|
app
s
|
Applicant Information
|
|
|
1 2 3
|
Effective |
2024-04-24
|
|
1 2 3
|
Applicant's complete, legal business name |
ShenZhen BiLian Electronic Co.,Ltd.
|
|
1 2 3
|
FCC Registration Number (FRN) |
0026535013
|
|
1 2 3
|
Physical Address |
Room 501,Building 3,No.32,Dafu Road, Zhangge Community,FuchengStreet,Longhua District
|
|
1 2 3
|
Room 501,Building 3,No.32,Dafu Road
|
|
1 2 3
|
Shenzhen, N/A
|
|
1 2 3
|
China
|
|
|
app
s
|
TCB Information
|
|
1 2 3
|
TCB Application Email Address |
c******@micomlabs.com
|
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3
|
Grantee Code |
2AL6K
|
|
1 2 3
|
Equipment Product Code |
BL-M8852BS2
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3
|
Name |
H******** D******
|
|
1 2 3
|
Title |
manager
|
|
1 2 3
|
Telephone Number |
18118********
|
|
1 2 3
|
Fax Number |
0755-********
|
|
1 2 3
|
E-mail |
r******@b-link.net.cn
|
|
|
app
s
|
Technical Contact
|
|
1 2 3
|
Firm Name |
ShenZhen BiLian Electronic Co.,Ltd.
|
|
1 2 3
|
Physical Address |
China
|
|
1 2 3
|
E-mail |
r******@b-link.net.cn
|
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 | DTS - Digital Transmission System |
| 1 2 3 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11a/b/g/n/ac/ax 1200Mbps WLAN + Bluetooth v5.2 Combo SDIO Module |
| 1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 | Purpose / Application is for | Original Equipment |
| 1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 | Grant Comments | Single Modular Approval.
Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing.
OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.
The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| 1 2 3 | Single Modular Approval.
Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing.
OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.
The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| 1 2 3 | Single Modular Approval.
Output power listed is conducted power.
OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.
The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| 1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3
|
Firm Name |
Shenzhen ZKT Technology Co., Ltd.
|
|
1 2 3
|
Name |
L**** X****
|
|
1 2 3
|
Telephone Number |
0086-********
|
|
1 2 3
|
E-mail |
z******@zkt-lab.com
|
|