FCC ID: 2AUDF-CQ12X Smart PTZ Battery Camera

Smart PTZ Battery Camera Operation Instruction FCC ID: 2AUDF-CQ12X Contents 1.Packing list---------------------------------------01 2.Product appearance---------------------------02 3.Quick start---------------------------------------04 4.Set up the camra--------------------------------06 5.Install the camera---------------------------------11 6.Share the camera---------------------------------14 7.Charge the camera------------------------------17 8.Indicator light status--------------------------18 9.Product specification------------------------18 10.Firmware upgrade -------------------------19 11.FCC warning-----------------------------------19 12.FAQ-------------------------------------------21 Packing list 1. Camera*1 2. Bracket*1 3. Mounting kit*1 4. USB charging cable *1 5. Operation instruction*1 6. Screw for bracket*1 01 Product appearance Wi-Fi antenna Infrared lamp White light Indicator light 02 Lens MIC Human body infrared sensor Micro-USB port Speaker Micro-SD card slot Reboot hole Power button 03 Quick start The smart battery camera supports battery-powered supply and AC-powered supply. 1. Download and install the App The wireless smart battery camera supports Android and iOS App. For your best experience, please scan the QR code below with your mobile phone, install the app, and follow the instruction to complete the user registration. Android Download App Store Download Download App Scan QR code or go to the link to download and install the Apphttps://www.vicohome.io/download/

04 2. Add the device Sign in to the App connect to Wi-Fi and add the device according to the prompts (please bring the device close to the router when configuring). 05 Set up the camera Click the "Add Camera Now" in the App and enter the Wi-Fi network name and password that you want the camera to connect. 06 To ensure a longer distance connection, the camera only supports the 2.4Ghz Wi-Fi with stronger wall penetration capability and does not support Wi-Fi for enterpriselevel authentication currently. Please ensure that the entered Wi-Fi meets the requirements. After completion, click "Continue"

to generate the QR code for pairing the camera. 07 2) After pressing the camera switch for 3 seconds, the camera will turn on. The camera will emit the scanning sound "Ding Dong Ding Dong" after it is turned on (if you do not hear it, please double click the power button). Power button 3) Take the lens of the camera facing the QR code generated on VicoHome about 20 cm (7 inches) until you hear a "Ding"

sound. about 7 inches (20cm) 08 4) After a while, the camera will give out a prompt sound of a successful connection. At this moment, please set the name for the device on the App and select the location you want to place the device. Click "Continue" to complete the pairing. 09 Possible problems with binding:

When you hear the "Wi-Fi Password Error", please check whether the Wi-Fi password you entered in the App is correct;

When you hear the "Authentication error", please ensure that your Wi-Fi network is not an enterprise-level network, and the device supports only the network with the security level below WPA-2;

When you hear the "Wi-Fi not found", please check whether you select or enter the correct Wi-Fi name, and place the device near the Wi-Fi router and ensure that the router is powered on. Please note that 5Ghz Wi-Fi cannot be searched by the device;

When you hear the "Retrieving IP timeout", it indicates that the number of devices connected to the router in your home is too many to connect more devices. Please remove some of the connected devices that are not commonly used or restart the router to clear the unconnected devices. You may need to contact the router administrator;

When you hear the "Cloud service connection fail", please check whether your router is connected properly to the external network. When you hear this error prompt,it is common on the condition of network disconnection or that the selected router in your home is a local area network server. Please ensure that the network connection is normal, and try to temporarily turn off the firewall to connect again. 10 Install the camera You can place the camera on a shelf or other surfaces to use, or you can install it on a wall to use.

(1) Select a good spot for your camera Select a good spot for your camera, please install the camera in a position where its view is not blocked and ensure that it is within the coverage of the Wi-Fi network. The PIR infrared sensor is more sensitive to movements across the camera's field of view than movements toward or away from the camera. 11 ommended Rec height About 6 ft For outdoor use, please install the camera upside down to maximize the waterproof performance and the human body infrared sensors effectivity.

