WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6808547.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Add your Camera Status LED Guide Remove Protective Film Install the Camera To begin viewing your camera, add it to the Night Owl app or to a compatible recorder. For more detailed setup steps, scan the QR codes below. LED Status Solid Red Camera Status Camera Powering ON Fast Blinking Blue Ready to Pair Slow Blinking Blue Pairing / Reconnecting Solid Blue Camera ON and Paired Fast Blinking Red & Blue Firmware Upgrade Standalone
(Add to the App) Ecosystem
(Add to a Recorder) Quickly remove the clear protective lm from the camera lens. Your camera can be set up 3 dierent ways:
a b Use the stand and place the camera on a at surface. Remove the stand and place the camera cube on a at surface. c Mount the camera using the camera stand and mounting hardware. Need Help?
We are here for you Our support site is lled with self-help material. From your support page you can use the Live Chat feature or contact our Live Phone support. 1. 2. Please visit Support.NightOwlSP.com Enter FWIP2 into the Search bar FCC RADIATION NORM FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Compliance Statement These limits are designed to provide reasonable protection against frequency interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed or used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in television reception, which can be determined by turning the equipment o and on. The user is encouraged to try and correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION!
The Federal Communications Commission warns the user that changes or modications to the unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment should be installed and operated with a minimum distance of 8 inches between the radiator and your body. 6 7 8 9 QSG-FWIP2-CM 2-091223 5 Whats Included Camera Details Download the Night Owl App Plug It In Quick Setup Guide Lets get started Indoor Camera with Mount USB Cable Microphone Status LED Speaker USB Lens Mounting Stand Reset Button microSD Card If you are a rst-time user, go ahead and download the Night Owl app. Quickly create an account and log in. Already have an account? Simply log in. Use the provided USB cable and power adapter to plug your camera into an outlet. Power Adapter Mounting Hardware NOTE: If mounting the camera, you will need a screwdriver or drill (not included). 2 3 4 5 NOTE: For initial setup/pairing, have your camera within 1 to 3 feet of your router or recorder.