3 in 1 Bluetooth Audio Transmitter/Receiver Adapter Model: ZF-360A User Manual Dear friends, thanks for choosing our products. In order to better use the functions of this product, please read this user manual before use. Indicator light
(Blue: RX;Red: TX) Next track(Press) volume + (Press&hold) Power ON / OFF
(Press&hold >3s) Pause / Resume music
(Press) AUX for TX AUX for RX Micro USB charging port Whats Included 1x Bluetooth Transceiver 1x Micro USB Data Cable 1x 3.5mm Audio Cable 1x User Manual Transmitter Mode 1Turn on / off Red indicator light TX RX X R X T Long press for 3 seconds Toggle to TX
TX RX
Red light flashes slowly
(reconnecting state) Red light flashes quickly
(searching status) Red light is always on
(pairing is successful) After power on, the transceiver will automatically connect to
the last connected device. If the connection is unsuccessful, it will enter the searching status. Connecting to another device, please turn off the Bluetooth of the connected device first, or press and hold "+" "-" buttons at the same time to enter the searching status. The transceiver will search for a new pairing. Can't connect? Long press the power button for 8 seconds to clear the pairing record of the transceiver. Restart and make sure that the distance between the transceiver and the Bluetooth device is not more than 1 meter before trying to pair. If there is no device access after turning on, the transceiver will automatically shut down in 5 minutes. 2Pairing with your Bluetooth device 3Connect with audio source devices 1) With the 3.5mm audio cable RX / TX Mode switching Previous track(Press) volume - (Press&hold) For wireless headsets: Make sure that the headset is waiting for pairing (refer to the manual of the headset for details).
* For AirPods: Put AirPods in the charging compartment. Open the cover, then press and hold the button on the back of the charging compartment until the indicator light flashes white. Turn on the Bluetooth headset 2With the data cable 2Pairing with your Bluetooth device 3Connect with audio devices TX RX
USB-A USB-A TX RX
Micro-USB Game console USB-A NS Dock Computer BT ON Bluetooth Headset Bluetooth Speaker ZF-360 Connected Mobile phone MP4 Tablet Notebook Smart TV Wired Earphone TX RX TX RX
Stereo
Computer Speaker Wired Headphone Plug the 3.5mm audio cable of the wired headset or wired speaker into the audio interface marked RX on the Bluetooth transceiver. Button "+": Previous/Press once; Volume up/Long press Button "-": Next/Press once; Volume down/Long press Button " " : Play or Pause/Press once (only for music player)
*Note: The "+" "-" button cannot control the volume of the computer system. Turn on the Bluetooth of the mobile phone or other Bluetooth device, searching for the device named "ZF-360" to connect. Blue light flashes slowly
(reconnecting state) Blue light flashes quickly
(searching status) Blue light is always on
(pairing is successful) TX RX
After power on, the transceiver will automatically connect to the last connected device. If the connection is unsuccessful, it will enter the searching status. Connecting to another device, please turn off the Bluetooth of Charging the connected device first, or press and hold "+" "-" buttons at the same time to enter the searching status. The transceiver will search for a new pairing. Can't connect? Long press the power button for 8 seconds to clear the pairing record of the transceiver. Restart and make sure that the distance between the transceiver and the Bluetooth device is not more than 1 meter before trying to pair. TX Red light is always on
(charging) Red light is off
(full charge) RX
TX RX
Plug one end of the data cable into the charging port of the transceiver, the other end into PC, PS4, Switch dock and other devices that support USB audio output.Some USB ports only support charging, Not for audio transmission. Receiver mode 1Turn on / off Blue indicator light Long press for 3 seconds Toggle to RX X R X T TX RX
If there is no device access after turning on, the transceiver will automatically shut down in 5 minutes. Bluetooth Headset Projector MP3 TV TX RX
TX RX
Plug one end of the 3.5mm audio cable into the audio interface
(marked TX) on the transceiver, and the other end into the
Radio Bluetooth Speaker AUX interface on the TV or other equipment. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.