Add your Camera MicroSD Card Status LED Guide Install the Camera To begin viewing your camera, add it to the Night Owl app or to a compatible recorder. For more detailed setup steps, scan the QR codes below. If using the camera as a standalone (no recorder), you will need to insert a microSD Card (up to 128GB) for video storage. LED Status Solid Red Camera Status Camera Powering ON Fast Blinking Blue Ready to Pair Slow Blinking Blue Pairing / Reconnecting Solid Blue Camera ON and Paired Fast Blinking Red & Blue Firmware Upgrade Your camera can be set up 2 dierent ways:
a Place the camera on a shelf or other at surface. b Use the provided mounting hardware to mount the camera to your wall or ceiling. Standalone
(Add to the App) Ecosystem
(Add to a Recorder) NOTE: With the camera powered on and connected to the Night Owl app, you can use the pan and tilt controls in the app to tilt the camera up to reveal the microSD Card insert. microSD Card sold separately. Need Help?
We are here for you Our support site is lled with self-help material. From your support page you can use the Live Chat feature or contact our Live Phone support. 1. 2. Please visit Support.NightOwlSP.com Enter FWIP2 into the Search bar FCC RADIATION NORM FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Compliance Statement These limits are designed to provide reasonable protection against frequency interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed or used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in television reception, which can be determined by turning the equipment o and on. The user is encouraged to try and correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION!
The Federal Communications Commission warns the user that changes or modications to the unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment should be installed and operated with a minimum distance of 8 inches between the radiator and your body. 6 7 8 9 QSG-FWIP3-CM 2-091223 5 Whats Included Camera Details Download the Night Owl App Plug It In Microphone Status LED Lens microSD Card If you are a rst-time user, go ahead and download the Night Owl app. Quickly create an account and log in. Already have an account? Simply log in. Use the provided USB cable and power adapter to plug your camera into an outlet. Quick Setup Guide Lets get started Indoor Pan and Tilt Camera USB Cable Power Adapter Mounting Hardware NOTE: If mounting the camera, you will need a screwdriver or drill (not included). Speaker Power Reset Wall Mount NOTE: For initial setup/pairing, have your camera within 1 to 3 feet of your router or recorder. 2 3 4 5