Quick Start Guide Smart Wireless P/T Camera Welcome Thank you for choosing our smart camera. Getting started is easy. Whats Included Product Details 1. Connection Preparation Bring the camera and phone within 1 to 3 feet (30 to 100 centimeters) of the router. Lens Light sensor Infrared lights Microphone MicroSD card Router Tuya Smart Tuya Smart Security Camera Bracket (Optional) Wall Mount Screw Sets
(Optional) Quick Start Guide Smart Wireless P/T Camera Model: E95A Model: E95A Power Adapter USB Cable Quick Start Guide Speaker Reset Power interface 2. Get the APP and Account For the best experience, please download the "Tuya smart" APP to your smartphone from App Store or Google Play, or you can also scan the QR code below, the APP icon will be displayed after installed successfully. Camera 30cm~100cm Smartphone Mounting Hole Note: Make sure smart phone is connected with your wireless router. Please note the camera is only working under 2.4G Wi-Fi, not support 5G Wi-Fi. Launch the app from your smartphone and click the Sign Up button. Follow the on-screen instructions. 3. Insert the Micro SD card Insert the Micro SD card gently on the side edge of camera. 4. Connect the power to the camera Connect the power to the camera by Micro USB Power Adapter.
(DC5V/1.5A) The blue light is on, camera is ready for viewing. Press the Reset button for above 5 seconds Blue LED blinks from the screw. 6. Place or Mount Your Camera You can place your camera on a shelf or other flat surface, or you can mount it to the wall. To mount your camera to the wall:
Fasten the mounting screw into the wall, and then mount the camera If youre mounting the camera to drywall, be sure the plastic drywall anchors that are provided. Appendix: Camera LED Guide NO. LED Status Camera Status Red LED on System starting up Red LED blinks quickly Standby for configuration Blue LED blinks quickly Network pairing Blue LED on Camera online Red LED blinks slowly OTA upgrade 1 2 3 4 5 5. Set up your camera Press the Reset button for above 5 seconds, then release the button to reset the camera, then the LED light will blink quickly. Click "Add Device" or "+" on the right corner to add device; Then click
" Security&Sensor" to select" Smart Camera"
Follow the App's instructions and input the right wifi password; Point the QR code to the camera lens for 15-20cm ; Click"HEARD THE BEEP" when you heard "dingding". After processing, it paired successfully. Youre done!
Congratulations! Your camera is set up and ready to go. All trademarks are used for reference purposes only. Thanks again for choosing our smart camera! Makelife safe in your hands!
Boost security mobility in your smartphone!
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body. connected.