all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User manual | Users Manual | 847.68 KiB | March 26 2024 | |||
1 |
|
Internal Photos | Internal Photos | 3.47 MiB | March 26 2024 | |||
1 |
|
External Photos | External Photos | 2.55 MiB | March 26 2024 | |||
1 |
|
label and location | ID Label/Location Info | 663.40 KiB | March 26 2024 | |||
1 |
|
ANT Report | Cover Letter(s) | 695.27 KiB | March 26 2024 | |||
1 | BLOK | Block Diagram | March 26 2024 | confidential | ||||
1 |
|
FCC Short & Long Term Confidentiality Request | Cover Letter(s) | 84.29 KiB | March 26 2024 | |||
1 | OPS | Operational Description | March 26 2024 | confidential | ||||
1 |
|
RF Exposure Info | RF Exposure Info | 97.34 KiB | March 26 2024 | |||
1 | SCH | Schematics | March 26 2024 | confidential | ||||
1 |
|
TTest Setup Photos | Test Setup Photos | 1.84 MiB | March 26 2024 | |||
1 |
|
USA agent | Attestation Statements | 78.58 KiB | March 26 2024 | |||
1 |
|
cover letter | Attestation Statements | 107.74 KiB | March 26 2024 | |||
1 |
|
test Report | Test Report | 1.89 MiB | March 26 2024 |
1 | User manual | Users Manual | 847.68 KiB | March 26 2024 |
Instruction Manual Infrared Thermometer Model:AOJ-20Y Released date:2023-04 Version of manual:A0 1 Notice Contents Dear user, thank you for purchasing our Infrared Thermometer. Unpacking and Inspection For proper use of this product, please read the Instruction Manual carefully before use and operate the thermometer according to the instructions. Packing List Safety Precautions Symbols and Descriptions Before using this product, please be sure to read and follow the Common Knowledge of Human Body Temperature Safety Precautions. Please keep the Instruction Manual in a safe place for future reference. Product Introduction Product Features Main Structure Display Description The Company will make available on request circuit diagrams,component part lists,descriptions, calibration instructions, or other information necessary to assist the User's qualified technicians in repairing parts of the equipment specified by the manufacturer as repairable. Sound and Indicator Description Display and Operation Description Measuring Ear Temperature Measuring Forehead Temperature Foreword The infrared thermometer can be used to read the body temperature by measuring the ear and forehead temperature, which is suitable for adult and children (ear test mode only for the child above 3 months). The device can be used in homecare environment, and the dan intended operator, and all the functions can be safely used. This thermometer complies with the requirements of ISO 81060 -2-56. Replacing the Batteries Cleaning and Disinfection Maintenance Troubleshooting Technical Specifications Security Type Storage and Transportation Condition Warranty and After-Sales Service EMC Information Appendix 2 Unpacking and Inspection Before initial use, please carefully open the package and check whether all parts are intact based on the packing list and whether the parts are damaged during transportation, and strictly follow the instruction manual for installation and operation. If there is any damage or operation-related problem, please directly contact us and provide us with your order number, device model, serial number and email address, well try our best to help you until youre satisfied. Packing List No. Name 1 2 3 4 5 Infrared Thermometer Pouch Operating Manual Quick Start Guide AAA Battery (Optional) Safety Precautions Quantity 1 1 1 1 2 Before using this thermometer, please carefully read the following precautions:
Caution Do not place this equipment out of the reach of children, who may inadvertently damage it. 3 The lens of the probe is a fragile part of the infrared thermometer. Please protect it carefully. Do not throw away used batteries at will, because waste batteries pose an environment hazard. Its recommended to send the waste batteries to a designated collection point for disposal, so as to prevent environmental pollution. If the thermometer is not going to be used for more than 2months, remove the batteries and keep the thermometer properly. Do not immerse the thermometer into water or put it under sunlight for direct exposure. The thermometer should be avoided from strong impact or vibration, otherwise it may be damaged. A normal body temperature varies from person to person. Keeping track of a persons body temperature changes will help determine whether a person has a fever. Do not take a measurement if you just exercise or are emotionally excited. You should rest for about 20 minutes before taking a measurement. The probe should be cleaned after each use. Do not use the thermometer on newborns or for continuous temperature monitoring purposes. Do not use the thermometer for other than its intended purposes. Please follow the measuring instructions in the manual and be careful when measuring a childs temperature. Do not immerse the thermometer into water or any other liquid. For cleaning and disinfecting methods, please follow instructions in urinating, etc., even in the absence of fever. Cleaning and Disinfection. Do not directly touch the top of the probe, because there is a precise temperature sensor on the top. Keep the probe clean to ensure accurate measurement results. If the ear canal is dirty, first clean the ear canal with a cotton swab before taking a measurement. The temperature of the measuring environment should not be too cold or too hot. If you enter the measuring environment from storage environment, you should stay in the measuring environment for over 30 minutes before taking a measurement. Do not take a measurement in an environment with temperature higher than 40 (104) or lower than 10
