| all | frequencies |
|
|
|
|
exhibits | applications |
|---|---|---|---|---|---|---|---|
| manual | photos | label | |||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
User Manual | Users Manual | 981.05 KiB | May 08 2019 | |||
| 1 |
|
Internal Photos | Internal Photos | 562.34 KiB | May 08 2019 | |||
| 1 |
|
External Photos | External Photos | 257.90 KiB | May 08 2019 | |||
| 1 |
|
Label | ID Label/Location Info | 46.25 KiB | May 08 2019 | |||
| 1 |
|
Agent Authorization Letter | Cover Letter(s) | 23.13 KiB | May 08 2019 | |||
| 1 | Block Diagram | Block Diagram | August 05 2019 | confidential | ||||
| 1 |
|
Long Term Confidentiality Request Letter | Cover Letter(s) | 22.74 KiB | May 08 2019 | |||
| 1 |
|
Model Difference | Cover Letter(s) | 20.05 KiB | May 08 2019 | |||
| 1 | Operating instructions | Operational Description | August 05 2019 | confidential | ||||
| 1 |
|
RF Exposure | RF Exposure Info | 105.77 KiB | May 08 2019 | |||
| 1 | Schematics | Schematics | August 05 2019 | confidential | ||||
| 1 | Software Security Requirements | SDR Software/Security Inf | August 05 2019 | confidential | ||||
| 1 |
|
Test Setup Photos | Test Setup Photos | 248.71 KiB | May 08 2019 | |||
| 1 |
|
Test report | Test Report | 4.60 MiB | May 08 2019 |
| 1 | User Manual | Users Manual | 981.05 KiB | May 08 2019 |
Plug m your wextender The 2 lights on the right will be on e;optExtendef'. Abnnal. holeon the bottom Pss"res of the product for Bs with paperclip,or contact seller 0I ., .. wlft 5g NOTE. Younnot surf the Inmetuntill
.J you finish allesettingsps, C pis continue 2 3
.
... :]) 3 ..
. . 3)
"l.!
,
{I 11:
11 Plug in your wextender WireeSS-
The2 lightson .ht Ender"
will beonpith
&ange Ecler Abnrmal Pressset"hole fthe product perclip on the bottom for 8s with rcondseller
. 1 J
*NOTE bunnot Surf the Internet youishall the setting sps, pis continue Route.8111146
....O>
hom
.XX unt,11 wlSaxxxx
.oi W Ndwcr\:tndst..
.... av, 4 Wtret.ess Range Eender Mobile l 2.4G/5G j phone setup Sign in to management page
(Google Chrome&Mozilla Firefoxcommended) NOTE:
Pis make suthatyou have con need the SSID(wlftXXXX) of the wifitendersuccelly,mof the PC/smart willni20and Sign in totmanagent page automatically. II not,pls 192.168.188.1 enter on the new browser. Enter the default password:admin REPEATER
...ad min Scan and select your h strouter SSID
..seltctthemalnl'Olltetobeelllendecl ChinaNet 5BC8 0!l
<;, ITV58C8 Five rJ 12n Sign in to management page
(Google ChromeMozilla C O Firefoxecommended) NOTE:
Pis make sure tnatuhave connected the SSID(wlflSgxxxx) of the sccesslully,most wifi extender of the PC/smart will ren1ze and Sign in to the management page automally. If not,pls r192.8.188.1 on the new bav e Google e-
Enter the password of your host router Set your Extender SSID and password Check details and make a note of the WireleInfo PmakesuoftheightI 11:
I A...... NOTE:
mors(special characte not alwed,hke
%
I L z
.... d 2ro p1 W-Na... DenSSIO, - ,ohowln pro-2 4G 24M wpro5G
"--soh Th<dofndernarT P isXe ultmu m M L,!H'.>$1'!ot.lerNom,, how UC Nhl-pro-.4G
.cal:0123311
.. !m ifi-pn, When younishedsetting,pls until extender light wait 30-40s is on C Reconnect your extender wifi Aa ft"'!!juccmpkd,pl... IICteoad\
. ffcaCSC-pro oa.lld eugnalmcmto<.lf-hy,t>m>thai!KHeloy oa n wh Ff Zm Enter the passwo fy urhost router NOTE Pis makesufthe right characte password(special not allowed,like
%
E When you finished unlextender light is on. setting.pis wait 30-40s A ....... p..... ob. :uilmdtat..-Urtbj11. ...... CSC-pro,oa.... berw,,ercc-.
.. ncc:cam w o s h n F Enter the default password:admin Snarlectyour horouter SSID I Logm i
-1!+111-
lentChnels wong together would inlerfesignal, and the nevorkspeed will g slow. Please change the main outerchannel in lime Set youExtender SSID and password Check deilsand make a note of the Wireless Info Hpaad1rwirl'lssp1 d
.... :0000po<>"'O<d}
Thod<f. m s
.... 1
.1. 11
,1-,-
aah<IWII
"-... , . m
;::Jllm Reconnect your extender wifi II"""""
o s h w A wohcs U E
\,{!rel. JI.Bo,J,lo-
h
......_ F F U h
........ h F h
........ FCCCaution Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothe followingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2) thisdevicemustacceptanyinterferencereceived,includinginterferencethatmay causeundesiredoperation. AnyChangesormodificationsnotexpresslyapprovedbythepartyresponsiblefor compliancecouldvoidtheuser'sauthoritytooperatetheequipment. Note: ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClass Bdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedto providereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation. Thisequipmentgeneratesusesandcanradiateradiofrequencyenergyand,ifnot installedandusedinaccordancewiththeinstructions,maycauseharmfulinterference toradiocommunications.However,thereisnoguaranteethatinterferencewillnot occurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferenceto radioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoff andon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthe followingmeasures:
-Reorientorrelocatethereceivingantenna.
-Increasetheseparationbetweentheequipmentandreceiver.
-Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthe receiverisconnected.
-Consultthedealeroranexperiencedradio/TVtechnicianforhelp. ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforan uncontrolledenvironment.Thisequipmentshouldbeinstalledandoperatedwith minimumdistance20cmbetweentheradiator&yourbody.
| 1 | Internal Photos | Internal Photos | 562.34 KiB | May 08 2019 |
Internal Photos 5g Antenna 2.4g Antenna
| 1 | Label | ID Label/Location Info | 46.25 KiB | May 08 2019 |
Label Location 40*20mm Model: WD-R1200U FCC ID: ZNPWD-R1200U This device complies with Part 15 of the FCC Rules. Operation ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. is subject to the following two conditions:(1)This device may not cause harmful interfer
| 1 | Agent Authorization Letter | Cover Letter(s) | 23.13 KiB | May 08 2019 |
Shenzhen Century Xinyang Tech Co., Ltd Agent Authorization Letter 2019/7/3 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:
We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Clients signature:
Clients name / title : Wiley Tsai /Manager Contact information / address: 3F, North Building, Bantian High-tech industrial Zone, No. 2 of Bell Road, Longgang, Shenzhen, Guangdong, China
| 1 | Long Term Confidentiality Request Letter | Cover Letter(s) | 22.74 KiB | May 08 2019 |
Shenzhen Century Xinyang Tech Co., Ltd Long Term Confidentiality Request Letter 2019/7/3 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Dual Band WiFi Repeater Trademark: N/A FCC ID: ZNPWD-R1200U MODEL : WD-R1200U, WD-R1201U, WD-R1202U, WD-R1203U To Whom It May Concern:
This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the
- Block Diagram
- Schematics
- Operational Description
- SOFTWARE SECURITY REQUIREMENTS required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Clients signature:
Clients name / title : Wiley Tsai /Manager Contact information / address: 3F, North Building, Bantian High-tech industrial Zone, No. 2 of Bell Road, Longgang, Shenzhen, Guangdong, China
| 1 | Model Difference | Cover Letter(s) | 20.05 KiB | May 08 2019 |
Shenzhen Century Xinyang Tech Co., Ltd Model Difference EUT NAME: Dual Band WiFi Repeater Trademark: N/A FCC ID: ZNPWD-R1200U MODEL : WD-R1200U, WD-R1201U, WD-R1202U, WD-R1203U The product is different for model number and outlook color. Regards Sincerely Clients signature:
Clients name / title : Wiley Tsai /Manager Contact information / address: 3F, North Building, Bantian High-tech industrial Zone, No. 2 of Bell Road, Longgang, Shenzhen, Guangdong, China
| 1 | RF Exposure | RF Exposure Info | 105.77 KiB | May 08 2019 |
