FCC ID: 2AXTH-X1PRO Wireless charger car holder

X1PRO Dual Coil Version Package Direction for use Wireless charger Air vent mount

*1 Type-C cable User manual

*1

*1

*1 Functional component Specications Product name: Wireless car charger holder Model name:X1PRO Input: 5V/2A MAX9V/2A MAX Output: 15W(compatible with 10W,7.5W,5W) Induction distance:6mm Applicable mobile phone size: 4.7-6.9 inch mobile phone 1. Assemble the product and any accessory through a ball head nut and tighten it (compatible with other ball head diameter 17mm accessories), and fix it in an ideal position. Connect the product to the QC3.0 car charger (optional) with the data cable, and insert to the cigarette lighter to get electricity. 2.After the product is powered on, the indicator on the both side will light, and the left and right telescopic arms will automatically open after 5 seconds to wait for the mobile phone to be placed; if the product does not turn on red after power on

(not turn on, or flash ) All indicate that there is a problem with the product, please stop using it and return it to the seller for processing. 3. In order to ensure the efficiency and stability of charging, adjust the bottom bracket to the lowest position before putting on the Samsung Galaxy Z Flip phone, so that the coil of the phone can be perfectly aligned with the lower charging coil of the holder; Other mobile phones with wireless charging function can also use this stand to charge, try to make the back center position be aligned with the circle of the bracket panel as much as possible. Mobile phones of different sizes should correspond to different bracket gears. The best distance for wireless charging is within 3~5mm and cannot penetrate metal, so avoid using metallic or too thick (more than 3mm) mobile phone cases, so as to ensure the fast wireless charging. 4. After placing the phone, the left and right clamping arms will automatically clamp the phone. If the phone supports QI wireless charging protocol, the product will start wireless charging at the same time, and the indicator light will flash slowly when the product wireless charging starts; if the phone does not support wireless charging, the indicator light will flash quickly for 5 seconds and then the light goes out. The maximum charging power of this product is 15W, and the charging efficiency will vary according to the charging environment and mobile phone. 5. Ways to take off the mobile phone: The 1st way: when the power is on, press the mechanical side buttons, the clamp arms will open automatically, remove the mobile phone, and the arms stay open; The 2nd way: press the side buttons when the power is off, with a built-in supercapacitor, the clamp arms open automatically, then remove the mobile phone, the clamp arms remain open. Air vent mount Adjust the position of the top piece of the air outlet and the rotatable clip assembly according to the position of the air outlet blade; insert the blade and select the lock switch position according to the thickness of the blade; suitable for one-key locking of the air outlet of most cars. Silicone touches the car, tighter and fits better to protect the car from scratches. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC WPT exposure statement:

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body. Precautions 1. Do not use the product in the car at a temperature above 60 degrees. 2.Do not use this product in professional racing or extreme off-road driving. The guarantee Products three guarantees valid time:From purchasing date (Prevail to the customer receipt date or invoice date),provide 12 months guarantee.Prod-

uct surface man-made damage,acces sories missed are not include in this guarantee.We can also provide the service for you for the product is out of surface or doesnt include in this charge.guarantee,but you need to pay the repair charge.

Label Size: 34*22*0.15MM Wireless charger car holder Model: X1RRO Rating Input: 5V2A, 9V2A FCC ID: 2AXTH-X1PRO Shenzhen Caibo Technology Co., Ltd F4, Building 30, Fifth Industrial Zone, Huaide Cuigang Industrial Park, Fu Yong, Bao'an District, Shenzhen China. Importer: xxxx Address : xxxx Location

Shenzhen Caibo Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2AXTH-X1PRO To Whom It May Concern, C5266091_X10_Ed.1 Date: 9/27/2022 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No Short-Term Confidentiality No No No No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Linjun Hu Date: 9/27/2022 Title: CEO 1/1

Shenzhen Caibo Technology Co., Ltd. Model difference statement Product Name: Wireless charger car holder Model No.: X1PRO, X1S We (Shenzhen Caibo Technology Co., Ltd., F4, Building 30, Fifth Industrial Zone, Huaide Cuigang Industrial Park, Fu Yong, Bao'an District, Shenzhen China.) hereby state that all the models are the same circuit and module, except the model name. Signature:

Name: Linjun Hu Title: CEO Tel: 13713719057 Email: 39600793@qq.com Date: 9.27.2022

C5266091_X8_Ed.1 Letter of Authorization Company: Shenzhen Caibo Technology Co., Ltd. Address: F4, Building 30, Fifth Industrial Zone, Huaide Cuigang Industrial Park, Fu Yong, Bao'an District, Shenzhen China. Product Name: Wireless charger car holder Model Number: X1PRO, X1S FCC Identifier: 2AXTH-X1PRO We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Linjun Hu Date: 9/27/2022 Title: CEO Signature of applicant:

1/1