with your eyes or mouth, lnetrintiott 443556 5ttnda i atman tice ch amdanbaa Busan ccdtthln Klea Qe If the substance etc. inside the wireless router
= BARRA ae eee. Pee Be eee Sere Peeks ewe eee water. Then seek prompt medical treatment. May result in loss of eyesight, sick, etc. because of the substance etc. inside the wireless router. Z\Warning Don't Do not point the illuminated light directly at someone's eyes. Especially when you use it for young children, keep sufficient distance from them. fin wxtiiae bdahite Mak omar Renee Bece Bimainhk? macs Instruction Turn off the wireless router or set it to Airplane mode before going aboard an airplane. Since using the wireless router on airplanes is restricted, follow the instructions given by the respective airlines. May interfere with the operation of electronic devices installed on the airplane. If you commit a prohibited act while using the wireless ae ee ee ee ee eee ee ee ee Ce be temporarily affected leading to accidents etc. Dont Do not watch the screen which is flashing repeatedly for a long time. May cause spasm or loss of consciousness. GD Instruction router on an airplane, you may be punished by law. Follow the instructions given by the respective medical facility regarding the use of the wireless router in a hospital. Turn off the wireless router in areas where the use of mobile phones is prohibited. May interfere with the operation of electronic devices and electronic medical equipment. 11 Contents/Precautions oD Instruction Turn off the wireless router near high-precision electronic devices or devices that use weak electronic signals. May interfere with the operation of electronic devices.
* Take particular care with the following devices Hearing aids, implanted cardiac pacemakers, implanted cardioverter-defibrillators, other electronic medical equipment, other equipment controlled by electronic signals, etc. If you use an implanted cardiac pacemaker, implanted cardioverter-defibrillator or other electronic medical equipment, contact the respective manufacturer or dealer to check whether the operation of the equipment is affected by signals. Instruction If the display part, be careful of broken glass and the exposed inside of the wireless router. May cause burns, bodily injury, electric shock, etc. if you touch the broken or exposed parts. If you are using electronic medical equipment etc., If the internal battery leaks or emits an unusual Sys contact the respective manufacturer or dealer to Instruction check whether the operation of the equipment is affected by signals. May interfere with the operation of electronic medical equipment etc. SP o900Fr, immediatety stop using the wireiess router Instruction and move it away from any naked flames or fire. The battery fluid is flammable and could ignite, causing a fire, explosion, etc. a Do not allow a pet etc. to bite the wireless router. May cause fires, burns, bodily injury, etc. Instruction because of catching fire, exploding, overheating or leaking of the internal battery. 12 Contents/Precautions
/\Caution RQ If the display is broken and the internal substance atc then leaks do not aet it on vour skin (face. Don't If the substance etc. inside the internal battery leaks, do not get the liquid on your skin (face, hands, etc.). May result in damage to your eyes, skin, etc. If the internal substance etc. comes into contact with your eyes, mouth, skin or clothes, immediately rinse the contacted area with clean water. Also, if it comes into contact with your eyes or mouth, seek medical treatment immediately after rinsing the contacted Don't ee i Sow oe ml/h LY OY Ee hands, etc.), clothes, etc. May result in damage to your eyes, skin, etc. If the internal substance etc. comes into contact with your eyes, mouth, skin or clothes, immediately rinse the contacted area with clean water. Also, if it comes into contact with your eyes or mouth, seek medical treatment immediately after rinsing the contacted area. area. Instruction When removing the nano UIM card, be careful with the tip of the SIM eject tool or paper clip not to injure any part of your