Shenzhen BCTC Testing Co., Ltd. FCC ID: ZNPWD-R1200U RF EXPOSURE EVALUATION 1. Introduction According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in 1.1307(b), a device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 cm is normally maintained between the transmitting antenna and the body of the user or nearby persons. In this context, the term fixed location means that the device is physically secured at one location and is not able to be easily moved to another location. Transmitting devices designed to be used by consumers or workers that can be easily re-located, such as wireless devices associated with a personal computer, are considered to be mobile devices if they meet the 20 cm separation requirement. The limits to be used for MPE evaluation are specified in 1.1310. All unlicensed personal communications service (PCS) devices and unlicensed NII devices shall be subject to the limits for general population/uncontrolled exposure. 2.RF Radiation Exposure Limits According to 47 CFR 1.1310, the criteria listed in below table shall be used to evaluate the environmental impact of human exposure to RF radiation as specified in 1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of 2.1093. Notes: 1. f = frequency in MHz 2. Occupational/controlled limits apply in situations in which persons are exposed as a consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. Limits for occupational/controlled exposure also apply in situations when an individual is transient through a location where occupational/controlled limits apply provided they are made aware of the potential for exposure. 3. General population/uncontrolled exposures apply in situations in which the general public may be exposed, or in which persons that are exposed as a consequence of their employment may not be fully aware of the potential for exposure or cannot exercise control over their exposure. Shenzhen BCTC Testing Co., Ltd. 3.MPE Assessment Method Calculations can be made to predict RF field strength and power density levels around typical RF sources. For example, in the case of a single radiating antenna, a prediction for power density in the far-field of the antenna can be made by use of the general Equations below. This equation is generally accurate in the far-field of an antenna but will over-predict power density in the near field, where they could be used for making a "worst case" or conservative prediction. Where S = Power Density, unit in mW/cm2 P = Power input to the antenna, unit in mW G = Power gain of the antenna in the direction of interest relative to an isotropic radiator R = Distance to the center of radiation of the antenna, unit in cm EIRP = Effective isotropically radiated power 4. MPE Calculation for Standalone Operations Operation Frequency: 2412-2462MHz, 5180-5240MHz, 5745-5825MHz Power density limited: 1mW/ cm2 Antenna Type: Internal antenna Antenna gain: 2dBi R=20cm mW=10^(dBm/10)
=3.1415926 2.4g:
Frequency Antenna port Maximum Conducted Output Power(PK)
(MHz) 2412 802.11b 2437 2462 2412 802.11g 2437 2462 Ant.1 Ant.2 Ant.1 Ant.2 Ant.1 Ant.2 Ant.1 Ant.2 Ant.1 Ant.2 Ant.1 Ant.2
(dBm) 13.85 13.55 13.63 13.45 13.57 13.51 13.86 13.48 13.69 13.37 13.35 13.05 Total Conducted Output Power(PK)
(dBm) N/A N/A N/A N/A N/A N/A LIMIT dBm 30 30 30 30 30 30 Shenzhen BCTC Testing Co., Ltd. 12.74 12.48 12.39 12.45 12.69 12.25 11.87 11.46 11.57 11.63 11.76 11.65 Antenna Gain(dBi) 1.58
(2.0dBi) 1.58
(2.0dBi) 1.58
(2.0dBi) 1.58
(2.0dBi) 3.17
(5.01dBi) 3.17
(5.01dBi) 3.17
(5.01dBi) 3.17
(5.01dBi) 15.62 15.43 15.49 14.68 14.61 14.72 Power Density at R=20cm
(mW/cm2) 0.00790 0.00790 0.00790 0.00790 0.01259 0.01259 0.01000 0.01000 30 30 30 30 30 30 Total Power Density at R=20cm
(mW/cm2) Limit
(mW/cm2) Result
/
/
/
/
0.02518 0.02000 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Pass Pass Pass Pass Pass Pass Pass Pass 2412 802.11n20 2437 2462 2422 802.11n40 2437 2452 Ant.1 Ant.2 Ant.1 Ant.2 Ant.1 Ant.2 Ant.1 Ant.2 Ant.1 Ant.2 Ant.1 Ant.2 Test Result of RF Exposure Evaluation Output power Target power W/
tolerance
(dBm) 131.0 Max tune up power tolerance
(dBm) 14.0 to antenna
(mW) 802.11b ANT1 802.11b ANT2 802.11g ANT1 802.11g ANT2 802.11n20 MHz ANT1 802.11n20 MHz ANT2 802.11n40 MHz ANT1 802.11n40 131.0 131.0 131.0 121.0 121.0 111.0 14.0 14.0 14.0 13.0 13.0 12.0 25.12 25.12 25.12 25.12 19.95 19.95 15.85 12.0 15.85 111.0 MHz ANT2 Note1: Directional Gain=2dBi+10log(2)=5.01dBi Note2: The EUT 802.11n (20) and 802.11n(40) is support MIMO mode. Shenzhen BCTC Testing Co., Ltd. Frequency Maximum output
(PK) (dBm)
(MHz) ANT 1 ANT 2 TX 802.11a Mode Total Power
(PK) dBm 5180 5200 5240 5180 5200 5240 5190 5230 5180 5200 5240 5190 5230 5210 TX 802.11 n20M Mode TX 802.11 n40M Mode TX 802.11 AC20M Mode 13.72 13.69 13.35 13.570 13.760 14.080 13.870 13.570 13.840 13.540 13.250 12.140 12.110 13.68 13.47 13.42 13.280 13.170 13.070 13.150 13.070 13.270 13.060 13.110 12.010 12.100
-
-
-
16.438 16.485 16.615 16.535 16.337 16.575 16.317 16.191 15.086 15.115 TX 802.11 AC40M Mode TX 802.11 AC80M Mode 10.530 10.420 13.486 LIMIT dBm 23.98 23.98 23.98 23.98 23.98 23.98 23.98 23.98 23.98 23.98 23.98 23.98 23.98 23.98 Result Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass 5g Test Channel CH36 CH40 CH48 CH36 CH40 CH48 CH38 CH46 CH36 CH40 CH48 CH38 CH46 CH42 5.8g Test Channel LIMIT dBm Result 30 30 30 30 30 30 30 30 30 30 30 30 30 30 Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Frequency Maximum output
(PK) (dBm)
(MHz) ANT 1 ANT 2 TX 802.11a Mode Total Power
(PK) dBm TX 802.11 n20M Mode TX 802.11 n40M Mode TX 802.11 AC20M Mode 14.15 14.29 13.38 13.31 13.37 13.22 12.28 12.16 13.14 13.21 13.22 11.58 11.34 13.36 13.11 13.37 13.13 13.29 13.44 12.14 12.03 13.05 13.09 13.15 11.25 11.28
-
-
-
16.231 16.340 16.342 15.221 15.106 16.106 16.161 16.195 14.428 14.320 TX 802.11 AC40M Mode TX 802.11 AC80M Mode 10.02 10.1 13.070 CH 149 CH 157 CH 165 CH 149 CH 157 CH 165 CH 151 CH 159 CH 149 CH 157 CH 165 CH 151 CH 159 CH 155 5745 5785 5825 5745 5785 5825 5755 5795 5745 5785 5825 5755 5795 5775 Shenzhen BCTC Testing Co., Ltd. Test Result of RF Exposure Evaluation 5g:
Target power W/ tolerance
(dBm) Max tune up power tolerance
(dBm) Output power to antenna
(mW) 802.11a ANT1 802.11a ANT2 802.11n 20MHz ANT1 802.11n 20MHz ANT2 802.11n 40MHz ANT1 802.11n 40MHz ANT2 802.11ac 20MHz ANT1 802.11ac 20MHz ANT2 802.11ac 40MHz ANT1 802.11ac 40MHz ANT2 802.11ac 80MHz ANT1 802.11ac 80MHz ANT2 5.8g 131.0 131.0 141.0 141.0 131.0 131.0 131.0 131.0 121.0 121.0 101.0 101.0 14.0 14.0 15.0 15.0 14.0 14.0 14.0 14.0 13.0 13.0 11.0 11.0 25.12 25.12 31.62 31.62 25.12 25.12 25.12 25.12 19.95 19.95 12.59 12.59 Target power W/ tolerance
(dBm) Max tune up power tolerance
(dBm) Output power to antenna
(mW) 802.11a ANT1 802.11a ANT2 802.11n 20MHz ANT1 802.11n 20MHz ANT2 802.11n 40MHz ANT1 802.11n 40MHz ANT2 802.11ac 20MHz ANT1 802.11ac 20MHz ANT2 802.11ac 40MHz ANT1 802.11ac 40MHz ANT2 802.11ac 80MHz ANT1 141.0 141.0 131.0 131.0 121.0 121.0 131.0 131.0 111.0 111.0 101.0 15.0 15.0 14.0 14.0 13.0 13.0 14.0 14.0 12.0 12.0 11.0 31.62 31.62 25.12 25.12 19.95 19.95 25.12 25.12 15.85 15.85 12.59 Antenna Gain(dBi) 1.58
(2.0dBi) 1.58
(2.0dBi) 3.17
(5.01dBi) 3.17
(5.01dBi) 3.17
(5.01dBi) 3.17
(5.01dBi) 3.17
(5.01dBi) 3.17
(5.01dBi) 3.17
(5.01dBi) 3.17
(5.01dBi) 3.17
(5.01dBi) 3.17
(5.01dBi) Antenna Gain(dBi) 1.58
(2.0dBi) 1.58
(2.0dBi) 3.17
(5.01dBi) 3.17
(5.01dBi) 3.17
(5.01dBi) 3.17
(5.01dBi) 3.17
(5.01dBi) 3.17
(5.01dBi) 3.17
(5.01dBi) 3.17
(5.01dBi) 3.17
(5.01dBi) 3.17 Power Density at R=20cm
(mW/cm2) Total Power Density at R=20cm
(mW/cm2) Limit
(mW/cm2) Result 0.00790 0.00790 0.01994 0.01994 0.01584 0.01584 0.01584 0.01584 0.01259 0.01259 0.00794 0.00794
/
/
0.03988 0.03168 0.03168 0.02518 0.01588 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Power Density at R=20cm
(mW/cm2) Total Power Density at R=20cm
(mW/cm2) Limit
(mW/cm2) Result 0.00994 0.00994 0.01584 0.01584 0.01259 0.01259 0.01584 0.01584 0.01000 0.01000 0.00794 0.00794
/
/
0.03168 0.0518 0.03168 0.02000 0.01588 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass 802.11ac 80MHz 101.0 11.0 12.59 ANT2 Note1: Directional Gain=2dBi+10log(2)=5.01dBi Note2: The EUT 802.11n (20), 802.11n(40) and 802.11ac (20), 802.11ac (40), 802.11ac (80)is support MIMO mode.
(5.01dBi) Simultaneous emission Shenzhen BCTC Testing Co., Ltd. Power density Limits
(mW/cm2 ) 2.4G WIFI Power density Limits
(mW/cm2 ) 5G WIFI Power density Limits
(mW/cm2 ) 5.8G WIFI Calculate Evaluation result
(mW/cm2 ) Power density Limits
(mW/cm2) 0.02518 0.03988 0.03168 0.09674 1 Conclusion:
For the max result : 0.09674 1.0, compliance with FCC's RF Exposure. Summary: Since the ERP (effective radiated power) operated at < 1.5 GHz is less than 1.5 watts and > 1.5 GHz is less than 3 watts, the routine environmental evaluation is not required, and the MPE result calculated for this device complies with the MPE limit as specified in 47 CFR 1.1310.
| 1 | Test Setup Photos | Test Setup Photos | 248.71 KiB | May 08 2019 |
Shenzhen BCTC Testing Co., Ltd. Conducted Emission Shenzhen BCTC Testing Co., Ltd. Radiated Emission Test Shenzhen BCTC Testing Co., Ltd.
