ESP-15FDatasheetV1.0 ESP-15FDatasheet VersionV1.0 Copyright 2019 Co pyrigh t 2019 ShenzhenAi-ThinkerTech nologyCo.,LtdAllRightsReserved 1 13 ESP-15FDatasheetV1.0 Disclaimerandcopyrightnotice Theinformationinthisarticle,includingtheURLaddressforreference,issubjecttochangewithoutprior notice.TheDocumentationisprovided"asis"withoutanywarranty,includinganywarrantiesof merchantability,fitnessforaparticularpurpose,ornon-infringement,andanywarrantiesmentionedinthe proposal,specificationorsample.Thisdocumentisnotresponsibleforanyinfringementofanypatentrights arisingoutoftheuseoftheinformationinthisdocument.Nolicense,expressorimplied,byestoppelor otherwise,isherebygranted. ThetestdataobtainedinthispaperareallobtainedbyAi-Thinkerlaboratory,andtheactualresultsmaybe slightlydifferent.TheWi-FialliancemembershipmarkisownedbytheWiFialliance. Alltrademarknames,trademarksandregisteredtrademarksmentionedhereinarethepropertyoftheir respectiveownersandareherebydeclared. Thefinalinterpretationrightisownedby ShenzhenAi-ThinkerTechnologyCo.,Ltd. Note Thecontentsofthismanualmaybechangedduetotheversionupgradeoftheproductorotherreasons. ShenzhenAi-ThinkerTechnologyCo.,Ltd.reservestherighttomodifythecontentsofthismanualwithout anynotice.Thismanualisonlyusedasaguide,andShenzhenAi-ThinkerTechnologyCo.,Ltd.makesevery efforttoprovideaccurateinformationinthismanual,butShenzhenAi-ThinkerTechnologyCo.,Ltd.does notensurethatthecontentsofthemanualarecompletelytrue,allstatementsinthismanual,Allstatements andinformationinthismanual.andtherecommendationsdonotconstituteforanywarranty,expressor implied. Co pyrigh t 2019 ShenzhenAi-ThinkerTech nologyCo.,LtdAllRightsReserved 2 13 ChangeHistoryofRevision ESP-15FDatasheetV1.0 Version Date ContentsofRevisionChange Compilation Verify V0.9 V1.0 2016.10.25Initialrelease 2019.11.15Dataupdate YangXiaofei XieYiji Co pyrigh t 2019 ShenzhenAi-ThinkerTech nologyCo.,LtdAllRightsReserved 3 13 ESP-15FDatasheetV1.0 Contents 1 ProductOverv iew.......................................................................................................................................5 2 Electrical Parameters ................................................................................................................................8 3 Appearancesi ze.......................................................................................................................................10 4 PinDefi nition...........................................................................................................................................11 5 Schematics................................................................................................................................................12 6 Design Guidelines....................................................................................................................................13 7 ReflowProfi le..........................................................................................................................................15 8 PackagingIn formation.............................................................................................................................16 9 Contactus.................................................................. ..............................................................................16 Co pyrigh t 2019 ShenzhenAi-ThinkerTech nologyCo.,LtdAllRightsReserved 4 13 ESP-15FDatasheetV1.0 1 Product overview TheES P-15FWi FimodulewasdevelopedbyAi-T hinkerTe chnology.Th ecorep rocessor ofthemodule ESP8266integra testheindustry-l eadingTe nsilicaL1 06ultra-l ow-power32-bit micro MCUin asm aller packagewith16-bitre ducedmode.Th emainfre quencysu pports80MHzand160MHz,su pports RTOS, andintegrates Wi-Fi MAC/ BB / RF / PA/ LNA. TheES P-15FWi Fimodulesu pportsthest andard IEEE802.11 b/g/npro tocol, acomplete TCP/IP protocol stack.Users canuse this module to addnetwork ingcapab ilities to existing devicesor tob uildse paratenetworkcontrollers . TheES P8266is ahigh-p erformancewire less SOCthatoffers maximumutilityatthelowest costan d unlimitedpossi bilitiesfo remb eddingWi Fi functionalityintoothersyst ems. ESP8266hasacompleteandself-containedWi-Finetworkfunction,whichcanbeusedindependentlyorrun asaslaveonotherhostMCUs.WhenESP8266isappliedindependently,itcanbestarteddirectlyfrom externalflash.Thebuilt-incachememoryhelpsimprovesystemperformanceandoptimizesthestorage system. AnothercaseisthatESP8266canbeusedasaWi-FiadapteronlythroughSPI/SDIOinterfaceorUART interface,andcanbeappliedtoanymicrocontroller-baseddesign. ESP8266'spowerfulon-chipprocessingandstoragecapabilitiesmakeitpossibletointegratesensorsand otherapplication-specificequipmentthroughtheGPIOport,greatlyreducingthecostofearlydevelopment. Copyrigh t 2019 ShenzhenAi-ThinkerTech nologyCo.,LtdAllRightsReserved 5 13 ESP-15FDatasheetV1.0 Features RTOS n Complete802.11b/g/nWi-FiSoCmodule n ThecoreisTensilicaL106lowpower32-bitMCU,frequencysupports80MHzand160MHz,supports n Built-in10-bithigh-precisionADC n OnlysupportUARTinterface n DIP-8packageforeasywelding n IntegratedWi-FiMAC /BB /RF/PA/LNA n UARTbaudspeedupto4Mbps n EmbeddedLwipprotocolstack n SupportSTA/AP/STA+APoperationmode n Supportmultiplesleepmodes,deepsleepcurrentaslowas20uA n SmartConfig(APP)/AirKiss(WeChat)supportforAndroidandIOS n Supportseriallocalupgradeandremotefirmwareupgrade(FOTA) n GeneralATcommandscanbeusedeasyandquickly n Supportforseconddevelopment,integrationofWindows Linuxdevelopmentenvironment Copyrigh t 2019 ShenzhenAi-ThinkerTech nologyCo.,LtdAllRightsReserved 6 13 ESP-15FDatasheetV1.0 Parameters Model ESP-15F Package DIP-8 Figure1MainParameter Size 41.3*24.1*6.6(0.2)MML*W*HHeightissubjecttopinheader Antenna FPCB Antenna Frequency Range Operating Temperature Storage Environment Powersupply range 2402 ~ 2480MHz
-20 ~70
-40 ~125 , <90%RH Voltage: 5VCurrent>800mA Interface UART IO 3 UARTBaut Support110 ~4608000bps default:115200bps Security WEP/WPA-PSK/WPA2-PSK SPIFlash Default:32Mbit Copyrigh t 2019 ShenzhenAi-ThinkerTech nologyCo.,LtdAllRightsReserved 7 13 ESP-15FDatasheetV1.0 2 Electricalpa rameter ElectricalCharacteristics Storage temperature VIL/VIH I/O VOL/VOH IMAX
PowerConsumption Parameter Symbol Min Typ Max Unit VDD 4.75 5.0 5.25
-0.3/0.75VIO 0.25VIO/3.6 N/0.8VIO
0.1VIO/N 12
The following powerconsumpt ion datawereobt ained from the testswitha3.3V pow er supply and avol tagest abilizer,in25 Cambi ent temperature. n Allmeasurementsaredone n Alldat a are based on 90%dut y cycleandm easuredi n continuoust ransmissionm ode. att he antennai nterface withoutt he SAWf ilter. Mode Min Typ Max Unit Tx802.11b,CCK11Mbps,POUT=+17dBm
Tx802.11g,OFDM 54Mbps, POUT
=+15dBm Tx 802.11n, MCS7,POUT=+13dBm Rx802.11b,1024byt es packetlength,
-80dBm Rx802.11g,1024byt es packetlength,
-70dBm Rx802.11n,1024byt es packetlength,
-65dBm Modem-Sleep Light-Sleep Deep-Sleep PowerO ff 170 140 120 50 56 56 20 2 20 0.5
V V V mA mA mA mA mA mA mA mA mA uA uA Copyrigh t 2019 ShenzhenAi-ThinkerTech nologyCo.,LtdAllRightsReserved 8 13 ESP-15FDatasheetV1.0 Note n Modem-sleepisusedwhensuc happlicatio nsasPWMorI2Srequire theCPUtobeworking.Incases whereWi-Ficonnectivityismaintainedanddatatransmissionisnotrequired,theWi-FiModemcircuit canbeshutdowntosavepower, accordingto802.11standards(suchasU-APSD).Forexample,in DTIM3,whenESP8266EXsleepsfor300msandwakesupfor3mstoreceiveBeaconpackagesfrom AP,theoverallaveragecurrentconsumptionisabout20mA. n DuringLight-Sleep,theCPUmaybesuspendedinapplicationslikeWi-Fiswitch.Withoutdata transmission,theWi-FiModemcircuitcanbeturnedoffandCPUsuspendedtosavepoweraccording to the802.11standard(U-APSD). E.g.inDTIM3,tomaintainasleep300ms-wake3mscycletoreceiveAP currentisabout0.9mA. s Beaconpackages,the n Deep-SleepdoesnotrequireWi-Ficonnectiontobemaintained.Forapplicationwithlongtimelags betweendatatransmission,e.g. atemperaturesensorthatchecksthetemperature andwakinguptoconnecttotheAP(taking about0.3~1s),theoverallavera every100s,sleep300s gecurrentislessthan1mA. 3 Appearancesize Copyrigh t 2019 ShenzhenAi-ThinkerTech nologyCo.,LtdAllRightsReserved 9 13 ESP-15FDatasheetV1.0 Copyrigh t 2019 ShenzhenAi-ThinkerTech nologyCo.,LtdAllRightsReserved 10 13 4 Pindefinition ESP-15Fhas 16 interfacesAsthepindiag ram,thepinfu nction definitiontableisth einterfa cedefi nition. ESP-15FDatasheetV1.0 ESP-15F Pindi agram Table Pinf unction definition No. Name Function RST Reset, activelow ADC A/Dconversion Inputvoltagerange0~1V thevaluerangeis0~1024. EN ChipEnabledPin,ActiveHigh IO16 ConnectwitRSTpintowakeupDeepSleep IO14 HSPI_CLK/IR_T/I2C_CLK/I2SI_WS IO12 HSPI_MISO IO13 HSPI_MOSI/UART0_CTS VCC 3.3V outputcurrentofexternalpowersupplyisrecommendedover 500mA GND Ground IO15 HSPI_CS/U0_RTS/I2SO_BCK U1_TXD/I2C_SDA/I2SO_WS IO2 IO0 IO4 IO5 GPIO4 IR_R GPIO0;downloadmode:externalpulllow,runningmode:floatingor externalpullhigh 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Copyrigh t 2019 ShenzhenAi-ThinkerTech nologyCo.,LtdAllRightsReserved 11 13 15 16 RX TX RXreceive TXtransmit ESP-15FDatasheetV1.0 TableDescriptionoftheESPseriesmodulebootmode Mode CH_PD(EN) RST GPIO15 GPIO0 GPIO2 TXD0 Download mode Runningmode High High High High Low Low Low High High High High High NoteSomeofthepins insidet hemodulehadbeenpulleduporpulleddown Pleaserefertotheschematic diagram. 5 Schematics Copyrigh t 2019 ShenzhenAi-ThinkerTech nologyCo.,LtdAllRightsReserved 12 13 ESP-15FDatasheetV1.0 OEM/Integrators Installation Manual Important Notice to OEM integrators 1. This module is limited to OEM installation ONLY. 2. This module is limited to installation in mobile or fixed applications, according to Part 2.1091(b). 3. The separate approval is required for all other operating configurations, including portable 4. configurations with respect to Part 2.1093 and different antenna configurations. For FCC Part 15.31 (h) and (k): The host manufacturer is responsible for additional testing to verify compliance as a composite system. When testing the host device for compliance with Part 15 Subpart B, the host manufacturer is required to show compliance with Part 15 Subpart B while the transmitter module(s) are installed and operating. The modules should be transmitting and the evaluation should confirm that the module's intentional emissions are compliant (i.e. fundamental and out of band emissions). The host manufacturer must verify that there are no additional unintentional emissions other than what is permitted in Part 15 Subpart B or emissions are complaint with the transmitter(s) rule(s). The Grantee will provide guidance to the host manufacturer for Part 15 B requirements if needed. End Product Labeling When the module is installed in the host device, the FCC/IC ID label must be visible through a window on the final device or it must be visible when an access panel, door or cover is easily re-moved. If not, a second label must be placed on the outside of the final device that contains the following text: Contains FCC ID: 2ATPO-ESP-15F The FCC ID can be used only when all FCC compliance requirements are met. In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC/IC authorization is no longer considered valid and the FCC ID/IC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC/IC authorization. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. Copyrigh t 2019 ShenzhenAi-ThinkerTech nologyCo.,LtdAllRightsReserved 13 13 FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. FCC ID: 2ATPO-ESP-15F