body such as fingers. May cause bodily injury etc. if you touch the tip of the SIM eject tool or paper clip. Dnnt Do not dispose of the wireless router in ordinary garbage. May cause fires, burns, bodily injury, etc. 65 Instruction If you use the wireless router in a vehicle, contact the vehicle manufacturer or dealer to check whether the operation of the vehicle is affected by MEV VIEVGISINTTY HIS. FMOM, Tay Malay Ww ie environment. Take the unnecessary wireless router to a sales outlet such as a eee Shop or follow the instructions by a local institution that handles used wireless routers. signals. May interfere with the operation of electronic equipment in some vehicle models. In this case, stop
Instruction using the wireless router. If any trouble on your skin occurs due to using the wireless router, immediately stop using it and seek medical treatment. Use of the wireless router may cause itching, rashes, eczema, etc. depending on your constitution or health condition. Refer to the following for details on materials of each part. 13
(&& P.17 Material list Contents/Precautions
Instruction Look at the display in a well-lit place, keeping a certain distance. Eyesight may be weakened etc. if you look at it in a dark Don't Don't Do not short-circuit the charger terminal when connected to an outlet or accessory socket. Also, do not allow any part of your body (hands, fingers, etc.) to come into contact with the charger terminal. May cause fires, burns, electric shock, etc. Do not place heavy objects on the cord of the adapter or apply excessive force on it such as pulling it. place or closely. Wiay Case INGs, VUITIS, CIECUIU SHOCK, ClO. When plugging/unplugging an AC adapter into/
from the outlet, do not allow metallic objects to Don't come into contact with the prongs of the plug. Handling adapters
. May cause fires, burns, electric shock, etc.
/\Warning Do not connect the voltage converter for overseas travel (travel converter) to the AC adapter. Don't May catch fire, or cause overheat, electric shock, etc. O Do not use if the cord of the adapter is damaged. May cause fires, burns, electric shock, etc. Don't OQ Do not apply excessive force on the connection AON Never use the adapter in humid locations such as a part with the adapter connected to the wireless Don't bathroom. May cause fires, burns, electric shock, etc. vont router. May cause fires, burns, bodily injury, electric
Dont The DC adapter should only be used in negative grounded vehicles. Never use it in positive grounded vehicles. May cause fires, burns, electric shock, etc.
Don't Do not touch adapters if you hear thunder. May cause electric shock etc. we No wet hands shock, etc. Do not handle the cord, charger terminal or power plug of the adapter with wet hands. May cause fires, burns, electric shock, etc. 14 Contents/Precautions
Instruction Always use the specified power supply and voltage. When using overseas, use the AC adapter that is available overseas. Using the incorrect power supply and voltage may cause fires, burns, electric shock, etc. AC adapter: 100V AC (Connect only with a household AC outlet) AC adapter available overseas: 100 to 240V AC (Connect only with a household AC outlet) Instruction When plugging/unplugging an adapter into/from the wireless router, plug/unplug it straightly toward the terminal to connect, not applying excessive force on it such as pulling the cord. May cause fires, burns, bodily injury, electric shock, etc. if you do not plug/unplug it correctly. Inetriictinn If the charger terminal is deformed such as bending it, immediately stop using. Also, do not use the arden cag MS ae oe dont So ee ee DC adapter: 12/24V DC (for negative grounded vehicles only) o Instruction If you replace the fuse in the DC adapter, always replace it with a specified fuse. May cause fires, burns, electric shock, etc. if you use the fuse other than specified one. Refer to the respective manuals for information on specified fuses.
| MSIVMETNCM VIS MY PCCUPIEIY Fe tU LS VIIa! Stave. May cause fires, burns, bodily injury, electric shock, etc. because of short circuit of it.
