FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure To maintain compliance with FCCs RF Exposure guidelines, this equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. The device is going to be operated in 5150 to 5250 MHz frequency range. It is restricted only to indoor use. E N 1 E N 2 E N 3 E N Items Lenses Parameters 200 F3.2 fish-eye lenses Max. resolution of a still image from a single lens Max. resolution of video from single lens in 360 panoramic mode Max. resolution of video from a single lens in 360 3D mode 5280 x 3956 (In-camera stitched 360 at maximum of 11K, 3D or mono) 5280 x 2972 (Stitched 360 at maximum 11K mono) 4800 x 3072 (Stitched 360 at maximum 10K 3D) Compatible storage SD cards of standard V30 speed with exFat format Battery capacity Working Temperature Run time (full charge) Input Weight (with battery) Dimensions 135.36 Wh detachable lithium battery 0 ~ 40 1.2 h 19.5 V / 9 A Roughly 5.5 kg 228 mm 4 5 Connect and Control your Titan You can connect to your Titan via wire, WiFi or Insta360 Farsight. You can connect using an iPad, phone, or computer to control the camera. If you wish to connect via wire, you must use a network cable or local area network (LAN). It is strongly recommended that the camera be remotely controlled through Farsight, which has the most stable signal and the farthest communication distance. E N 5.1 Farsight Connection Farsight Overview LAN port Antenna port DC power port Power button Antenna port DC power port Power indicator
(Farsight Transmitter) Power button (ON/OFF) Antenna port Standard 1/4" mounting point LAN port Antenna port Wireless signal indicator
(Farsight Receiver) Micro-USB port 5 1 2 3 4 E N 6 5 1 2 3 E N 7 E N 1 2 3 1 2 3 8