FCC ID: 2A482-U2 Baseus Neckband Wireless Earphones

Bowie U2 User Manual Baseus Bowie U2 Neckband Wireless Earphones Please read this user manual carefully before use and keep it for future reference. K Baseus Bowie U2 Bowie U2

\128g+65g\60*100mm\

\\16P\ROHS PB3836Z-P0A0 2022.08.22 Baseus Bowie U2 APP CN Type-C 01

/ L or R

(L)1.5

(R)1.5

(L or R)

/ L or R 1.5 (L or R) 4 APP 1. APP 2. APP EQ 3. APP

- - - APP 02 03 SJ/T 11364 O GB/T 26572 X GB/T 26572 RoHS 2.0 2011/65/EU 5 1. 2. 3. 0~45 4. 5. 6. 7. 8. ) Baseus Bowie U2 ABS+PC+ +

V5.2 10 15 70%

L/R110mAh/0.407Wh 250mA DC5V 16mA 1.5 20Hz-20kHz Type-C

* Baseus 04

*1pcs

/ *4pcs

*1pcs

*1pcs

*1pcs 2012/19/EU 2006/66/EU Baseus Bowie U2 2014/53/EU 2011/65/EU www.baseus.com 05 EN Connection Steps Start up Initial start up, toggle the switch to ON, and the indicator flashes red and white quickly, meaning the earphones are ucder wireless pairing mode. Wireless connection Turn on the wireless on your phone to search and pair with the earphones. Select device modelBaseus Bowie U2 After successful connection, the indicator will go out. Download the app and link the earphones to it. Touch functional area Earphone indicator Mic Operation Instructions Music mode:

Play/Pause: Double-tap left or right earphone (L or R) Previous song: Tap and hold left earphone for 1.5s Next song: Tap and hold right earphone for 1.5s Activate voice assistant: Triple-tap left or right earphone (L or R) Call mode:

Answer/ hang up: Double-tap left or right earphone (L or R) Reject: Tap and hold left or right earphone (L or R) for 1.5s Power off Toggle the switch to OFF to turn off the earphones. 06 Power switch Type-C charging port Charging power indicator During charging: The indicator lights up red.Fully charged: The indicator lights up white. Restore to default settings When the earphones are powered on, disconnect the wireless connection of your phone. Long-tap both earphones at the same time for 4s, during which time the indicator will flash red for 3 times, meaning it's successful. 07 Tips for using the app and app security:

1. You can customize gestures in the app. 2. You can select EQ mode or customize it in the app. 3. You can switch to low latency mode in the app. Note: Go to Settings>App>App launch>Open manually Baseus app: Allow Auto-launch and secondary launch and running in background. Declaration on hazardous substances and elements contained in electronic products This form is compiled in accordance with SJ/T 11364. OIt indicates that the content of the harmful substance in all homogeneous materials of the component is below the limit specified in GB/T 26572 standard. X: The content of harmful substances in at least one homogeneous material of this part exceeds the limit stipulated in GB/T 26572 standard. This product complies with EU RoHS 2.0 Directive (2011/65/EU) Warm Tip: The 5-year icon refers to the "effective life of environmental protection", not the product quality assurance period. Electronic products all contain harmful substances such as lead, mercury and cadmium. Once they are overused, harmful substances may leak or mutate, cause pollution to the environment, or cause serious damage to people and property. The term of

"environmental protection use" means that all electronic products will be required to use within this effective period. We will no longer be responsible for the quality of the products due to the safety risks that arise after the safe use period. Product Safety Information Please read all instructions and warnings before using the product. Improper use of the product can easily cause damage to the product or may endanger personal and property safety. 1. This product contains batteries inside, so please avoid exposing the product to direct sunlight, electric heater or similar overheating environments. Do not store the product in high temperature, strong lighting and high-intensity magnetic field places. 2. Do not keep the product in harsh environments like nearby fire sources. Intense physical actions such as bashing, throwing, trampling on, squeezing, or putting into fire shall all be avoided. Do not use the product if is swelling. 3. The ambient temperature of the product is 0-45 . 4. Improper use of the product against this user manual or ignoring warnings can easily cause damage to the product or may endanger personal and property safety. Consumers shall bear all the consequences, to which our company will not assume any legal liability. 5. Dismantling of this product by non-professionals is strictly prohibited. Otherwise, it may cause a fire or damage the product. 6. Do not use a load (electrical appliances) that exceeds the output current of this product. A circuit protection mechanism is built-in to automatically stop working if loads exceed. 7. Please use a clean cotton cloth to clean the charging contacts of the earphones regularly to prevent it from failing to charge or turn 08 09 on caused by lack of cleaning. 8. Do not put this product in water (or washing machine). If water enters the product, let it dry naturally before using it. Product Specifications Name: Baseus Neckband Wireless Earphones Model No.: Baseus Bowie U2 Material: ABS+PC+metal+silicone Wireless Version: V5.2 Communication distance: 10m Music playing time: About 15 hours (volume at 70%) Battery capacity (L/R): 110mAh/0.407Wh (earphones)

*The above data are measured by the Baseus laboratory, the actual use will be slightly different depending on the specific circumstances. Earphone rated input: DC5V 250mA Earphone rated consumption current : 16mA Fully charging time: About 1.5 hours Frequency response range: 20 Hz-20 kHz Charge interface: Type-C Suitable for: Compatible with most of wireless devices Package Including Earphones*1pcs Ear tipLarge/Small*4pcs Charging cable *1pcs User manual *1pcs Warranty card *1pcs 10 Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with the provisions of Directive 2012/19/EU2006/66/EU. It is strictly forbidden to dispose of this equipment with ordinary trash; it must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment. It is hereby declared that Baseus Bowie U2 a product model of Shenzhen Baseus Technology Co., Ltd., complies with the provisions of Directive 2014/53/EU and Directive 2011/65/EU. The full text of the EC Declaration of Conformity can be found on the following website:

www.baseus.com 11 Warning FCC ID2A482-U2 2008B GB4943.1-2011 4000-712-711 www.baseus.com Manufacturer: Shenzhen Baseus Technology Co., Ltd. Add: 2th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen Hotline: +86-4000-712-711 Website: www.baseus.com PB3836Z-P0A0 XXXXX

\Designed by Baseus

\Made in China

C5266091_X10_Ed.2 Shenzhen Baseus Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 9/6/2022 Subject: Request for Confidentiality FCC ID: 2A482-U2 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No NOTE 1 NOTE 1 No No Short-Term Confidentiality NOTE 2 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 1/1 C5266091_X10_Ed.2 Sincerely, Signature:

Name: Zhang Mao Title: Certified Engineer 1/1

C5266091_X8_Ed.1 Letter of Authorization Company: Shenzhen Baseus Technology Co., Ltd. Address: 2th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen. Product Name: Baseus Neckband Wireless Earphones Model Number: Baseus Bowie U2 FCC Identifier: 2A482-U2 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Zhang Mao Date: 9/6/2022 Title: Certified Engineer Signature of applicant:

1/1