Product Use Description 1.Mobile search namei9_5.0 Press the button on the charging box, the blue light is always on, open the cover and take out the left and right earphones.Search for : i9_5.0 connection, pairing time is 5 minutes under no mobie phone connection, it will power off when time out. Play music mode: click either side of the button and press play pause;
R double click: next song/triple click: volume plus;
L double click: last song/triple click: volume reduction;
call mode: click short press to answer hang up long press to refuse to answer the phone;
Long press on Siri (after startup, short press stop Siri). Put the earphone into the charging box and charge it automatically. Buttons MIC Buttons MIC Buttons Charging box indicator light 3.Buttons function operation instruction Long press the on and off function, The blue light flashes three times when it is turned on. The red light flashes three times when it is turned off. Every 5 seconds flash after the bluetooth connected. Long press any side earphone for about 4 seconds, the earphones power off. Connectionless state: press either side of the button. Double-click to enter TWS formation state.Red and blue lights flicker alternately, stop flashing after the connection is completed, and the red and blue lights go out;
Long press for 4 seconds under power off status, release your hands after booting, then enter single-ear connection mode 2.Headphone/charging compartment indicator light Headset charging status, red light is always on, full of electricity, blue light is always on for 3 seconds with Or go out. The blue light in the charging bin is on all the time, charging the headset. Charge with charging box, the red light flashes. the red light is always on when full charge. Press the button of the charging bin to test whether the battery in the charging bin has power. The blue light indicates that the charging bin has power; otherwise, it indicates that there is no power in the charging bin. Charging voltage of charging bin:
USB charging for headset, input 4.5v ~ 5.5v. charging port During charging,the red light flickered and the full power red light was always on FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the users authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.