FCC ID: 2AUDF-CG12Y Wireless Smart Battery Camera

Wireless Smart Battery Camera Operation Instruction v1.2 5.Power on/off and network configuration Contents 1.Packing list 2.Product appearance 3.Quick start 4.Install the camera 6.Charge the camera 7.Indicator light status 8.Product specification 9.Firmware update 10. FCC warning 11.FAQ 01 02 05 07 09 10 10 11 12 12 12 Packing list 1. Camera*1 2. Bracket*1 3. 3M Adhesive tape*1 4. Mounting kit*1 5. USB charging cable *1 6. Operation instruction*1 Product appearance Microphone Infrared lamp Back shell open button Ambient light sensor White light Lens Indicator light Human body infrared sensor Threaded bracket interface Strong magnetic chuck Speaker Press buttons on both sides, and pull out the back cover. Power button Reset button Micro-USB port Micro-SD card slot Quick start The wireless smart battery camera supports battery-powered supply and AC-powered supply. 1. Download and install the App The wireless smart battery camera supports Android and iOS App. For your best experience, please scan the QR code below,or search Vicoo in the App Store to download and install the App, and follow the instruction to complete the user registration. 2. Add the device Sign in to Vicoo Appconnect to Wi-Fi and add the device according to the prompts (please bring the device close to the router when configuring). Vicoo App Install the camera You can place the camera on a shelf or other surfaces to use, or you can install it on a wall to use.

(1) Select a good spot for your camera Please install the camera in a position where its view is not blocked and ensure that it is within the coverage of the Wi-Fi network.

(2) Install the bracket 1).3M adhesive fixing:

Remove the protective film on one side of the 3M adhesive and stick it to the mounting surface of the bracket. Then remove the protective film on the other side to fix the mounting bracket in the installation position. (The installation surface must be clean, smooth and dry. It is not suitable for uneven wood, leather and stucco walls. Please press and hold the bracket on the installation position for 3 minutes to achieve the best gluing performance) 2).Screw fixing:

Use the drilling tool to punch holes on the wall according to the hole distance of the base. It is recommended to mark the holes on the wall with a pencil before drilling. Screw the expansion nut into the holes on the wall, and then connect the bracket to the expansion nut with screws to complete the fixing.

(3) Adjust the angle Attach the camera to the magnetic bracket, then adjust the surveillance angle. Charge the camera Vicoo App will remind you to charge your camera when the battery is low. Please use the Micro-USB cable to plug into the 5V/1.5A charging adapter to charge the camera. During charging, the camera's indicator light is solid yellow, and when the camera is fully charged, the indicator light will turn into solid green. It will take 8 hours to fully charge the camera. When the battery is too low, the indicator light will blink red quicklywith the voice prompting "Low battery, shutting down". If the charger is not connected, the camera will power off automatically. Power on/off and network configuration Indicator light status Long press the power button for 2s to power on/off the device. Double click the power button to enter the network configuration mode after the prompt tone. When connecting the camera for the first time, use the Vicoo App and follow the instruction to configure the camera network. Mode Working mode Sleep mode Status Blue Off Charging mode Yellow Fully charged mode Green Product specification Item Specification Camera lens Field of view: 110 Image resolution Max. 1920 X 1080 Video bit rate Adaptive Storage media Micro SD card (Up to 128GB) Battery capacity 5200mAh Adapter requirement 5V/1.5A Size 84*62*96(mm*mm*mm)

* Up to six months in standby mode Firmware upgrade When you connect your camera through the Vicoo App, it will prompt you if the latest firmware is available. You can also manually check the firmware upgrade in the settings of the App. Please make sure that your camera is fully charged or connected to the power adapter before upgrading the firmware, please do not cut off the power supply during the upgrading. FCC warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. FAQ 1.Q:Camera permission management: How to invite family and friends to use my camera together?

A:Open the Vicoo App and select your camera in the home page. Click the share button on the home page or the "Share" in the camera settings to enter the sharing page, and then click "Invite friends" to generate a QR code. Your friends can now get some of the access rights by scanning the QR code in your phone. 2.Q:Why doesn't the Wi-Fi name appear when I connect to Wi-Fi?

A:On Apple devices with iOS13 and above, you need to turn on the "location permission" for the app in the system settings and change it to "allow when using."

3.Q:Will the camera show red lights when night vision is activated?

6.Q:What is the maximum length of recording time?