(50.0), because the normal operating temperature of the thermometer is exceeded under such environment. When the thermometer reaches the expiration of its service life, throwing it away at will poses an environment hazard. Its recommended to send it to your local collection point or handling or send it back to the manufacturer for Recycling Replaceable accessories of the thermometer include two 1.5V AAA batteries. Do not use batteries of different voltage or Do not use the thermometer if there are signs of damage on the measuring sensor or on the instrument itself. If damaged, do not attempt to repair the instrument! Please contact the dealer. It is dangerous to make a self-diagnosis or self-treatment based on the obtained measurement results. For such purposes, please consult a doctor. When the performance changes (such as: inaccurate measurement or abnormal display), please stop using it immediately and contact the sales service personnel in time. When the ambient temperature is less than 10C, please take the device to the place where the ambient temperature is between 10C~40C at least When the ambient temperature is higher than 40C, please take 1 hour;
the device to the place where the ambient temperature is between 10 C~40C at least 2 hours. Extreme temperature,humidity and altitude may lead to inaccurate measurements. Storage environment (atmospheric pressure range 70kPa ~ 106kPa, temperature -20 ~ +55, relative humidity 0% ~ 95%RH) and use environment (atmospheric pressure range 70kPa ~ 106kPa, temperature
+10 ~ +40, relative humidity 15% ~ 95%RH) beyond the specified range of use, The system may not achieve the claimed performance, and specification. There are no other replaceable parts and materials. measurements may be inaccurate.
)No maintenance or servicing the device when using. Please consult your doctor if you see symptoms such as unexplained irritability, vomiting, diarrhea, dehydration, changes in appetite or Warning activity, seizure, muscle pain, shivering, stiff neck, pain when Do not forcibly insert the probe into the ear canal, otherwise the ear 4 canal may get injured. Keep the thermometer out of reach of children. Type BF applied part. If the thermometer is still in use when it has reached the specified Information about a manufacturer service life, it will cause inaccurate measurement results. This thermometer is not intended for diagnosis or treatment of any Refer to instruction manual illness. The measured temperature results are for reference only. It is dangerous to make a self-diagnosis or self-treatment based on the Comply with local regulations about disposal obtained measurement results. Please take a doctors diagnosis as a standard. Do not charge ordinary alkaline batteries or throw them into a fire, otherwise the batteries may explode. Do not modify this equipment without authorization of the manufacturer. Do not leave the small parts where children can reach them. Children may swallow them. If a child accidentally swallows them, please contact a doctor immediately. Portable and mobile RF communication devices may affect the performance of the infrared thermometer. When measuring, please do not use mobile phone or other devices with strong electromagnetic interference around. This device is prohibited to be used in an environment with the presence of a flammable anesthetic mixture with air or with oxygen or nitrous oxide. Symbols and Descriptions Symbol Description 5 Date of manufacture Use-by date Batch code Serial number Caution IP22 2 Protected against solid foreign objects of 12,5 mm and greater;
2 If keep the thermometer in 15 degree angle, it still can prevent the water drop. Medical device Importer CE marking Authorized Representative In The European Community Axillary temperature 34.7C37.3C / 94.46F99.14F Rectal temperature 36.6C38.0C / 97.88F100.40F People of different ages and genders have little difference in Unique Device Identifier terms of normal body temperature. In general, the temperature Keep dry Fragile, handle with care RoHS RoHS mark Non-ionizing electromagnetic radiation Common Knowledge of Human 1)Body Temperature Generally, human body temperature is measured via the following main sites: forehead, cochlea, armpit, oral cavity and anus, etc., because temperature readings obtained from the above sites are the closest to human body temperature. However, there exist certain differences for actual temperature readings measured from different sites. The specific differences are as follows:
Measuring site Forehead temperature Ear temperature Oral temperature 6 Normal temperature range 36.1C37.5C / 97.0F99.5F 35.8C38.0C / 96.44F100.40F 35.5C37.5C / 95.9F99.5F of a newborn baby or child is higher than that of an adult, the temperature of an adult is higher than that of an elder, and the temperature of a female is about 0.3 higher than that of a male. Body Temperature Day-Night Variation Graph Human body temperature fluctuates over time during a day and is affected by external factors. The same person has the lowest temperature during 02~04 a.m. and has the highest temperature during 14~20 p.m. Under normal circumstances, the day-night temperature difference is not greater than 1. Product Introduction 1) Overview Infrared thermometer is a measuring instrument which utilizes infrared receiver 4) Intended Uses The infrared thermometer takes human body temperature via the eardrum or forehead. It applies to all age groups except for babies under three months. principle to measure human body temperature. During use, you only need to aim Both devices apply to both professional use and home use. the probe at the human forehead or eardrum, then press measure button, and you Intend users ll get quick and accurate measured temperature readings. 2) Product Structure The thermometer consists of an outer casing, LED screen, a buzzer, an infrared temperature sensor and a microprocessor, etc. 3) Measuring Principle The infrared temperature sensor collects the infrared energy emitted from the eardrum or forehead skin surface, the collected energy passes through the optical filter and is then absorbed by the thermopiles to generate heat to raise their own temperature, and the temperature difference on both sides of the thermopiles produces voltage output, which is then converted to temperature value via the measurement circuits. can read and understand the user manual. 5) Contraindications Do not use the thermometer if the ear is infected with otitis or suppuration. 6) Physiological Effects The product will not produce toxic substances, no harm to human body or cause any sensitization, etc. Product Features 1) Safe to Use Passive infrared receiver technology. 2) Easy to Operate Handheld design, easy to operate. One button operation, automatic measurement. 3) Quick Measurement 1 second fast measurement. 4) High Accuracy Adopts advanced infrared temperature-sensing element with high sensitivity. Features temperature calibration program and accurate algorithm, and the measured result can truly reflect human body temperature. 7 5) Practical Functions 40 sets of memories for easy recall;
Fever warning;
Front light;
Mute/Unmute;
/ unit switching;
Auto shut-down, low power consumption. 6) Wide Applications The forehead temperature mode applies to people of all ages 2 Mute-unmute button/Unit toggle button (indicated by button on the lower left corner of the screen) 3 4 Measure button/Front light on/off button/Power on/off button Mode button (human body/adjusted temperature)/Memory button (indicated by M button on the lower right corner of the screen) LED indicator light Probe cover (put the cover on when measuring forehead temperature) and the ear temperature mode applies to people above three Probe (take the cover off when measuring ear temperature) months old. Main Structure Front light (it lights up in ear temperature mode) Battery compartment Battery compartment button Display Description 1 LED display screen 2.Child forehead temperature mode 1.Adult forehead temperature mode (above 12 years old) 8 3.Ear temperature mode 4.Adjusted mode 5.Fahrenheit degree 6.Celsius degree 7.Temperature value 8.Front light indicator 9.Low battery indicator 10.Mute/Unmute indicator Sound and Indicator Description Temperature range Sound Indicatorstatus Forehead temperature 32.0-37.589.6-99.5/
One long beep Green 99.6-100.437.6-38.0/
6 short beeps (2 Orange short beeps each time) 100.5-109.238.1-42.9/
6 short beeps (2 Red short beeps each time) Ear temperature 32.0-37.5/89.6-99.5 One long beep Green 37.6-38.0/99.6-100.4 6 short beeps (2 Orange short beeps each time) 38.1-42.9/100.5-109.2 6 short beeps (2 Red 9 Adjusted short beeps each time) 32.0-199.00-100/
One long beep Note: When the measured forehead temperature or ear temperature falls in the range of 32.0-37.5 (89.6-99.5),the buzzer of the thermometer will issue a long beep and the indicator will light up in green, indicating the temperature is normal. When the measured forehead temperature or ear temperature falls in the range of 37.6-42.9 (99.6-109.2), the buzzer of the thermometer will issue 6 short beeps (2 short beeps each time) and the indicator will light up in orange or red, indicating the temperature is rather high and you may have a fever. If youre uncertain, please consult your doctor. Display and Operation Description Screen display Operating instruction
/display status Measuring ear temperature Sound and indicator status Take off the probe See Sound and cover, Indicator press the measure Description section. button to turn on the thermometer, and the thermometer will automatically enter ear temperature mode and the icon will display on the screen. Or you can also press mode button (M button) to switch to ear temperature mode if necessary. Properly insert the See Sound and probe into the ear Indicator canal, press the Description measure button, and section. the ear temperature will display on the screen. Measuring forehead temperature 10 Out of measurement range Put on the probe cover, See Sound and press the measure Indicator button to turn on the Description thermometer, then section press the mode button
(M button) to switch to human body temperature mode, and the thermometer will enter forehead temperature mode and the icon or will display on the screen. Aim the probe at the center of the forehead
(between the eyebrows) until touching the forehead skin or with a distance of 0-3cm (0-1.18 inches), press the measure button, and the forehead temperature will display on the screen. Ear temperature mode:
One long beep, the In power-on status or No sound. when the measured ear indicator temperature is lights up in red. higher than 42.9
(109.2). Forehead temperature mode: when the measured forehead temperature is higher than 42.9
(109.2). Ear temperature mode:
