Users Manual Model No: B092 Trademark:ANC Product nameWireless headset 1.Product illustration 2.Important safety instruction If used in the correct method, this design and production of this product can ensure your personal safety completely. However, any inappropriate use may lead to potential risk and danger of electric shock or fire hazard. Please read all the safety instructions before installing and using the product. In particular, attention shall be given to the following information:
1. It needs to be stored or used in the ambient temperature. 2. It shall not be placed in water or wet locations. 3. It cant be disposed randomly for it may cause environmental pollution. 4. Without approval, It shall not be disassembled or repaired. 5. The built-in lithium battery cant be disposed in the fire or other places to prevent causing fire hazards. 6. It shall be cleaned with dry cloth. 7. Whenever there is damage, it needs to be repaired by professional personnel. 3.Charging the battery 4.Buttons Functionality Feature Device Status Operation Details Power on Power off Power off Power on Press and hold the MFB button for2s. Press and hold the MFB button for4s. There is a prompt voice power on,the green LED indicator will glow steadily for 2s. There is a prompt voice power off,the red LED indicator will flash for 1s and then turn off. Pairing &
Connection. Volume Up Volume Down Press and hold the MFB button for 4s until the green LED indicator flashes,and then the headset will automatically enter Bluetooth pairing mode.The red/green indicatoe lights will flash alternately. Open the Bluetooth menu on the phone and refresh the Bluetooth device list ,then select the audio device named Tribit CallElite 81 to begin pairing. Callingplaying music Callingplaying music Voice Di when maximum volume &
Di tone when volume over 85 dB Voice Du when minimum volume Short press the +button Short press the -button Next track Playing music Long press the +button The green LED indicator will always on Previous track Playing music Long press the -button The green LED indicator will always on Pause Music Play Short press the MFB button Play Music Pause Short press the MFB button Answer the call Incoming call Short pressthe MFB button Reject the call Incoming call Press and hold the MFB button for 1s End the call Calling Short press the MFB button Re-dial for end phone number. Standby Double click the MFB button Turn on Siri Standby Voice transfer Calling Press and hold the MFB button for 2s Press and hold the MFB The green LED indicator will always on The green LED indicator will always on The red LED indicator will flash interval 200mS The red LED indicator will flash interval 200mS,after reejected the call ,the green light will always on. The green LED indicator will always on The red LED indicator will flash interval 200mS The green LED indicator will always on The red LED indicator will always on button for 2s Three-way call When calling, the third call comes in, click the MFB button to hold the current call and answer the third call;Then click the MFB button to switch between two calls.Double click the MFB button to hang up the current call.Long press the MFB button for 2s to reject the call when the third call comes in. The red LED indicator will flash interval 200mS 5.Technical Data Sheet Type Bluetooth Profile Decode HSP1.2HFP1.6A2DP1.2AVRCP1.4 SBCAACapt-X Feature Version Pair name Description or Detail 5.1 Tribit CallElite 81 Operated distance Over 10m outdoor Transmission Range(Hz) 2402-2480mHz RF launch Class II Receive Sensitivity
-83dBm Compatibility IOS/Android/windows Bluetooth solution QCC3020 Microphone Unit 2718 direction Omnidirectional Sensitivity/S.P.L. Impedance
-42dB1 2.2K Frequency Response 100- 10KHz Operating voltage 1.5-3.6V Mic Diameter 30mm Frequency Response 20 - 20,000Hz+10/-10dB Speaker Impedance 3215%
Sensitivity/S.P.L. 121dB 3dB1KHz) Rated Power 25mw Battery Type Chargeable Li-ion Battery Capacity Work time Charge time Input Plug Length Weight Diameter 400 mAh 22 hours 1.5hours 5V,1A Type C-USB 80mm 6g 25.9*14.58*8.5mm Charge cable Dongle adapter 6.FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference
(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there isno guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna. 2) 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help important announcement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Increase the separation between the equipment and receiver.