BL-M8189ME1(ETV) 802.11b/g/n 150Mbps 1T1R WiFi SDIO Module SHENZHEN BILIAN ELECTRONIC CO., LTD Add: 10~11/F, Building 1A, Huaqiang idea park, Guangming district, Shenzhen. Guangdong, China Web: www.b-link.net.cn Module Name: BL-M8189ME1 Module Type: 802.11b/g/n 150Mbps 1T1R WiFi SDIO Module TOP Date:
Date:
Revision: V1.2 Customer Approval:
Company:
Title:
Signature:
Title:
Signature:
BL-link Approval:
Revision History Revision Summary 1.0 1.1 Initial release Official release Release Date 2015.09.15 2021.04.24 1 http://www.b-link.net.cn 1. Introduction BL-R8189ME1 product Accord with FCC CE and is 150M wireless SDIO adapter which has lower power consumption, high linearity output power, accords with IEEE802.11B/G/N, and supports IEEE802.11i safety protocol, along with IEEE 802.11e standard service quality. It connects with other wireless device which accorded with these standards together, supports the new data encryption on 64/128 bit WEP and safety mechanism on WPA-PSK/WPA2-PSK, WPA/WPA2.IIts easy and convenient to link to wireless network for the users using desktop, laptop and other device that needs connect to wireless network. 1.1 Features Operating Frequencies: 2.4~2.484GHz Host Interface is SDIO 2.0 IEEE Standards: IEEE 802.11b/g/n Wireless data rate can reach up to 150Mbps Connect to external antenna through half hole pad I/O power supply) 1.2 Block Diagram Power Supply: 3.30.2V main power supply; 3.30.2V or 1.80.1V for VDIO (SDIO and Digital 2 http://www.b-link.net.cn 1.3 General Specifications Module Name BL-M8189ME1 WiFi Module Chipset RTL8189ETV -CG WiFi Standards IEEE802.11b/g/n/, 1T1R, 2.4GHz, 150Mbps (Max) Host Interface SDIO 2.0 Antenna Connect to the external antennas through half hole pad Dimension SMD 44Pins, 12*12*1.5mm (L*W*H) Power Supply DC 3.30.2V(main power) @ 350 mA (Max) DC 3.30.2V or 1.80.1V(SDIO and Digital I/O power) Operation Temperature
-20 to +45 Operation Humidity 10% to 95% RH (Non-Condensing) Storage Temperature
-40 to +85 Storage Humidity 10% to 95% RH (Non-Condensing) 2. Pin Assignments No Pin Name Type Description Supply Top view 2.1 Pin Definition GND RF GND P O P Ground WLAN RF pad Ground 1 2 3 3 http://www.b-link.net.cn 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 4 VBAT VDD3.3V WL_REG_ON Power down select, pull high for use WLAN to wake-up HOST, pull high for use I/O SDIO data 2 I/O SDIO data 3 /GSPI chip select SD_CMD I/O SDIO command/GSPI data input SD_CLK I SDIO clock /GSPI clock I/O SDIO data 0 /GSPI data output I/O SDIO data 1 /GSPI data out VDIOSDIO VDIO for SDIO pin, the power supply is same as the signal level of SDIO bus. Base on platform to choose 3.3V or 1.8V.. NC NC NC NC NC NC NC WAKE SD_D2 SD_D3 SD_D0 SD_D1 GND NC NC NC NC NC NC NC NC NC GND NC GND NC NC GND NC
P
I O P
P
P
P
P
NC NC NC NC NC NC NC Ground NC NC NC NC NC NC NC NC NC NC NC NC NC Ground Ground Ground http://www.b-link.net.cn 38 39 40 41 42 43 44 NC NC NC NC NC NC GND
P
NC NC NC NC NC NC Ground P: Power, I: Input, O: Output, I/O: In/Output, RF: Analog RF Port 3. Electrical and Thermal Specifications 3.1 Recommended Operating Conditions Parameters Min Typ Max Units Ambient Operating Temperature External Antenna VSWR Supply Voltage VDD33 VDIO(1.8V) 0 1 3.1 1.7 25 1.92 3.3 1.8 50 2.5 3.5 2.0