Instruction Wipe off any dust on the power plug. May cause fires, burns, electric shock, etc. if you use the power plug with dust adhering. Unplug Unplug the power plug of the adapter from the outlet or accessory socket when not using. May cause fires, burns, electric shock, etc. if you leave the power plug with it plugged into the outlet or accessory socket. Unplug If water or other liquids (drinking water, sweat, seawater, pet urine, etc.) enter the equipment, immediately remove the nower niliigq from the outlet Instruction Fully plug the adapter into the outlet or accessory socket. May cause fires, burns, electric shock, etc. if you do not insert it securely. ee a eee ie or accessory socket. May cause fires, burns, electric shock, etc. 0 Instruction Always grasp the adapters when unplugging the power plug from the outlet or accessory socket. Do not apply excessive force on it such as pulling the cord of the adapter. May cause fires, burns, electric shock, etc. since the cord of the adapter is damaged by pulling it. Unplug Always unplug the power plug from the outlet or accessory socket before cleaning the equipment. May cause fires, burns, electric shock, etc. if you do not unplug it. 15 Contents/Precautions
. Handling near electronic medical equipment
/\Caution ane near eee eee eee OQ Do not touch the adapter for a long time when /\Warn I ng connected to an outlet or accessory socket. Dont May cause burns etc. a> If you have electronic medical equipment such as an implanted cardiac pacemaker or an implanted Instruction cardioverter-defibrillator, always carry or use your Handling nano UIM card wireless router at least 15 cm away from your
/\Caution implant. Electromagnetic signals may have harmful effects on the operation of the electronic medical
Be careful with the cutting surface not to injure any part of your body such as fingers when handling Instruction the nano UIM card. May cause bodily injury etc. Instruction equipment. Patients receiving medical treatment away from a medical facility (e.g. home treatment) who are using electronic medical equipment other than implanted cardiac pacemakers or implanted cardioverter-defibrillators should consult the respective manufacturers etc. for information regarding the effects of signals on the equipment. Elartrnamannatic cinnale may hava harmfii| affacte ann tha SE ee a ee ee Le eee gs Cee Oe ee eee eee See ee eee operation of the electronic medical equipment. 16 Contents/Precautions
Instruction If there is any chance that the distance between the wireless router and a person closest to you may get shorter than 15 cm such as when you cannot freely move around, set the wireless router not to emit radio wave in advance (by setting Airplane mode, turning the power off, etc.). Somebody nearby may be equipped with electronic medical equipment such as an implanted cardiac pacemaker or an implanted cardioverter-defibrillator. Electromaanetic sianals Material list wireless router Part Material/Surface treatment ecee eoce ecco eee eecce ece ecee eee may have harmful effects on the operation of the electronic medical equipment. 0 Instruction Follow the instructions given by the respective medical facilities regarding the use of the wireless router on their premises. May have harmful effects on the operation of the electronic medical equipment. 17 Contents/Precautions Handling the sample (SIM eject tool) Z\Warning OQ The tip of the SIM eject tool is sharp. Do not use it pointing at yourself or others. Dont May hit you or others around you, resulting in bodily injury, loss of eyesight, etc. i Handling precautions General notes 18 Contents/Precautions
@ Use only optional parts specified by eee. May cause a malfunction or damage when optional parts other than those specified by eee are used.
@ Read the respective user's guides supplied with supported optional parts carefully. Do not drop or otherwise subject the equipment to severe impact. May cause a malfunction or damage.
@ Claan anly with a caf and Ary celath fench ac tha tuna ican Ree. 'G, * Sa oe fae > ade i ee ee ee ee ee Bee ee ee ee ee ee for eyeglasses). Forceful rubbing of the display with a dry cloth etc. may scratch its surface. Water drops, dirt, etc. left on the display may cause stains to form on its surface. Never use chemicals such as alcohol, thinners, benzene or detergents, as these agents may erase the printing or cause discoloration.
@ Occasionally clean terminals, etc. When using unclean terminals etc., they may not work properly. Be careful with the terminals etc. while cleaning them. NOTES aADOUT TNE WITCICSS FOULCT Do not forcefully press the display or operate with a pointed object. May scratch it and cause malfunction or damage.
@ Avoid using the wireless router in extremely high or low temperatures. Use the wireless router within the range of a temperature between 5C and 35C and a humidity between 35% and 85%. Refer to the following for details on using it at a bathroom.
@ Using the wireless router close to land-line phones, TVs, TAMING, VlY. IHGAY HAVE NAMM Cielo VILLI VUVCIGAUVE VE such equipment. Move as far away as possible from such items before use.
@ Do not place the equipment near an air conditioning vent. Condensation formed due to rapid changes in temperature may cause internal corrosion and lead to a malfunction.
@ Do not apply excessive force on the wireless router when using it. Carrying the equipment in a tightly packed bag or sitting on it put in your pocket may cause damage to the display, internal components, internal battery, etc. or result in a malfunction. Keeping an external connector device plugged into the external connection jack may cause damage or a malfunction. 19 Contents/Precautions
@ When connecting an external connector device to the The internal battery is not covered by warranty because it is external connection jack, do not put it in obliquely and do a consumable product. not pull it while it is plugged in. Depending on usage, the internal battery may swell as it approaches May cause a malfunction or damage. the end of its usable life. Change the battery if the its life becomes
@ The wireless router becomes warm during use or charging extremely shorter or the it swells even after fully charged.For details but this is not a malfunction. on replacing the internal battery, contact the number listed in Repairs (in Japanese only) on the last page or a repair counter that e e specifies. e Charge battery in areas where ambient temperature is between vU& and vol .
@ The battery life depends on the usage and deterioration of the battery.
@ Do not store the wireless router under the following situations because they may lower the performance or shorten the usable life of the internal battery. Storage with the internal battery fully charged (immediately after charging is completed) Storage with no battery level (cannot turn the wireless router on)
@ Never place a magnetic card or magnetized items near the Approximately 40% is recommended as the proper battery level for wireless router. The etnrad mannaticr data in rach rarde rradit rarde talanhnna storage.
(i Oe le) alee Wet we eee ee cards, floppy disks, etc. may be erased. Putting highly magnetized items closer may cause an error.
@ The following is the type of the internal battery built into the wireless router. Label Battery type Li-ion0dO Lithium-ion
@ The surface of the wireless router uses the aluminum material. Note that dent and abrasion are easily remained as aluminum is a soft material. 20 Contents/Precautions Notes about adapters Clean only with a soft and dry cloth (such as the type used Se eS for eyeglasses).
@ Charge the battery in areas where the ambient temperature @ To protect the environment, please take any unneeded nano is between 5C and 35C . ; ; UIM cards to a sales outlet such as a eee Shop.
@ Do not charge the internal battery in the following locations. Do not damage, touch haphazardly or short-circuit the IC. Areas with high humidity or dust, or in areas exposed to frequent May cause data loss or a malfunction. vibrations Do not drop or otherwise subject the nano UIM card to
* Close to land-line phones, TVs, radios, etc.
@ Adapters may become warm during charging but this is not Pa severe impact. May cause a malfunction. GTMaAMUUUU,
@ Do not use the DC adapter to charge the battery when the car engine is not running. May cause the car battery to run down.
@ When using an outlet with a feature to prevent the plug from being removed accidentally, follow the instructions in the outlet user's guide.
@ Do not subject to strong impacts. Also, do not deform the charger terminals. May cause a malfunction.
@ Never bend the nano UIM card or place heavy objects on it. May cause a malfunction. Do not insert the nano UIM card to the wireless router with a label, sticker, etc. attached on the card. May cause a malfunction. Notes adout Nano VIM Cara
@ Do not apply unnecessary force when inserting/removing the nano UIM card.
@ Customer is responsible for malfunctions arising from inserting nano UIM card into a different IC card reader/
writer etc.
@ Occasionally clean IC area. When using the nano UIM card while IC area is not clean, it may not work properly. 21 Contents/Precautions Notes about wireless LAN (WLAN)
@ Wireless LAN (WLAN) uses radio waves to communicate information. Therefore, it has an advantage of freely connecting to the LAN within the service area. On the other hand, if security setting is not set, it is possible for a malicious third party to intercept the communication contents or hack. It is recommended to set security setting at your own risk and judgement.
