FCC ID: 2APQD-AD03 Wireless charger

FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.

ru 90200 1 iliuley oho 0 70 80 9010040

a tk vertu HVPET TTT PET PTET TTY TAY r \

eS RL f 1 i

[TFT m TMT TN CE A LL W OL 02 OE Ob 0S 09-02 08 06 QOLO! 92 0 Ob OS 09 92 08. 06 QQzOI wy

% 02 O OF 0S 09 OL 08 06 00+c1 oz o ov os 09 92 08 06 00Zo1 oz o oF OS 09 0 aan Hilti bi HH ne litt ti iiituilunluilinl LTH stiltisitei tinea viel ui tii aaa o o So ee ve

(vo)

LT?)

<=) a oS

So N a

a )

f=) o

(=) oO. S.

[) ww

Csr]

So N Re

Shenzhen Aodehong Electronic Technology Co.,Ltd 5th Floor, Elegant Industrial Park, No.8 Liuhe Road, Liuyue,Henggang Street, Longgang District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-1-29 To whom it may concern:

We, Shenzhen Aodehong Electronic Technology Co.,Ltd, hereby certify that the equipment for which authorization is sought (FCC ID: 2APQD-ADO3) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www foc. gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.914(b) and (4)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 DO1 Sincerely, Signature Tina Fang 3 Manager Shenzhen Aodehong Electronic Technology Co.,Ltd

Shenzhen Aodehong Electronic Technology Co.,Ltd Add: 5th Floor, Elegant Industrial Park, No.8 Liuhe Road, Liuyue,Henggang Street, Longgang District, Shenzhen, China Date: 2024-1-29 FCC ID: 2APQD-AD03 Dear Sir/Madam, We, Shenzhen Aodehong Electronic Technology Co.,Ltd Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model. Product name: Wireless charger Model no.: ADO3, S21, S5, S6, F20 Sincerely, Name/Title: Tina Fang/Manager Company: Shenzhen Aodehong Electronic Technology Co.,Ltd Address: 5th Floor, Elegant Industrial Park, No.8 Liuhe Road, Liuyue,Henggang Street, Longgang District, Shenzhen, China Phone: 13924643299 Fax: '86-0755-89395800 E-Mail: tina@aodehong.cn

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2024-1-29>

Pursuant to Paragraphs 0.457 and 0.459 of the Commission's Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID Model name 2APQD-ADO3 ADO3 For the product stated above, we request that the following information be held confidential;

Long-Term Exhibits Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos, Block Diagram Schematics Test Setup Photos User's Manual Parts List Tune Up OOOO RRoO) Operational Descriptions. Dopooo8o5) The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title: Tina Fang/Manager Company: Shenzhen Aodehong Electronic Technology Co,Ltd Address: 5th Floor, Elegant Industrial Park, No& Liuhe Road, Liuyue,Henggang Street, Longgang District, Shenzhen, China Phone: 13924643299 Fax: 86-0755-89395800 E-Mail: tina@aodehong.cn

Shenzhen Aodehong Electronic Technology Co.,Ltd Sth Floor, Elegant Industrial Park, No.8 Liuhe Road, Liuyue,Henggang Street, Longgang District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-1-29 To whom it may concern:

We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behaffin all matters relating to applications for equipment authorization FCC ID: 2APQD-AD03 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website wwweurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 Sincerely, Name/Title: Tina Fang/Manager Company: Shenzhen Aodehong Electronic Technology Co.,Ltd Address: 5th Floor, Elegant Industrial Park, No.8 Liuhe Road, LiuyueHenggang Street, Longgang District, Shenzhen, China Phone: 13924643299 Fax: '86-0755-89395800 E-Mail: tina@aodehong.cn

Shenzhen Aodehong Electronic Technology Co.,Ltd Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 1/27/24 Shenzhen Aodehong Electronic Technology Co.,Ltd acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2APQD-AD03):

Name and company of U.S. agent:

Tim Payne, FCC US Agent, LLC Physical U.S. address of agent:

3722 Illinois Avenue, Saint Charles, IL, 60174, USA FRN of U.S. agent:

0033402884 Email address of U.S. agent:

Support@FCCUSAgent.com FCC US Agent, LLC acknowledges their obligation to accept service of process on behalf of Shenzhen Aodehong Electronic Technology Co.,Ltd. Shenzhen Aodehong Electronic Technology Co.,Ltd with the FRN 0027497569 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature

[Tina Fang]

[Manager]

[Shenzhen Aodehong Electronic Technology Co.,Ltd]

Signature Tim Payne Manager FCC US Agent, LLC 5 0 V

, U

) 7

) d

1 1 9

. 2 _ t n e g A _ S U

l e d o m

_ 8 4