| 1 | Test report | Test Report | 4.60 MiB | May 08 2019 |
Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Test Report FCC ID: ZNPWD-R1200U Product Name: Dual Band WiFi Repeater Trademark:
N/A Model Name :
WD-R1200U WD-R1201U, WD-R1202U, WD-R1203U Prepared For : Shenzhen Century Xinyang Tech Co., Ltd Address :
3F, North Building, Bantian High-tech industrial Zone, No. 2 of Bell Road, Longgang, Shenzhen, Guangdong, China Prepared By :
Shenzhen BCTC Testing Co., Ltd. Address :
BCTC Building & 1-2F, East of B Building, Pengzhou Industrial, Fuyuan 1st Road, Qiaotou Community, Fuyong Street, Baoan District, Shenzhen, China Test Date:
Jun. 10, 2019 to Jun. 25, 2019 Date of Report :
Jun. 25, 2019 Report No.:
BCTC-LH190500195-2E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 1 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E VERIFICATION OF COMPLIANCE Applicants name ........... Shenzhen Century Xinyang Tech Co., Ltd Address ............................ 3F, North Building, Bantian High-tech industrial Zone, No. 2 of Bell Road, Longgang, Shenzhen, Guangdong, China Manufacture's Name ...... Shenzhen Century Xinyang Tech Co., Ltd Address ............................ 3F, North Building, Bantian High-tech industrial Zone, No. 2 of Bell Road, Longgang, Shenzhen, Guangdong, China Product description Product name .......................Dual Band WiFi Repeater Model Name:
WD-R1200U FCC Part15.407 ANSI C63.10-2013 KDB789033 D02 General U-NII Test Procedures New Rules v02r01 This device described above has been tested by BCTC, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of BCTC, this document may be altered or revised by BCTC, personal only, and shall be noted in the revision of the document. Standards Prepared by(Engineer):
Cai Fang Zhong Reviewer(Supervisor):
Eric Yang Approved(Manager):
Zero Zhou Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 2 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E TABLE OF CONTENTS 6. 5.1. 5.2. 5.3. Test Report Declaration Page 1. TEST SUMMARY .......................................................................................................................... 5 2. GENERAL PRODUCT INFORMATION .................................................................................... 6 Product Function .............................................................................................................................. 6 2.1. 2.2. Description of Device (EUT) .......................................................................................................... 6 Independent Operation Modes ..................................................................................................... 8 2.3. Test Sites ............................................................................................................................................ 8 2.4. 2.5. List of Test and Measurement Instruments............................................................................... 9 3. TEST SET-UP AND OPERATION MODES ............................................................................ 10 3.1. Principle of Configuration Selection ......................................................................................... 10 3.2. Block Diagram of Test Set-up ..................................................................................................... 10 3.3. Auxiliary Equipment ...................................................................................................................... 10 3.4. Countermeasures to Achieve EMC Compliance .................................................................... 10 4. EMISSION TEST RESULTS ..................................................................................................... 11 4.1. Conducted Emission Measurement .......................................................................................... 11 4.2. Radiated Emission Measurement .............................................................................................. 15 5. BAND EDGE COMPLIANCE TEST ......................................................................................... 24 Limits ................................................................................................................................................. 24 TEST PROCEDURE ........................................................................................................................ 24 Test Data ........................................................................................................................................... 24 26DB AND 99% BANDWIDTH TEST ...................................................................................... 37 6.1. Applied procedures / limit ............................................................................................................ 37 TEST PROCEDURE ........................................................................................................................ 37 6.2. 6.3. Test result......................................................................................................................................... 38 7. MINIMUM 6 DB BANDWIDTH .................................................................................................. 46 7.1. Applied procedures / limit ............................................................................................................ 46 TEST PROCEDURE ........................................................................................................................ 46 7.2. 7.3. Test result......................................................................................................................................... 46 8. OUTPUT POWER TEST ............................................................................................................ 51 Limits ................................................................................................................................................. 51 Test setup ......................................................................................................................................... 51 Test result......................................................................................................................................... 52 9. PEAK POWER SPECTRAL DENSITY TEST ........................................................................ 53 Limits ................................................................................................................................................. 53 Test setup ......................................................................................................................................... 53 Test data ........................................................................................................................................... 54 DUTY CYCLE TEST SIGNAL ............................................................................................... 68 FREQUENCY STABILITY ..................................................................................................... 69 11.1. Limits ................................................................................................................................................. 69 11.2. Test setup ......................................................................................................................................... 69 11.3. Test data ........................................................................................................................................... 70 ANTENNA REQUIREMENT .................................................................................................. 82 12.1. STANDARD REQUIREMENT ........................................................................................................ 82 8.1. 8.2. 8.3. 9.1. 9.2. 9.3. 10. 11. 12. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 3 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 12.2. EUT ANTENNA ................................................................................................................................ 82 PHOTOGRAPHS OF TEST SET-UP ................................................................................... 83 EUT PHOTO ............................................................................................................................. 86 13. 14. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 4 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 1. TEST SUMMARY Test Items Conducted Emissions Radiated Emissions 26dB bandwidth and 99%dB Bandwidth Minimum 6 dB bandwidth Power density Maximum Peak Output Power Emissions from out of band Transmission in case of Absence of Information Frequency Stability Antenna Requirement NOTE:
Test Requirement RSS-GEN 15.207 RSS-GEN 15.407(b), 15.209 RSS-247 15.403(i) 15.407(e) 15.407(e) RSS-247 15.407 (a) RSS-247 15.407 (a) RSS-247 15.407 (b) RSS-247 15.407(c) RSS-247 15.407(g) 15.203 Result PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS
(1) N/A denotes test is not applicable in this Test Report
(2) For all test, the setup authorization of the prototype testing software comes from the customer. (including output power and other parameters) Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 5 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 2. GENERAL PRODUCT INFORMATION 2.1. Product Function Refer to Technical Construction Form and User Manual. 2.2. Description of Device (EUT) Dual Band WiFi Repeater WD-R1200U WD-R1201U, WD-R1202U, WD-R1203U The product is different for model number and outlook color. 5180-5240 5745-5825MHz(5G 802.11a/n/ac(HT20)) 5190-5230, 5755-5795MHz(802.11n/ac(HT40)) 5210, 5775MHz(802.11ac(HT80)) See channel list 64QAM, 16QAM, QPSK, BPSK for OFDM 802.11 a: 6,9,12,18,24,36,48,54Mbps;
802.11n(HT20):MCS0-MCS15;
802.11n(HT40):MCS0-MCS15;
802.11AC: NSS1,MCS0-MCS9,NSS2,MCS0-MCS9;
External antenna 2dBi AC100-240V 50/60Hz Product Name:
Model No.:
Model Difference Operation Frequency:
Channel numbers:
Modulation technology:
Data Rate Antenna Type:
Antenna gain:
Power supply:
Channel List for 802.11a/n/ac(20) Channel 36 40 Frequency
(MHz) 5180 5200 Channel 44 48 Frequency (MHz) 5220 5240 Channel List for 802.11a/n/ac(20) Frequency
(MHz) 5745 5765 5785 Channel 161 165 Frequency (MHz) 5805 5825 Channel 149 153 157 Channel List for 802.11n/ac(40) Channel 38 Frequency
(MHz) 5190 Channel 46 Frequency (MHz) 5230 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 6 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Channel List for 802.11n/ac(40) Frequency
(MHz) 5755 Channel 159 Frequency (MHz) 5795 Channel 151 Channel List for 802.11ac(80) Channel 42 Frequency (MHz) 5210 Channel List for 802.11ac(80) Channel Frequency (MHz) 5775 155 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 7 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 2.3. Independent Operation Modes The basic operation modes are:
These is Digital Transmission system (DTS) and have modulation OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM. According exploratory test, EUT will have maximum output power in those data rate
(802.11a/n: MCS0), so those data rate were used for all test. The equipment enables high-speed access without wires to network assets. This adapter uses the IEEE 802.11 protocol to enable wireless communications between the host and Wireless rooter. 802.11a/n/ac(20) Frequency Low Middle High 802.11n/ac(40) Frequency Low Middle High 802.11ac(80) Frequency Band 1 5180MHz 5200MHz 5240MHz Band 1 5190MHz
-
Band 4 5745MHz 5785MHz 5825MHz Band 4 5755MHz
-
5230MHz 5795MHz Band 1 5210MHz Band 4 5775MHz Note1: Directional Gain=2dBi+10log(2)=5.01dBi Note2: The EUT 802.11n/ac is support MIMO mode. 2.4. Test Sites 2.4.1. Test Facilities Lab Qualifications :
FCC Test Firm Registration Number: 712850 Test site MRA number: CN1212 IC Registered No.: 23583 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 8 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 2.5. List of Test and Measurement Instruments Radiation Test equipment Item Equipment Manufacturer Type No. Serial No. Last calibration Calibrated until 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Spectrum Analyzer
(9kHz-26.5GHz) Test Receiver
(9kHz-7GHz) Bilog Antenna
(30MHz-3GHz) Horn Antenna
(1GHz-18GHz) Horn Antenna
(18GHz-40GHz) Amplifier
(9KHz-6GHz) Amplifier
(0.5GHz-18GHz) Amplifier
(18GHz-40GHz) Loop Antenna
(9KHz-30MHz) RF cables1
(9kHz-30MHz) RF cables2
(30MHz-1GHz) RF cables3
(1GHz-40GHz) Power Metter Power Sensor (AV) Signal Analyzer 20kHz-26.5GHz Test Receiver 9kHz-40GHz Agilent E4407B MY45109572 Jul. 09, 2018 Jul. 08, 2019 R&S ESRP 101154 Jul. 09, 2018 Jul. 08, 2019 SCHWARZBECK VULB9163 VULB9163-942 Jul. 09, 2018 Jul. 08, 2019 SCHWARZBECK BBHA9120D SCHWARZBECK BBHA9170 1541 822 Jul. 09, 2018 Jul. 08, 2019 Aug. 14, 2018 Aug. 13, 2019 SCHWARZBECK BBV9744 9744-0037 Jul. 09, 2018 Jul. 08, 2019 SCHWARZBECK BBV9718 9718-309 Jul. 09, 2018 Jul. 08, 2019 MITEQ TTA1840-35-HG 2034381 Aug. 12, 2018 Aug. 11, 2019 SCHWARZBECK FMZB1519B 014 Aug. 12, 2018 Aug. 11, 2019 Huber+Suhnar 9kHz-30MHz B1702988-0008 Aug. 12, 2018 Aug. 11, 2019 Huber+Suhnar 30MHz-1GHz 1486150 Aug. 12, 2018 Aug. 11, 2019 Huber+Suhnar 1GHz-40GHz 1607106 Aug. 06, 2018 Aug. 05, 2019 Keysight Keysight E4419 E9300A
\
\
Aug. 06, 2018 Aug. 05, 2019 Aug. 06, 2018 Aug. 05, 2019 KEYSIGHT N9020A MY49100060 Aug. 06, 2018 Aug. 05, 2019 R&S FSP40 100550 Aug. 06, 2018 Aug. 05, 2019 D.C. Power Supply LongWei TPR-6405D
\
Software Frad EZ-EMC FA-03A2 RE
\
\
\
\
Conduction Test equipment Item Equipment Manufacturer Type No. Serial No. Last calibration Calibrated until 1 2 3 4 5 Test Receiver R&S ESR3 LISN LISN SCHWARZBECK NSLK8127 R&S ENV216 102075 8127739 101375 Jul. 09, 2018 Jul. 08, 2019 Jul. 09, 2018 Jul. 08, 2019 Jul. 09, 2018 Jul. 08, 2019 RF cables Huber+Suhnar 9kHz-30MHz B1702988-0008 Jul. 09, 2018 Jul. 08, 2019 Frad EZ-EMC EMC-CON 3A1
\
\
Software Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 9 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 3. TEST SET-UP AND OPERATION MODES 3.1. Principle of Configuration Selection Emission: The equipment under test (EUT) was configured to measure its highest possible radiation level. The test modes were adapted accordingly in reference to the Operating Instructions. 3.2. Block Diagram of Test Set-up System Diagram of Connections between EUT and Simulators
(EUT: Dual Band WiFi Repeater ) 3.3. Auxiliary Equipment Note EUT N/A N/A Equipment Item E-1 Dual Band WiFi Repeater Personal computer Adapter E-3 E-2 Item Shielded Type C-1 C-2 NO NO Mfr/Brand Model/Type No. Series No. N/A Lenovo Lenovo Ferrite Core NO NO WD-R1200U S2 SA10E75793 Length 0.5M 1.5M N/A N/A N/A Note USB cable unshielded DC cable unshielded 3.4. Countermeasures to Achieve EMC Compliance None. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 10 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 4. EMISSION TEST RESULTS 4.1. Conducted Emission Measurement POWER LINE CONDUCTED EMISSION Limits
(Frequency Range 150KHz-30MHz) FREQUENCY (MHz) 0.15 -0.5 0.50 -5.0 5.0 -30.0 Limit (dBuV) Quasi -peak 66 - 56 *
56.00 60.00 Average 56 - 46 *
46.00 50.00 Standard FCC FCC FCC Note:
(1) The tighter limit applies at the band edges.
