User manual Bluetooth Dongle C013 C013 Catalogue 1.Overview ............................................................................................................................................ 3 2. Basic operating functions ............................................................................................................... 4 3. Indicator light ..................................................................................................................................... 4 4.Bluetooth pairing and connection .................................................................................................. 5 5.Specification ....................................................................................................................................... 6 6. FCC Statement -----------------------------------------------------------------------------------------------------7 1. Overview USB Packing A. Bluetooth Dongle : 1 BUser manual: 1 2. Basic operation functions 1. Power on USB After inserting the USB interface into the computer equipment for power supply, it will start automatically 2. Power off USB Unplug the USB and turn it off. 3. Pairing After the computer is plugged in and turned on, it automatically enters the pairing state and searches for nearby Bluetooth earphones 4. loopback connection USB /
USB linkloss The Bluetooth headset can be connected back after the USB is reinserted into the computer and then the headset is turned on or the USB is reinserted into the computer after the headset is turned on, or after the connection distance is exceeded and the USB is returned to the connection distance (within the linkloss time range of the headset) 3. The indicator light 1 Power on: Green lights flashing 2 Power off: Green lights goes off 3/ Pairing status/Unconnected status Green lights flashing 4 Connected state Green light normally on 5, dongle dongle The Dongle is red when the headset is silent and green when the headset is not silent. 4. Bluetooth pairing and connection A. C013 For first use, insert C013 into computer equipment, power on, and enter pairing state (green light flashing) B. C01330S C013Then turn on the bluetooth headset and try to get close to C013 . It will be automatically paired in about 30S. If it has been paired, the Bluetooth headset will automatically connect to the paired C013 each time it is turned on C. When playing music or making a phone call on the computer, the Bluetooth headset can hear the music or make a normal conversation 5. Product specifications Bluetooth specification 5.0 Bluetooth 5.0 Operation frequency 2.402-2.480GHz Supported profile A2DP HFP AVRCP Chip solution ATS2831 Operation range 10 UP to 10 meters CODEC Net weight SBC 2g Measure 25*15.15*5mm Operating temperature
-1055 Operating voltage range 5.00.25V
* The above data are from Oni lab, the actual use time and environment and music may vary 6. FCC Statement following two conditions:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.