A:The built-in infrared lamp beads make the camera only show some dim red lights when night vision is activated, but the image quality is still clear under no light environment. A:You can choose the recording time in the app. The camera can record for a fixed time or automode, which depending on whether there is a person. The maximum length of a video is 3 minutes. 4.Q:What are the requirements for Wi-Fi?

7.Q:How to quickly view videos by category?

A:Please use a 2.4GHz wireless network. The device does not support the 5GHz wireless network. Meanwhile, please set the Wi-Fi authentication method to WPA2-PSK or other lower level of security method. A password is required. 5.Q:How far should the camera be placed from the router?

A:After testing, the Wi-Fi connection distance can normally reach up to 150 meters in the open area. However, the actual situation depends on the strength of Wi-Fi and its surrounding environment (thick walls, electromagnetic devices, large metal objects will all cause interference to the Wi-Fi signals). If the camera connection signal is weak or unstable, please place the camera as close to the router as possible. A:Click the icon in the upper left corner of the "Library"

page to start the search filters. Select the search settings and then click save to view the video playback. 8.Q:What should I do when the device is in malfunction?

A:Long press the power button to restart the camera. If there is no response, you can open the back shell of the camera, and then open the rubber plug on the side then press the reset button with a pointed object to force the power off, then long press the power button to restart the camera.

Appendix FCC ID Label Size for the label: 20mm X10mm FCC ID: 2AUDF-CG12Y TB-RF-074-1.0 Appendix ID Label Location ID LOCATION FCC ID: 2AUDF-CG12Y TB-RF-074-1.0

Shenzhen ADDX Innovation Technology co. ,LTD. Add: NO.2902, Building 94-1. Shenzhen Bay Technology and Ecological Park , Nanshan District, shenzhen, China Date: 2022-6-28 FCC ID: 2AUDF-CG12Y Dear Sir/Madam, We, Shenzhen ADDX Innovation Technology co. LTD. Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model. Product name: Wireless Smart Battery Camera Model no.: CG1, CG1NF, CG1NS, CG1NA Sincerely, Gow, Sef Name/Title : Garry yang/

Company: Shenzhen ADDX Innovation Technology co. ,LTD. Address: NO.2902, Building 9A-1. Shenzhen Bay Technology and Ecological Park , Nanshan District, shenzhen, China Phone: 18594279025 Fax: 0755-32914980 E-Mail: jyangl@addx.ai

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2022-6-28>

Pursuant to Paragraphs 0.457 and 0.459 of the Commission's Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

cG1 Model name For the product stated above, we request that the following information be held confidential;

Long-Term Exhibits Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days Extemal Photos Internal Photos. Block Diagram Schematics Test Setup Photos:

User's Manual Parts List Tune Up moOooARRoo Operational Descriptions:

Dopooo0ol The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Garry yang/

Shenzhen ADDX Innovation Technology co. LTD. NO.2902, Building 9A-1. Shenzhen Bay Technology and Ecological Park , Nanshan District, shenzhen, China Phone: 18594279025 Fax: 0755-32914980 E-Mail: jyangl@addx.ai

Shenzhen ADDX Innovation Technology co. ,LTD. NO.2902, Building 9A-1. Shenzhen Bay Technology and Ecological Park , Nanshan District, shenzhen, China Date: 2022-6-28 FCC ID: 2AUDE-CG12Y Model Number: CG1 To:

Federal Communications Commission Authorization and Evaluation Di 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Shenzhen ADDX Innovation Technology co. ,LTD., declare that this EUT (FCC ID:

2AUDF-CG12Y) doesnt have Ad Hoc mode function on non-US/Canada frequencies, In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Goud Sef Name/Title: Garry yang/

Company: Shenzhen ADDX Innovation Technology co. ,LTD. Address: NO.2902, Building 9A-1. Shenzhen Bay Technology and Ecological Park , Nanshan District, shenzhen, China Phone: 18594279025 Fax 0755-32914980 E-mail: jyangl@addx.ai

Shenzhen ADDX Innovation Technology co. LTD. NO.2902, Building 9-1. Shenzhen Bay Technology and Ecological Park , Nanshan District, shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2022-6-28 To whom it may concer:

We, the undersigned, hereby authorize Eurofins Product Service GmbH to act.on our behaffin all matters relating to applications for equipment authorization FCC ID: 2AUDF-CG12Y including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Goud Sef Name/Title: Garry yang/

Company: Shenzhen ADDX Innovation Technology co. ,LTD. Address: NO..2902, Building 9A-1. Shenzhen Bay Technology and Ecological Park , Nanshan District, shenzhen, China Phone: 18594279025, Fax: 0755-32914980 E-Mail: jyang]@addx.ai