(2) The limit of " * " marked band means the limitation decreases linearly with the logarithm of the frequency in the range. The following table is the setting of the receiver Receiver Parameters Attenuation Start Frequency Stop Frequency IF Bandwidth Setting 10 dB 0.15 MHz 30 MHz 9 kHz Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 11 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 4.1.1. TEST PROCEDURE a. The EUT was placed 0.8 meters from the horizontal ground plane with EUT being connected to the power mains through a line impedance stabilization network (LISN). All other support equipments powered from additional LISN(s). The LISN provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument. b. Interconnecting cables that hang closer than 40 cm to the ground plane shall be folded back and forth in the center forming a bundle 30 to 40 cm long. c. I/O cables that are not connected to a peripheral shall be bundled in the center. The end of the cable may be terminated, if required, using the correct terminating impedance. The overall length shall not exceed 1 m. d. LISN at least 80 cm from nearest part of EUT chassis. e. For the actual test configuration, please refer to the related Item EUT Test Photos. 4.1.2. DEVIATION FROM TEST STANDARD No deviation 4.1.3. TEST SETUP V e r t i c a l R e f e r e n c e G r o u n d P l a n e T e s t R e c e i v e r 4 0 c m E U T L I S N 8 0 c m N o t e : 1 . S u p p o r t u n i t s w e r e c o n n e c t e d t o s e c o n d L I S N . 2 . B o t h o f L I S N s ( A M N ) a r e 8 0 c m f r o m E U T a n d a t l e a s t 8 0 f r o m o t h e r u n i t s a n d o t h e r m e t a l p l a n e s H o r i z o n t a l R e f e r e n c e G r o u n d P l a n e 4.1.4. EUT OPERATING CONDITIONS The EUT was configured for testing in a typical fashion (as a customer would normally use it). The EUT has been programmed to continuously transmit during test. This operating condition was tested and used to collect the included data. We pretest all adapters emission, only the adapter 1s data was worst and the data was recording in the report. The data only show the worst mode. If peak level comply with Quasi-Peak limit, then the Quasi-Peak level is deemed to comply with Quasi-Peak limit. We pretest AC 120V and AC 240V, the worst voltage was AC 120V and the data recording in the report. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 12 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 4.1.5. TEST RESULTS EUT:
Temperature:
Pressure:
Test Voltage :
Dual Band WiFi Repeater Model Name :
26 1010hPa AC 120V/60Hz Relative Humidity: 54%
Phase :
Test Mode:
L Link Mode WD-R1200U Remark:
1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 13 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Dual Band WiFi Repeater Model Name :
26 1010hPa AC 120V/60Hz Relative Humidity: 54%
Phase :
Test Mode:
N Link Mode WD-R1200U EUT:
Temperature:
Pressure:
Test Voltage :
Remark:
1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 14 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 4.2. Radiated Emission Measurement 4.2.1 Applicable Standard According to FCC Part 15.407(d) and 15.209 4.2.2 Conformance Limit According to FCC Part 15.407(b)(7): radiated emissions which fall in the restricted bands, as defined in 15.205(a), must also comply with the radiated emission limits specified in 15.209(a)
(see 15.205(c)). According to FCC Part15.205, Restricted bands MHz 0.090-0.110 10.495-0.505 2.1735-2.1905 4.125-4.128 4.17725-4.17775 4.20725-4.20775 6.215-6.218 6.26775-6.26825 8.291-8.294 8.362-8.366 8.37625-8.38675 8.41425-8.41475 12.29-12.293 12.51975-12.52025 12.57675-12.57725 13.36-13.41 MHz 16.42-16.423 16.69475-16.69525 16.80425-16.80475 25.5-25.67 37.5-38.25 73-74.6 74.8-75.2 123-138 149.9-150.05 156.52475-156.52525 156.7-156.9 162.0125-167.17 167.72-173.2 240-285 322-335.4 MHz 399.9-410 608-614 960-1240 1300-1427 1435-1626.5 1645.5-1646.5 1660-1710 2200-2300 2310-2390 2483.5-2500 2690-2900 3260-3267 3332-3339 3345.8-3358 3600-4400 GHz 4.5-5.15 5.35-5.46 7.25-7.75 8.025-8.5 9.0-9.2 9.3-9.5 10.6-12.7 14.47-14.5 15.35-16.2 17.7-21.4 22.01-23.12 23.6-24.0 31.2-31.8 36.43-36.5
(2) 20dBc in any 100 kHz bandwidth outside the operating frequency band. In case the emission fall within the restricted band specified on 15.205(a), then the 15.209(a) limit in the table below has to be followed. Restricted Frequency(MHz) 0.009~0.490 0.490~1.705 1.705~30.0 30-88 88-216 216-960 Above 960 Field Strength
(dBV/m) 20 log (uV/m) 20 log (uV/m) 29.5 40 43.5 46 54 Field Strength
(V/m) 2400/F(KHz) 2400/F(KHz) 30 100 150 200 500 Measurement Distance 300 30 30 3 3 3 3 Limits of Radiated Emission Measurement(Above 1000MHz) Frequency(MHz) Above 1000 Class B (dBuV/m) (at 3M) PEAK 74 AVERAGE 54 Remark :1. Emission level in dBuV/m=20 log (uV/m) 2. Measurement was performed at an antenna to the closed point of EUT distance of meters. 3. Distance extrapolation factor =40log(Specific distance/ test distance)( dB);
Limit line=Specific limits(dBuV) + distance extrapolation factor. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 15 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 4.2.3 Measuring Instruments The Measuring equipment is listed in the section 6.3 of this test report. For radiated emissions below 30MHz C For radiated emissions from 30MHz to 1000MHz 4.2.4 Test Configuration
(a)
(b) Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 16 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(c) For radiated emissions above 1000MHz 4.2.5 Test Procedure The test site semi-anechoic chamber has met the requirement of NSA tolerance 4 dB according to the standards: ANSI C63.10-2013. The test distance is 3m.The setup is according to the requirements in Section 13.1.4.1 of ANSI C63.10-2013 and CAN/CSA-CEI/IEC CISPR 22. This test is required for any spurious emission that falls in a Restricted Band, as defined in Section 15.205. It must be performed with the highest gain of each type of antenna proposed for use with the EUT. Use the following spectrum analyzer settings:
Spectrum Parameter Attenuation Start Frequency Stop Frequency RB / VB (emission in restricted band) Setting Auto 1000 MHz 10th carrier harmonic 1 MHz / 1 MHz for Peak, 1 MHz / 10Hz for Average Receiver Parameter Attenuation Start ~ Stop Frequency Start ~ Stop Frequency Start ~ Stop Frequency Setting Auto 9kHz~150kHz / RB 200Hz for QP 150kHz~30MHz / RB 9kHz for QP 30MHz~1000MHz / RB 120kHz for QP a
. b
. The measuring distance of at 3 m shall be used for measurements at frequency up to 1GHz. For frequencies above 1GHz, any suitable measuring distance may be used. The EUT was placed on the top of a rotating table 0.8 m for below 1GHz and 1.5m for above 1GHz the ground at a 3 meter. The table was rotated 360 degrees to determine the position of the highest radiation. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 17 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E c
. d
. e
. The height of the equipment or of the substitution antenna shall be 0.8 m for below 1GHz and 1.5m for above 1GHz; the height of the test antenna shall vary between 1 m to 4 m. Both horizontal and vertical polarizations of the antenna are set to make the measurement. The initial step in collecting conducted emission data is a spectrum analyzer peak detector mode pre-scanning the measurement frequency range. Significant peaks are then marked and then Quasi Peak detector mode re-measured. If the Peak Mode measured value compliance with and lower than Quasi Peak Mode Limit, the EUT shall be deemed to meet QP Limits and then no additional QP Mode measurement performed. For the actual test configuration, please refer to the related Item EUT Test Photos. f
. Note:
Both horizontal and vertical antenna polarities were tested and performed pretest to three orthogonal axis. The worst case emissions were reported During the radiated emission test, the Spectrum Analyzer was set with the following configurations:
Frequency Band
(MHz) 30 to 1000 Above 1000 Function QP Peak Average Resolution bandwidth 120 kHz 1 MHz 1 MHz Video Bandwidth 300 kHz 1 MHz 10 Hz Note: for the frequency ranges below 30 MHz, a narrower RBW is used for these ranges but the measured value should add a RBW correction factor (RBWCF) where RBWCF [dB] =10*lg(100
[kHz]/narrower RBW [kHz]). , the narrower RBW is 1 kHz and RBWCF is 20 dB for the frequency 9 kHz to 150 kHz, and the narrower RBW is 10 kHz and RBWCF is 10 dB for the frequency 150 kHz to 30 MHz. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 18 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Radiated Spurious Emission (Below 30MHz ) Dual Band WiFi Repeater Model Name 20 1010 hPa Relative Humidity Polarization :
EUT Temperature Pressure Test Voltage AC 120V/60Hz Test Mode TX WD-R1200U 48%
---
Freq.
(MHz)
--
--
Reading
(dBuV/m)
--
--
Limit
(dBuV/m)
--
--
Margin
(dB)
--
--
State P/F PASS PASS Note:
The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. Distance extrapolation factor =40 log (specific distance/test distance)(dB);
Limit line = specific limits(dBuv) + distance extrapolation factor. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 19 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Radiated Spurious Emission (Between 30MHz 1GHz) 26 1010 hPa Temperature Pressure Test Voltage AC 120V/60Hz Test Mode
(Worst) Link Mode Relative Humidity Polarization :
Remark:
Factor = Antenna Factor + Cable Loss Pre-amplifier. 54%
Horizontal Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 20 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 26 1010 hPa Temperature Pressure Test Voltage AC 120V/60Hz Test Mode
(Worst) Link Mode Relative Humidity Polarization :
54%
Vertical Remark:
Factor = Antenna Factor + Cable Loss Pre-amplifier. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 21 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Radiated Spurious Emission ( Above 1GHz) For the frequency band 5150-5250MHz Harmonics and Spurious Emissions Polar
(H/V) Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Frequency
(MHz) 10360 10360 15540 15540 1036 1036 15540 15540 10400 10400 15600 15600 10400 10400 15600 15600 Meter Reading Cable loss Antenna Factor dB/m
(dBuV)
(dB) Preamp Factor
(dB) Emission Level
(dBuV/m) Limits
(dBuV/m) Margin
(dB) Detector Type Low channel 5180 MHz 57.39 40.02 50.76 34.92 57.03 38.75 50.14 37.23 56.33 40.52 49.91 34.32 56.36 40.02 51.16 38.20 8.47 8.47 10.12 10.12 8.47 8.47 10.12 10.12 37.88 37.88 38.80 38.80 38.64 38.64 38.38 38.38 44.51 44.51 44.10 42.70 44.50 44.50 44.10 44.10 Middle channel 5200 MHz 8.47 8.47 10.12 10.12 8.47 8.47 10.12 10.12 37.88 37.88 38.80 38.80 38.64 38.64 38.38 38.38 44.51 44.51 44.10 42.70 44.50 44.50 44.10 44.10 High channel 5240 MHz 59.23 41.86 55.58 41.14 59.64 41.36 54.54 41.63 58.17 42.36 54.73 40.54 58.97 42.63 55.56 42.60 74.00 54.00 74.00 54.00 74.00 54.00 74.00 54.00 74.00 54.00 74.00 54.00 74.00 54.00 74.00 54.00
-14.77
-12.14
-18.42
-12.86
-14.36
-12.64
-19.46
-12.37
-15.83
-11.64
-19.27
-13.46
-15.03
-11.37
-18.44
-11.40 Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV 8.47 8.47 10.12 10.12 8.47 8.47 10.12 10.12 58.56 42.48 54.26 40.43 59.85 41.20 54.24 42.67 74.00 54.00 74.00 54.00 74.00 54.00 74.00 54.00 44.51 44.51 44.10 42.70 44.50 44.50 44.10 44.10 37.88 37.88 38.80 38.80 38.64 38.64 38.38 38.38 56.72 40.64 49.44 34.21 57.24 38.59 49.84 38.27 10480 10480 15720 15720 10480 10480 15720 15720
-15.44
-11.52
-19.74
-13.57
-14.15
-12.80
-19.76
-11.33 Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Note:
1. This EUT was tested in 802.11a/n/ac(HT20), n/ac(HT40), ac(HT80) mode and 802.11a the worst case position data was reported. 2. Tested the frequency to 40GHz, the amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. 3.PK value is lower than the Average value limit, So average didn't record. Emission level (dBuV/m) = 20 log Emission level (uV/m). Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor = Level. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 22 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E For the frequency band 5725-5850MHz Harmonics and Spurious Emissions Polar
(H/V) Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Frequency
(MHz) 11490 11490 17235 17235 11490 11490 17235 17235 11570 11570 17355 17355 11570 11570 17355 17355 Meter Reading Cable loss Antenna Factor
(dBuV) dB/m
(dB) Preamp Factor
(dB) Emission Level
(dBuV/m) Low channel 5745 MHz 58.94 38.43 50.76 34.49 58.97 39.49 50.05 37.45 57.83 38.83 50.47 34.36 58.90 39.36 51.02 36.48 9.63 9.63 11.34 11.34 9.63 9.63 11.34 11.34 9.63 9.63 11.34 11.34 9.63 9.63 11.34 11.34 37.88 37.88 38.80 38.80 38.64 38.64 38.38 38.38 37.88 37.88 38.8 38.8 38.64 38.64 38.38 38.38 44.51 44.51 44.10 42.70 44.50 44.50 44.10 44.10 44.51 44.51 44.10 42.70 44.50 44.50 44.10 44.10 61.94 41.43 56.80 41.93 62.74 43.26 55.67 43.07 60.83 41.83 56.51 41.80 62.67 43.13 56.64 42.10 Middle channel 5785 MHz High channel 5825 MHz Limits
(dBuV/m) Margin
(dB) Detector Type 74.00 54.00 74.00 54.00 74.00 54.00 74.00 54.00 74.00 54.00 74.00 54.00 74.00 54.00 74.00 54.00
-12.06
-12.57
-17.20
-12.07
-11.26
-10.74
-18.33
-10.93
-13.17
-12.17
-17.49
-12.20
-11.33
-10.87
-17.36
-11.90 Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV 9.63 9.63 11.34 11.34 9.63 9.63 11.34 11.34 44.51 44.51 44.10 42.70 44.50 44.50 44.10 44.10 57.43 39.01 51.66 34.78 59.01 39.54 50.81 36.25 37.88 37.88 38.8 38.8 38.64 38.64 38.38 38.38 74.00 54.00 74.00 54.00 74.00 54.00 74.00 54.00 60.43 42.01 57.70 42.22 62.78 43.31 56.43 41.87 11650 11650 17475 17475 11650 11650 17475 17475
-13.57
-11.99
-16.30
-11.78
-11.22
-10.69
-17.57
-12.13 Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Note:
1. This EUT was tested in 802.11a/n/ac(HT20), n/ac(HT40), ac(HT80) mode and 802.11a the worst case position data was reported. 2. Tested the frequency to 40GHz, the amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. 3.PK value is lower than the Average value limit, So average didn't record. Emission level (dBuV/m) = 20 log Emission level (uV/m). Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor = Level. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 23 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 5. BAND EDGE COMPLIANCE TEST 5.1. Limits
(1) For transmitters operating in the 5.15-5.25 GHz band: All emissions outside of the 5.15-5.35 GHz band shall not exceed an e.i.r.p. of 27 dBm/MHz.
