FCC ID: 2BDC6-1PMMINI Smart switch

EN USER AND SAFETY GUIDE Wi-Fi smart switch with power measurement functionality Shelly Plus 1PM Mini Read before use This document contains important technical and safety information about the device, its safe use and installation. CAUTION! Before beginning the installation, please read carefully and entirely this guide and any other documents accompanying the device. Failure to follow the installation procedures could lead to malfunction, danger to your health and life, violation of law or refusal of legal and/or commercial guarantee (if any). Shelly Europe Ltd. is not responsible for any loss or damage in case of incorrect installation or improper operation of this device due to failure of following the user and safety instructions in this guide. Product Introduction Shelly is a line of innovative microprocessor-managed de-

vices, which allow remote control of electric circuits through a mobile phone, tablet, PC, or home automation system. Shelly devices can work standalone in a local Wi-Fi network or they can also be operated through cloud home automa-

tion services. Shelly Cloud is a service that can be accessed using either an Android or iOS mobile application or with any internet browser at https://control.shelly.cloud/. Shelly de-

vices can be accessed, controlled, and monitored remotely from any place where the user has internet connectivity, as long as the devices are connected to a Wi-Fi router and the Internet. Shelly devices have an Embedded Web Interface accessible at http://192.168.33.1 when connected directly to the device access point, or at the device IP address on the local Wi-Fi network. The embedded Web Interface can be used to monitor and control the device, as well as adjust its settings. Shelly devices can communicate directly with other Wi-Fi devices through HTTP protocol. An API is provided by Shelly Europe Ltd. For more information, please visit:

https://shelly-api-docs.shelly.cloud/#shelly-family-overview. Shelly devices are delivered with factory-installed firmware. If firmware updates are necessary to keep the devices in conformity, including security updates, Shelly Europe Ltd. will provide the updates free of charge through the device Embedded Web Interface or the Shelly mobile application, where the information about the current firmware version is available. The choice to install or not the device firmware updates is the users sole responsibility. Shelly Europe Ltd. shall not be liable for any lack of conformity of the device caused by failure of the user to install the provided updates in a timely manner. Schematic 110 - 240 VAC L N SW O L N Fig. 1 Legend Device terminals:

SW: Switch input terminal O: Relay output terminal L: Live (110-240V) terminals N: Neutral terminals Wires:

N: Neutral wire L: Live wire (110 - 240 VAC) Installation Instructions Shelly Plus 1PM (the Device) is a small form factor smart switch with power measurement, which allows remote con-

trol of electric appliances. It can be retrofitted into standard electrical wall boxes, be-

hind power sockets and light switches or other places with limited space. CAUTION! Danger of electrocution. Mounting/installation of the Device to the power grid has to be performed with cau-

tion, by a qualified electrician. CAUTION! Danger of electrocution. Every change in the connections has to be done after ensuring there is no voltage present at the Device terminals. CAUTION! Do not open the device. It does not contain any parts that can be maintained by the user. For safety and licens-

ing reasons, unauthorized change and/or modification of the device is not permitted. CAUTION! Use the Device only with a power grid and ap-

pliances that comply with all applicable regulations. A short circuit in the power grid or any appliance connected to the Device may damage it. CAUTION! No SELV/PELV circuits may be connected to the terminals of the inputs and outputs, including the extension inputs. CAUTION! Do not connect the Device to appliances ex-

ceeding the given max load!

CAUTION! Connect the Device only in the way shown in these instructions. Any other method could cause damage and/or injury. CAUTION! Do not use the device if it shows signs of dam-

age! Do not attempt to service or repair the Device yourself!

CAUTION! Do not install the Device where it can get wet. CAUTION! The load current circuit has to be secured by a cable protection switch in accordance with EN60898-1 (trip-

ping characteristic B or C, max. 8 A rated current, min. 6kA interrupting rating, energy limiting class 3). RECOMMENDATION: Connect the Device using solid sin-

gle-core cables or stranded cables with ferrules. The cables should have insulation with increased heat resistance, not less than PVC T105C (221F). Before starting the mounting/installation of the Device, check that the breakers are turned off and there is no voltage on their terminals. This can be done with a phase tester or multimeter. When you are sure that there is no voltage, you can proceed to connecting the cables. Connect the load to the O terminal of the Device and the Neu-

tral wire, as shown on fig. 1. Connect the Live wire to an L terminal of the Device. Connect the Neutral wire to an N terminal of the Device. Con-

nect a switch or a button to the Device SW terminal and any of the unused L terminals of the Device. RECOMMENDATION: For inductive appliances that cause voltage spikes during switching on/off, such as electrical mo-

tors, fans, vacuum cleaners and similar ones, RC snubber (0.1 F / 100 / 1/2 W / 600 VAC) should be connected parallel to the appliance. The RC snubber can be purchased at https://www.shelly.cloud/en/products/shop/rc-snubber. Initial Inclusion If you choose to use the Device with the Shelly Smart Control mobile application and cloud service, instructions on how to connect the Device to the Cloud and control it through the Shelly Smart Control app can be found in the mobile appli-

cation guide. The Shelly mobile application and Shelly Cloud service are not conditions for the Device to function properly. This Device can be used standalone or with various other home automa-

tion platforms and protocols. CAUTION! Do not allow children to play with the buttons/

switches connected to the Device. Keep the devices for re-

mote control of Shelly (mobile phones, tablets, PCs) away from children. Specification Dimensions (HxWxD): 29x34x16 mm / 1.34x1.11x0.63 in Ambient temperature: -20 C to 40 C / -5 F to 105 F Humidity 30 % to 70 % RH Max. altitude 2000 m / 6562 ft Power supply: 110 - 240 VAC, 50/60Hz Electrical consumption: < 1.2 W Max. switching voltage: 240 VAC Max. switching current AC: 8 A Power metering: Yes Overpower protection: Yes Overcurrent protection: Yes Overvoltage protection: Yes Overtemperature Protection: Yes RF band: BT: 2402-2480MHzWIFI:2412-2472MHz Max. RF power: < 20 dBm Wi-Fi protocol: 802.11 b/g/n Wi-Fi operational range (depending on local conditions):

- up to 50 m / 160 ft outdoors

- up to 30 m / 100 ft indoors Bluetooth protocol: 4.2 Bluetooth operational range (depending on local condi-tions):

- up to 30 m / 100 ft outdoors

- up to 10 m / 33 ft indoors CPU: ESP32 Flash: 4 MB Schedules: 20 Webhooks (URL actions): 20 with 5 URLs per hook Scripting: mJS MQTT: Yes Declaration of conformity Hereby, Shelly Europe Ltd. declares that the radio equipment type Shelly Plus 1PM Mini is in compliance with Directive 2014/53/EU, 2014/35/EU, 2014/30/EU, 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address:

https://shelly.link/plus1pmmini_DoC Manufacturer: Shelly Europe Ltd. Address: 103 Cherni vrah Blvd., 1407 Sofia, Bulgaria Tel.: +359 2 988 7435 E-mail: support@shelly.cloud Official website: https://www.shelly.cloud Changes in the contact information data are published by the Manufacturer on the official website. All rights to the trademark Shelly and other intellectual rights associated with this Device belong to Shelly Europe Ltd.. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Stromkreise angeschlossen werden VORSICHT! Schlieen Sie das Gert nicht an Gerte an, die die angegebene Hchstlast berschreiten!