V V 3.2 Current Consumption Conditions : VDD33=3.3V ; Ta:25 Use Case 2.4G 11Mbps TX (RF-Test) 2.4G 11Mbps RX (RF-Test) 2.4G 54Mbps TX (RF-Test) 2.4G 54Mbps RX (RF-Test) 2.4G MCS7(HT40) TX (RF-Test) 2.4G MCS7(HT40) RX (RF-Test) VDD33 Current (average) Typ Max Units 315 170 230 178 220 182 340 177 305 184 295 190 mA mA mA mA mA mA 5 http://www.b-link.net.cn 4. WiFi RF Specifications 4.1 2.4G WiFi RF Specification Conditions : VDD33=3.3V ; Ta:25 Features Description WLAN Standard IEEE 802.11b/g/n Frequency Range 2.4~2.484GHz (2.4GHz ISM Band) Channels Ch1~Ch14 (For 20MHz Channels) Modulation 802.11g (OFDM): BPSK, QPSK, 16QAM, 64QAM;
802.11b (DSSS): DBPSK, DQPSK, CCK;
802.11n (OFDM): BPSK, QPSK, 16QAM, 64QAM;
802.11b: 1, 2, 5.5, 11Mbps;
802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps;
802.11n (HT20): MCS0~MCS7(1T1R_SISO) 6.5~72.2Mbps;
802.11n (HT40): MCS0~MCS7(1T1R_SISO) 13.5~150Mbps;
Date Rate Frequency Tolerance 15ppm 2.4G Transmitter Specifications TX Rate TX Power TX Power Tolerance EVM 2.4G Receiver Specifications RX Rate Min Input Level(Typ) Max Input Level(Typ) 802.11b@1Mbps 802.11b@11Mbps 802.11g@6Mbps 802.11g@54Mbps 802.11n@HT20_MCS0 802.11n@HT20_MCS7 802.11n@HT40_MCS0 802.11n@HT40_MCS7 802.11b@1Mbps 802.11b@11Mbps 802.11g@6Mbps 802.11g@54Mbps 802.11n@HT20_MCS0 802.11n@HT20_MCS7 802.11n@HT40_MCS0 802.11n@HT40_MCS7 17dBm 17dBm 14dBm 14dBm 13dBm 13dBm 13dBm 13dBm
-92dBm
-86dBm
-88dBm
-72dBm
-88dBm
-67dBm
-86dBm
-65dBm 1.5dBm 1.5dBm 1.5dBm 1.5dBm 1.5dBm 1.5dBm 1.5dBm 1.5dBm
-10dBm
-10dBm
-15dBm
-15dBm
-15dBm
-15dBm
-15dBm
-15dBm
-10dB
-10dB
-10dB
-25dB
-10dB
-28dB
-10dB
-28dB PER
< 8%
< 8%
< 10%
< 10%
< 10%
< 10%
< 10%
< 10%
6 http://www.b-link.net.cn 5. Mechanical Specifications 5.1 Module Outline Drawing Module dimension: 12.0*12.0*1.5mm (L*W*H; Tolerance: 0.15mm) Module Bow and Twist0.1mm 7 http://www.b-link.net.cn 5.2 Mechanical Dimensions 6. Application Information 6.1 Typical Application Circuit 8 http://www.b-link.net.cn 6.2 Recommend PCB Layout Footprint Design size mm Top View 9 http://www.b-link.net.cn 6.3 Reflow Soldering Standard Conditions Please use the reflow within 2 times. Set up the highest temperature within 250. 7. Key Components Of Module No. Parts Specification Manufacturer Note 1 Chipset RTL8189ETV-CG Realtek 2 PCB BL-M8189ME1 3 Crystal 26MHz-9pF-10ppm-3225 Shenzhen Tie Fa Technology limited Guangdong KINGSHINE ELECTRONICS CO., LTD Quzhou Sunlord Electronics Co., Ltd SHENZHEN KAIYUEXIANG ELECTRONICS CO., LTD HARMONY ELECTRONICS CORP. HOSONIC ELECTRONIC CO., LTD. UN Semiconductor Co., Ltd 10 http://www.b-link.net.cn 8. Package and Storage Information 8.1 Package Dimensions Package specification:
1. 2,000 modules per roll and 10,000 modules per box. 2. Outer box size: 37.5*36*29cm. 3. The diameter of the blue environment-friendly rubber plate is 13 inches, with a total thickness of 25.3mm (with a width of 21.3mm carrying belt). 4. Put 1 package of dry agent (20g) and humidity card in each anti-static vacuum bag. 5. Each carton is packed with 5 boxes. 11 http://www.b-link.net.cn 8.2 Storage Conditions Absolute Maximum Ratings:
Storage temperature: -45 to +85 Storage humidity: 10% to 95% RHNon-Condensing Recommended Storage Conditions:
Storage temperature: 5 to +40 Storage humidity: 20% to 90% RH Please use this Module within 12month after vacuum-packaged. The Module shall be stored without opening the packing. After the packing opened, the Module shall be used within 72hours. When the color of the humidity indicator in the packing changed, the Module shall be baked before soldering. Baking condition: 60, 24hours, 1time. ESD Sensitivity The Module is a static-sensitive electronic device. Do not operate or store near strong electrostatic fields. Take proper ESD precautions!
