FCC ID: 2BDC6-PMMINI Wi-Fi smart power meter

110 - 240 VAC L N O O L N 110 - 240 VAC L N 110 - 240 VAC L N O O L N O O L N FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Reference No.: WTX23X09212563W001/002 Page 1 of 9 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format FCC ID: 2BDC6-PMMINI Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

Shelly Europe Ltd. Date: 2024-04-09 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d) (5) (i) Filing SUBJECT: FCC Application for FCC ID: 2BDC6-PMMINI To Whom It May Concern:

Shelly Europe Ltd. certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signat

[Svetozar lliv, General Manager]

Shelly Europe Ltd. Date: 2024-04-09 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref: Attestation Statements Part 2.911(d) (5) (ii) Filing SUBJECT: FCC Application for FCC ID: 2BDC6-PMMINI To Whom It May Concern:

Shelly Europe Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely, Signatory

[Svetozar lliev, General Manager]

Shelly Europe Ltd. Date: 2024-04-09 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2BDC6-PMMINI Confidentiality Request To whom it may concern, Pursuant to the provisions of the Commission's rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. Block Diagram Tune-Up Information Operational Description Security Information Schematics Software Defined Radio (SDR) Information Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. or For 180 days pursuant to KDB 726920 DO1. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely,

Shelly Europe Ltd. Date: 2024-04-09 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCCID: 2BDC6-PMMINI Model Declaration Letter Dear Regulatory Authority, Model(s): Shelly PM Mini Gen3, SNPM-001PCEU16 are same to the model Shelly Plus PM Mini, these models are same PCB Layout, Schematics, BOM. Only for different model name and appearances for different market require. Sincerely, Signatory

[Svetozar lliev, Geperal Manager]

Shelly Europe Ltd. Date: 2024-04-09 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2BDC6-PMMINI POWER OF ATTORNEY To Whom It May Concern:

|, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Shelly Europe Ltd. are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Signatory

[Svetozar lliev,

Shelly Enno pe Ltd. Date: 2023-11-09 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 USA Ref: Attestation Statements Part 2.911(d Grantee Code: 2BDC6 Applicant FRN: 0034405464 d) (7) Filing Shelly Europe Ltd. certifies that, as of the date of the filing of the application, Shelly USA, INC is our designated U.S. agent for service of process for the above referenced Grantee Code. Shelly Europe Ltd. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Shelly USA, INC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced Grantee Code Designated U.S. Agent Information:

Name: Shelly USA, INC U.S. Agent FRN: The agent for service of process does no other business with the FCC and does not have an FRN. Address: 980 Federal Highway Suite 430, Boca Raton Florida 33432 USA Contact Person: Svetlin Todorov Tel.: +1 (702) 533 3307 Email: svetlin.todorov@shelly.com Sincerely, Signed on behalf of Shelly Europe Ltd. Cyth one J Hilly Signed on behalf of Shelly USA, INC. Suethin Vodovev-

Name: Svetozar Iliev Name: Svetlin Todorov Title: CEO Title: Chief Executive Officer Date: 2023-11-09 Date: 2023-11-09