One long beep, when the measured ear the indicator lights up in red. temperature is lower than 32.0C89.6F). Forehead temperature mode: when the measured forehead temperature is lower than 32.0C(89.6F). Checking 40 sets of memory data 11 power-off status, press and hold the memory button (M button) for about 5s to enter memory mode. The screen display 01then displays the 1st group of recorded temperature value. Press the memory button again to check the next recorded value, and the screen displays02, then displays the recorded value. You can check a total of 40 temperature readings. When the maximum number of records is exceeded the earliest recorded data will be overwritten. Note: 01 indicates the last recorded temperature value. Forehead temperature and ear temperature can both be recorded Human body temperature No sound. mode includes forehead temperature
or
) mode and ear temperature (
) mode. Switching between /
In power-on status, No sound. press and hold the unit toggle button (
button) for about 5s to switch between and . Error message/low battery When the ambient One long beep, the temperature is higher than 40.0 (104.0) or lower than 10.0
(50.0) indicator lights up in red. 12 still can use the thermometer. But it may cause inaccurate readings. Measuring Ear Temperature 1.For initial use of the thermometer, please first install the batteries. 2.Take off the probe cover before measuring the ear temperature. 3.Press the measure button to turn on the thermometer, and the thermometer will automatically enter ear temperature mode and the icon will display on the screen. Or you can also press mode button (M button) to switch to ear temperature mode if necessary. 4.Carefully insert the probe into the ear canal, press the measure button again, and the ear temperature reading will display on the screen immediately. Do not forcibly insert the probe into the ear canal, otherwise the ear canal may get injured. Note:
For children under a year old, pull the ear straight backwards. For children above a year old, pull the ear up and straight backwards. Do not forcibly insert the probe into the ear canal, otherwise the ear canal may get injured. Be careful when measuring the ear temperature of a child, Note: The battery icon will flicker, it means the battery is low, but you as a childs earhole is small 13 Measuring Forehead Temperature After a Measurement 1.For initial use of the thermometer, please first install the batteries. After a Measurement 1.After each measurement, you can enter memory mode to 2.Keep the probe cover on when measuring the forehead temperature. 3.Press the measure button to turn on the thermometer. 4.Press the mode button (M button), and the thermometer will query the recorded temperature readings. For more details, please see Checking 40 sets of memory data. 2.After the measurement, clean the thermometer with a dry, enter forehead temperature mode and the icon or will soft cloth and then place it in a dry and well-ventilated place. display on the screen. 3.You should wait at least 10 seconds between each measurement. 5.Point the probe at the center of the forehead (between the eyebrows) until touching the forehead skin or with a distance of It is dangerous to make a self-diagnosis or self-treatment 0-3cm (0-1.18 inches) based on the obtained measurement results. For such purposes, please consult a doctor. Note:
1.The thermometer is intended for indoor use. Ensure there is no strong air convection (for example, winds blowing from an electric fan, an air conditioner or a heater) when using this device to measure the temperature of a target. 2.Ensure the ear canal is clean before measuring the ear temperature. If there is earwax, its recommended to clean it with a cotton swab, otherwise it may cause inaccurate measurement results or make the probe dirty. 6.Press the measure button again, and the forehead temperature 3.Do not hold the thermometer for a long time, because it is reading will display on the screen immediately. sensitive to the ambient temperature. 7.The thermometer will automatically turn off if there is no 4.Ensure the probe is clean and without obstruction before use. operation within 30s. Or you can also press and hold the 5.Ensure there is no sweat or obstruction (such as hairs, etc.) measure button for 5s to manually turn off the thermometer before measuring the forehead temperature, otherwise it may
(with probe cover attached). cause inaccurate measurement results. 14 6.If there is sweat on your forehead or you apply a cold compress or take other cooling measures, it will result in lower Please choose batteries of the same model or speci- fication. Waste temperature readings. Therefore, measurement under such batteries should be disposed of according to your local environmental protection circumstances shall be avoided. Replacing the Batteries requirements. Remove the batteries if the thermometer will not be used for more than two 1.Press the battery compartment button to eject the battery compartment. 2.Install 2xAAA batteries according to correct polarities and then close the battery compartment properly. months. Cleaning and Disinfection Recommended cleaning agents:
Medical cleaning agent Household neutral cleaning agent Steps for cleaning:
1.Remove the batteries before cleaning. 2.Wipe the body of the thermometer with a clean, soft cloth and clean the lens with a dry cotton swab. 3.You can also wipe the body of the thermometer with a clean, soft cloth dipped with little neutral cleaning agent or water. Please make sure the polarities of the batteries are not reversed when installing the batteries, otherwise damage may be caused to the thermometer. If youre unable to take a measurement with the low battery icon displaying on the screen, you need to replace with new batteries. 15 Do not let water immerse into the lens of the probe, as this Do not use high-temperature steam, ultraviolet irradiation, can cause damage!
and etc. for disinfection, as this may cause damage to Wiping the lens with a tissue may scratch the lens of the the equipment or accelerate aging!
probe, resulting in inaccurate measurement results. Its recommended to disinfect the thermometer before Corrosive cleaning agent is not allowed. Be extra careful while cleaning. Do not touch the lens of the probe with hard adjusted and do not immerse any part of the thermometer into water to avoid any liquid getting into the and after each use, and each disinfection should be completed within 1 minute. You shouldnt repeatedly disinfect the thermometer for more than 2 times each time. After disinfection, you need to wait for at thermometer least 10 minutes before next-time use. Its recommended to clean the thermometer once every Cleaning and disinfection should be carried out under the following conditions:
week, and each cleaning should be completed within 3 Temperature: +10~+40 (50-104), relative humidity:
minutes. You shouldnt repeatedly clean the thermometer 15%~85%RH, non-condensing, atmospheric pressure:
for more than 3 times each time. After disinfection, you need to wait for at least 10 minutes before next-time use. After cleaning the thermometer with medical alcohol, you need to wait for 5 minutes before next-time use, otherwise 86kPa~106kPa. Dispose the measurement results may be affected. Disinfection:
Recommended disinfecting agents:
70% isopropyl alcohol solution 75% medical alcohol 3% sodium hypochlorite solution Steps for disinfection:
1.Wipe the body of the thermometer with a clean, soft cloth dipped with little disinfectant, then wipe it dry immediately. 2.You can also wipe the body of the thermometer with a clean, soft cloth dipped with little 75% medical alcohol for disinfection. 16 Dispose of the equipment and batteries when its service life is reached.Follow local regulations regarding the disposal of such product Maintenance Preventive inspection and maintenance cycle 1.During normal use, a weekly check should be performed to see if the thermometer poses a potential safety hazard, such as whether the lens is broken, whether the outer casing has cracks, and whether the probe is dirty, so as to ensure your usage safety. If there is a safety hazard, please stop using it immediately. Malfunction Unable to power on The thermometer should be cleaned once a year if it is not going to be used for an extended period. 2.After each use, please clean the probe according to the methods mentioned in Cleaning and Disinfection. 3.Please keep the thermometer in a dry, well-ventilated, dust-free and pollution-free place without direct sunlight. Ensure the storage and transportation conditions meet the requirements. 4.Regularly check whether the thermometer poses a safety hazard. 5.If the thermometer is not going to be used for an extended period (more than 2 months), please remove the batteries and keep the thermometer properly. 6.We suggest to calibrate the device once a year at least. Please contact manufacturer or agent if you need. Troubleshooting 17 Er1 is displayed when powered on The measured temperature is too low compared to normal temperature range The measured temperature is too high compared to normal temperature range Possible cause Solution The battery level is too low. Polarities of the batteries are reversed. The thermometer is damaged.the degrade sensors The ambient temperature is higher than 40 (104)than 10 (50). or lower The lens of the probe is dirty. the probe and the measuring target The distance of is too far. The thermometer is moved from a cold environment to the measuring environment and has not stayed for more than 30 minutes. The probe is damaged. Replace with new batteries. Check the polarities of the batteries and install the batteries correctly. Contact the manufacturer. Please take a measurement with ambient temperature in the range of 10~40 (50-104). Clean the lens of the probe with a cotton swab. Adjust the measuring distance and move the thermometer probe close to the measuring target. stay the thermometer in the Let measuring environment for more than 30 minutes, then take a measurement again. Contact the manufacture. Technical Specifications Product name Model Infrared thermometer AOJ-20F Power supply mode Battery-powered Working voltage 3V Battery specification 2xAAA batteries Working mode Display mode Continuous operation LED screen display Measurement time About 1 second ESSENTIAL PERFORMANCE Measurement Range: 32.0C-42.9C (89.6F-109.2F) Accuracy: 0.2C/0.4F Statement The clinical accuracy or clinical deviation of the medical infrared frontal thermometer has been clinically verified and can be obtained by contacting the manufacturer. Warranty and After-Sales Service The device is under warranty for 12 months from the date of purchase. The batteries, the packaging, and any damage Temperature display range Measurement: 32.0C-42.9C(89.6F-109.2F) caused by improper use are not covered by the warranty. Adjusted temperature:
0.0C-100.0C(32.0F-199.0F) Measurement mode:0.2C/0.4 F Direct mode:1.0C / 2.0F 0.1/F The thermometer will automatically turn off if there is no operation within 60s. Display resolution Auto shut-down Anti electronic shock degree Type BF APPLIED PARTS Anti electronic shock type Internal Power Supply Dimensions (mm) 164.4mm x 40mm x 43.9mm Weight (g) 93g (without batteries) Normal operating condition Temperature:10C-40C(50F-104F) Excluding the following user-caused failures:
Failure resulting from unauthorized disassembly and modification. Failure resulting from an unexpected dropping during application or transportation. Failure resulting from not following the instructions in the instruction manual. EMC Information Caution The Infrared thermometer needs special precautions regarding EMC and needs to be installed and put into service according to the EMC information provided in the ACCOMPANYING DOCUMENTS. WARNING Humidity: 15-95%RH, non-condensing Atmospheric pressure:70-106kPa Dont near active HF surgical equipment and the RF shielded room of an ME system for magnetic resonance imaging, where the intensity of EM disturbances is high. Storage and transportation 18 condition Ambient Temperature: -20C-55C(-4F-131F) Relative Humidity: 0-95% RH, non-condensing Atmospheric pressure: 50kPa to 106kPa Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result in improper operation. If such use is necessary, this equipment and the other equipment should be observed to verify that they are operating normally. Use of accessories, transducers and cables other than those specified or provided by the manufacturer of this equipment could result in increased electromagnetic emissions or decreased electromagnetic immunity of this equipment and result in improper operation. Portable RF communications equipment (including peripherals such as antenna cables and external antennas) should be used no closer than 30 cm (12 inches) to any part of the equipment, including cables specified by the environment specified below. The customer or the user of the Infrared Thermometer should assure that it is used in such an environment. Emission test RF emissions CISPR 11 Compliance Group 1 RF emissions CISPR 11 Class B Harmonic emissions IEC Not applicable 61000-3-2 Not applicable Voltage fluctuations/ flicker emissions IEC 61000-3-3 manufacturer. Otherwise, degradation of the performance of this equipment Electromagnetic Immunity could result Notice If users or patients have occurred any serious incident that relation to the device, please report to manufacturer and the competent authority of the Member State in which you are established. Appendix Guidance and manufacturers declaration - electromagnetic emissions - for ALL EQUIPMENT AND SYSTEMS Guidance and manufacturer's statement - Electromagnetic emission The Infrared Thermometer is intended for use in the electromagnetic 19 Guidance and manufacturer's declaration - Electromagnetic Immunity The Infrared Thermometer is intended for use in the electromagnetic environment specified below. The customer or the user of the Infrared Thermometer should assure that it is used in such an environment. Immunity Test IEC 60601-1-2 Test level Compliance level Electrostatic discharge (ESD) 8 kV contact 2 kV, 4 kV, 8 kV, 15 kV air 8 kV contact 2 kV, 4 kV, 8 kV, 15 kV air IEC 61000-4-2 Electrical fast transient/burst IEC 61000-4-4 Not applicable Not applicable IEC61000-4-6 Radiated RF IEC6100 0-4-3 10 V/m 80 MHz 2,7 GHz 80 % AM at 2Hz 10 V/m 80 MHz 2,7 GHz 80 % AM at 2Hz Surge Not applicable Not applicable NOT EUT is the a.c. mians voltage prior to application of the test level. Not applicable Not applicable Guidance and manufacturer's declaration - Electromagnetic Immunity Electromagnetic Immunity The Infrared Thermometer is intended for use in the electromagnetic environment specified below. The customer or the user of the Infrared Thermometer should assure that it is used in such an environment. IEC 61000-4-5 Voltage dips, short interruptions and voltage variations on power supply input lines IEC 61000-4-11 Power frequency magnetic field IEC 61000-4-8 30 A/m 50Hz/60Hz 30 A/m 50Hz/60Hz Radiated Test Band Service Modulat
(MHz) ion Frequ ency
(MHz) RF IEC61000
-4-3
(Test specificati ons for ENCLOS URE PORT Distan ce(m) Maxim umPo wer
(W) Complian ce level
(V/m) IEC 606 01-1
-2 Test Lev el
(V/m
) Conducted RF Not applicable Not applicable 20 385 380 TETRA 400 Pulse 1.8 0.3 27 27 IMMUNIT 390 Y to RF wireless communic ations equipmen t) 450 430 470 704 787 800 960 710 745 780 810 870 930 modulat ion 18 Hz GMRS 460, FM 2 0.3 28 28 1970 GSM 1900;
ion DECT;
217 Hz LTE Band 1, 3, 4, 25; UMTS FRS 460 5 kHz deviatio n 1 kHz sine LTE Band 13, Pulse 0.2 0.3 9 9 17 modulat ion 217 Hz GSM 800/900, Pulse 2 0.3 28 28 TETRA 800, modulat iDEN 820, ion CDMA 850, 18 Hz LTE Band 5 2450 2 400 Bluetooth, Pulse 2 0.3 28 28 2 570 WLAN, modulat 802.11 b/g/n, ion RFID 2450, 217 Hz 2450 2 400 Bluetooth, Pulse 2 0.3 28 28 2 570 WLAN, modulat 802.11 b/g/n, ion RFID 2450, 217 Hz LTE Band 7 810 810 810 WLAN, Pulse 0.2 0.3 9 9 802.11a/n modulat ion 217 Hz 1720 1 700 GSM 1800;
Pulse 2 0.3 28 28 1845 1 990 CDMA 1900;
modulat 21 Shenzhen AOJ Medical Technology Co., Ltd. Room 301&4F, Block A, Building A, Jingfa Intelligent Manufacturing Park, Xiaweiyuan, Gushu Community, Xixiang Street, Bao'an District, 518126 Shenzhen, PEOPLES REPUBLIC OF CHINA Email: info@aojmedical.com Website: www.aojmedical.com Tel: 86-755-2778 6026 Made in China Share Info GmbH Heerdter Lohweg 83, 40549 Dsseldorf, GERMANY Tel: 0049 179 5666 508 E-mail: EU-Rep@share-info.com Guidance and manufacturers declaration - electromagnetic Immunity Radiated Test Modulatio IEC Compliance level RF Frequency n 60601-1-2 Test Level
(A/m) 30 kHz CW 134,2 kHz Pulse 8 65 modulatio n 2.1 kHz 13,56 MHz Pulse 7,5 modulatio n 50 kHz
(A/m) 8 65 7,5 IEC61000
-4-39
(Test specificati ons for ENCLOS URE PORT IMMUNIT Y to proximity magnetic fields) 22 Federal Communications Commission (FCC) Statement. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide Reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this device not expressly approved by Shenzhen AOJ Medical Technology Co., Ltd. may void the FCC authorization to operate this device.Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. RF exposure statement:
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The device is installed and operated without restriction. 23
1 | label and location | ID Label/Location Info | 663.40 KiB | March 26 2024 |
FCC ID: 2A2EL-AOJ-20Y Page 1 of 1 Report No.: CTL2401123011-WF FCC ID Label Information Label location:
Infrared Thermometer Model: AOJ-20Y FCC ID: 2A2EL-AOJ-20Y
1 | ANT Report | Cover Letter(s) | 695.27 KiB | March 26 2024 |
8232 PCB Antenna test report Product Name:
8232 Antenna Type:
PCB antenna Writer:
He Lie Maximum Gain0.2dBi Efficiency:36.98%
Version 1.0 Date2022-07-15 NO0000000001 Manufacturers name:
Shenzhen Guangchengda Circuit Technology Co., Ltd. ADD:
2F, Building A6, Pengjin Industrial Park, Yanchuan North, Songgang Town, Bao'an District, Shenzhen, CHINA Content 1. General Description.................................................................................3 2. Technical Information............................................................................. 3 3. Test Standards..........................................................................................3 4. Test Item.................................................................................................. 4 5. Test Photo................................................................................................ 4 Appendix A S11/VSWR.............................................................................5 Appendix B Radiation Pattern(1D and 3D)................................................5 Appendix C Test Setup Photo.....................................................................6 Appendix D EUT Photo..............................................................................8 1. General Description EUT Name 8232 Antenna Wireless type Antenna Type Dimensions Bluetooth PCB antenna Appendix A 2. Technical Information Frequency Range 2402MHz~2480MHz Test Frequency 2400,2410......2500MHz 3. Test Standards Identity Document Title IEEE 149-1979 IEEE Standard Test Procedures for Antennas 4. Test Item Report Section Appendix B Appendix C Description S11/VSWR Gain and Efficiency Appendix D Radiation Pattern1D and 3D 5. Test Photo Report Section Description Appendix E Test Setup Photo Appendix A Antenna Dimension Appendix B Gain and Efficiency Frequency (MHz) Efficiency(%) GaindBi 2400 2410 2420 2430 2440 2450 2460 2470 2480 35.08%