@ Wireless LAN Do not use wireless LAN near magnetic devices such as electric appliances or AV/OA devices or in radio waves. Magnetism or radio waves may increase noises or disable communications (especially when using a microwave oven). 22 Contents/Precautions When used near TV, radio, etc., reception interference may occur or channels on the TV screen may be disturbed. If there are multiple wireless LAN access points nearby and the same channel is used, search may not work correctly. Radio frequencies In the home screen menu, [ About Device] to confirm the radio frequencies the WLAN-installed devices use. The followings are the descriptions:
Oo @
Cautions on using 2.4 GHz devices WLAN-installed devices operate at radio frequencies assigned to the in-house radio stations for a mobile object identifier (radio stations requiring a license) used in production lines of a factory, specific low power radio stations (radio stations requiring no license), and amateur radio stations (radio stations requiring a license) in addition to industrial, scientific and medical devices or home electric appliances such as microwave ovens. 1. Before using this device, make sure that the in-house radio 2.4DS/OF4 2.4: This radio equipment uses the 2,400 MHz band.
@ DS: The modulation system is the DS-SS system.
@ OF: The modulation system is the OFDM system.
@ 4:The estimated coverage distance is 40 m or less. i GE WEEE: Al radio frequencies between 2,400 MHz and 2,483.5 MHz are used and the frequencies for mobile object identifiers can be avoided. stations for a mobile object identifier, specific low power radio stations and amateur radio stations are not operating nearby. If the device causes harmful radio interference to the in-house radio stations for a mobile object identifier, immediately change the radio frequency or stop use, and contact the number listed in General Inquiries on the last page for crosstalk avoidance, etc. (e.g. partition setup). If the device causes radio interference to specific low power radio stations for a mobile object identifier or amateur radio stations, contact the number listed in General Inquiries on OE ee en ee eT ae ee Available channels for the handset's wireless LAN are between 1 and DE EE ee eek a Cae Re 13. Note that other channel access points cannot be connected. Available channels may vary depending on the country. For use in an aircraft, contact the airline beforehand. 23 Contents/Precautions Voluntary control for radio wave interference This product satisfies technical requirements based on VCCI Rules for Voluntary Control Measures and its satisfied mark is displayed on the electronic nameplate of the product. You can see the electronic nameplate by operating the product as follows. In the home screen menu, f About Device]
Notes about the sample (SIM eject tool) Do not insert the SIM eject tool into the hole etc. other than those for ejecting the nano UIM Card. May cause a malfunction or damage. 2 UO NOL APPLY CACESSIVE FOTCe OF UIE ON CJSC LOO! WHET using it. May cause a malfunction or damage.
@ When discarding, segregate it according to the local rules.
@ Use the SIM eject tool only for the intended purpose in this manual. May cause a malfunction or damage.
@ Do not use the SIM eject tool for other mobile louters. May cause malfunction or damage of other mobile phones. 24 Contents/Precautions Caution
@ Never use the wireless router that is modified. Using a modified device violates the Radio Law and/or the Telecommunications Business Law. The wireless router follows the regulations regarding the certification of conformity with technical regulations for specific radio stations etc. based on the Radio Law and authentication of conformity with technical regulations for devices etc. based on the TRICUVILT TITUS DUSIIGSS LAW, GNM HIG TOU NU WULHOLTTILY Mark CS can be displayed on the electronic nameplate of the wireless router as a proof. You can see it by operating as follows. In the home screen menu, P[ About Device ]
If the screws of the wireless router are removed and a modification is given to the inside, the certification of conformity with technical regulations etc. will become invalid. Never use the wireless router without the valid certification etc. Doing so violates the Radio Law and/or the Telecommunications Business Law.
@ Be careful when using the wireless router while driving a motor venhicie. Using the wireless router in hand while driving is regarded as a punishable act. However, the punishment has no application in some cases such as when rescuing sick and injured people or maintaining public safety.
@ Never change the basic software improperly. This may be regarded as a conversion of software and repairs may be refused. 25 Contents/Precautions Before Using the Wireless router
(i Part names and functions Display/Touch panel For details on operation of the touch panel u E pyo Operation of touch panel Reset button nano UIM card Gi Power key Pressing it for at least 3 seconds to turn the power on while the power is turned off. Alternatively, pressing it for at least 2 seconds to use the menu such as [Cancel], [Power OFF]
and [Reboot] while the power is turned on.
