Optional Eartips To improve wearing experience, please select the best fit eartips to use. M S It is recommended to try Medium eartips as it's suitable for most people. The factory assembled earbuds are equipped with Medium eartips. How to pair earbuds with your phone Take out the earbuds from charging case, the earbuds will power on and pair to each other automatically. Then the left earbud indicator turns off and the earbuds enter into pairing mode. Activate your phone's BT and search for "abramtek E3"
and select. After initial setup, the earbuds will automatically reconnect to the last paired device. IMPORTANT: Please use the best fit eartips. The better the air tightness, the better the sound insulation and sound quality. Note: If the earbuds do not work properly, please put the earbuds into charging case for 2-3 seconds and then try again. FCC ID:2AGCAE3 Model Name:E3 True Wireless Earbuds ABRAMTEK E3
- User Manual -
Charging Case Battery Indicator White LED Light Right Earbud Left Earbud USB-C Charging Port Notes:
1.If the earbuds cannot hold a charge, please insert USB-C cable to charge the charging case. 2.Please put the earbuds into charging case if not used. Otherwise, the earbuds always stay on.
<Settings Bluetooth AVAILABLE DEVICES abramtek E3 How to use single earbud Support switch between left and right earbuds. You may listen to music with single left earbud or right earbud, with no need to repeat the pairing process. Power ON Take out the earbuds from charging case, the earbuds will power on automatically (White indicator flash 3 times, and then orange indicator light once). How to recharge the earbuds Put the earbuds into the charging compartment and make sure it fits the charging port contact receiver properly. When the earbuds are fully charged, the white indicator will turn off. How to recharge the battery case Insert USB-C cable to recharge the battery case. When the battery case is being charged, the white indicator turns on. When the battery case is fully charged, 4 white indicators light up. Function Points Power OFF Put the earbuds into the charging case, the earbuds will power off automatically (Orange indicator always on) Orange Light: Charging White Light: In-Use/Connected Indicator Tap Area Take Out Earbuds Answer Phone Calls When a phone call comes in, tap the right earbud twice (time interval 0.6s) and this will answer the call. After you finish your conversation, tap the right earbuds twice to hang up phone. Reject Phone Calls When a phone call comes in, tap the right earbud 3 times (time interval 0.6s) to reject the call. Play/Pause When playing music, tap the right earbud twice (time interval 0.6s) to pause and play the music. Previous Track/Next Track When playing music, tap the left earbud 3 times (time interval 0.6s) to switch to the previous track, tap the right earbud 3 times to switch to the next track. Voice Interaction In standby mode, tap the left earbud twice (time interval 0.6s) to activate your phone's voice assistant (for example, Siri). Product Parameters Model: E3 Bluetooth Version: 5.0 Bluetooth Distance: 10 meters in open area Charging Time: 3 hours Standby Time: 150 hours Playback Time: Over 6 hours Battery: Polymer li-ion battery Support Protocol: HFP/HSP/A2DP/AVRCP Earbuds Battery Capacity: 3.7V 60mAh Charging Case Battery Capacity: 3.7V 1200mAh Charging Case Input: 5V 800mA
(All technological information is subject to practical performance) FAQs What measures should be taken if signals are unstable?
1. Restart the earbuds. 2. Check the compatibility and call quality of your phone. 3. Check if the earbuds are too far away from your phone or there is any interference around. 4. Do not stay at the surroundings where signal reflection exists. What should I do if too much noise from the earbuds?
1. Check the noise control of your phone. 2. Check if the earbuds are too far away from your phone. 3. Check if there is any electromagnetic radiation around. What should I do if I cannot hear the voice from earbuds?
1. Check if the earbuds are muted. 2. Check if the earbuds are connected to your phone. 3. Check if the earbuds are too far away away from your phone or there is any interference around. WARRANTY AND SUPPORT Limited Warranty 1. If this product or any part thereof is proven to be defective by reason of faulty workmanship or defects in materials within 12 months of purchase, we will at our option repair or replace the product free of charge, on condition that the original invoice or sales receipt with the date of purchase, or stamp from the dealer is presented together with the defective unit. 2. The warranty does not cover product failures which have been caused by use of accessories or other peripheral devices that are not original Abramtek branded accessories intended for use with the product. 3. The warranty does not cover product failures caused by modifications, repairs and disassembly by any person who is not authorized by the manufacturer. 4. Any defective unit or part shall become property of the manufacturer. The warranty does not cover any damage caused by misuse, drop, hit or neglect. Abramtek Ltd. 2019, All rights reserved. ShenZhen Abramtek Technology Co., Ltd. Add: 5th Floor, Building 1, Yonghongfeng Industrial Park, Baiyunshan Village, Dalang Street, Longhua Town, Shenzhen, China 518109 Website: www.abramtek.com Email: support@abramtek.com FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.