(2) For transmitters operating in the 5.725-5.85 GHz band: All emissions within the frequency range from the band edge to 10 MHz above or below the band edge shall not exceed an e.i.r.p. of 17 dBm/MHz; for frequencies 10 MHz or greater above or below the band edge, emissions shall not exceed an e.i.r.p. of 27 dBm/MHz. 5.2. TEST PROCEDURE 1. Check the calibration of the measuring instrument using either an internal calibrator or a known signal from an external generator. 2. Position the EUT without connection to measurement instrument. Turn on the EUT and connect its antenna terminal to measurement instrument via a low loss cable. Then set it to any one measured frequency within its operating range, and make sure the instrument is operated in its linear range. 3. Set RBW of spectrum analyzer to 1 MHz with a convenient frequency span. 4. Measure the highest amplitude appearing on spectral display and set it as a reference level. Plot the graph with marking the highest point and edge frequency. 5. Repeat above procedures until all measured frequencies were complete. 5.3. Test Data Please see data as below:
Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 24 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Out of Band edge Test CH. Lowest Highest Test Segment MHz Below 5150 Above 5350 Result dBm/MHz
-32.993
-42.220 Limit dBm/MHz
-27
-27 Note:the data just list the worst cases Test CH. Lowest Highest Test Segment MHz Below 5715 5715 to 5725 5850 to 5860 Above 5860 Result dBm/MHz
-29.753
-20.800
-25.228
-28.945 Limit dBm/MHz
-27
-17
-17
-27 Note:the data just list the worst cases NOTE: Represent the value of antenna 1 and 2, The worst data is Antenna 1, only shown Antenna 1 Plot. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 25 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11a) Band Edge, Left Side
(802.11n20) Band Edge, Left Side Antenna 1 5.15~5.25 GHz
(802.11a) Band Edge, Right Side
(802.11n20) Band Edge, Right Side Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 26 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Antenna 1 5.15~5.25 GHz
(802.11n40) Band Edge, Left Side
(802.11ac20) Band Edge, Left Side
(802.11n40) Band Edge, Right Side
(802.11ac20) Band Edge, Right Side Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 27 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11ac40) Band Edge, Left Side
(802.11ac80) Band Edge, Left Side Antenna 1 5.15~5.25 GHz
(802.11ac40) Band Edge, Right Side
(802.11ac80) Band Edge, Right Side Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 28 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11a) Band Edge, Left Side
(802.11n20) Band Edge, Left Side Antenna 1 5.725-5.85 GHz
(802.11a) Band Edge, Right Side
(802.11n20) Band Edge, Right Side Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 29 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11n40) Band Edge, Left Side
(802.11ac20) Band Edge, Left Side Antenna 1 5.725-5.85 GHz
(802.11n40) Band Edge, Right Side
(802.11ac20) Band Edge, Right Side Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 30 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11ac40) Band Edge, Left Side
(802.11ac80) Band Edge, Left Side Antenna 1 5.725-5.85 GHz
(802.11ac40) Band Edge, Right Side
(802.11ac80) Band Edge, Right Side Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 31 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Radiated bandedge 802.11 a For the frequency band 5150-5250MHz Frequency
(MHz) 5105.63 Meter Reading
(dBV) 29.82 Factor Emission Level Limits Margin
(dB)
-5.03
(dBV/m)
(dBV/m) 24.79 74.00
(dB)
-49.21 Detector Type Polarization PK Horizontal Remark:
Factor = Antenna Factor + Correct Factor. Correct Factor= Cable Loss Pre-amplifier Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 32 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Frequency
(MHz) 4725.550 Meter Reading
(dBV) 30.11 Factor Emission Level Limits
(dB)
-5.06
(dBV/m)
(dBV/m) 25.05 74.00 Margin
(dB)
-48.95 Detector Type Polarization PK Vertical Remark:
Factor = Antenna Factor + Correct Factor. Correct Factor= Cable Loss Pre-amplifier Note:
1. This EUT was tested in 802.11a/n/ac(HT20), n/ac(HT40), ac(HT80) mode and 802.11a the worst case position data was reported. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 33 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 802.11n(HT20) For the frequency band 5725-5850MHz Low Channel Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 34 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Middle Channel Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 35 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E High Channel Note:
1. This EUT was tested in 802.11a/n/ac(HT20), n/ac(HT40), ac(HT80) mode and 802.11n(HT20) the worst case position data was reported. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 36 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 6. 26DB AND 99% BANDWIDTH TEST 6.1. Applied procedures / limit The maximum power spectral density is measured as a conducted emission by direct connection of a calibrated test instrument to the equipment under test. If the device cannot be connected directly, alternative techniques acceptable to the Commission may be used. Measurements in the 5.725-5.85 GHz band are made over a reference bandwidth of 500 kHz or the 26 dB emission bandwidth of the device, whichever is less. Measurements in the 5.15-5.25 GHz, 5.25-5.35 GHz, and the 5.47-5.725 GHz bands are made over a bandwidth of 1 MHz or the 26 dB emission bandwidth of the device, whichever is less. A narrower resolution bandwidth can be used, provided that the measured power is integrated over the full reference bandwidth. 6.2. TEST PROCEDURE a) Set RBW = approximately 1% of the emission bandwidth. b) Set the VBW > RBW. c) Detector = Peak. d) Trace mode = max hold. e) Measure the maximum width of the emission that is 26 dB down from the maximum of the emission. Compare this with the RBW setting of the analyzer. Readjust RBW and repeat measurement as needed until the RBW/EBW ratio is approximately 1%. The following procedure shall be used for measuring (99 %) power bandwidth:
1. Set center frequency to the nominal EUT channel center frequency. 2. Set span = 1.5 times to 5.0 times the OBW. 3. Set RBW = 1 % to 5 % of the OBW 4. Set VBW 3 RBW 5. Video averaging is not permitted. Where practical, a sample detection and single sweep mode shall be used. Otherwise, peak detection and max hold mode (until the trace stabilizes) shall be used. 6. Use the 99 % power bandwidth function of the instrument (if available). 7. If the instrument does not have a 99 % power bandwidth function, the trace data points are recovered and directly summed in power units. The recovered amplitude data points, beginning at the lowest frequency, are placed in a running sum until 0.5 % of the total is reached; that frequency is recorded as the lower frequency. The process is repeated until 99.5 % of the total is reached; that frequency is recorded as the upper frequency. The 99% occupied bandwidth is the difference between these two frequencies. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 37 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 6.3. Test result 26dB bandwith Mode Channel Frequency (MHz) 802.11a 802.11 n20 802.11 n40 802.11 AC20 802.11 AC40 802.11 AC80 CH36 CH40 CH48 CH36 CH40 CH48 CH 38 CH 46 CH36 CH40 CH48 CH 38 CH 46 CH 42 5180 5200 5240 5180 5200 5240 5190 5230 5180 5200 5240 5190 5230 5210 99% bandwidth(MHz) 26dB bandwidth
(MHz) ANT 1 ANT 2 ANT 1 ANT 2 16.789 16.774 16.754 17.840 17.829 17.824 36.220 36.208 17.831 17.831 17.834 36.221 36.205 75.182 16.648 16.569 16.699 17.674 17.784 17.816 36.216 36.207 17.831 17.826 17.832 36.212 36.201 75.164 21.11 21.00 20.95 21.79 21.82 21.73 42.58 42.32 21.56 21.88 21.65 42.46 42.37 80.73 21.06 21.00 20.86 21.74 21.81 21.75 42.56 42.33 21.52 21.78 21.63 42.41 42.33 80.71 Result Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass NOTE: Represent the value of antenna 1 and 2, The worst data is Antenna 1, only shown Antenna 1 Plot. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 38 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11a) -26dB&99% Bandwidth plot on channel 36
(802.11a) -26dB&99% Bandwidth plot on channel 40
(802.11a) -26dB&99% Bandwidth plot on channel 48 Antenna 1
(802.11n20) -26dB&99% Bandwidth plot on channel 36
(802.11n20) -26dB&99% Bandwidth plot on channel 40
(802.11n20) -26dB&99% Bandwidth plot on channel 48 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 39 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11n40) -26dB&99% Bandwidth plot on channel 38
(802.11n40) -26dB&99% Bandwidth plot on channel 46 Antenna 1
(802.11ac20) -26dB&99% Bandwidth plot on channel 36
(802.11ac20) -26dB&99% Bandwidth plot on channel 40
(802.11ac20) -26dB&99% Bandwidth plot on channel 48 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 40 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11ac40) -26dB&99% Bandwidth plot on channel 38
(802.11ac40) -26dB&99% Bandwidth plot on channel 46 Antenna 1
(802.11ac80) -26dB&99% Bandwidth plot on channel 42 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 41 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Mode Channel Frequency (MHz) 802.11a 802.11 n20 802.11 n40 802.11 AC20 802.11 AC40 802.11 AC80 CH149 CH157 CH165 CH149 CH157 CH165 CH 151 CH 159 CH149 CH157 CH165 CH 151 CH 159 CH 155 5745 5785 5825 5745 5785 5825 5755 5795 5745 5785 5825 5755 5795 5775 99% bandwidth(MHz) 26dB bandwidth
(MHz) ANT 1 ANT 2 ANT 1 ANT 2 16.775 16.776 16.758 17.808 17.810 17.820 36.207 36.199 17.821 17.820 17.820 36.207 36.226 75.203 16.755 16.762 16.746 17.798 17.803 17.816 36.198 36.186 17.816 17.819 17.815 36.200 36.219 75.178 21.22 21.10 21.03 21.69 21.60 21.81 42.21 42.42 21.74 21.56 21.81 42.21 42.49 81.05 21.19 21.04 21.00 21.59 21.75 21.72 42.16 42.35 21.65 21.27 21.59 42.11 42.37 81.00 Result Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass NOTE: Represent the value of antenna 1 and 2, The worst data is Antenna 1, only shown Antenna 1 Plot. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 42 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11a) -26dB&99% Bandwidth plot on channel 149