@ Use to turn the display on/off. For details on operation of the power key power on/off Ei USB Type-C connection jack
@ Use to charge the wireless router etc.
@ USB Power Delivery charging is supported. 5 3 @ For details on connection to an external device K& P.xx Charging? P.xx PC connection? P.xx USB host function
(This drawing is not final) 28 Before Using the Wireless router Charging with AC adapter 3 When charging is complete, pull the AC adapter When charging with AC Adapter (sold separately), carry out power plug from the outlet and REMOVE the the following operations. Type-C plug of the AC adapter horizontally from 41 Insert the Type-C plug of the AC adapter the USB Type-C connection jack horizontally into the USB Type-C Refer to user's guide of AC Adapter. connection jack on the wireless router @ The shape of the plug for the AC adapter is for 100V AC (for domestic use). To use the AC adapter of 100 to 240V AC 9 cCrart the AC adantar nawer nliaq and incart it aS ee ee ge Pe ee BE ee ee ee ee Re ee ee ee ee a overseas, a conversion plug adapter applicable to your into an outlet country of stay is required. Do not use a voltage converter for overseas travel to charge the battery. Note that inserting or removing the equipment forcibly may cause damage to the USB Type-C connection jack and the Type-C plug or result in a malfunction. AC adapter Ae Charging with DC adapter a The DC adapter (sold separately) supplies the power for outlet charainga from a car accessorv socket (12 and 24V)._ USB Type-C USB Type-C plug SoS Se ee wee Se ee ee me ee RS eee ae OE The DC adapter should only be used in negative grounded vehicles (12 and 24V DC). Do not use with the car engine shut off. May drain the car battery.
@ The DC adapter fuse is a consumable product. For replacement, purchase a new fuse at a nearest auto parts retailer etc. Refer to the user's guide of DC Adapter for details. 36 Before Using the Wireless router Charging with USB Cable @ Turning display on/off
: 5 The display is turned off when (@) is pressed or the wireless You can charge the wireless router by connecting the router is not in use for a set length of time wireless router tora RG withUSB cable (sold Press C)@) while the display is turned off to turn it on. separately) etc.
@ Touch panel lock
] When the power or the display is turned on, the touch panel is
. locked.
& Turning power on Touch [11 to unlock. 1 @)(for at least 2 seconds)
@ When you turn the power on for the first time, make the initial aloes Biche settings (E= P.48 Initial settings). 1980.01.06 Turning power off/Reboot 4 )(for at least 1 second) i 0 : oy 2 Select an item ec
@ Power off: Turn off the wireless router. @ Slide to unlock wm Rehr "Raeahoot the wirelece rniiter 37 Before Using the Wireless router
@ Touch Touch a key or an item displayed on the screen and then release your finger from it to select or set it.
& Slide (Swipe)/Drag Move your finger while keeping it on the touch panel to scroll the screen or move an icon, a widget, etc. to the desired position. In addition, when you touch a menu or an item by mistake, move your finger away from it to cancel the selection. 39 Before Using the Wireless router Wi-Fi settings
@ Home screen menu rae e 4] | 8 | @ If you select an access point protected by security, enter the Ce ae password (security key) and select [CONNECT].
@ To register access points manually: [Add network] > enter the network name P set security [SAVE]
CRO I]
If you use the wireless router, you can use mail or Internet When you select an access point and connect to it with a by connecting to access points of your home, corporate wrong password (security key), [IP Configuration Failure], [WiFi network or public wireless LAN service. Connection Failure], [Authentication problem] or [Connected
(Limited)] is displayed. Confirm the password (security key). When [IP Configuration Failure] or [Connected (Limited)] is displayed after entering the correct password (security key), you may not have acquired the correct IP address. Connect to Packet communication is also available while [Wi-Fi] is set to On. Wi-Fi connection is prioritized while Wi-Fi connection is set, but the connection is automatically switched to that of LTE/3G naeatfuarl> anne VAS CI RAnnaAartian te tarminatarl Alata that nearlat ee ee See ee ee ares ce eee ee ee, ee a ee eee ee the access point again after confirming signal status. communication charges may be incurred in this case. 4 ; . i |
Operate access point registration near the access point. As for the manual registration of an access point, this function supports WEP, WPA/WPA2 PSK and 802.1xEAP as the security se setting. 1 In the home screen, > [Wi-Fi Guide] 2 : rene If you connect to an access point which is not connected to the 2 PIWPS] Internet, [ ] is displayed and the communication may be made by mobile networks, not Wi-Fi connection. To make Wi-Fi communication by using such an access point, enable [Using this AP without internet connection] of Advanced options before connecting to the access point. 3 Select an access point 50 Before Using the Wireless router Specific Absorption Rate (SAR) &
Power Density(PD) of Mobile device This model xxxx mobile device complies with Japanese tech-
nical regulations and international guidelines regarding expo-
sure to radio waves. This mobile device was designed in observance of Japanese tech-
nical regulations regarding exposure to radio waves (*1) and limits The actual TER of this mobile device while operating can be well below that indicated above. This is due to automatic changes to the power level of the device to ensure it only uses the minimum re-
quired to reach the network. Therefore in general, the closer you are to a base station, the lower the power output of the device. This mobile device can be used in positions other than against your head. Please keep the mobile router farther than 1.5 cm away from your body by using such as a carrying case or a wearable ea cacenuvteeinas Sitdbeant oe indian Be ea etnin TAia wmankites Heiden cates. to exposure to radio waves recommended by a set of equivalent in-
ternational guidelines. This set of international guidelines was set out by the International Commission on Non-lonizing Radiation Protection (ICNIRP), which is in collaboration with the World Health Organization (WHO), and the permissible limits include a substantial safety margin designed to assure the safety of all persons, regardless of age and health condition. The technical regulations and international guidelines set out limits for radio waves as the Specific Absorption Rate, or SAR and the ee A, CORT Ee ae ee ONE OE Oe Ree ie eee ee ee oe arco e ee the technical regulations and international guidelines. The World Health Organization has stated that a large number of studies have been performed over the last two decades to assess whether mobile phones pose a potential health risk. To date, no adverse health effects have been established as being caused by mobile phone use. Please refer to the WHO website if you would like more detailed information. http://www.who.int/docstore/peh-emf/publications/facts_press/ fact_ english.htm Power Density, or PD, wnicn Is the value absorbed energy over a 6-minute period. The SAR limit for mobile devices is 2.0 W/kg, and the PD limit for mobile devices is 2.0 mW/cm?. When the radio systems to be evaluated by each index operate simultaneously(*2), it stipulates that indicated by the Total Exposure Ratio (TER). The TER limit for mobile devices at this case is S 1. The highest TER value for this mobile device when tested for use when worn on the body is 0.995 (*3). There may be slight differences between the TER levels for each product, but they all satisfy the limit. Please refer to the websites listed below if you would like more detailed information regarding SAR & PD. Ministry of Internal Affairs and Communications Website:
http://www.tele.soumu.go.jp/e/sys/ele/index.htm Association of Radio Industries and Businesses Website:
http://www.arib-emf.org/01denpa/denpa02-02.html (in Japanese only)
*41 Technical regulations are defined by the Ministerial Ordinance Related to Radio Law (Article 14-2 of Radio Equipment PO ReguUIaUOns). 201 Appendix/Index
"2 Including other radio systems that can be simultaneously used with NR5G/LTE/WCDMA.
*3 The values used to calculate the TER of this mobile device are SAR 0.865 W/kg and PD 1.125 mW/cm?. European RF Exposure Information Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves aeveloped by the Indepenaent scientitic organization IUONIKF anda include safety margins designed to assure the protection of all persons, regardless of age and health. The guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2 W/kg and the highest SAR value for this device when tested when worn on the body is 1.90 W/kg" . For body-worn operation, this mo-
bile device has been tested and meets the RF exposure guidelines when used with an accessory containing no metal and positioning the wireless router a minimum of 5 mm from the body. Use of other accessories may not ensure compliance with RF exposure guide-
lines. As SAR is measured utilizing the devices highest transmitting power the actual SAR of this device while operating is typically below that indicated above. This is due to automatic changes to the power level of the device to ensure it only uses the minimum level required to reach the network.
* The tests are carried out in accordance with international guidelines for testing. 202 Appendix/Index Description of accessories Tx 704.5 to 746.5 MHz LTTE Band 28 | px 759.5 to 801.5 MHz USB cable For charging, peripherals, etc. LTE Band 38 Tx/RXx 2572.5 to 2617.5 MHz WLAN 2.4 GHz | Tx/Rx 2412 to 2472 MHz (BW: 20MHz only)
@ Frequency range of supported bands in EU WCDMA FDD |
WCDMA FDD VIII Tx 1922.4 to 1977.6 MHz Rx 2112.4 to 2167.6 MHz Tx 882.4 to 912.6 MHz Dv 097 A tn OLT CL NLIS BES AR Bat Se ee es oa BESS oe Tx 1922.5 to 1977.5 MHz PE Bareh Rx 2112.5 to 2167.5 MHz LTE Band 3 rei saoeiderae Me ceswer [RRS CHET StRE LTE Band 8 Reece Tio ane aK iapaaniae Tx 834.5 to 859.5 MHz Ry 7O2 5 tn 212865 MYyS yi 203 Appendix/Index
@ Maximum transmit power WCDMA FDD | +24 dBm (Power Class3) WCDMA FDD VIII +24 dBm (Power Class3) LTE Band 1 +23 dBm (Power Class3) LTE Band 3 +23 dBm (Power Class3) 1 TE Rand 7 +92 dRm (Power Clacec3) oye et eR ee ae we ee ee oe ee LTE Band 8
+23 dBm (Power Class3) LTE Band 20 +23 dBm (Power Class3) LTE Band 28 +23 dBm (Power Class3) LTE Band 38 +23 dBm (Power Class3) WLAN 2.4 GHz +18.5 dBm Battery - CAUTION FCC Notice
@ This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
@ Changes or modifications not expressly approved by the na a Ma oy En wa ot en a Poe te get: ap Use specified Charger only. Non-specified equipment use may cause malfunctions, electric shock or fire due to battery leakage, overheating or bursting. The battery is embedded inside the product. Avoid removing the embedded battery since this may cause overheating or bursting. Do not dispose of the product with ordinary refuse. Take the product to an Shop, or follow the local disposal regulations. Charge battery in ambient temperatures between 5C and 35C;
outside this range, battery may leak/overheat and performance may THANG! PROPUHOINIS IU VUITTIVNGIIUS CUMIN VUIN LIS UOtl So authority to operate the equipment. deteriorate. 204 Appendix/Index Information to User This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no quarantee that interference will not occur in a The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this device when tested for when worn on the body, as described in this user guide, is 1.38 W/kg. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines. Please use an accessory desig-
particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient/relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for nated for this product or an accessory which contains no metal and which positions the device a minimum of 1.0 cm from the body. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this device is on file with the FCC and can be found under the Display Neip. FCC RF Exposure Information Your device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of aae and health. Ofant SECON OF NUp-//Transitlon.1CC.gOv/OeCVEea/ICCia/ alter searching on FCC ID APYHROO0283. Additional information on Specific Absorption Rates (SAR) can be found on the FCC website at http://www.fcc.gov/general/radio-
frequency-safety-0. FCC ID Location The device is electronically labeled and you can see the FCC ID by operating the product as follows.
[ Slide to unlock ] > [ About Device ]
205 Appendix/Index