FCC ID: 2AUEPTYWMC3-25T10 WIFI Music Strip Light Kit

User Manual FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Reorient or relocate the receiving antenna. Reorient or relocate the receiving antenna. Consult the dealer or an experienced radio/TV technician for help important announcement Important Note:

Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Features WIFI controller Full range of W/ W + WW/RGB

/ RGBW/RGBW available Voice and intelligent speaker control 5-100% stepless dimming Timer switch Remote controllable after connecting to internet Music :External microphone receives sound Item.NO Colour Input Voltage Power Current TYWFC3-41 TYWFC3-42 TYWFC3-43 TYWFC3-44 TYWFC3-45 W CCT RGB 12-24Vdc Max.48W 2A*1CH Max.2A 12-24Vdc 12-24Vdc Max.48W 2A*2CH Max.2A Max.48W 2A*3CH Max.2A RGB+W 12-24Vdc Max.48W 2A*4CH Max.2A RGB+CCT 12-24Vdc Max.48W 2A*5CH Max.2A 45 mm 195 mm 130 mm 150 mm WIFI controller LED strip Installation instructions 1. Use DC12-24V power supply. 2. Install the WIFI controller correctly. Use 3M tape to fix it 3. Please unfold the LED strip to avoid the overheat issues. Please connect the cables of LED strip with the right position on the controller. Test the APP to check if it can control the LED strip correctly. If everything goes well, just keep going. 4. Check and ensure the power supply, WIFI controller and LED strip are connected correctly. Attentions 1. Do not put any metal around the WIFI controller, which could blocked WiFi signal 2. Ensure power supply and controller are connected correctly. 3. The power supply output voltage should be same as LED strip working voltage. 4. Do not cover anything on the surface of power supply, WIFI controller and LED strip. 5. Ensure the connection is correct before powering. Log in / Register account number Open the Smart Life APP, sign up for a new account or log in with an existing account. 1. Please conrm that the phone and controller are in the same WIFI environment;

2. Please conrm that WIFI is in 2.4G signal mode;

3. If the WIFI signal is in 5G mode, please click "compatibility mode" in the upper right corner of the "conrm the light is ashing" page. 1. Preparation: Turn on the LED strip and enter the home of APP while ensure the WIFI signal is good and stable. 2. LED strip will flashing when turn on the power supply. Add all devices on the APP and enter adding lighting device interface, match LED strips. 3. If the LED strip is not flashing when turn on the power supply, long press the Reset button for more than 5 seconds. While LED strip flashing, enter the APP adding lighting device interface, match LED strips. 4. Select the Wi-Fi connected to the smart device, input the WiFI password, and then click "OK" to wait for the matching to succeed.(Make sure smart devices share the same WiFi) Product functions diagram 1:DC12-24V input connection port 2:Output connection port to connect to LED strip(4-6PIN female bracket/5PIN male PIN connector) 3: Function buttons:

Switch on Switch off Long press for more than 5 seconds to reset APP function introduction Click the interface to control it according to the specific mode of the specific LED strip.The following is public function introduction. Remote control: The LED strip can be controlled anywhere after the smart device is successfully connected. Timer function: Set the timer to turn on and turn off the LED strip. Intelligent scene: The system sets a variety of intelligent scenes, and different scenes correspond to different lighting atmospheres. Group: Group control is available (only for the same type of product). Family room management. Device Sharing: The device is shared with other user control devices in the home. Third party control In the Smart Life APP: Find more service in "Me" menu, click to enter voice service

(Alexa/ Google Assistant) and other services, click on the service you need. Connect to the third-party service device according to the operation guide. For any product and APP updating,please contact with customer service.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AUEPTYWMC3-25T10 LABEL AND LOCATION FCC ID: 2AUEPTYWMC3-25T10 Size: L2.0 cm*W0.5cm Label Location Material: Silk-screen Font color: Black Label color: White This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1

