FCC ID: 2A4GJ-W3 WiFi camera

User instruction Thank you for purchasing our product,We are customer oriented company and strive to provide an outstanding customer care service. Any question or issue, please contact us and well answer all your product related questions and solve any arising issues promptly and accurately,If you need more information, please go to the website:www.pnzeo.com

.key function and indicator status description The blue indicator light is the recording indicator: recording -> blue light flashes slowly; stop recording >Steady blue light The red light is the WIFI working light. The specific mode is as follows:

1. Point to Point mode: red lamp flashing slowly 2. Remote mode: Steady red 3. Remote is not connected to the network: Red flash quickly The indicator light can be turned off/on in the APP Description of button: ON is power on or off key;

O is taking photos key. M is video Recording and reset key, it starts to record by pressing it slightly for 1 second, the blue lamp will flash slowly while recording, it stops recording by pressing it slightly for 1 second, then blue lamp will be bright constantly;

RESET,under the condition of power on, press M key about 5s,camera will automatically reset and reboot Notice: This reset must be done after the camera is started (ie the red light is flashing or slow flashing).

,Install APP

"minicam" and install it. IOS devices: Please search the APP Store for the app named Android devices: Please search the Google Play for the app named "minicam" and install it;

Or use your mobile browser to scan the QR code and select

"Download APK" to download and install the app. Appears on the phone after installation

, Mobile devices is connected to the camera in a point-to-point way First of all, you need to turn the camera on ( It takes about 40s to finish booting. Note:If the red lamp flashes quickly or Steady red after boot, reset the camera first(Hold down the "M" key about 5s then camera will automatically reset and reboot),then open the "WLAN" area of the settings on your Phone ,then you find the camera'WiFi signal and

(i.e. UID number of connect camera,which is unique to every camera), as shown in figure . the Phone to camera' WiFi signal

(Step 1)Open phones settings

(Step 2)Open Wireless../WLAN

(Step 3)Connect cameras wifi Then open the mobile APP (minicam),The new device will pop up automatically as shown below. Click OK and the new camera will be automatically added to the list.

(Step 4)Select CONNECT

(Step 5)Open minicam

(Step 6)Select OK Click online camera to watch the video. If you need remote monitoring, set the camera up connect to WiFi. Set the camera connect to WiFi In the point-to-point connection mode and the camera is online, click in the lower right corner of the camera to go in the setting list. Then go in "Network Configuration", select your home WIFI name, in the upper right corner or input the WiFi password, and then click

"confirm" at the bottom. After click Confirm or

, the camera will restart automatically ( takes about 1 minute). After the camera restarts, click to refresh the connection, or exit the APP and re-open the APP. When the camera displays Online, the remote setting is successful, as shown in the following figure:

. APP controls camera recording (storage to memory card) When the "online" state of the camera, click go in the settings page, then go in "TF card set" (please insert TF card first), select the recording mode according to your needs, and then click or "confirm" in the upper right corner. As shown below:

. Motion detection alarm setting When the "online" state of the camera, click go in the settings page,Please choose whether you need "alarm push",Then go in Motion Detection Setand click Motion Detection. You can turn on motion detection (with high, med, low and min 4th gears) and "Close"

motion detection. After turning on motion detection, You can choose whether to open "Picture FTP upload after alarm" and "Video FTP upload after alarm", then click or "confirm" in the upper right corner. As shown below:

. Look over/play back files on the memory card online When the "online" state of the camera,Click in the lower left corner of the camera to go in the file list, click on any single file, you can play or download to "local file".

,Look over local files Open the app, click on in the upper left corner, then go in "Local Files" to

"view" the videos and photos stored in the app.If you have a new camera that needs to be added manually, you can go in "Add Device" to add it.

,Set your own password for your camera For your privacy, the online camera will prompt you to change your password, please handle it according to your needs,The original password of the camera is 8888 If you forget the password you set, please reset the camera to restore it to the original password 8888.

,Icon function on the video page

Listen to the camera's sound / real-time monitoring resolution Take a snapshot/recorded video stored in the phone app "local file"

Horizontal/vertical flip image

Adjust brightness/contrast Night vision switch / indicator switch Icon function on the main page View memory card files Motion detection report Add devices and view local files Go in settings

. Specification parameters Image sensor Resolution Video format Frame number Minimal illumination Compression format CMOS 1080P/720P/640P MP4 20-25fps 1LUX H.264 Power consumption 350MA/h Working temperature

-10-60 degrees centigrade Working humidity 15-85%RH Type of memory card Support 16G-128G Micro SD (TF card) Operating voltage DC-5V VLCPlayer/SMPlayer Android/iOS Play software Mobile OS XIII: FAQ 1.Unsmooth remote monitoring: please select proper definition according to current network environment 2. SD card video is not smooth when watched remotely using the APP:

As the mobile has a limited decoding capacity, you can adjust definition of the equipment recording as fit for own mobile. 3.Forget the password or show wrong password: Please reset the camera to restore the default password 8888. Special tips:

1.If the network environment is changed, Please reset the camera first, then set the camera to connect to WiFi. 2.If the camera fails to read the memory card, please Format the memory card or replace the memory card. 3. Before shutting down the camera, please first stop recording lest the last length of video be lost or damaged due to not saving;

4.The camera will have some fever during work. Please make sure that the camera's heat vents work. Note:The pictures in this manual are from Android mobile phones, and may be different from those displayed on your mobile phone. Please refer to the actual situation and strictly follow the steps in the manual. This is a device installed in a fixed position. Please refer to the following figure for installation. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on

, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC RF exposure statement:

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body

C5266091_X10_Ed.1 Shenzhen Benze Technology Co., LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 5/11/2022 Subject: Request for Confidentiality FCC ID: 2A4GJ-W3 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No No Short-Term Confidentiality No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: WENBING CHEN Title: General manager Date: 5/11/2022 1/1

C5266091_X8_Ed.1 Letter of Authorization Company: Shenzhen Benze Technology Co., LTD Address: GUANG DONG SHENG ZHEN Longhuaqu guanhujiedao luhushequ guanshengwulu yingfeihaochengkejiyuan 1003 Product Name: WiFi camera Model Number: W3, W2, W5, W6, W7, W8, W9, W10, W11, W12, V1, V2, V3, V5, V6, V7, V8, V9, V10, V11, V12 FCC Identifier: 2A4GJ-W3 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: WENBING CHEN Date: 4/26/2022 Title: General manager Signature of applicant:

1/1

Shenzhen Benze Technology Co., LTD Model difference statement Product Name: WiFi camera Model No.: W3, W2, W5, W6, W7, W8, W9, W10, W11, W12, V1, V2, V3, V5, V6, V7, V8, V9, V10, V11, V12 We (Shenzhen Benze Technology Co., LTD., GUANG DONG SHENG ZHEN Longhuaqu guanhujiedao luhushequ guanshengwulu yingfeihaochengkejiyuan 1003) hereby state that all the models are the same circuit and RF module, except the model name. Signature:

Name: WENBING CHEN Title: General manager Tel: 15814784831 Email: z480c@qq.com Date: 4.26.2022