(802.11a) -26dB&99% Bandwidth plot on channel 157
(802.11a) -26dB&99% Bandwidth plot on channel 165 Antenna 1
(802.11n20) -26dB&99% Bandwidth plot on channel 149
(802.11n20) -26dB&99% Bandwidth plot on channel 157
(802.11n20) -26dB&99% Bandwidth plot on channel 165 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 43 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11n40) -26dB&99% Bandwidth plot on channel 151
(802.11n40) -26dB&99% Bandwidth plot on channel 159 Antenna 1
(802.11ac20) -26dB&99% Bandwidth plot on channel 149
(802.11ac20) -26dB&99% Bandwidth plot on channel 157
(802.11ac20) -26dB&99% Bandwidth plot on channel 165 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 44 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11ac40) -26dB&99% Bandwidth plot on channel 151
(802.11ac40) -26dB&99% Bandwidth plot on channel 159 Antenna 1
(802.11ac80) -26dB&99% Bandwidth plot on channel 155 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 45 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 7. MINIMUM 6 DB BANDWIDTH 7.1. Applied procedures / limit According to FCC 15.407(e)
(e) Within the 5.725-5.85 GHz band, the minimum 6 dB bandwidth of U-NII devices shall be at least 500 kHz. 7.2. TEST PROCEDURE Section 15.407(e) specifies the minimum 6 dB emission bandwidth of at least 500 KHz for the band 5.715-5.85 GHz. The following procedure shall be used for measuring this bandwidth:
a) Set RBW = 100 kHz. b) Set the video bandwidth (VBW) 3 RBW. c) Detector = Peak. d) Trace mode = max hold. e) Sweep = auto couple. f) Allow the trace to stabilize. g) Measure the maximum width of the emission that is constrained by the frequencies associated with the two outermost amplitude points (upper and lower frequencies) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission. 7.3. Test result Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 46 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 6dB bandwith Mode Channel Frequency
(MHz)
-6dB bandwidth
(MHz) ANT A ANT B Limit
(KHz) Result 802.11a 802.11 n20 802.11 n40 802.11 AC20 802.11 AC40 802.11 AC80 149 157 165 149 157 165 151 159 149 157 165 149 157 155 5745 5785 5825 5745 5785 5825 5755 5795 5745 5785 5825 5745 5785 5775 16.57 16.57 16.57 17.78 17.76 17.80 36.47 36.48 17.71 17.72 17.73 36.53 36.53 75.43 16.53 16.55 16.51 17.73 17.74 17.77 36.54 36.42 17.61 17.59 17.64 36.42 36.53 75.42 500 500 500 500 500 500 500 500 500 500 500 500 500 500 Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass NOTE: Represent the value of antenna 1 and 2, The worst data is Antenna 1, only shown Antenna 1 Plot. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 47 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11a) -6dB Bandwidth plot on channel 149
(802.11a) -6dB Bandwidth plot on channel 157
(802.11a) -6dB Bandwidth plot on channel 165 Antenna 1
(802.11n20) -6dB Bandwidth plot on channel 149
(802.11n20) -6dB Bandwidth plot on channel 157
(802.11n20) -6dB Bandwidth plot on channel 165 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 48 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11n40) -6dB Bandwidth plot on channel 151
(802.11n40) -6dB Bandwidth plot on channel 159 Antenna 1
(802.11ac20) -6dB Bandwidth plot on channel 149
(802.11ac20) -6dB Bandwidth plot on channel 157
(802.11ac20) -6dB Bandwidth plot on channel 165 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 49 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11ac40) -6dB Bandwidth plot on channel 151
(802.11ac40) -6dB Bandwidth plot on channel 159 Antenna 1
(802.11ac80) -6dB Bandwidth plot on channel 155 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 50 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 8. OUTPUT POWER TEST 8.1. Limits For mobile and portable client devices in the 5.15-5.25 GHz band, the maximum conducted output power over the frequency band of operation shall not exceed 250 mW provided the maximum antenna gain does not exceed 6 dBi. For the band 5.725-5.85 GHz, the maximum conducted output power over the frequency band of operation shall not exceed 1 W. 8.2. Test setup 1. The maximum average conducted output power can be measured using Method PM-G (Measurement using a gated RF average power meter):
2. Measurements may be performed using a wideband gated RF power meter provided that the gate parameters are adjusted such that the power is measured only when the EUT is transmitting at its maximum power control level. Since the measurement is made only during the ON time of the transmitter, no duty cycle correction factor is required. a. The Transmitter output (antenna port) was connected to the power meter. b. Turn on the EUT and power meter and then record the power value. c. Repeat above procedures on all channels needed to be tested. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 51 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 8.3. Test result Frequency Maximum output
(PK) (dBm)
(MHz) ANT 1 ANT 2 TX 802.11a Mode Total Power
(PK) dBm LIMIT dBm 23.98 23.98 23.98 23.98 23.98 23.98 23.98 23.98 23.98 23.98 23.98 23.98 23.98 23.98 Result Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass LIMIT dBm Result 30 30 30 30 30 30 30 30 30 30 30 30 30 30 Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Frequency Maximum output
(PK) (dBm)
(MHz) ANT 1 ANT 2 TX 802.11a Mode Total Power
(PK) dBm Test Channel CH36 CH40 CH48 CH36 CH40 CH48 CH38 CH46 CH36 CH40 CH48 CH38 CH46 CH42 Test Channel CH 149 CH 157 CH 165 CH 149 CH 157 CH 165 CH 151 CH 159 CH 149 CH 157 CH 165 CH 151 CH 159 CH 155 5180 5200 5240 5180 5200 5240 5190 5230 5180 5200 5240 5190 5230 5210 5745 5785 5825 5745 5785 5825 5755 5795 5745 5785 5825 5755 5795 5775
-
-
-
16.438 16.485 16.615 16.535 16.337 16.575 16.317 16.191 15.086 15.115
-
-
-
16.231 16.340 16.342 15.221 15.106 16.106 16.161 16.195 14.428 14.320 TX 802.11 n20M Mode TX 802.11 n40M Mode TX 802.11 AC20M Mode TX 802.11 AC40M Mode TX 802.11 AC80M Mode 10.530 10.420 13.486 13.72 13.69 13.35 13.570 13.760 14.080 13.870 13.570 13.840 13.540 13.250 12.140 12.110 14.15 14.29 13.38 13.31 13.37 13.22 12.28 12.16 13.14 13.21 13.22 11.58 11.34 13.68 13.47 13.42 13.280 13.170 13.070 13.150 13.070 13.270 13.060 13.110 12.010 12.100 13.36 13.11 13.37 13.13 13.29 13.44 12.14 12.03 13.05 13.09 13.15 11.25 11.28 TX 802.11 n20M Mode TX 802.11 n40M Mode TX 802.11 AC20M Mode TX 802.11 AC40M Mode TX 802.11 AC80M Mode 10.02 10.1 13.070 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 52 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 9. PEAK POWER SPECTRAL DENSITY TEST 9.1. Limits In addition, the maximum power spectral density shall not exceed 11 dBm in any 1 megahertz band. In addition, the maximum power spectral density shall not exceed 30 dBm in any 500 kHz band. 9.2. Test setup 1. Place the EUT on the table and set it in transmitting mode. 2. The testing follows FCC KDB 789033 D02 General UNII Test Procedures New Rules v01. 3. Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to Spectrum. 4. For U-NII1, U-NII-2A, U-NII-2C Band:
Set RBW=1MHz, VBW=3MHz, where span is enough to capture the entire bandwidth, Sweep time = Auto (601 pts), detector = sample, traces 100 sweeps of video averaging. (SA-2 with the omission of procedure x, the integration with 26dB EBW bandwidth) For U-NII-3 Band:
Set RBW=510 kHz, VBW=3*RBW, where span is enough to capture the entire bandwidth, Sweep time = Auto (601 pts), detector = sample, traces 100 sweeps of video averaging. (SA-2 with the omission of procedure x, the integration with 26dB EBW bandwidth) 5. User the cursor on spectrum to peak search the highest level of trace 6. Record the max. reading and add 10 log(1/duty cycle). Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 53 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 9.3. Test data Test data as below Mode Frequenc y Measured Power Density
(dBm/MHz) Total power density
(dBm/MHz) Calculate power density
(dBm/MHz)(Note 1) Limit
(dBm/MH Result 5185 5200 5240 5185 5200 5240 5190 5230 5185 5200 5240 5190 5230 5210 MHz 802.11 a 802.11 n20 802.11 n40 802.11 AC20 802.11 AC40 802.11 AC80 ANT 1 1.532 1.500 1.935 1.253 1.178 1.778
-2.749
-4.170 1.130 1.290 1.912
-2.872
-2.620
-1.400 ANT 2 1.264 1.251 1.119 2.386 1.569 1.717
-1.780
-3.936 1.036 0.763 1.404
-3.761
-3.323
-1.094
-
-
-
4.867 4.388 4.758 0.773
-1.041 4.094 4.045 4.676
-0.283 0.053 1.766 ANT 1 ANT 2
-
-
-
-
-
-
4.867 4.388 4.758 0.773
-1.041 4.094 4.045 4.676
-0.283 0.053 1.766 11 11 11 11 11 11 11 11 11 11 11 11 11 11 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 54 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11a) PSD plot on channel 149
(802.11n20) PSD plot on channel 149 Antenna 1
(802.11a) PSD plot on channel 157
(802.11n20) PSD plot on channel 157
(802.11a) PSD plot on channel 165
(802.11n20) PSD plot on channel 165 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 55 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Antenna 1
(802.11n40) PSD plot on channel 38
(802.11ac20) PSD plot on channel 36
(802.11n40) PSD plot on channel 46
(802.11ac20) PSD plot on channel 40
(802.11ac20) PSD plot on channel 48 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 56 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11ac40) PSD plot on channel 38
(802.11ac80) PSD plot on channel 42 Antenna 1
(802.11ac40) PSD plot on channel 46 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 57 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11a) PSD plot on channel 149
(802.11n20) PSD plot on channel 149 Antenna 2
(802.11a) PSD plot on channel 157
(802.11a) PSD plot on channel 165
(802.11n20) PSD plot on channel 157
(802.11n20) PSD plot on channel 165 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 58 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Antenna 2