VORSICHT! Schlieen Sie das Gert nur auf die in dieser Anleitung beschriebene Weise an. Jede andere Methode kann zu Schden und/oder Verletzungen fhren!

VORSICHT! Benutzen Sie das Gert nicht, wenn es Anzei-

chen von Beschdigungen aufweist! Versuchen Sie nicht, das Gert selbst zu warten oder zu reparieren!

VORSICHT! Installieren Sie das Gert nicht an einem Ort, an dem es nass werden kann!

ACHTUNG! Der Laststromkreis muss durch einen Lei-

tungsschutzschalter nach EN60898-1 abgesichert sein (Aus-

lsecharakteristik B oder C, max. 8 A Nennstrom, min. 6 kA Ausschaltvermgen, Energiebegrenzungsklasse 3). EMPFEHLUNG: Schlieen Sie das Gert mit massiven ein-

adrigen Kabeln oder Litzenkabeln mit Aderendhlsen an. Die Kabel sollten eine Isolierung mit erhhter Wrmebestndigkeit haben, mindestens PVC T105C (221F). Bevor Sie mit der Installation/Montage des Gerts beginnen, prfen Sie, ob die Leitungsschutzschalter (Sicherungen) ausgeschaltet sind und keine Spannung an den Klemmen anliegt. Dies kann mit einem Phasenprfer oder Multimeter erfolgen. Wenn Sie sicher sind, dass keine Spannung anliegt, knnen Sie mit dem Anschluss der Kabel fortfahren!

Verbinden Sie die Last mit der O-Klemme des Gerts und den Neutralleiter, wie in Abb. 1 dargestellt. Verbinden Sie die Pha-

se mit einer L-Klemme des Gerts. Verbinden Sie den Neutralleiter mit einer N-Klemme des Ge-

rts. Verbinden Sie einen Schalter oder einen Taster mit der SW-Klemme des Gerts und einer der unbenutzten L-Klem-

men. EMPFEHLUNG: Bei induktiven Gerten, die beim Ein- und Ausschalten Spannungsspitzen verursachen, wie z. B. Elekt-

romotoren, Ventilatoren, Staubsauger und hnliche, sollte ein RC-Snubber (0,1 F / 100 / 1/2 W / 600 VAC) parallel zum Gert angeschlossen werden. Der RC-Snubber kann unter https://www.shelly.cloud/en/products/shop/rc-snubber er-

worben werden. Erstmalige Einbindung Wenn Sie das Gert mit der Shelly Smart Control App und unserem Cloud-Dienst nutzen und steuern mchten, finden Sie Anweisungen dazu in der Anleitung zur Mobilanwendung. Die Shelly App und der Shelly Cloud Service sind keine Vo-

raussetzung fr die ordnungsgeme Funktion des Gerts!

Dieses Gert kann eigenstndig oder mit verschiedenen anderen Hausautomatisierungsplattformen und -protokollen verwendet werden. VORSICHT! Erlauben Sie Kindern nicht, mit den an das Ge-

rt angeschlossenen Tasten/Schaltern zu spielen. Halten Sie die Gerte zur Fernsteuerung des Shelly (z.B.: Mobiltelefone, Tablets, PCs) von Kindern fern. Spezifikation Abmessungen (HxBxT): 29x34x16 mm / 1.34x1.11x0.63 in Umgebungstemperatur: -20 C bis 40 C / -5 F bis 105 F Luftfeuchtigkeit 30 % bis 70 % RH Max. Hhe .M.: 2000m / 6562 ft Spannungsversorgung: 110 - 240 VAC, 50/60Hz Elektrischer Verbrauch: < 1,2 W Maximale Schaltspannung: 240 VAC Maximaler Schaltstrom AC: 8 A Leistungsmessung: Ja berlastungsschutz: Ja berstromschutz: Ja berspannungsschutz: Ja bertemperatur-Schutz: Ja Frequenzband: BT: 2402-2480MHzWIFI:2412-2472MHz Max. Sendeleistung in Frequenzband: <20 dBm WLAN-Protokoll: 802.11 b/g/n WLAN-Reichweite (abhngig von den rtlichen Gegeben-

heiten):

- bis zu 50 m / 160 ft im Freien

- bis zu 30 m / 100 ft in Innenrumen Bluetooth-Protokoll: 4.2 Bluetooth-Reichweite (abhngig von den rtlichen Gege-

benheiten):

- bis zu 30 m / 100 ft im Freien

- bis zu 10 m / 33 ft in Innenrumen CPU: ESP32 Flash: 4 MB Zeitplne: 20 WebHooks (URL-Aktionen): 20 mit 5 URLs pro WebHook Skripting: mJS MQTT: Ja Konformittserklrung Hiermit erklrt Shelly Europe Ltd., dass der Funkanlagentyp Shelly Plus 1PM Mini der Richtlinie 2014/53/EU, 2014/35/

EU, 2014/30/EU, 2011/65/EU entspricht. Den vollstndigen Text der EU-Konformittserklrung finden Sie unter folgender Internetadresse https://shelly.link/plus1pmmini_DoC Hersteller: Shelly Europe Ltd. Adresse: 103 Cherni vrah Blvd., 1407 Sofia, Bulgarien Tel.: +359 2 988 7435 E-Mail: support@shelly.cloud Offizielle Website: https://www.shelly.cloud nderungen der Kontaktdaten werden vom Hersteller auf dessen offiziellen Website verffentlicht Alle Rechte an der Marke Shelly und anderen geistigen Eigentumsrechten im Zusammenhang mit diesem Gert ge-

hren Shelly Europe Ltd.. DE in einem BENUTZER- UND SICHERHEITSHANDBUCH Smarter WLAN-Switch mit Leistungsmessungsfunktion Shelly Plus 1PM Mini Bitte vor Gebrauch durchlesen Dieses Dokument enthlt wichtige technische und sicher-

heitstechnische Informationen ber das Gert und seine sichere Verwendung und Installation. ACHTUNG! Bevor Sie mit der Installation beginnen, lesen Sie bitte die Begleitdokumentation sorgfltig und vollstndig durch. Die Nichtbeachtung der empfohlenen Verfahren kann zu Fehlfunktionen, Lebensgefahr oder Gesetzesversten fh-

ren. Shelly Europe Ltd. haftet nicht fr Verluste oder Schden im Falle einer falschen Installation oder Bedienung dieses Gerts. Produktvorstellung Shelly ist eine Produktserie innovativer, mikroprozessor-

gesteuerter Gerte, welche die Fernsteuerung von Elektro-

gerten ber ein Mobiltelefon, ein Tablet, einen PC oder ein Hausautomatisierungssystem ermglichen. Shelly Gerte knnen eigenstndig lokalen WLAN-Netzwerk arbeiten oder sie knnen auch ber Cloud-Dienste fr die Hausautomatisierung betrieben werden. Shelly Cloud ist ein solcher Dienst, auf den entweder ber eine Android- oder iOS-

Applikation oder ber einen beliebigen Internetbrowser unter https://control.shelly.cloud/ zugegriffen werden kann. Shel-

ly Gerte knnen von jedem Ort aus, an dem der Benutzer eine Internetverbindung hat, angesprochen, gesteuert und berwacht werden, solange die Gerte mit einem WLAN-

Router und dem Internet verbunden sind. Shelly Gerte verfgen ber eine integrierte Web-Schnittstelle, die unter http://192.168.33.1 im WLAN-Netzwerk zugnglich ist, das vom Gert im Access Point-Modus erstellt wird, oder unter der IP-Adresse des Gertes im WLAN-Netzwerk, mit dem es verbunden ist. Die integrierte Web-Schnittstelle kann zur berwachung und Steuerung des Gertes sowie zur Anpas-

sung dessen Einstellungen verwendet werden. Shelly Gerte knnen direkt mit anderen WLAN-Gerten ber das HTTP-Protokoll kommunizieren. Eine API wird von Shelly Europe Ltd. bereitgestellt. Fr weitere Informationen besuchen Sie bitte:

https://shelly-api-docs.shelly.cloud/#shelly-family-overview. Shelly Gerte werden mit werkseitig installierter Firmware ausgeliefert. Um die Gerte konform zu halten, stellt Shelly Europe Ltd. die notwendigen Firmware-Updates, einschlie-

lich der Sicherheitsupdates, kostenlos ber die im Gert eingebettete Web-Schnittstelle sowie ber die Shelly-App zur Verfgung. Die Entscheidung, die Firmware-Updates des Gerts zu installieren oder nicht, obliegt der alleinigen Ver-

antwortung des Benutzers. Shelly Europe Ltd. haftet nicht fr Konformittsmngel des Gerts, die darauf zurckzufhren sind, dass der Benutzer die bereitgestellten Updates nicht rechtzeitig installiert hat. Schematische Darstellung 110 - 240 VAC L N SW O L N Abb.1 Legende Gerteanschlsse:

SW: Klemme fr Schaltereingang O: Relaisausgang L: Klemme fr Phase (110-240 VAC) N: Klemme fr Neutralleiter Drhte:

N: Neutralleiter L: Phasenleiter (110 - 240 VAC) Installationsanleitung Shelly Plus 1PM Mini (das Gert) ist ein smarter Switch in kompakter Form und Leistungsmessung, der die Fernsteue-

rung von Elektrogerten ermglicht. Es kann in Standard-Unterputzdosen, hinter Steckdosen und Lichtschaltern oder an anderen Orten mit begrenztem Platz nachgerstet werden. VORSICHT! Gefahr eines Stromschlages. Die Montage/In-

stallation des Gerts an das Stromnetz muss von einem quali-

fizierten Elektriker mit Vorsicht durchgefhrt werden!

VORSICHT! Es besteht Stromschlaggefahr. Bei jeder nde-

rung der Anschlsse muss sichergestellt werden, dass an den Klemmen des Gerts keine Spannung anliegt!

VORSICHT! ffnen Sie das Gert nicht. Es enthlt keine Teile, die vom Benutzer gewartet werden knnen. Aus Sicher-

heits- und Zulassungsgrnden ist das eigenmchtige Vern-

dern und/oder Modifizieren des Gertes nicht gestattet VORSICHT! Verwenden Sie das Gert nur mit einem Stromnetz und Gerten, die allen geltenden Vorschriften ent-

sprechen. Ein Kurzschluss im Stromnetz oder in einem an das Gert angeschlossenen Gertes kann dieses beschdigen!

VORSICHT! An den Klemmen der Ein- und Ausgnge, ein-

schlielich der Schaltereingnge, drfen keine SELV/PELV-

IT GUIDA ALLUSO E ALLA SICUREZZA Interruttore intelligente Wi-Fi con funzionalit di misurazione della potenza. Shelly Plus 1PM Mini Leggere prima delluso Questo documento contiene importanti informazioni tecni-

che e di sicurezza sul dispositivo e sul suo uso e installa-

zione in sicurezza. ATTENZIONE! Prima di iniziare linstallazione leggere at-

tentamente e completamente la documentazione allegata. La mancata osservanza delle procedure consigliate potrebbe portare a malfunzionamenti, pericolo per la vita o violazione della legge. Shelly Europe Ltd. non responsabile per even-

tuali perdite o danni in caso di installazione o funzionamento errati di questo dispositivo. Introduzione al prodotto Shelly una linea di dispositivi innovativi gestiti da mi-

croprocessori che permettono il controllo remoto degli elettrodomestici attraverso un telefono cellulare, un tablet, un PC o un sistema domotico. I dispositivi Shelly sono in grado di funzionare autonomamente in una rete Wi-Fi locale o possono anche essere gestiti attraverso servizi di automazione domestica cloud. Shelly Cloud un servizio di questo tipo a cui si pu accedere utilizzando unapplicazio-

ne mobile Android o iOS o con qualsiasi browser internet su https://control.shelly.cloud/. I dispositivi Shelly sono ac-

cessibili, controllati e monitorati a distanza da qualsiasi luogo in cui lutente abbia una connettivit Internet, purch i dispositivi siano collegati a un router Wi-Fi e a Internet. I dispositivi Shelly hanno uninterfaccia web incorporata ac-

cessibile a http://192.168.33.1 nella rete Wi Fi, creata dal di-

spositivo in modalit Access Point, o allindirizzo URL del di-

spositivo nella rete Wi-Fi a cui connesso. Linterfaccia web incorporata pu essere utilizzata per monitorare e controllare il dispositivo, cos come per regolare le sue impostazioni. I dispositivi Shelly sono in grado di comunicare direttamen-

te con altri dispositivi Wi-Fi attraverso il protocollo HTTP. UnAPI fornita da Shelly Europe Ltd.. Per maggiori informa-

zioni, visitare:

https://shelly-api-docs.shelly.cloud/#shelly-family-overview. I dispositivi Shelly vengono consegnati con un firmware installato in fabbrica. Se sono necessari aggiornamenti del firmware per mantenere i dispositivi in conformit, compresi gli aggiornamenti di sicurezza, Shelly Europe Ltd. fornir gli aggiornamenti gratuitamente attraverso linterfaccia web in-

corporata del dispositivo o lapplicazione mobile Shelly, dove sono disponibili le informazioni sulla versione corrente del firmware. La scelta di installare o meno gli aggiornamenti del firmware del dispositivo di esclusiva responsabilit dellutente. Shelly Europe Ltd. non responsabile per qual-

siasi mancanza di conformit del dispositivo causata dalla mancata installazione degli aggiornamenti forniti dallutente in modo tempestivo. Schema 110 - 240 VAC L N SW O L N Fig. 1 Legenda Terminali del dispositivo:

SW: Terminale di ingresso interruttore O: Terminale di uscita rel L: Terminali sotto tensione (110-240 VAC). N: Terminali neutro Fili:

N: Filo neutro L: Filo sotto tensione (110 - 240 VAC). Istruzioni per linstallazione Shelly Plus 1PM (il Dispositivo) un interruttore intelligente con fattore di forma ridotto con misurazione della potenza, che consente il controllo remoto degli apparecchi elettrici. Pu essere adattato a una console da incasso standard, die-

tro prese di corrente e interruttori della luce o in altri luoghi con spazio limitato. ATTENZIONE! Pericolo di folgorazione. Il montaggio/

installazione del dispositivo alla rete elettrica deve essere ese-

guito con cautela da un elettricista qualificato. ATTENZIONE! Pericolo di folgorazione. Ogni modifica dei collegamenti deve essere effettuata dopo essersi assicurati che non ci sia tensione ai morsetti dellapparecchio. ATTENZIONE! Non aprire il Dispositivo. Il dispositivo non contiene parti che possano essere manutenute dallutente. Per motivi di sicurezza e di licenza, non consentito appor-

tare modifiche e/o cambiamenti non autorizzati al dispositivo. ATTENZIONE! Utilizzare lapparecchio solo con una rete elettrica e con apparecchi conformi a tutte le norme vigenti. Un cortocircuito nella rete elettrica o in qualsiasi apparecchio collegato allapparecchio pu danneggiare lapparecchio. ATTENZIONE! Ai morsetti degli ingressi e delle uscite, compresi gli ingressi di espansione, non devono essere colle-

gati circuiti SELV/PELV. ATTENZIONE! Non collegare lapparecchio ad apparecchi che superano il carico massimo indicato!

