FCC ID: 2AUEPSTWSC6-43T5 smart RGBIC light strip kit

Product features WIFI+IR control Various dream color modes include running water, rainbow etc. Voice and intelligent speaker control DIY seven color changing and dimming Remote controllable after connect to internet Color Input voltage Power Time switch Music sync Paramters Model No. STWSC6-43T2 STWSC6-43T3 STWSC6-43T5 Other optional plugs

...... Installation 1.Use the power adapter with DC12/24V of output voltage only. 2.Install the controller correctly, use 3M tape to fix it. 3.Please unfold the LED strip to avoid the overheat issues. Please connect the cables of LED strip with the right position on the controller. Test the APP to check if it can control the LED strip correctly. If everything goes well, go to next step. 4.Check and ensure the power supply, controller and LED strip are connected correctly. Attentions 1. Do not put any metal around the controller, which could blocked WiFi signal. 2. Ensure the power supply and controller are connected correctly. 3. The power supply output voltage should be same as LED strip working voltage. 4. Do not cover anything on the surface of power supply, controller and LED strip. RGB 12/24Vdc Max. 48W 5. Ensure the connection is correct before powering. Product functions diagram Download APP 1: Search the APP- SMART LIFE from A pple store or Google P lay. 2: Scan the QR c ode from the label or user manual. Android supports at least 5.0 system, iOS supports at least 10.0 system

(App versions below 3.20 are iOS 9.0. Only suitable for mobile phones, not for tablets and other devices), Bluetooth devices V5.0. Log in/Register an account Open the APP - Smart Life, s ign up for a new acc ount or log in with an existing ac count. APP connection 1.P reparation jobs: P ower on the LED s trip and enter the home of APP, please make 2.Connect the controller sure your mobile and the smart k its are connec ted to the s ame WIFI. Solution 1) : A fter powering on the strip, turn on and off 3 times (or long press the switch button for over 5 sec onds), the strip will go into a s tatus of quick flashing. Find the + (in the c orres ponding room of the APP) to add devices. If your mobile have already turned on bluetooth before connecting the LED strip, then no need to turn on bluetooth again, the APP will c onnect to the LED strip automatic ally. If your m obile didnt turn on bluetooh before connecting the LED strip, the APP will pop up an interface with tips to ask you to turn on bluetooth. Then please c hoose Allow, then the bluetooth function of your mobile will be turned on. A fter that, the APP will pop up tips with info of the LED strips, then c hoose Go to add. Will go into an interface of bluetooth dev ice, choose the + and go into next interface(Enter Wi-Fi password). Input the pass word of the WIFI and choose Confirm, then it will go into status of Connecting......, you will need to await for your mobile to pair ing with the c ontroller at this step. Choose Done when it s hows Added suc ces sfully, then go into oper ation modes. (If s olution 1 is not s uitable with your devices, please r efer to solution 2) Solution 2) : A fter powering on the strip, turn on and off 3 times(or long press the switch button for over 5 seconds), the strip will go into a status of quick flashing. Find the + (in the corresponding room of the APP) into interface of Add manually. Then choose lighting to choose the correct smart devices and go into interface of S elect 2.4 GHz Wi-Fi Network and enter password. Enter the Wi-Fi password, then choose Next and waiting until pairing success(make sure your mobile and the smart devices are in the same Wi-Fi networks). Then g o into the interface of S canning devices, after scanning success and choose Next, it will pop up interface of add successfully and choose Done to go into the operation modes. Step 3) 1:IR recevier 2: DC12/24V input connection port. 3:Output connection port to connect to LED strip. 4.Function button:Turn ON Turn OFF(two short click) Modes Change Long press the button for over 5 seconds to reset or network pairing. 3.When connecting with the power supply, the led strip not flash. Please press the function button for over 5 seconds, then the light flash, enter into the APP and choose to add all the device in the corresponding room in the APP. Enter into the interface of adding lighting device and match the LED strip. Third party control In the S mart Life APP: Find more s ervice in "Me" menu, and find More servic e, youll find the third-party ac cess s ervice (Alexa/ Google Assistant/Tecent X iaowei/

DuerOS /Dingdong etc) , select the service you need. Connect to the third-party service device according to the operation guide. IR Music remote controller manual Product dimension 71.2 mm 71.2 mm Wiring diagram smart RGBIC light strip kit User manual Interface introduction 1.APP preset scene types include: Quiet, Active and Romantic. The quiet scenes include:Film, Dating, sunset and Christmas. The active scenes include: Romantic, Colorful, Dynamic and Dream The romantic scenes include: Rainbow, Flowing water. The APP could DIY various customized scenes.(The customized scenes will appear in the UI of scenes after setting.) 2.Music modes Rhythm Roll Energy Spectrum The APP interface, please s ubject to the latest version. Please contact customer service for any update of product or APP. FCC Warning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Product introduction:

The 19 keys IR remote control could realize various dreamcolor modes include running water and music modes etc. Parameters:

Power supply: 3V button cell Control distance: 5-8 meters in open area Instructions of remote control:

Please remove the PVC insulation sheet from the end of the remote control before using. Please set the APP internet connection as priority when the light is blinking. Features action Remote control buttons ON/OFF Short Press Music mode pause/beat Short Press Speed/sensitivity Short Press Dynamic mode switching Short Press Music mode Short Press Automatic mode Short Press Brightness +/-

Short Press Static color switching Short Press W R G B Short Press

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AUEPSTWSC6-43T5 Label and Location smart RGBIC light strip kit Model No.: STWSC6-43T5 FCC ID: 2AUEPSTWSC6-43T5 Size: L2.0cm*W1.5cm Label Location This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1

SHEN ZHEN CL LIGHTING TECHNOLOGY CO.,LTD Agent Authorization Company: SHEN ZHEN CL LIGHTING TECHNOLOGY CO.,LTD Address: Floor 4, Bldg. B, #1, 3rd Indl. zone, Shiyan, Baoan Shenzhen China 518108 Product Name: smart RGBIC light strip kit Trade Mark:

Model Number(s): STWSC6-43T5, STWSC6-43T2, STWSC6-43T3, STWSC6-43TA, STWSC6-43TB, STWSC6-23T2, STWSC6-23T3, STWSC6-23T5, STWSC6-23TA, STWSC6-23TB, STWSC6-44T2, STWSC6-44T3, STWSC6-44T5, STWSC6-44TA, STWSC6-44TB, STWSC6-24T2, STWSC6-24T3, STWSC6-24T5, STWSC6-24TA, STWSC6-24TB FCC ID: 2AUEPSTWSC6-43T5 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Cailan zhang Title:

CEO Date: 2021-09-10 Company: SHEN ZHEN CL LIGHTING TECHNOLOGY CO.,LTD

SHEN ZHEN CL LIGHTING TECHNOLOGY CO.,LTD Address: Floor 4, Bldg. B, #1, 3rd Indl. zone, Shiyan, Baoan Shenzhen China 518108 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Dear Sir/Madam, We, SHEN ZHEN CL LIGHTING TECHNOLOGY CO.,LTD Hereby declares the following statement for MiCOM Labs Inc, PCB board, structure and internal of these model(s) are the same, Only models nameand shape is different for these models:

Product Name: smart RGBIC light strip kit Trade Mark:

Model Number(s): STWSC6-43T5, STWSC6-43T2, STWSC6-43T3, STWSC6-43TA, STWSC6-43TB, STWSC6-23T2, STWSC6-23T3, STWSC6-23T5, STWSC6-23TA, STWSC6-23TB, STWSC6-44T2, STWSC6-44T3, STWSC6-44T5, STWSC6-44TA, STWSC6-44TB, STWSC6-24T2, STWSC6-24T3, STWSC6-24T5, STWSC6-24TA, STWSC6-24TB FCC ID: 2AUEPSTWSC6-43T5 Signature:

Name:

Cailan zhang Title:

CEO Date: 2021-09-10 Company: SHEN ZHEN CL LIGHTING TECHNOLOGY CO.,LTD

SHEN ZHEN CL LIGHTING TECHNOLOGY CO.,LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AUEPSTWSC6-43T5 Date:2021-09-10 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Declaration of Software Security Requirements For U-NII Devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Cailan zhang Title: CEO