(802.11n40) PSD plot on channel 38
(802.11ac20) PSD plot on channel 36
(802.11n40) PSD plot on channel 46
(802.11ac20) PSD plot on channel 40
(802.11ac20) PSD plot on channel 48 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 59 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11ac40) PSD plot on channel 38
(802.11ac80) PSD plot on channel 42 Antenna 2
(802.11ac40) PSD plot on channel 46 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 60 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Mode Frequency Measured Power Density
(dBm/500kHz) ANT A 1.662 0.727
-0.121 1.568 1.029 0.071
-3.637
-4.170 1.007 1.205 0.515
-3.365
-4.136 ANT B 1.273 0.668 0.582 1.370 1.508 1.378
-1.839
-3.791
-0.402
-0.373
-0.131
-4.076
-4.301 5745 MHz 5785 MHz 5825 MHz 5745 MHz 5785 MHz 5825 MHz 5755 MHz 5795 MHz 5745 MHz 5785 MHz 5825 MHz 5755 MHz 5795 MHz 5775 MHz
-4.156
-3.921 Total power density Calculate power density Limit
(dBm/500kHz)
(dBm/500kHz)(Note 1)
(dBm/500kH Result
-
-
-
4.480 4.285 3.784 0.365
-0.966 3.370 3.498 3.214
-0.696
-1.207
-1.027 ANT A ANT B
-
-
-
-
-
-
4.480 4.285 3.784 0.365
-0.966 3.370 3.498 3.214
-0.696
-1.207
-1.027 30 30 30 30 30 30 30 30 30 30 30 30 30 30 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS 802.11 a 802.11 n20 802.11 n40 802.11 AC20 802.11 AC40 802.11 AC80 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 61 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11a) PSD plot on channel 149
(802.11n20) PSD plot on channel 149 Antenna 1
(802.11a) PSD plot on channel 157
(802.11a) PSD plot on channel 165
(802.11n20) PSD plot on channel 157
(802.11n20) PSD plot on channel 165 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 62 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11n40) PSD plot on channel 151
(802.11ac20) PSD plot on channel 149 Antenna 1
(802.11n40) PSD plot on channel 159
(802.11ac20) PSD plot on channel 157
(802.11ac20) PSD plot on channel 165 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 63 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11ac40) PSD plot on channel 151
(802.11ac80) PSD plot on channel 155 Antenna 1
(802.11ac40) PSD plot on channel 159 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 64 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11a) PSD plot on channel 149
(802.11n20) PSD plot on channel 149 Antenna 2
(802.11a) PSD plot on channel 157
(802.11a) PSD plot on channel 165
(802.11n20) PSD plot on channel 157
(802.11n20) PSD plot on channel 165 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 65 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11n40) PSD plot on channel 151
(802.11ac20) PSD plot on channel 149 Antenna 2
(802.11n40) PSD plot on channel 159
(802.11ac20) PSD plot on channel 157
(802.11ac20) PSD plot on channel 165 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 66 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E
(802.11ac40) PSD plot on channel 151
(802.11ac80) PSD plot on channel 155 Antenna 2
(802.11ac40) PSD plot on channel 159 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 67 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 10. DUTY CYCLE TEST SIGNAL Pre-analysis Check: While conducting average power measurement, duty cycle of each mode shall be checked to ensure its duty cycle in order to compensate for the loss due to insufficient ratio of duty cycle. All duty cycle is pre-scanned, and result as obtained below shows only the most representative ones where duty cycle is conducted as the given transmission with given virtual operation that expresses the percentage. Formula:
Duty Cycle = Ton / (Ton+Toff) Measurement Procedure:
1. Set span = Zero 2. RBW = 8MHz 3. VBW = 8MHz, 4. Detector = Peak Duty Cycle:
Operation Mode Duty Cycle Duty Fator (dB) 10 * log (1/ Duty cycle) 802.11a 802.11n(HT20) 802.11ac 802.11n(HT40) 802.11ac(HT40) 802.11ac(HT80) 100%
100%
100%
100%
100%
100%
0 0 0 0 0 0 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 68 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 11. FREQUENCY STABILITY 11.1. Limits Manufacturers of U-NII devices are responsible for ensuring frequency stability such that an emission is maintained within the band of operation under all conditions of normal operation as specified in the users manual. 11.2. Test setup 1. The EUT was placed inside temperature chamber and powered and powered by nominal DC voltage. 2. Set EUT as normal operation. 3. Turn the EUT on and couple its output to spectrum. 4. Turn the EUT off and set the chamber to the highest temperature specified. 5. Allow sufficient time (approximately 30 min) for the temperature of the chamber to stabilize, turn the EUT and measure the operating frequency. 6. Repeat step with the temperature chamber set to the lowest temperature. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 69 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 11.3. Test data Temperature 25 Pressure 1015 hPa Test Mode Ant.1 TX Voltage vs. Frequency Stability Relative Humidity 56%
Test Voltage DC 5V Reference Frequency5180MHz Max. Deviation
(MHz) 0.01189 0.01053 0.01137 20 ppm Complies Max. Deviation
(ppm)
-2.2954
-2.0328
-2.1950 TEST CONDITIONS f fc T nom
(C) 20 V nom (V) 5.00 5180.01189 V max (V) 5.75 5180.01053 V min (V) 4.25 5180.01137 5180 5180 5180 Limits Result Temperature vs. Frequency Stability TEST CONDITIONS f fc Reference Frequency5180MHz Max. Deviation
(MHz) 0.00369 0.00265 0.01682 0.01132 0.01196 0.01271 0.01211 0.01234 0.01349 0.01695 5180 5180 5180 5180 5180 5180 5180 5180 5180 5180 20 ppm Complies Max. Deviation
(ppm)
-0.7124
-0.5116
-3.2471
-2.1853
-2.3089
-2.4537
-2.3378
-2.3822
-2.6042
-3.2722 V nom
(V) 5
-20
-10 0 10 20 30 40 50 60 70 5180.00369 5180.00265 5180.01682 5180.01132 5180.01196 5180.01271 5180.01211 5180.01234 5180.01349 5180.01695 T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) Limits Result Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 70 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Voltage vs. Frequency Stability TEST CONDITIONS f fc T nom
(C) 20 V nom (V) 5.00 5200.01105 V max (V) 5.75 5200.00795 V min (V) 4.25 5200.01168 5200 5200 5200 Limits Result Temperature vs. Frequency Stability Reference Frequency5200MHz Max. Deviation
(MHz) 0.01105 0.00795 0.01168 20 ppm Complies Max. Deviation
(ppm)
-2.1250
-1.5288
-2.2462 Reference Frequency5200MHz TEST CONDITIONS f fc V nom
(V) 5
-20
-10 0 10 20 30 40 50 60 70 5200.00264 5200.00167 5200.01639 5200.01183 5200.01114 5200.01251 5200.01211 5200.01236 5200.01408 5200.00530 T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) Limits Result 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 Max. Deviation
(MHz) 0.00264 0.00167 0.01639 0.01183 0.01114 0.01251 0.01211 0.01236 0.01408 0.00530 Max. Deviation
(ppm)
-0.5077
-0.3212
-3.1519
-2.2750
-2.1423
-2.4058
-2.3288
-2.3769
-2.7077
-1.0192 20 ppm Complies Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 71 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Voltage vs. Frequency Stability Reference Frequency5240MHz Max. Deviation
(MHz) 0.02264 0.02165 0.02259 20 ppm Complies Max. Deviation
(ppm)
-4.3206
-4.1317
-4.3111 TEST CONDITIONS f fc T nom
(C) 20 V nom (V) 5.00 5240.02264 V max (V) 5.75 5240.02165 V min (V) 4.25 5240.02259 5240 5240 5240 Limits Result Temperature vs. Frequency Stability TEST CONDITIONS f fc Reference Frequency5240MHz Max. Deviation
(MHz) 0.00603 0.00147 0.01257 0.01145 0.01752 0.02116 0.02054 0.02468 0.02273 0.02253 5240 5240 5240 5240 5240 5240 5240 5240 5240 5240 20 ppm Complies Max. Deviation
(ppm)
-1.1508
-0.2805
-2.3989
-2.1851
-3.3435
-4.0382
-3.9198
-4.7099
-4.3378
-4.2996 V nom
(V) 5
-20
-10 0 10 20 30 40 50 60 70 5240.00603 5240.00147 5240.01257 5240.01145 5240.01752 5240.02116 5240.02054 5240.02468 5240.02273 5240.02253 T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) Limits Result Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 72 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Voltage vs. Frequency Stability Reference Frequency5745MHz Max. Deviation
(MHz) 0.01134 0.00882 0.01045 20 ppm Complies Max. Deviation
(ppm)
-1.9739
-1.5352
-1.8190 TEST CONDITIONS f fc T nom
(C) 20 V nom (V) 5.00 5745.01134 V max (V) 5.75 5745.00882 V min (V) 4.25 5745.01045 5745 5745 5745 Limits Result Temperature vs. Frequency Stability TEST CONDITIONS f fc Reference Frequency5745MHz Max. Deviation
(MHz) 0.01014 0.01042 0.01335 0.01021 0.01134 0.01252 0.01317 0.01243 0.01314 0.01462 5745 5745 5745 5745 5745 5745 5745 5745 5745 5745 20 ppm Complies Max. Deviation
(ppm)
-1.7650
-1.8138
-2.3238
-1.7772
-1.9739
-2.1793
-2.2924
-2.1636
-2.2872
-2.5448 V nom
(V) 5
-20
-10 0 10 20 30 40 50 60 70 5745.01014 5745.01042 5745.01335 5745.01021 5745.01134 5745.01252 5745.01317 5745.01243 5745.01314 5745.01462 T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) Limits Result Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 73 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Voltage vs. Frequency Stability Reference Frequency5785MHz TEST CONDITIONS f fc T nom
(C) 20 V nom (V) 5.00 5785.02264 V max (V) 5.75 5785.02165 V min (V) 4.25 5785.02259 5785 5785 5785 Limits Result Temperature vs. Frequency Stability Max. Deviation
(MHz) 0.02264 0.02165 0.02259 20 ppm Complies Max. Deviation
(ppm)
-3.9136
-3.7424
-3.9049 Reference Frequency5785MHz TEST CONDITIONS f fc V nom
(V) 5
-20
-10 0 10 20 30 40 50 60 70 5785.00163 5785.00414 5785.01352 5785.01138 5785.01169 5785.02189 5785.02024 5785.01561 5785.02532 5785.02157 T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) Limits Result 5785 5785 5785 5785 5785 5785 5785 5785 5785 5785 Max. Deviation
(MHz) 0.00163 0.00414 0.01352 0.01138 0.01169 0.02189 0.02024 0.01561 0.02532 0.02157 20 ppm Complies Max. Deviation
(ppm)
-0.2818
-0.7156
-2.3371
-1.9672
-2.0207
-3.7839
-3.4987
-2.6984
-4.3768
-3.7286 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 74 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Voltage vs. Frequency Stability Reference Frequency5825MHz Max. Deviation
(MHz) 0.00236 0.00178 0.00667 20 ppm Complies Max. Deviation
(ppm)
-0.4052
-0.3056
-1.1451 TEST CONDITIONS f fc T nom
(C) 20 V nom (V) 5.00 5825.00236 V max (V) 5.75 5825.00178 V min (V) 4.25 5825.00667 5825 5825 5825 Limits Result Temperature vs. Frequency Stability TEST CONDITIONS f fc
-20
-10 0 10 20 30 40 50 60 70 5825.01147 5825.00375 5825.01081 5825.01123 5825.01176 5825.01024 5825.01246 5825.01362 5825.00354 5825.01414 T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) Limits Result V nom
(V) 5 Reference Frequency5825MHz Max. Deviation
(MHz) 0.01147 0.00375 0.01081 0.01123 0.01176 0.01024 0.01246 0.01362 0.00354 0.01414 5825 5825 5825 5825 5825 5825 5825 5825 5825 5825 20 ppm Complies Max. Deviation
(ppm)
-1.9691
-0.6438
-1.8558
-1.9279
-2.0189
-1.7579
-2.1391
-2.3382
-0.6077
-2.4275 Note: This EUT was tested in 802.11a/n/ac(HT20), n/ac(HT40), ac(HT80) mode and 802.11a the worst case position data was reported. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 75 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Relative Humidity 56%
Test Voltage DC 5V Temperature 25 Pressure 1015 hPa Test Mode Ant.2 TX Voltage vs. Frequency Stability Reference Frequency5180MHz Max. Deviation
(MHz) 0.01234 0.00756 0.01134 20 ppm Complies Max. Deviation
(ppm)
-2.3822
-1.4595
-2.1892 TEST CONDITIONS f fc T nom
(C) 20 V nom (V) 5.00 5180.01234 V max (V) 5.75 5180.00756 V min (V) 4.25 5180.01134 5180 5180 5180 Limits Result Temperature vs. Frequency Stability TEST CONDITIONS f fc Reference Frequency5180MHz Max. Deviation
(MHz) 0.00154 0.00178 0.01563 0.01142 0.01162 0.01258 0.01212 0.01243 0.01319 0.01424 5180 5180 5180 5180 5180 5180 5180 5180 5180 5180 20 ppm Complies Max. Deviation
(ppm)
-0.2973
-0.3436
-3.0174
-2.2046
-2.2432
-2.4286
-2.3398
-2.3996
-2.5463
-2.7490 V nom
(V) 5
-20
-10 0 10 20 30 40 50 60 70 5180.00154 5180.00178 5180.01563 5180.01142 5180.01162 5180.01258 5180.01212 5180.01243 5180.01319 5180.01424 T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) Limits Result Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 76 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Voltage vs. Frequency Stability Reference Frequency5200MHz Max. Deviation
(MHz) 0.02310 0.02162 0.02212 20 ppm Complies Max. Deviation
(ppm)
-4.4423
-4.1577
-4.2538 TEST CONDITIONS f fc T nom
(C) 20 V nom (V) 5.00 5200.02310 V max (V) 5.75 5200.02162 V min (V) 4.25 5200.02212 5200 5200 5200 Limits Result Temperature vs. Frequency Stability TEST CONDITIONS f fc Reference Frequency5200MHz Max. Deviation
(MHz) 0.00524 0.00634 0.01841 0.01137 0.01257 0.01113 0.02047 0.02564 0.02347 0.02269 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 20 ppm Complies Max. Deviation
(ppm)
-1.0077
-1.2192
-3.5404
-2.1865
-2.4173
-2.1404
-3.9365
-4.9300
-4.5135
-4.3635 V nom
(V) 5
-20
-10 0 10 20 30 40 50 60 70 5200.00524 5200.00634 5200.01841 5200.01137 5200.01257 5200.01113 5200.02047 5200.02564 5200.02347 5200.02269 T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) Limits Result Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 77 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Voltage vs. Frequency Stability Reference Frequency5240MHz Max. Deviation
(MHz) 0.00132 0.00126 0.00458 20 ppm Complies Max. Deviation
(ppm)
-0.2519
-0.2405
-0.8740 TEST CONDITIONS f fc T nom
(C) 20 V nom (V) 5.00 5240.00132 V max (V) 5.75 5240.00126 V min (V) 4.25 5240.00458 5240 5240 5240 Limits Result Temperature vs. Frequency Stability TEST CONDITIONS f fc Reference Frequency5240MHz Max. Deviation
(MHz) 0.01239 0.00357 0.01134 0.01246 0.01136 0.01324 0.01234 0.01124 0.00316 0.01132 5240 5240 5240 5240 5240 5240 5240 5240 5240 5240 20 ppm Complies Max. Deviation
(ppm)
-2.3645
-0.6813
-2.1641
-2.3779
-2.1679
-2.5267
-2.3550
-2.1450
-0.6034
-2.1603 V nom
(V) 5
-20
-10 0 10 20 30 40 50 60 70 5240.01239 5240.00357 5240.01134 5240.01246 5240.01136 5240.01324 5240.01234 5240.01124 5240.00316 5240.01132 T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) Limits Result Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 78 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Voltage vs. Frequency Stability Reference Frequency5745MHz Max. Deviation
(MHz) 0.01133 0.00453 0.01287 20 ppm Complies Max. Deviation
(ppm)
-1.9721
-0.7885
-2.2402 TEST CONDITIONS f fc T nom
(C) 20 V nom (V) 5.00 5745.01133 V max (V) 5.75 5745.00453 V min (V) 4.25 5745.01287 5745 5745 5745 Limits Result Temperature vs. Frequency Stability TEST CONDITIONS f fc Reference Frequency5745MHz Max. Deviation
(MHz) 0.00122 0.00142 0.01344 0.01016 0.01213 0.01314 0.01271 0.01134 0.01483 0.01542 5745 5745 5745 5745 5745 5745 5745 5745 5745 5745 20 ppm Complies Max. Deviation
(ppm)
-0.2124
-0.2472
-2.3394
-1.7685
-2.1114
-2.2872
-2.2124
-1.9739
-2.5814
-2.6841 V nom
(V) 5
-20
-10 0 10 20 30 40 50 60 70 5745.00122 5745.00142 5745.01344 5745.01016 5745.01213 5745.01314 5745.01271 5745.01134 5745.01483 5745.01542 T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) Limits Result Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 79 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Voltage vs. Frequency Stability Reference Frequency5785MHz Max. Deviation
(MHz) 0.02225 0.02145 0.02253 20 ppm Complies Max. Deviation
(ppm)
-3.8462
-3.7079
-3.8946 TEST CONDITIONS f fc T nom
(C) 20 V nom (V) 5.00 5785.02225 V max (V) 5.75 5785.02145 V min (V) 4.25 5785.02253 5785 5785 5785 Limits Result Temperature vs. Frequency Stability TEST CONDITIONS f fc Reference Frequency5785MHz Max. Deviation
(MHz) 0.00164 0.00435 0.01374 0.01136 0.01151 0.02143 0.02044 0.01563 0.02512 0.02152 20 ppm Complies 5785 5785 5785 5785 5785 5785 5785 5785 5785 5785 Max. Deviation
(ppm)
-0.2835
-0.7519
-2.3751
-1.9637
-1.9896
-3.7044
-3.5333
-2.7018
-4.3423
-3.7200 V nom
(V) 5
-20
-10 0 10 20 30 40 50 60 70 5785.00164 5785.00435 5785.01374 5785.01136 5785.01151 5785.02143 5785.02044 5785.01563 5785.02512 5785.02152 T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) Limits Result Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 80 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Voltage vs. Frequency Stability Reference Frequency5825MHz TEST CONDITIONS f fc T nom
(C) 20 V nom (V) 5.00 5825.00197 V max (V) 5.75 5825.00139 V min (V) 4.25 5825.00724 5825 5825 5825 Limits Result Temperature vs. Frequency Stability Max. Deviation
(MHz) 0.00197 0.00139 0.00724 20 ppm Complies Max. Deviation
(ppm)
-0.3382
-0.2386
-1.2429 Reference Frequency5825MHz Max. Deviation
(MHz) 0.02011 0.00451 0.01085 0.01120 0.02076 0.01527 0.01530 0.01169 0.00427 0.01094 20 ppm Complies Max. Deviation
(ppm)
-3.4524
-0.7742
-1.8627
-1.9227
-3.5639
-2.6215
-2.6266
-2.0069
-0.7330
-1.8781 TEST CONDITIONS V nom
(V) 5 T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) T (C) Limits Result f 5825.02011 5825.00451 5825.01085 5825.01120 5825.02076 5825.01527 5825.01530 5825.01169 5825.00427 5825.01094
-20
-10 0 10 20 30 40 50 60 70 fc 5825 5825 5825 5825 5825 5825 5825 5825 5825 5825 Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 81 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 12. ANTENNA REQUIREMENT 12.1. STANDARD REQUIREMENT 15.203 requirement: For intentional device, according to 15.203: an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. 12.2. EUT ANTENNA The EUT antenna is External antenna, It comply with the standard requirement. Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 82 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 13. PHOTOGRAPHS OF TEST SET-UP Conducted Emission Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 83 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Radiated Emission Test Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 84 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 85 of 86 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC-LH190500195-2E 14. EUT PHOTO
------END------
Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.A.0 Page 86 of 86
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2019-08-05 | 5180 ~ 5240 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2019-08-05
|
||||
| 1 | Applicant's complete, legal business name |
Shenzhen Century Xinyang Tech Co., Ltd
|
||||
| 1 | FCC Registration Number (FRN) |
0020939831
|
||||
| 1 | Physical Address |
Room3001~3002, East Tower 30/F Nanshan Software Park
|
||||
| 1 |
Room3001~3002, East Tower 30/F
|
|||||
| 1 |
Shenzhen, N/A
|
|||||
| 1 |
China
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
j******@metlabs.com
|
||||
| 1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
ZNP
|
||||
| 1 | Equipment Product Code |
WD-R1200U
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
W******** T******
|
||||
| 1 | Title |
Manager
|
||||
| 1 | Telephone Number |
+86-7********
|
||||
| 1 | Fax Number |
+86-7********
|
||||
| 1 |
s******@sztianhao.com
|
|||||
| app s | Technical Contact | |||||
| 1 | Firm Name |
Shenzhen BCTC Testing Co., Ltd.
|
||||
| 1 | Name |
A**** M****
|
||||
| 1 | Physical Address |
BCTC Bldg&1-2F, East of B Bldg,Pengzhou Industrial
|
||||
| 1 |
Baoan District, Shenzhen
|
|||||
| 1 |
China
|
|||||
| 1 | Telephone Number |
86-75********
|
||||
| 1 | Fax Number |
86-75********
|
||||
| 1 |
a******@bctc-lab.com.cn
|
|||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Dual Band WiFi Repeater | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Output Power listed is combined conducted. The device supports 2x2 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports 20MHz and 40MHz and 80MHz bandwidth. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
Shenzhen BCTC Testing Co., Ltd.
|
||||
| 1 | Name |
A****** M****
|
||||
| 1 | Telephone Number |
+8675********
|
||||
| 1 |
a******@bctc-lab.com.cn
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15E | CC MO | 5180 | 5240 | 0.04587 | |||||||||||||||||||||||||||||||||||
| 1 | 2 | 15E | CC MO | 5745 | 5825 | 0.04307 | |||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC