FCC ID: 2A482-PPCXM10B Power Bank

FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. CE Statement Herby, Shenzhen Baseus Technology Co., Ltd.declares that this Power Bank PPCXM10 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product allowed to be used in all EU member states. Use the Power Bank in the environment with the temperature between -10 and 40 Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Operation Frequency:112-205KHz ManufacturerShenzhen Baseus Technology Co., Ltd. Address 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,Gangtou Community, Bantian Street, Longgang District, Shenzhen. E-mail: [email protected] European agency Apex CE Specialists GmbH Habichtweg 1 41468 Neuss Germany DECLARATION OF CONFORMITY I hereby declare that the product Product:

Product Name: Power Bank Model: PPCXM10 Brand Name: baseus Hardware Version: V2.2 Software Version: EB269549 Accessories Battery information Model: H676076CH Specification: 3.7V, 5000mAh, 18.5Wh Manufacturer: Apex(WuXi)Co.,Ltd Battery information Model: 676076GH Specification: 3.7V, 5000mAh, 18.5Wh Manufacturer: EVE Energy Co.,Ltd satisfies all the technical regulations applicable to the product within the scope of Council Directives 2014/53/EU, 2014/35/EU and 2014/30/EU:and declare that the same application has not been lodged with any other notified body. EN 62479:2010 EN 62311:2020 ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 301 489-3 V2.1.1 (2019-03) ETSI EN 303 417 V1.1.1 (2017-09) EN 55032:2015+A11:2020+A1:2020 EN 55035:2017+A11:2020 EN 61000-3-2:2019+A1:2021 EN 61000-3-3:2013+A1:2019 EN 62368-1:2020+A11:2020 All essential radio test suites have been carried out. NOTIFIED BODY: MiCOM Labs Inc Address:

575 Boulder Court, Pleasanton, California94566 USA Identification Number: 2280 MANUFACTURER or AUTHORISED REPRESENTATIVE: Shenzhen Baseus Technology Co., Ltd. Address:

2nd Floor,Building B,Baseus Intelligence Park,No. 2008,Xuegang Rd,Gangtou Community,Bantian Street, Longgang District, Shenzhen, China This declaration is issued under the sole responsibility of the manufacturer and, if applicable, his authorised representative. Point of contact:

(Name, telephone and fax number) 2nd Floor,Building B,Baseus Intelligence Park,No. 2008,Xuegang Rd,Gangtou Community,Bantian Street, Longgang District, Shenzhen

(Place, date of issue) 2024/01/9

(Signature) Zhang Mao / Certified Engineer

(Name and title in block letters)

ey LS RAL (III SILI PIL ol oc Oo&F OF OG O09 o2 O08 os Q \. o* iN HAA AA RRR NAVAN 05 09 oz og o6 OOL o1 oz oF SV YS OB Lippitt cee HiT TELELELLEL AAA Se

Shenzhen Baseus Technology Co., Ltd. Section 2.911(d)(5)(i) Certification Equipment Type Company name: Shenzhen Baseus Technology Co., Ltd. Address: 2nd Floor,Building B,Baseus Intelligence Park,No. 2008,Xuegang Rd,Gangtou Community,Bantian Street, Longgang District, Shenzhen Product Name: Power Bank FCC ID: 2A482-PPCXM10B Model(s): PPCXM10 2.911(d)(5)(i) Equipment Type We, [Shenzhen Baseus Technology Co., Ltd.] (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name:

Zhang Mao Date: 2024.1.9 Title and Company name:

Certified Engineer / Shenzhen Baseus Technology Co., Ltd. NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Shenzhen Baseus Technology Co., Ltd. Section 2.911(d)(5)(ii) Certification Applicant (Covered List

) Company name: Shenzhen Baseus Technology Co., Ltd. Address: 2nd Floor,Building B,Baseus Intelligence Park,No. 2008,Xuegang Rd,Gangtou Community,Bantian Street, Longgang District, Shenzhen Product Name: Power Bank FCC ID: 2A482-PPCXM10B Model(s): PPCXM10 2.911(d)(5)(ii) Applicant filing We, [Shenzhen Baseus Technology Co., Ltd.] (the applicant) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name:

Zhang Mao Date: 2024.1.9 Title and Company name:

Certified Engineer / Shenzhen Baseus Technology Co., Ltd. NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.2

Attestation Statements

(2023.12.21) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for 2A482-PPCXM10B

(Shenzhen Baseus Technology Co., Ltd.), the undersigned, hereby authorize (Oasis-

Compliance) to act as our designated U.S. agent for service of process, (Shenzhen Baseus Technology Co., Ltd.) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment.

(Oasis-Compliance) accepts the responsibility to act as designated U.S. agent for service of process. Applicant Information Company name: Shenzhen Baseus Technology Co., Ltd. Contact Name: Zhang Mao FRN: 0032035966 Address: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen. Telephone No: +86-18818848769 Email: [email protected] Signature

[name]

U.S. Agent Information:

Company Name: Oasis-Compliance Address: 3313 Verdi Dr,San Jose,CA 95111 FRN:0033464157 Contact Name:James He Telephone No: (202) 602-8330 Email: [email protected] Signature

[name]

Shenzhen Baseus Technology Co., Ltd. Authorization Company: Shenzhen Baseus Technology Co., Ltd. Address: 2nd Floor,Building B,Baseus Intelligence Park,No. 2008,Xuegang Rd,Gangtou Community,Bantian Street, Longgang District, Shenzhen Product Name: Power Bank Model Number(s): PPCXM10 Product Description: Power Bank We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Zhang Mao Title:

Certified Engineer Company: Shenzhen Baseus Technology Co., Ltd. Date: 2024/01.09

Shenzhen Baseus Technology Co., Ltd. Model Difference 2024.01.09 EUT NAME: Power Bank FCC ID: 2A482-PPCXM10B MODEL : PPCXM10 The product uses two different battery models, the difference in the battery model, the difference in the manufacturer and model, and the other motherboards are the same H676076CH 676076GH address No.500 XiShan Boulevard XiShan District,WuXi,China Model H676076 CH 676076G H Manufacturer Apex(WuXi)Co., Ltd EVE Energy Co.,Ltd Sincerely Clients signature Clients name / title : Zhang Mao / Certified Engineer Contact information / address: 2nd Floor,Building B,Baseus Intelligence Park,No. 2008,Xuegang Rd,Gangtou Community,Bantian Street, Longgang District, Shenzhen

Shenzhen Baseus Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2A482-PPCXM10B Date: 2024/01.09 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Zhang Mao Title: Certified Engineer