Product Description Wireless interface Mic Lens Hard disk slot Automatic shooting indicator Manual shooting indicator Video recording indicator Live indicator WIFI mode switching
(reserved) Camera switch button / mode button Shooting button Tripod interface HDMI interface Network port
, Mic interface Power interface e GPS interface Instructions 1.Camera Power Supply
(1).The camera has a built-in battery and the battery lasts for about 2 hours.
(2).The power adapter or an external battery (Non-standard).can be used to charge and power the camera through the power interface. Aaa PUM Charging interface 2.Storage hard disk When the camera is placed in the forward, put the SSD in the hard disk extraction box and do not do this when the camera is upside down. Hard disk slot 3.Connection cable Plug the network cable into the camera's LAN port or connect to the network via WIFI 4.Boot Press and hold the power button for 3 seconds, the power button will flash quickly, and the camera buzzer will sound a short beep to complete the boot.
}; Camera switch button / mode button 5.The main lens The first display perspective in the panorama. Ss ie LI The main lens 6.Camera button operation Mode switching: The mode button and the power button are the same button, press the mode button to switch the camera mode. Manually shooting: In the shooting mode, shortly press the capture button to take a group of panoramic photos. Auto shooting: In the auto shooting mode, press the capture button to take a photo automatically, press the capture button again to stop taking the photo. Video recording: In video recording mode, press the shootingbutton to start recording video, press the shooting button again to stop recording. Live streaming: In push mode, cooperate with the computer controller to perform live streaming. oO Camera switch button / mode button Shooting button 7.Camera connected to PC or mobile controller The controller software can be connected to the camera via the network to perform parameter setting and shooting operations on the camera. 8.Camera connected to PC generator The Panorama generation software can connect to the camera through the network to generate a panoramic photo or video from the material in the camera. Specifications System Overview and Camera Specs Name PHIIMAX3D (PB341) 3602D Panoramic photo shooting: 360 2D Panoramic video shooting:
The highest level 8192*4096 (8K) Real - time stitching, The highest level 3840*1920@30fps (4K) Post- stitching. The highest level 8192*4096@30fps (8K) 360 3D panoramic photo shooting: 360 3 D panoramic video shooting:
The highest level 8192*4096 (8K) Post- stitching, the highest specifications can be achieved 6400*6400@30fps (6K) Lens: File format:
6* F 2.2 fisheye MP4 ( video ) JPG Body material: Protection level:
All aluminum alloy Fully sealed, fanless design, shockproof and dustproof Weight: Size :
~2.39Kg Diameter 200mm Source: Standard operating temperature:
Built-in Mic * 6 -10C~45C Storage support: Power and battery life:
SATA 3 (SSD ) 10200 mAh internal battery (ime of endurance about 140min) 12.6 V 6A power adapter Communication Interface: Live streaming support:
HDMI 2.0 interface Up to 15 frames 4K live streaming Gigabit RJ45 Ethernet interface 15 frames 4K panoramic 3D live streaming
(Wired control and data transmission) H .264 encoding Full VR platform support 2*2 External antenna high power WiFi
(AP Hot spot wireless connection) SDK & secondary development interface:
Camera data interface: photos, video files, video streams, gyroscope data Picture quality adjustment interface: ISO, white balance, exposure benefit, resolution, frame rate control Wired / WiFi control interface: Photo, video, push flow control FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in mobile(min20cm) exposure condition without restriction.