ATTENZIONE! Collegare lapparecchio solo nel modo in-

dicato in queste istruzioni. Qualsiasi altro metodo potrebbe causare danni e/o lesioni. ATTENZIONE! Non utilizzare il Dispositivo se presenta se-

gni di danneggiamento! Non tentare di riparare il dispositivo da soli!

ATTENZIONE! Non installare il dispositivo in un luogo che possa bagnarsi. ATTENZIONE! Il circuito della corrente di carico deve esse-

re protetto da un interruttore di protezione del cavo conforme alla norma EN60898-1 (caratteristica di intervento B o C, max. 8 A di corrente nominale, min. 6 kA di potere di interruzione, classe di limitazione dellenergia 3). RACCOMANDAZIONE: Collegare il dispositivo utilizzando cavi unipolari solidi o cavi a trefoli con ghiere. I cavi devono avere un isolamento con una maggiore resistenza al calore, non inferiore a PVC T105C (221F). Prima di iniziare linstallazione/montaggio del dispositivo, controllare che gli interruttori siano spenti e che non ci sia tensione sui loro terminali. Questo pu essere fatto con un misuratore di fase o un multimetro. Quando siete sicuri che non c tensione, potete procedere al collegamento dei cavi. Collegare il carico al terminale O del Dispositivo e al filo Neu-

tro, come mostrato in fig. 1. Collegare il filo Sotto tensione a un terminale L del dispositivo. Collegare il filo Neutro a un terminale N del dispositivo. Collegare un interruttore o un pulsante al terminale SW del Dispositivo e a uno qualsiasi dei terminali L non utilizzati del Dispositivo. RACCOMANDAZIONE: Per gli apparecchi induttivi che causano picchi di tensione durante laccensione e lo spegni-

mento, come motori elettrici, ventilatori, aspirapolvere e simili, necessario collegare in parallelo allapparecchio uno snub-

ber RC (0,1F / 100 / 1/2 W / 600 VAC). Lo snubber RC pu essere acquistato sul sito https://www.shelly.cloud/en/products/shop/rc-snubber. Inclusione iniziale Se scegli di utilizzare il Dispositivo con lapplicazione mobile Shelly Smart Control e il servizio cloud, le istruzioni su come connettere il Dispositivo al Cloud e controllarlo tramite lapp Shelly Smart Control sono disponibili nella guida dellapplica-

zione mobile. Lapplicazione mobile Shelly e il servizio Shelly Cloud non sono condizioni per il corretto funzionamento del Dispositivo. Questo Dispositivo pu essere utilizzato con vari altri servizi e applicazioni di automazione domestica. ATTENZIONE! Non permettere ai bambini di giocare con i pulsanti/interruttori collegati al Dispositivo. Tenere i dispositi-

vi per il controllo remoto di Shelly (telefoni cellulari, tablet, PC) lontano dai bambini. Specifiche Dimensioni (AxLxP): 29x34x16 mm / 1.34x1.11x0.63 in Temperatura ambiente: da -20 C a 40 C / da -5 F a 105 F Umidit Dal 30 % al 70 % di umidit relativa Altitudine massima: 2000 m / 6562 ft Alimentazione: 110 - 240 VAC, 50/60Hz Consumo elettrico: < 1,2 W Tensione di commutazione massima: 240 VAC Corrente di commutazione massima AC: 8 A Misurazione della potenza: S Protezione da sovralimentazione: S Protezione da sovracorrente: S Protezione da sovratensione: S Protezione da sovratemperatura: S Bande di radiofrequenza: BT:

2402-2480MHzWIFI:2412-2472MHz Massima potenza a radiofrequenza: <20 dBm Protocollo Wi-Fi: 802.11 b/g/n Intervallo operativo Wi-Fi (a seconda delle condizioni lo-

cali):

- fino a 50 m / 160 ft allaperto

- fino a 30 m / 100 ft allinterno Protocollo Bluetooth: 4.2 Intervallo operativo Bluetooth (a seconda delle condizioni locali):

- fino a 30 m / 100 ft allaperto

- fino a 10 m / 33 ft allinterno CPU: ESP32 Flash: 4 MB Pianificazioni: 20 Webhook (azioni URL): 20 con 5 URL per ogni hook Scripting: mJS MQTT: S Dichiarazione di conformit Con la presente, Shelly Europe Ltd. dichiara che il tipo di apparecchiatura radio Shelly Plus 1PM Mini conforme alla Direttiva 2014/53/UE, 2014/35/UE, 2014/30/UE, 2011/65/

UE. Il testo completo della dichiarazione di conformit UE disponibile al seguente indirizzo internet https://shelly.link/plus1pmmini_DoC Produttore: Shelly Europe Ltd. Indirizzo: 103 Cherni vrah Blvd., 1407 Sofia, Bulgarien Tel.: +359 2 988 7435 E-mail: support@shelly.cloud Sito web ufficiale: https://www.shelly.cloud Le modifiche ai dati di contatto sono pubblicate dal Produtto-

re sul sito Web ufficiale. Tutti i diritti sul marchio Shelly e altri diritti intellettuali asso-

ciati a questo dispositivo appartengono a Shelly Europe Ltd.. 25/2023 ES MANUAL DE USO Y SEGURIDAD Rel con conexin Wi-Fi y medidor de potencia. Shelly Plus 1PM Mini Lea antes de utilizar Este documento contiene informacin tcnica y de segu-

ridad importante sobre el aparato, su uso y su instalacin segura. ATENCIN! Antes de comenzar la instalacin, lea atenta-

mente y por completo la documentacin adjunta. El incumpli-

miento de los procedimientos recomendados puede provocar un mal funcionamiento, un peligro para su vida o una violacin de la ley. Shelly Europe Ltd. no se hace responsable de cual-

quier prdida o dao debido a una instalacin o uso inadecua-

do de este dispositivo. Resumen del producto Shelly es una gama de dispositivos innovadores basados en microprocesadores, que permiten controlar a distancia los electrodomsticos a travs de un telfono mvil, una tableta, una PC o un sistema domtico. Los dispositivos Shelly pueden funcionar de forma autnoma en una red Wi-Fi local o tambin pueden ser operados por servicios de automatizacin del hogar a travs de la nube. Shelly Cloud es un servicio que se puede utilizar a travs de la aplicacin mvil Android o iOS, o a travs de cualquier navegador web en https://control.shelly.cloud/. Los dispositivos Shelly se pueden manejar, controlar y supervisar a distancia desde cualquier lugar en el que el usuario disponga de una cone-

xin a Internet, siempre que los dispositivos estn conecta-

dos a un router Wi-Fi y a Internet. Los dispositivos Shelly tienen una interfaz web integrada a la que se puede acceder en http://192.168.33.1 dentro de la red Wi-Fi, creada por el dispositivo en modo de punto de acceso, o en la URL del dis-

positivo en la red Wi-Fi a la que est conectado. La interfaz web integrada puede utilizarse para supervisar y controlar el dispositivo y ajustar su configuracin. Los dispositivos Shelly pueden comunicarse directamente con otros dispositivos Wi-Fi a travs de HTTP. Shelly Europe Ltd. proporciona una API. Para ms informacin, visite https://shelly-api-docs.shelly.cloud/#shelly-family-overview. Los dispositivos Shelly vienen con el firmware instalado de fbrica. Si es necesario actualizar el firmware para que los dispositivos sigan cumpliendo la normativa, incluidas las ac-

tualizaciones de seguridad, Shelly Europe Ltd. proporcionar las actualizaciones de forma gratuita a travs de la interfaz web integrada en el dispositivo o la aplicacin mvil Shelly, donde est disponible la informacin de la versin actual del firmware. La decisin de instalar o no las actualizaciones del firmware del dispositivo es responsabilidad exclusiva del usuario. Shelly Europe Ltd. no se hace responsable de la falta de conformidad del Dispositivo causada por el hecho de que el Usuario no instale oportunamente las actualizaciones previstas. Esquema 110 - 240 VAC L N SW O L N Imagen 1 Leyenda Terminales del dispositivo:

SW: Terminal de entrada del interruptor O: Terminal de salida de rel L: Terminales de corriente (110-240 VCA) N: Terminales neutro Cableado:

N: Cable neutro L: Cable de fase (110 - 240 VCA) Instrucciones de instalacin Shelly Plus 1PM (el Dispositivo) es un interruptor inteligente de pequeo formato con medicin de potencia, que permite el control remoto de aparatos elctricos. Pueden instalarse en un cuadro elctrico, detrs de enchufes e interruptores de luz o en otros lugares con poco espacio. ATENCIN! Peligro de descarga elctrica. El montaje/ins-

talacin del aparato a la red elctrica debe ser realizado con cuidado, por un electricista cualificado. ATENCIN! Peligro de descarga elctrica. Cualquier modi-

ficacin de las conexiones debe realizarse despus de asegu-

rarse de que no hay tensin en los terminales del Dispositivo. ATENCIN! No abra el Dispositivo. No contiene ninguna pieza que pueda ser mantenida por el usuario. Por razones de seguridad y licencia, no se permite el cambio y/o modificacin no autorizados del dispositivo. ATENCIN! Utilice el dispositivo slo con una fuente de alimentacin y un equipo que cumplan con todas las normas aplicables. Un cortocircuito en la red elctrica o en cualquier dispositivo conectado al aparato puede daar el aparato. ATENCIN! No se pueden conectar circuitos SELV/PELV a los terminales de las entradas y salidas, incluidas las entradas de extensin. ATENCIN! No conecte el aparato a dispositivos que su-

peren la carga mxima indicada. ATENCIN! Conecte el aparato slo de la manera indicada en estas instrucciones. Cualquier otro mtodo puede causar daos y/o lesiones. ATENCIN! No use el Dispositivo si muestra signos de dao! No intente reparar o reparar el dispositivo usted mismo!

ATENCIN! No instale el aparato en un lugar donde pueda mojarse. PRECAUCIN! El circuito de corriente de carga debe ase-

gurarse mediante un interruptor de proteccin de cables con-

forme a EN60898-1 (caracterstica de disparo B o C, mx. 8 A de corriente nominal, mn. 6 kA de capacidad de interrupcin, clase de limitacin de energa 3). RECOMENDACIN!: Conecte el dispositivo con cables unipolares slidos o cables trenzados con casquillos. Los cables deben tener un aislamiento con mayor resistencia al calor, no inferior a PVC T105C (221F). Antes de iniciar la instalacin/montaje del aparato, comprue-

be que los disyuntores estn desconectados y que no haya tensin en sus bornes. Esto puede hacerse con un medidor de fase o un multmetro. Cuando est seguro de que no haya tensin, puede proceder a conectar los cables. Conecte la carga al terminal O del Dispositivo y al cable Neu-

tro, como se muestra en la imagen 1. Conecte el cable de Fase a un terminal L del Aparato. Conecte el cable Neutro a un terminal N del Aparato. Conecte un interruptor o pulsador al terminal SW del Aparato y a uno de los terminales L no utilizados del aparato. RECOMENDACIN: En el caso de los aparatos inductivos que provocan picos de tensin durante el encendido y el apa-

gado, como los motores elctricos, los ventiladores, las aspi-

radoras y otros similares, debe conectarse un amortiguador RC (0,1 F / 100 / 1/2 W / 600 VCA) en paralelo al aparato. El amortiguador RC puede adquirirse en https://www.shelly.cloud/en/products/shop/rc-snubber. Inclusin inicial Si decide utilizar el Dispositivo con la aplicacin mvil Shelly Smart Control y el servicio Shelly Cloud, las instrucciones para conectar el Dispositivo a la nube y controlarlo a travs de la App Shelly se encuentran en la Gua de la App. La aplicacin mvil Shelly y el servicio Shelly Cloud no son con-

diciones para el buen funcionamiento del Dispositivo. Este dispositivo puede utilizarse con otros servicios y aplicacio-

nes de domtica. ATENCIN! No permita que los nios jueguen con los bo-

tones/interruptores conectados al aparato. Mantenga los dis-

positivos que permiten el control remoto de Shelly (telfonos mviles, tabletas, ordenadores) fuera del alcance de los nios. Especificaciones Dimensiones (AxAxP): 29x34x16 mm / 1.34x1.11x0.63 in Temperatura ambiente: -20 C a 40 C / -5 F a 105 F Humedad 30 % a 70 % HR Altitud mxima: 2000 m / 6562 ft Alimentacin: 110 - 240 VCA, 50/60Hz Consumo elctrico: < 1,2 W Tensin de conmutacin mx.: 240 VCA Corriente mxima de conmutacin CA: 8 A Medicin de potencia: S Proteccin contra sobrecarga: S Proteccin contra sobrecorriente: S Proteccin contra sobretensiones: S Proteccin contra sobretemperatura: S Banda de radiofrecuencia: BT:

2402-2480MHzWIFI:2412-2472MHz Potencia mxima de radiofrecuencia: <20 dBm Protocolo Wi-Fi: 802.11 b/g/n Alcance operativo de Wi-Fi (dependiendo de las condicio-nes locales):

- hasta 50 m / 160 ft en exteriores

- hasta 30 m / 100 ft en interiores Protocolo Bluetooth: 4.2 Alcance operativo de Bluetooth (dependiendo de las con-diciones locales):

- hasta 30 m / 100 ft en exteriores

- hasta 10 m / 33 ft en interiores CPU: ESP32 Flash: 4 MB Horarios: 20 Webhooks (acciones URL): 20 con 5 URLs por hook Scripting: mJS MQTT: S Declaracin de conformidad Shelly Europe Ltd. declara por medio de la presente que el equipo de radio tipo Shelly Plus 1PM Mini cumple con las directivas 2014/53/UE, 2014/35/UE, 2014/30/UE, 2011/65/

UE. El texto completo de la declaracin de conformidad de la UE est disponible en la siguiente direccin web https://shelly.link/plus1pmmini_DoC Fabricante: Shelly Europe Ltd. Direccin: 103 Cherni vrah Blvd., 1407 Sofia, Bulgarien Tel: +359 2 988 7435 Correo electrnico: support@shelly.cloud Sitio web oficial: https://www.shelly.cloud Los cambios en la informacin de contacto son publicados por el fabricante en el sitio web oficial. Todos los derechos de las marcas Shelly, y otros derechos de propiedad intelectual asociados a este dispositivo perte-

necen a Shelly Europe Ltd.. PT GUIA DO UTILIZADOR E DE SEGURANA Interruptor inteligente Wi-Fi com funcionalidade de medio de potencia. Shelly Plus 1PM Mini Leia antes de utilizar Este documento contm importante informao tcnica e de segurana relativa ao dispositivo, sua utilizao segura e instalao. ATENO! Antes de iniciar a instalao, por favor leia atentamente e na ntegra a documentao includa. O in-

cumprimento dos procedimentos recomendados podero dar origem a avarias, perigo sua vida ou violao da lei. A Shelly Europe Ltd. no se responsabiliza por quaisquer perdas ou danos em caso de uma incorreta instalao ou incorreta utilizao deste dispositivo. Apresentao do Produto Shelly uma linha de dispositivos inovadores geridos por micro-processador, que permitem o controlo remote de eletrodomsticos atravs de telemvel, tablet, PC ou siste-

ma de domtica. Os dispositivos Shelly podem funcionar isoladamente numa rede Wi-Fi local ou podem tambm ser operados atravs de servios de domtica em nuvem. Shelly Cloud um desses servios que pode ser acedido usando uma aplicao mvel Android ou iOS, ou com um qualquer browser de internet em https://control.shelly.cloud/. Os dispositivos Shelly podem ser acedidos, controlados e monitorizados remotamente a partir de qualquer localiza-

o onde o Utilizador tiver uma conexo internet, desde que os dispositivos estejam conectados a um router Wi-Fi e Internet. Os dispositivos Shelly possuem um Interface Web embutido e acessvel em http://192.168.33.1 na rede Wi-Fi, criada pelo dispositivo em modo Ponto de Acesso

(AP), ou no endereo URL do dispositivo na rede Wi-Fi a que est ligado. O Interface Web embutido pode ser usado para monitorizar e controlar o dispositivo, assim como ajustar as suas configuraes. Os dispositivos Shelly podem comunicar diretamente com outros dispositivos Wi-Fi atravs do protocolo HTTP. Uma App fornecida por Shelly Europe Ltd.. Para mais informa-

o, por favor visite:

https://shelly-api-docs.shelly.cloud/#shelly-family-overview. Os dispositivos Shelly so distribuidos com firmware ins-

talado em fbrica. Se forem necessrias atualizaes ao firmware de forma a manter os dispositivos em conformi-

dade, incluindo atualizaes de segurana, Shelly Europe Ltd. fornecer as atualizaes gratuitamente atravs do In-

terface Web embutido ou da Aplicao Mvel Shelly, onde a informao sobre a verso de firmware atual se encontra acessvel. A escolha em instalar ou no instalar as atualiza-

es de firmware do Dispositivo responsabilidade nica do utilizador. Shelly Europe Ltd. no se responsabiliza por qual-

quer falha na conformidade do Dispositivo causada pela no instalao das atualizaes disponveis em tempo til, por parte do Utilizador. Esquema 110 - 240 VAC L N SW O L N Fig. 1 Legenda Terminais do dispositivo:

SW: Terminal de entrada de interruptor O: Terminal de sada do rel L: Terminais ativo (110-240 VCA) N: Terminais neutro Fios:

N: Fio neutro L: Fio ativo (110 - 240 VCA) Instrues de Instalao Shelly Plus 1PM (o Dispositivo) um switch inteligente de fa-

tor de forma pequeno com medio de energia, que permite o controle remoto de aparelhos eltricos. Pode ser adaptado em caixas de parede eltricas padro, atrs de tomadas e interruptores de luz ou outros locais com espao limitado. ATENO! Perigo de eletrocusso. A montagem/instala-

o do Dispositivo rede eltrica deve ser executada com precauo, por um eletricista qualificado. ATENO! Perigo de eletrocusso. Qualquer alterao nas ligaes s deve ser executada depois de assegurado de que no existe qualquer voltagem nos terminais do Dispositivo. ATENO! No abra o Dispositivo. Este no contm quais-

quer peas que possam ser mantidas pelo utilizador. Por mo-

tivos de segurana e de licena, no permitida a alterao e/

ou modificao no autorizada do aparelho. ATENO! Utilize o Dispositivo apenas com uma rede eltrica e eletrodomsticos que estejam de acordo com os regulamentos aplicveis. Um curto-circuito na rede eltrica ou num dos eletrodomsticos conectados poder danificar o Dispositivo. ATENO! No permitida a ligao de circuitos SELV/

PELV aos terminais das entradas e sadas, incluindo as en-

tradas de extenso. ATENO! No conecte o Dispositivo a electrodomsticos se estes excederem a carga mxima permitida. ATENO! Conecte o Dispositivo apenas da forma ilus-

trada nestas instrues. Qualquer outra forma poder causar danos e/ou acidentes. ATENO! No utilize o Dispositivo se este apresentar si-

nais de danos! No tente efetuar a manuteno ou reparao do aparelho por si prprio!

ATENO! No instale o dispositivo num local que possa ficar molhado. ATENO! O circuito de corrente de carga tem de ser pro-

tegido por um interrutor de proteo de cabos de acordo com a norma EN60898-1 (caraterstica de disparo B ou C, mx. 8 A de corrente nominal, mn. 6 kA de capacidade de interrupo, classe de limitao de energia 3). RECOMENDAO: Ligue o Dispositivo utilizando cabos slidos de ncleo nico ou cabos tranados com virolas. Os cabos devem ter um isolamento com maior resistncia ao ca-

lor, no inferior a PVC T105C (221F). Antes de iniciar a montagem/instalao do Dispositivo, cer-

tifique-se de que os disjuntores esto desligados e de que no existe qualquer voltagem nos seus terminais. Isto pode ser verificado com um multmetro ou medidor de fase. Assim que se certificar de que no existe qualquer voltagem, pode-

r ento proceder com a cablagem. Conecte a carga ao terminal O do Dispositivo e ao fio Neutro, conforme mostrado na fig. 1. Conecte o fio Ativo a um termi-

nal L do Dispositivo. Conecte o fio neutro a um terminal N do Dispositivo. Conecte uma chave ou um boto ao terminal SW do Dispositivo e a qualquer um dos terminais L no utilizados do Dispositivo.. RECOMENDAO: Na utilizao com electrodomsticos de indutncia que possam causar picos de tenso ao ligar/

desligar, tais como motores eltricos, ventonhas, aspiradores e similares, um Snubber RC (0,1 F / 100 / 1/2 W / 600 VCA) deve ser conectado em paralelo com o electrodomstico. O Snubber RC pode ser adquirido em:

https://www.shelly.cloud/en/products/shop/rc-snubber. Incluso Inicial Se voc optar por usar o dispositivo com o aplicativo mvel Shelly Smart Control e o servio de nuvem, as instrues so-

bre como conectar o dispositivo nuvem e control-lo por meio do aplicativo Shelly Smart Control podem ser encontra-

das no guia do aplicativo mvel. O aplicativo mvel Shelly e o servio Shelly Cloud no so condies para que o Disposi-

tivo funcione corretamente. Este dispositivo pode ser usado de forma independente ou com vrias outras plataformas e protocolos de automao residencial. ATENO! No permita que crianas brinquem com os bo-

tes/comutadores conectados ao Dispositivo. Mantenha os Dispositivos de controlo remoto do Shelly (telemveis, tablets, PCs) fora do alcance das crianas. Especificaes Dimenses (AxLxP): 29x34x16 mm / 1.34x1.11x0.63 in Temperatura ambiente: -20 C a 40 C / -5 F a 105 F Umidade 30% a 70% RH Altitude mxima: 2000 m / 6562 ft Fonte de alimentao: 110 - 240 VCA, 50/60Hz Consumo eltrico: < 1,2 W Tenso mxima de comutao: 240 VCA Corrente mxima de comutao CA: 8 A Medio de potncia: Sim Proteo de sobrepotncia: Sim Proteo de sobrecorrente: Sim Proteo de sobretenso: Sim Proteo de sobretemperatura: Sim Banda de radiofrequncias: BT:

2402-2480MHzWIFI:2412-2472MHz Potncia mxima de radiofrequncias: <20 dBm Protocolo Wi-Fi: 802.11 b/g/n Alcance de operao de Wi-Fi (dependendo das Protocolo Bluetooth: 4.2 Alcance de operao de Bluetooth (dependendo das condies locais):

- at 50 m / 160 ft no exterior

- at 30 m / 100 ft no interior con-dies locais):

- at 30 m / 100 ft no exterior

- at 10 m / 33 ft no interior CPU: ESP32 Flash: 4 MB Agendamentos: 20 Webhooks (aes URL): 20 com 5 URLs por cada hook Scripting: mJS MQTT: Sim Declarao de conformidade A Shelly Europe Ltd. declara por este meio que o equipamen-

to rdio tipo Shelly Plus 1PM Mini opera conforme a Diretriz 2014/53/EU, 2014/35/EU, 2014/30/EU, 2011/65/EU. O texto completo da declarao da UE sobre a conformidade est disponvel no seguinte endereo de internet https://shelly.link/plus1pmmini_DoC Fabricante: Shelly Europe Ltd. Endereo: 103 Cherni vrah Blvd., 1407 Sofia, Bulgria Tel.: +359 2 988 7435 E-mail: support@shelly.cloud Site oficial: https://www.shelly.cloud Alteraes nos endereos de contato so publicados pelo Fabricante no website oficial. Todos os direitos sobre a marca registada Shelly e outros direitos de propriedade intelectual associados a este Dispo-

sitivo pertencem a Shelly Europe Ltd.. ch aux bornes des entres et des sorties, y compris les en-

tres dextension. ATTENTION ! Ne branchez pas le Dispositif dautres ap-

pareils dont la charge maximale indique est dpasse !

ATTENTION ! Suivez les instructions indiques pour connecter le Dispositif. Toute autre mthode pourrait engen-

drer des dommages et/ou des blessures. ATTENTION ! Ne pas utiliser le dispositif sil prsente des signes de dtrioration ! Nessayez pas dentretenir ou de r-

parer le Dispositif vous-mme !

ATTENTION ! Ninstallez pas le Dispositif dans un endroit susceptible dtre expos lhumidit. ATTENTION ! Le circuit de charge doit tre scuris par un interrupteur de protection conforme la norme EN60898-1

(courbe de dclenchement B ou C, 8 A max., pouvoir de cou-

pure 6 kA min., classe de limitation dnergie 3). RECOMMANDATION : Branchez le Dispositif laide de cbles monoconducteurs ou des cbles toronns avec em-

bouts. Les cbles doivent tre dots dune isolation offrant une rsistance accrue la chaleur, au moins gale au PVC T105C (221F). Avant de commencer linstallation/le montage du Dispositif, vrifiez que le disjoncteur soit teint et quil ny ait pas de ten-

sion aux bornes. Ceci peut tre fait avec un testeur de phase ou un multimtre. Lorsque vous tes srs quil ny a pas de tension, vous pouvez procder au raccordement des cbles. Branchez la charge la borne O du Dispositif et au fil Neutre comme indiqu sur limage 1. Branchez le fil Phase une borne L du Dispositif. Branchez le fil Neutre une borne N du Dispositif. Branchez un interrupteur ou un bouton la borne SW du Dispositif et lune des bornes L non utilises du Dispositif. RECOMMANDATION : Pour les appareils inductifs qui provoquent des pics de tension lors de la mise en marche/

arrt tels que les moteurs lectriques, les ventilateurs, les aspirateurs et similaires, un amortisseur de pics de tension pour charges inductives (RC Snubber) (0,1F / 100 / 1/2 W

/ 600 V AC) doit tre connect en parallle lappareil. Le RC Snubber peut tre achet dans la boutique :

https://www.shelly.cloud/en/products/shop/rc-snubber. Intgration initiale Si vous choisissez dutiliser le Dispositif avec lapplication Shelly Smart Control et le service Shelly Cloud, les instruc-

tions pour connecter le Dispositif au Cloud et le contrler de-

puis lapplication Shelly se trouvent dans le guide de lappli-

cation mobile. Lapplication Shelly et le service Shelly Cloud ne sont pas indispensables au bon fonctionnement du Dispo-

sitif. Ce Dispositif peut tre utilis avec dautres services et applications domotiques. ATTENTION ! Ne laissez pas les enfants jouer avec les boutons/interrupteurs connects au Dispositif. Gardez les dis-

positifs permettant de contrler Shelly distance (tlphone portable, tablette, ordinateur), hors de porte des enfants. Caractristiques techniques Dimensions (HxLxP): 29x34x16 mm / 1.34x1.11x0.63 in Temprature ambiante : -20 C 40 C / -5 F 105 F Humidit : 30 % 70 %

Altitude maximale: 2000 m / 6,562 ft Alimentation lectrique : 110 - 240 V AC, 50/60Hz Consommation lectrique : < 1,2 W Tension de commutation maximale : 240 V AC Courant de commutation max AC : 8 A Mesure de la puissance : Oui Protection contre les surpuissances : Oui Protection contre les surintensits : Oui Protection contre les surtensions : Oui Protection contre la surchauffe : Oui Bande de radiofrquences: BT:

2402-2480MHzWIFI:2412-2472MHz Puissance de radiofrquence maximale : < 20 dBm Norme Wi-Fi : 802.11 b/g/n Porte du Wi-Fi (en fonction des collectivits locales) :

- jusqu 50 m / 164 ft lextrieur

- jusqu 30 m / 98 ft lintrieur Norme Bluetooth : 4.2 Porte du Bluetooth (en fonction des collectivits locales):

- jusqu 30 m / 98 ft lextrieur

- jusqu 10 m / 33 ft lintrieur CPU : ESP32 Flash : 4 MB Programmations : 20 Webhooks (actions URL) : 20 avec 5 URLs par hook Scripts : mJS MQTT : Oui Dclaration de conformit Par la prsente, Shelly Europe Ltd. dclare que lquipement radio de type Shelly Plus 1PM Mini est conforme la direc-

tive 2014/53/UE, 2014/35/UE, 2014/30/UE, 2011/65/UE. Le texte complet de la dclaration de conformit de lUE est dis-

ponible ladresse internet suivante https://shelly.link/plus1pmmini_DoC Fabricant : Shelly Europe Ltd. Adresse : 103, Boulevard Cherni vrah, 1407 Sofia, Bulgarie Tl : +359 2 988 7435 Email : support@shelly.cloud Site officiel : https://www.shelly.cloud Les modifications des coordonnes, faites par le fabricant, sont publies sur le site officiel. Tous les droits de la marque Shelly et autres droits de pro-

prit intellectuelle associs ce Dispositif appartiennent Shelly Europe Ltd.. FR NOTICE DUTILISATION ET CONSIGNES DE SCURIT Commutateur connect Wi-Fi avec compteur lectrique Shelly Plus 1PM Mini lire avant utilisation Ce document contient des informations techniques et des consignes de scurit importantes concernant le dispositif, son utilisation et son installation. ATTENTION ! Avant de commencer linstallation, veuillez lire attentivement et entirement cette notice dutilisation. Le non-respect des procdures recommandes peut entraner un dysfonctionnement, reprsenter un danger ou tre une vio-

lation de la loi. Shelly Europe Ltd. nest pas responsable des pertes ou des dommages causs lors dune installation ou utilisation inadquate de ce dispositif. Prsentation du produit Shelly est une gamme de dispositifs innovants grs par microprocesseur, qui permettent de contrler distance les appareils lectriques par le biais dun tlphone portable, dune tablette, dun PC ou dun systme domotique. Les dis-

positifs Shelly peuvent fonctionner de manire autonome connects au Wi-Fi ou ils peuvent galement tre exploits par des services domotiques depuis le Cloud. Shelly Cloud est un service qui peut tre utilis depuis lapplication An-

droid ou iOS, ou via nimporte quel navigateur Internet sur https://control.shelly.cloud/. Les dispositifs Shelly peuvent tre utiliss et contrls distance depuis nimporte quel endroit o lutilisateur dispose dune connexion Internet, condition que les dispositifs soient connects au Wi-Fi et lInternet. Les dispositifs Shelly ont une interface Web int-

gre accessible ladresse suivante http://192.168.33.1 au sein du rseau Wi-Fi, cre par le dispositif en mode point daccs sans fil ou ladresse URL du dispositif sur le rseau Wi-Fi auquel il est connect. Linterface Web intgre peut tre utilise pour surveiller et contrler le dispositif ainsi que pour ajuster ses paramtres. Les dispositifs Shelly peuvent communiquer directement avec dautres dispositifs connects en Wi-Fi par le biais du protocole HTTP. Une API est fournie par Shelly Europe Ltd.. Pour plus dinformations, veuillez visiter :

https://shelly-api-docs.shelly.cloud/#shelly-family-overview. Les dispositifs Shelly sont livrs avec un micrologiciel (fir-

mware) pr-install. Si des mises jour du sont ncessaires pour maintenir les dispositifs conformes ainsi que mettre jour les consignes de scurit, Shelly Europe Ltd. les fournira gratuitement depuis linterface Web intgre au dispositif ou depuis lapplication Shelly, o les informations sur la version actuelle du micrologiciel sont disponibles. Le choix dins-

taller ou non les mises jour du micrologiciel du dispositif relve de la seule responsabilit de lutilisateur. Shelly Europe Ltd. nest aucunement responsable de tout manque de la conformit du dispositif caus par le fait que lutilisateur na pas install les mises jour fournies en temps voulu. Schma 110 - 240 VAC L N SW O L N Image 1 Lgende Bornes du dispositif :

SW : Borne dentre de linterrupteur O : Borne de sortie du relais L : Borne pour la Phase (110-240 VAC) N : Borne pour le Neutre Fils :

N : Fil Neutre L : Fil Phase (110 - 240 VAC) Instructions dinstallation Shelly Plus 1PM (le Dispositif) est un commutateur connect de petit format qui dispose dun compteur lectrique et il per-

met de contrler distance les appareils lectriques. Il peut tre install dans votre tableau lectrique, derrire vos prises et interrupteurs ou dans dautres endroits o lespace est limit. ATTENTION ! Risque dlectrocution. Le montage/linstal-

lation du Dispositif sur le rseau lectrique doit tre effectu avec prudence, par un lectricien qualifi. ATTENTION ! Risque dlectrocution. Chaque modification des connexions doit tre effectue aprs que vous vous soyez assurs quil ny ait aucune tension aux bornes du Dispositif. ATTENTION ! Ne pas ouvrir le dispositif. Il ne contient au-

cune pice pouvant tre entretenue par lutilisateur. Pour des raisons de scurit et de licence, il est interdit de modifier le dispositif sans autorisation. ATTENTION ! Nutilisez le Dispositif quavec un rseau lectrique et des appareils conformes toutes les rglemen-

tations applicables. Un court-circuit sur le rseau lectrique ou tout appareil connect au Dispositif peut lendommager. ATTENTION ! Aucun circuit SELV/PELV ne peut tre bran-

Reference No.: WTX23X09212561W001/002 Page 1 of 9 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format FCC ID: 2BDC6-1PMMINI Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

Shelly Enno pe Ltd. Date: 2023-11-09 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 USA Ref: Attestation Statements Part 2.911(d Grantee Code: 2BDC6 Applicant FRN: 0034405464 d) (7) Filing Shelly Europe Ltd. certifies that, as of the date of the filing of the application, Shelly USA, INC is our designated U.S. agent for service of process for the above referenced Grantee Code. Shelly Europe Ltd. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Shelly USA, INC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced Grantee Code Designated U.S. Agent Information:

Name: Shelly USA, INC U.S. Agent FRN: The agent for service of process does no other business with the FCC and does not have an FRN. Address: 980 Federal Highway Suite 430, Boca Raton Florida 33432 USA Contact Person: Svetlin Todorov Tel.: +1 (702) 533 3307 Email: svetlin.todorov@shelly.com Sincerely, Signed on behalf of Shelly Europe Ltd. Cyth one J Hilly Signed on behalf of Shelly USA, INC. Suethin Vodovev-

Name: Svetozar Iliev Name: Svetlin Todorov Title: CEO Title: Chief Executive Officer Date: 2023-11-09 Date: 2023-11-09

Shelly Europe Ltd. Date: 2024-04-11 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d) (5) (i) Filing SUBJECT: FCC Application for FCC ID: 2BDC6-1PMMINI To Whom It May Concern:

Shelly Europe Ltd. certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules.

[Svetozar lliev, Managing Director]

Shelly Europe Ltd. Date: 2024-04-11 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref: Attestation Statements Part 2.911(d) (5) (ii) Filing SUBJECT: FCC Application for FCC ID: 2BDC6-1PMMINI To Whom It May Concern:

Shelly Europe Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely,

[Svetozar lliev, Managing Director]

Shelly Europe Ltd. Date: 2024-04-11 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2BDC6-1PMMINI Confidentiality Request To whom it may concern, Pursuant to the provisions of the Commission's rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. Block Diagram [J Tune-Up Information Operational Description Security Information Schematics Software Defined Radio (SDR) Information Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application.

Shelly Europe Ltd. Date: 2024-04-11 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCCID: 2BDC6-1PMMINI Model Declaration Letter Dear Regulatory Authority, Model(s): SNSW-001P8EU, Shelly 1PM Mini Gen3 are same to the model Shelly Plus 1PM Mini, these models are same PCB Layout, Schematics, BOM. Only for different model name and appearances for different market require. Sincerely,

[Svetozar lliey, Managing Director]

Shelly Europe Ltd. Date: 2024-04-11 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2BDC6-1PMMINI POWER OF ATTORNEY To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Shelly Europe Ltd. are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Signatory

[Svetozar lliev, Managing Director]