12 http://www.b-link.net.cn FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) thi s device may not cause harmful interference, and (2) this device must accept any interference received, incl uding interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursua nt to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inte rference in a residential installation. This equipment generates uses and can radiate radio frequency energy a nd, if not installed and used in accordance with the instructions, may cause harmful interference to radio com munications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turn ing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help important announcement Important Note:
Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/Canada. This device is intended only for OEM integrators under the following conditions:
1. The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2. The transmitter module may not be co-located with any other transmitter or antenna, 3. For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. (if modular only test Channel 1-11) As long as the three conditions above are met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Important Note:
In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling The final end product must be labeled in a visible area with the following" Contains FCC ID: 2AL6KBL-
R8189ME1"
Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules CFR 47 FCC PART 15 SUBPART C has been investigated. It is applicable to the modular transmitter 2.3 Specific operational use conditions This module is stand-alone modular. If the end product will involve the Multiple simultaneously transmitting condition or different operational conditions for a stand-alone modular transmitter in a host, host manufacturer have to consult with module manufacturer for the installation method in end system. 2.4 Limited module procedures This module is Limited single modular without shielding, host manufacturer have to consult with module manufacturer for the module limiting conditions when integrate the module in the host. module manufacturer should reviews detailed test data or host designs prior to giving the host manufacturer approval. 2.5 Trace antenna designs Not applicable 2.6 RF exposure considerations This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 2.7 Antennas This radio transmitter 2AL6KBL-R8189ME1 has been approved by Federal Communications Commission to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Model Type Connector 2400-2483.5 MHz External Antenna
2400-2483.5 MHz 2.0dBi 5150-5250 MHz
Peak gain ( dBi ) 5250-5350 MHz
5470-5725 MHz
5725-5850 MHz
Information 2.8 Label and compliance information The final end product must be labeled in a visible area with the following" Contains FCC ID:2AL6KBL-R8189ME1". requirements modes 2.9 Host manufacturer is strongly recommended to confirm compliance with FCC requirements for the transmitter when the module is installed in the host. 2.10 Additional testing, Part 15 Subpart B disclaimer Host manufacturer is responsible for compliance of the host system with module installed with all other applicable requirements for the system such as Part 15 B. additional testing and test on