(2) Install the bracket 1) Screw fixing:

Fix the camera to the desired location. You can directly place the camera on a flat surface or fix the bracket to the wall or ceiling by screws. 12 2) Fix the camera Put the camera up side down and then fix the camera to the bracket by a screw . 13 Share the camera When you want to let other family members or friends view the camera, you can use this feature. Only the admin user who is the first to add the camera is able to share the camera and manage the settings for the camera. The shared users have limited access rights.

(1) Steps for Admin User 1) Find the camera you want to share on the App Homepage , then tap the "Share" button. You can also tap the camera

"Camera Setting" icon, then tap the "Share" button;

14 2) Tap "Camera sharing", a QR code for sharing will be generated. 15

(2) Steps for Shared User For the family members or friends you want to share, find

"Add friend's camera" on the Homepage to enter the scan code page, then scan QR code generared on the admin's phone, then send the access request to the admin user. 16

(3) Steps for Admin User You will receive a confirmation notice, and you can complete sharing after agreeing. Charge the camera The App will remind you to charge your camera when the battery is low. Please use the Micro USB cable to plug into the 5V/1.5A charging adapter to charge the camera. During charging, the camera's indicator light is solid yellow, and when the camera is fully charged, the indicator light will turn into solid green. It will take 15 hours to fully charge the camera. 17 Indicator light status Mode Working mode Sleep mode Charging mode Fully charged mode Status Blue Off Yellow Green Product specification Item Specification Camera lens Field of view: 110 Image resolution Max. 1920 X 1080 Video bit rate Adaptive Storage media Micro SD card (Up to 128GB) Rotation Angle 355 pan, 90 tilt Battery capacity 9000mAh Adapter requirement 5V/1.5A Size(without bracket) 120.2101.1158.3mm 18 Firmware upgrade When you connect your camera through the App, it will prompt you if the latest firmware is available. You can also manually check the firmware version in the settings of the App. Please make sure that your camera is fully charged or connected to the power adapter before upgrading the firmware, please do not cut off the power supply during the upgrading. FCC warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference.

( 2 ) t h i s d e v i c e m u s t a c c e p t a n y i n t e r f e r e n c e received,including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 19 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, this equipment should be installed and operated with minimum distance between 20cm the radiator your body:

Use only the supplied antenna. 20 FAQ 1.Q:Camera permission management: How to invite family and friends to use my camera together?

A: Open the App and select your camera on the home page. Click the share button on the home page or the "Share" in the camera settings to enter the sharing page, and then click

"Invite " to generate a QR code. Your friends can now get some of the access rights by scanning the QR code in your phone. 2.Q:Why doesn't the Wi-Fi name appear when I connect to Wi-Fi?

A: On Apple devices with iOS13 and above, you need to turn on the "location permission" for the app in the system settings and change it to "allow when using."

3.Q:Will the camera show red lights when night vision is activated?

A: The built-in infrared lamp beads make the camera only show some dim red lights when night vision is activated, but the image quality is still clear under no light environment. 4.Q:What are the requirements for Wi-Fi?

A: Please use a 2.4GHz wireless network. The device does not support the 5GHz wireless network. Meanwhile, please set the Wi-Fi authentication method to WPA2-PSK or other lower level of security method. A password is required. 21 5.Q:How far should the camera be placed from the router?

A: After testing, the Wi-Fi connection distance can normally reach up to150 meters in the open area. However, the actual situation depends on the strength of Wi-Fi and its surrounding environment (thick walls, electromagnetic devices, large metal objects will all cause interference to the Wi-Fi signals). If the camera connection signal is weak or unstable, please place the camera as close to the router as possible. 6.Q:What is the maximum length of recording time?

A: If you set the duration as "Auto", when someone occurs in the view of the camera, it will start recording a video for up to 3 minutes. 7.Q:How to quickly view videos by category?

A: Click the icon in the upper left corner of the "Library"

page to start filtering videos by category. Select the category you want to see and then click Save to view the video playbacks. 8.Q:What should I do when the device is in malfunction?

A: Long press the power button for 3 seconds to restart it. If there is no response, you can remove the rubber plug at the button of the camera. Press the reboot hole with a pointed object to restart the camera. 22 V1.0

Appendix FCC ID Label Size for the label: 10mm X20mm FCCID:2AUDF-CQ12X TB-RF-074-1.0 Appendix ID Label Location ID LOCATION FCC ID:2AUDF-CQ12X TB-RF-074-1.0

Appendix FCC ID Label Size for the label: 10mm X20mm FCCID:2AUDF-CQ12X TB-RF-074-1.0 Appendix ID Label Location ID LOCATION FCC ID:2AUDF-CQ12X TB-RF-074-1.0

Shenzhen ADDX Innovation Technology co. ,LTD. NO.2902, Building 9A-1. Shenzhen Bay Technology and Ecological Park , Nanshan District, Shenzhen, China TEL: 18594279025 FAX: 0755-32914980 Date: Dec. 15, 2021 FCC ID: 2AUDF-CQ12X To whom it may concern:

Class II Permissive Change Letter We, the undersigned, hereby attest to the fact that we will apply the class II change. The hardware of this equipment is electrically identical with original, only the follow changes to the original but still compliance of relevant standard. There is only change of non-transmitter portions, Conducted Emissions &

Field Strength of Spurious Radiation testing was performed to demonstrate RF compliance Original Change to Replaced the charging IC. Sincerely Garry yang Shenzhen ADDX Innovation Technology co. ,LTD. Phone: 18594279025 Fax: 0755-32914980 Email: jyang1@addx.ai

Shenzhen ADDX Innovation Technology co. ,LTD. Add: NO.2902, Building 9A-1. Shenzhen Bay Technology and Ecological Park , Nanshan District, Shenzhen, China Date: 2021-12-15 FCC ID: 2AUDF-CQ12X Dear Sir/Madam, We, Shenzhen ADDX Innovation Technology co., LTD. Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model:

Product name: Smart PTZ Battery Camera Model no.: CQ1, D3, D3K, D4, D4K, D5, D6, X85, X89 Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

Garry yang Shenzhen ADDX Innovation Technology co. ,LTD. NO.2902, Building 9A-1. Shenzhen Bay Technology and Ecological Park , Nanshan District, Shenzhen, China 18594279025 0755-32914980 jyang1@addx.ai

Shenzhen ADDX Innovation Technology co. ,LTD. NO.2902, Building 9A-1. Shenzhen Bay Technology and Ecological Park , Nanshan District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

2021-12-15 We, Shenzhen ADDX Innovation Technology co. ,LTD. the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AUDF-CQ12X including the signing of all documents related to these matters. effect as acts of our own. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title Garry yang /

Company:

Address:

Shenzhen ADDX Innovation Technology co. ,LTD. NO.2902, Building 9A-1. Shenzhen Bay Technology and Ecological Park , Nanshan District, Shenzhen, China 18594279025 0755-32914980 jyang1@addx.ai Phone:

Fax:

E-Mail:

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2021-12-2>

Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2AUDF-CQ12X Model name CQ1 For the product stated above, we request that the following information be held confidential;

Exhibits Short-Term Confidentiality Long-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title Garry yang/

Company:

Address:

Shenzhen ADDX Innovation Technology co. ,LTD. NO.2902, Building 9A-1. Shenzhen Bay, Technology and Ecological Park, Nanshan District, shenzhen, China 18594279025 0755-32914980 jyang1@addx.ai Phone:

Fax:

E-Mail:

Shenzhen ADDX Innovation Technology co. ,LTD. NO.2902, Building 9A-1. Shenzhen Bay, Technology and Ecological Park , Nanshan District,shenzhen,China Date: 2021-12-2 FCC ID: 2AUDF-CQ12X Model Number: CQ1 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, Shenzhen ADDX Innovation Technology co. We,

(FCC ID:2AUDF-CQ12X) doesnt have Ad Hoc mode function on non-US/Canada frequencies. In addition. The frequency selection feature is disabled by firmware for devices marked used in North to the US/Canada. For DTS part of this device, only channels 1-11 will be America, Country code selection is disabled. declare that this EUT

,LTD. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Name/Title Garry yang/

Company:

Address:

Shenzhen ADDX Innovation Technology co. ,LTD. NO.2902, Building 9A-1. Shenzhen Bay, Technology and Ecological Park , Nanshan District, shenzhen, China 18594279025 0755-32914980 jyang1@addx.ai Phone:

Fax:

E-Mail: