Contents Important Safety Instructions WIRELESS HEADPHONES Anatomy Agusting the headband Pairing Connecting the 897to an audio source Disconnecting the 897 Switching the 897 OFF Changing thevolume Remote conteling the audio source from897 Managing calls Cleaning and maintaining the 897/ Trouble shooting Troubleshooting / FCC Statement FCC Statement ~Safety Information FCC Statement ~ CAUTION Specticaions WoW Technologies Limited Warranty (US Only) eu Wey Gaba Lado cy WARNINGS Please read these warnings before using your headphones. To ensure safety, observe all wamings while using this equipment. Do not disassemble or attemptto repair headphones. Always include this user manual when passing to third party Donot use a defective product if found, Preventing damages tohealth and accidents Donot disassemble or attempt to repair headphones. Always include this user manual when passing to third party Donot use a defective product if found,
-Do not listen at high volume levels for long petiod of time to prevent damages to theear.
-Always maintain a distance of 394 (10cm) between the ear cups and any cardiac pacemaker or implanted defibrillator since the product
{generates permanent magnetic fields. Keep the product, accessory and packaging parts out of reach of children pets who could swallow smaller pieces, Preventing damages to the productand malfunctions
+ Always keep the product dry and do nat expose itto extreme tempera-
tures (eg. hair dryers, heater, extended exposure to sunlight, etc) to avoid corrosion or deformation.
-Only clean the product with a soft, dry doth. Switch off the product after us to conserve battery power. Intended Use The Nakamichi BTHPOS Noise Isolating is a wireless headphone designed to work with mobile phones or other Bluetooth devices/
Bluetooth compliant devices and allows for wireless streaming or phone cals. Improper use means using the product other than as described in this User manual under operating conditions which dffer those described in this user manual Remote controlling the audio source Press Once: Increase volume WV+ Press & Hold: Next Track Press once: Decrease volume PI/V Press & Hold: Previous Track Pil Music PLAY/PAUSE Button CON/OFF/PAIRING Button D Gatipidcup funtion These functions arenot supported by all connected Bluetooth devices, When you received a call the red LED light wil flash twice per second. Yourmobile phone's ringtone will also alert you toa call, if your mobile phone supports this function, If your mobile phone automatically transfers the call to the headphone, you will hear a beep sound from thedevice. If your mobile phone does not automatically transfer the call to the headphone, see the instruction manual of your mobile phone. To manage a call from your BTHPOS, press the On/Off button, But Fun Press onceto accept the call Press and hold for at least 2 seconds to CU) eectthecal Press once during a phone conversation toend the call
=12-
MeN Ga Late SAFETY INSTRUCTIONS for Lithium-Polymer Battery Pack If abused of misused, the battery pack may leak. In extreme cases, it may even present an explosion of fire hazard, Heat generation Firedevelopment Explosion Smoke of gas development Please note that Nakamichi does not accept liability for damage arising from abuse or misuse, 1. Keep away fromchildren. Immediately remove the battery from an obvious defective product. Dispose the battery pack at special callection points or return it to a specialist dealer. liv, When not using the device for extended periods of time, please charge it before usage, v. Only charge the device at ambient temperature between 10C/S0F and 40C/ 10F. vi Do not heat above 70C/158F, eg. do not expose to sunlight or throw the device into afr. Vil, Do not dismantle or mutilate the device. Vill. Do not expose to moisture. 3-
WIRELESS HEADPHONE The 897 Noise Isolating is a wireless headphones which allows for wireless music streaming when used with mobile phones or other Bluetooth devices/Bluetooth compliant devices. Bluetooth The 897 complies with the Bluetooth 40 standard, Viaits Bluetooth interface, it can be connected to a wide variety of Bluetooth enabled devices. Bluetooth wireless technology allows the Nakamichi BTHPO6 to link with your Bluetooth enable devices (e.g. mobile phones, MP3 player, PC or tablets) with a range of up to 33 feet (10 meters). Additional features
+Great for travel: comfortable, rugged and twistable construction Optional connection via audio for music enjoyment with Bluetooth technology. Eo Device cannot be switched on Noaudio signal during a connected Bluetooth connection. Cleaning and mainta CAUTION Liquids can damage the electronics of the headphones! Liquids entering the housing of the product can cause a short-circuit and damages the electronics,
-Keep all liquids far away from the headphone. Donot use any solvents or cleaning agents. For reasons of hygiene, the device should abvays be clean regularly:
Before cleaning, make sure that the product is being charged, Only use a dry and soft cloth to clean the product. Troubleshooting Ee Tis aca ost [echt ace The deviceisswitched Switch the device on. off The deviceisnot aired Check ifthe device ispaired. withanaudio source. _Ifnot,pairthe device with the audio source again The volume i adjusted Increase the volume. twolow.
-13-
Troubleshooting Check f the audio source |
Device cannot The pairing doesnot supports the A2DP profile. bepaired. work Ifnot, usean alternative optional dongles. The audio sourceis Switch the audio source on. switched off If a problem occurs that is not listed in the above table or the problem cannot be solved with the proposed solution, please email tosupportanakamichi-usa.com FCC Statement
|Compliance with FCC rules (USA only) HThis device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation, Notice
[This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC. Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation,
[This equipment generates, uses, and can radiate radio frequency lenergy and, if not installed and used in accordance with the|
instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not Joccur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be|
ldetermined by turning the equipment off and on, the user is lencouraged to try to correct the interference by one or mare of the|
{ollowing measures:
-Reorient or relocate the receiving antenna, Increase the separation between the equipment and receiver.
= Connect the equipment into an outlet on a circuit different from|
that to which the receiveris connected. Consult the dealer or an experienced radio/IV technician for help]
=a ANATOMY Mic Auxin
(ON/OFF , Music Play / Pause BTLED Indicator Charging USB Port Volume increase / Next Track Volume Decrease / Previous Track LED Charging Indictor Adjusting The Headband Foroptimum transmission of good noise attenuation and best possible comfort, the headband has to beadjusted to properly. Wear the headset so that the headband runs over the top of your head. Adjust the length of the headband so that:
The ear pads rest comfortably against your ears, You feel an even and gentle pressure around your ears The headband fits snugly on the head CAUTION Danger of malfunction due to radio waves! The transmitted radio wave of mobile phones can impair the operation of sensitive and unprotect devices. Only use the headphone in environment where wireless Bluetooth transmission is permitted. FCC Statement WARNING FCC WARNING You are cautioned that any changes or modifications not expressly|
approved in this manual could void your authority to operate this, equipment. SAFETY INFORMATION WARNING Please read these safety warnings and cautions carefully to ensure your personal safety and prevent property damage. Fire and Electric Shock Hazard
+ Do not expose your897 to liquid, moisture, humidity, or rain. Do not use the 897 near a bathtub, sink, sauna, pool, or steam room. Exposure of the 897 to moisture could result in electric shock.
= Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, or insert foreign objects in to the Nakamichi BTHPO6. Such actions could result in electric shock.
+ Clean the 897 only with a dry cloth,
= Do not expose your 897 to extremely high or low temperatures,
+ Do not leave your 897 in direct sunlight for extended periods of time.
= Do not leave your 897 near open flames such as cooking burners, candles, or fireplaces.
= Do not block any ventilation openings. BATTERY/CHARGER HAZARD
= Do not dispose of your 897 in a fire. The battery could explode causing injury or death.
+ Only charge the battery in accordance with the user instructions supplied with the 897.
= Donot attemptto disassemble the 897 charger or force open the built-in battery because this may result in electric shock.
~ Do not charge the 897 in damp areas or in extremely high or low temperatures because this could result in electric shock,
= Do not clean the 897 when it is being charged Always unplug the charger first before cleaning the 897 Automobile Accident Hazard
+ Do not leave or store the 897 or any of its accessories near or over your automobiles air bag because serious injury may result when anair bag deploys. Fall Hazard
= Do not place the 897 on high surfaces such as shelves. During music playback the 897 may move which could cause the 897 to shiftand fall offof the edge. CAUTION
= Do not use abrasive cleaners to clean your Nakamichi BTHPO6 because this could cause scratches and damage. Do not bring your 897 in to contact with any sharp. objects because this could cause scratches and damage.
+ Do not insert anything into your 897 unless otherwise specified in the user instructions. This may damage the internal components. Do not attempt to repair, modify, or disassemble your 897 yourself, it does not contain any user-serviceable components.
= Do not attempt to replace your 897 battery, itis built-in andis not changeable.
= Observeall signs and displays that require an electrical device or RF radio product to be switched off in designated areas. Turn off your 897 prior to boarding an aircraft. Do not use the 897 inside an aircraft unless allowed by your airline. Dispose of the 897 and the Nakamichi 8THPOS battery in accordance with local regulations. Do not dispose of the battery with regular household waste. as 16-
ANATOMY Mic Auxin
(ON/OFF , Music Play / Pause BTLED Indicator Charging USB Port Volume increase / Next Track Volume Decrease / Previous Track LED Charging Indictor Adjusting The Headband Foroptimum transmission of good noise attenuation and best possible comfort, the headband has to beadjusted to properly. Wear the headset so that the headband runs over the top of your head. Adjust the length of the headband so that:
The ear pads rest comfortably against your ears, You feel an even and gentle pressure around your ears The headband fits snugly on the head CAUTION Danger of malfunction due to radio waves! The transmitted radio wave of mobile phones can impair the operation of sensitive and unprotect devices. Only use the headphone in environment where wireless Bluetooth transmission is permitted. FCC Statement WARNING FCC WARNING You are cautioned that any changes or modifications not expressly|
approved in this manual could void your authority to operate this, equipment. SAFETY INFORMATION WARNING Please read these safety warnings and cautions carefully to ensure your personal safety and prevent property damage. Fire and Electric Shock Hazard
+ Do not expose your897 to liquid, moisture, humidity, or rain. Do not use the 897 near a bathtub, sink, sauna, pool, or steam room. Exposure of the 897 to moisture could result in electric shock.
= Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, or insert foreign objects in to the Nakamichi BTHPO6. Such actions could result in electric shock.
+ Clean the 897 only with a dry cloth,
= Do not expose your 897 to extremely high or low temperatures,
+ Do not leave your 897 in direct sunlight for extended periods of time.
= Do not leave your 897 near open flames such as cooking burners, candles, or fireplaces.
= Do not block any ventilation openings. BATTERY/CHARGER HAZARD
= Do not dispose of your 897 in a fire. The battery could explode causing injury or death.
+ Only charge the battery in accordance with the user instructions supplied with the 897.
= Donot attemptto disassemble the 897 charger or force open the built-in battery because this may result in electric shock.
~ Do not charge the 897 in damp areas or in extremely high or low temperatures because this could result in electric shock,
= Do not clean the 897 when it is being charged Always unplug the charger first before cleaning the 897 Automobile Accident Hazard
+ Do not leave or store the 897 or any of its accessories near or over your automobiles air bag because serious injury may result when anair bag deploys. Fall Hazard
= Do not place the 897 on high surfaces such as shelves. During music playback the 897 may move which could cause the 897 to shiftand fall offof the edge. CAUTION
= Do not use abrasive cleaners to clean your Nakamichi BTHPO6 because this could cause scratches and damage. Do not bring your 897 in to contact with any sharp. objects because this could cause scratches and damage.
+ Do not insert anything into your 897 unless otherwise specified in the user instructions. This may damage the internal components. Do not attempt to repair, modify, or disassemble your 897 yourself, it does not contain any user-serviceable components.
= Do not attempt to replace your 897 battery, itis built-in andis not changeable.
= Observeall signs and displays that require an electrical device or RF radio product to be switched off in designated areas. Turn off your 897 prior to boarding an aircraft. Do not use the 897 inside an aircraft unless allowed by your airline. Dispose of the 897 and the Nakamichi 8THPOS battery in accordance with local regulations. Do not dispose of the battery with regular household waste. as 16-
The device complies with Bluetooth 40 standard, When switching the device on for the first time, itwill automatically go into pair mode. The device is waiting to be paired with a Bluetooth enable device. Press the On/Off button, the blue and red LED lights will start flashing. This indicates that the headset has entered pairing mode. The LEDs will lash blue and red alternately to indicate the device isin pairing mode. When turning the device on forthe frst time the device willautomat-
ically go intoa pairing mode, if the device is already paired to an audio source, the Bluetooth connection is automatically connected to the audio source, the device's blue LED will be constantly on. AF the device is already paired to an audio source, but if the audio device is switched off or out of range, the device's LED will flash blue. Pairing
-Press and hold the On/Off Button for 2 seconds and itwill go intoa pairing mode immediately, Pairing mode - search for previous device and new device automatically Pairing mode - didnit found previous device and it will search for new available device Pairing mode itwill pair for 3 minutes on going, Pairing mode - after 3minutes press the On/Offbutton oncett reactivate the bluetooth pairing: no device isfound, itil go into an 8 minutes sleep mode. It wil also pair with any previous devices that had been paired before. Pairing mode ~ after 8 minutes of sleep made and there isnt any Previous paired devices active the 897 will tur off
-~7-
Todisconnect the device from the audio source, you can switch off the headphone or by pressing the power button once. The device will til retain the audio source setting untill the Bluetooth function is switch on again, WARNING Danger of hearing damage!
Listening at high volume levels for long periods can ead to permanenthearing defects, Before putting the device on, set the volume to a low level Donot continuously expose yourself to high volumes. FCC Statement Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. FCCNOTICE his device complies with Part 15 of the FCC Rules. Operation i tubject to the flowing wo conditions i: this device may not cause har interference, and 2 This device must accept any interference received, including interference thatmay cause undesired operation FCC CAUTION Thny changes o modifications not expressly approved by the party rexponsblefor compliance could vols the ute sauthory fo fate this equipment this device and its antenna(s) must not be codocated or operating in conjunction with any other antenna or transmitter, Bluetooth SIG The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Further information please visit vaww.bluetoothorg ee Specifications Speaker Diameter 40mmo Frequency Response 20H2- 20,000H2 Impedance 320 Sound Pressure Level 96dBS.PLat 1KHz Rated output power 20mw Aggregate capability 50 mW Battery 400mAH Microphone Diameter 04"1.5mm, Microphone Directivty Omnidirectional Operating temperature range -10C-45C Storage temperaturerange -25C-60C Bluetooth Bluetooth vao Range 33 (feet) Transmission frequency 2402-2408 GHz Modulation csR8635 Transmitter class type Class2
~18
-Press and hold the On/Off button until the red LED flashes twice per second, red LED light will disappear after 2 seconds.
=You will hear a descending beep. The Bluetooth connection will be deactivated and the device switches off automatically. Changing volume
<The 897 allows you to change the volume of the audio signal duringa callor whilelistening to music:
Press Once: Increase volume WWv+ Press & Hold: Next Track Butt Press once: Decrease volume PI/V Press & Hold: Previous Track
~9-
PIR Tatar) Ifyou press the respective button briefly, the volume changes incrementally. fyou pressand hold the buttons down, it will not change volume. When the minimum or maximum volume is reached, an acknowledgment tone will be heard Using AUX-IN 3.5mm cable The897 comes equipped with a convenient 3.5mm cable allowing you to still enjoy your music when the BTHPOS headphones run out of battery. Take note: When you plug in the 3.5mm cable to your 897 the LED blue light will not turn off. When the AUX-In cables is connected to the headphone it will function as an ordinary headphone, therefore all buttons will not be able to function.
=10 WIRELESS HEADPHONES. NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help