SHEN ZHEN CL LIGHTING TECHNOLOGY CO.,LTD Agent Authorization Company: SHEN ZHEN CL LIGHTING TECHNOLOGY CO.,LTD Address: Floor 4, Bldg.B, #1, 3rd Indl.Zone, Shiyan, Baoan, Shenzhen, China Product Name: WIFI Music Strip Light Kit Model Number(s): TYWMC3-25T10, TYWMC3-25T10, TYWMC3-23T1, TYWMC3-23T2, TYWMC3-23T3, TYWMC3-23T4, TYWMC3-23T5, TYWMC3-23T10, TYWMC3-24T1, TYWMC3-24T2, TYWMC3-24T3, TYWMC3-24T4, TYWMC3-24T5, TYWMC3-24T10, TYWMC3-25T1, TYWMC3-25T2, TYWMC3-25T3, TYWMC3-25T4, TYWMC3-25T5 Product Description: WIFI Music Strip Light Kit FCC ID: 2AUEPTYWMC3-25T10 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Cailan zhang Title:

CEO Date: 2020-09-18 Company: SHEN ZHEN CL LIGHTING TECHNOLOGY CO.,LTD

SHEN ZHEN CL LIGHTING TECHNOLOGY CO.,LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Dear Sir/Madam, We, SHEN ZHEN CL LIGHTING TECHNOLOGY CO.,LTD Hereby declares the following statement for FCC, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model:

Product Name: WIFI Music Strip Light Kit Model Number(s): TYWMC3-25T10, TYWMC3-25T10, TYWMC3-23T1, TYWMC3-23T2, TYWMC3-23T3, TYWMC3-23T4, TYWMC3-23T5, TYWMC3-23T10, TYWMC3-24T1, TYWMC3-24T2, TYWMC3-24T3, TYWMC3-24T4, TYWMC3-24T5, TYWMC3-24T10, TYWMC3-25T1, TYWMC3-25T2, TYWMC3-25T3, TYWMC3-25T4, TYWMC3-25T5 Sincerely, Signature:

Name:

Cailan zhang Title:

CEO Date: 2020-09-18 Company: SHEN ZHEN CL LIGHTING TECHNOLOGY CO.,LTD

SHEN ZHEN CL LIGHTING TECHNOLOGY CO.,LTD Floor 4, Bldg.B, #1, 3rd Indl.Zone, Shiyan, Baoan, Shenzhen, China Date: September 18, 2020 FCC ID: 2AUEPTYWMC3-25T10 Model Number: TYWMC3-25T10, TYWMC3-25T10, TYWMC3-23T1, TYWMC3-23T2, TYWMC3-23T3, TYWMC3-23T4, TYWMC3-23T5, TYWMC3-23T10, TYWMC3-24T1, TYWMC3-24T2, TYWMC3-24T3, TYWMC3-24T4, TYWMC3-24T5, TYWMC3-24T10, TYWMC3-25T1, TYWMC3-25T2, TYWMC3-25T3, TYWMC3-25T4, TYWMC3-25T5 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, SHEN ZHEN CL LIGHTING TECHNOLOGY CO.,LTD declare that this EUT (FCC ID: 2AUEPTYWMC3-25T10) doesnt have Ad Hoc mode function on non-US/Canada frequencies. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely,

(Signed) Name / Title: Cailan zhang / CEO Company: SHEN ZHEN CL LIGHTING TECHNOLOGY CO.,LTD Address: Floor 4, Bldg.B, #1, 3rd Indl.Zone, Shiyan, Baoan, Shenzhen, China Tel: 86-15218748584 Fax: 86-15218748584 E-mail: 309517179@qq.com

SHEN ZHEN CL LIGHTING TECHNOLOGY CO.,LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020-09-18 Subject; Request for Confidentiality FCC ID: 2AUEPTYWMC3-25T10 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

Schematic Diagram Block Diagram Operational Description External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Cailan zhang Title: CEO