36.56%
35.56%
36.56%
36.98%
35.56%
35.16%
35.16%
35.81%
-0.23
-0.01
-0.1 0.02 0.2
-0.05 0.04 0.17 0.13 2490 2500 34.75%
32.28%
0.15
-0.31 Appendix C Radiation Pattern(1D and 3D) JOO, 27<
90 120 21/i 1so 180 Appendix D Test Setup Photo
1 | FCC Short & Long Term Confidentiality Request | Cover Letter(s) | 84.29 KiB | March 26 2024 |
Shenzhen AOJ Medical Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2A2EL-AOJ-20Y Date: March 19, 2024 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);
External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature
Name: Faye Lu Title: RA
1 | USA agent | Attestation Statements | 78.58 KiB | March 26 2024 |
Shenzhen AOJ Medical Technology Co., Ltd. U.S. Agent Designation for Service of Process
(Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification Section 2.911(d)(7) Information Designated U.S, Agent Company Name: SHARE INFO INC. FRN: 0033426495 Contact Name: Clare Ho Street Address: 3557 158th St, Flushing, NY 11358, United States City/Province/Zip: NY 11358, United States Telephone No: (929) 410-29641 Email: us-agent@share-info.com This letter is to confirm that we (the Designated U.S, Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Ca ne Date: wr, 05.18 Signed by (Printed Name/Title): Clare Ho/Manager Pen ee erate tae hgh ete oe ne . ne, _ The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Shenzhen AOJ Medical Technology Co., Ltd. FRN: 003 1047103 Grantee Code: 2A2EL FCC ID: 2A2EL-AOJ-20Y Contact Name: Faye Lu Street Address: Room 301&4F, Block A, Building A, Jingfa Intelligent Manufacturing Park, Xiaweiyuan, Gushu Xixiang Street, Bao'an District, Shenzhen, 51 8126, China Telephone No: 0755-27786026 Email: regulation@aojmedical.com Applicant Signature: (fe Le Date: Phyo 1 Signed by (Printed Name/Title); Faye Lu/RA
1 | cover letter | Attestation Statements | 107.74 KiB | March 26 2024 |
Shenzhen AOJ Medical Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: March 19, 2024 FCC ID: 2A2EL-AOJ-20Y Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing Shenzhen AOJ Medical Technology Co., Ltd. certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing Shenzhen AOJ Medical Technology Co., Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Applicant: Shenzhen AOJ Medical Technology Co., Ltd. Address: Room 301&4F, Block A, Building A, Jingfa Intelligent Manufacturing Park, Xiaweiyuan, Gushu Xixiang Street, Bao'an District, Shenzhen, 518126, China Contact Person: Faye Lu Tel.: 0755-27786026 Email: regulation@aojmedical.com Sincerely, Signature:
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2024-03-26 | 2402 ~ 2480 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2024-03-26
|
||||
1 | Applicant's complete, legal business name |
Shenzhen AOJ Medical Technology Co., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0031047103
|
||||
1 | Physical Address |
Room 301&4F, Block A, Building A, Jingfa Intelligent Manufacturing Park, Xiaweiyuan, Gushu
|
||||
1 |
Room 301&4F, Block A, Building A, Jingfa
|
|||||
1 |
Xixiang Street, Bao'an District, Shenzhen, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
a******@qai.org
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2A2EL
|
||||
1 | Equipment Product Code |
AOJ-20Y
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
F**** L********
|
||||
1 | Title |
RA
|
||||
1 | Telephone Number |
0755-********
|
||||
1 | Fax Number |
0755-********
|
||||
1 |
r******@aojmedical.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Shenzhen AOJ Medical Technology Co., Ltd.
|
||||
1 | Physical Address |
China
|
||||
1 |
r******@aojmedical.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Infrared Thermometer | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is the maximum conducted output power. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Shenzhen CTL Testing Technology Co., Ltd.
|
||||
1 | Name |
T****** Q******
|
||||
1 | Telephone Number |
86-75********
|
||||
1 |
q******@ctl-lab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0002000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC