FCC ID: 2AWCY-L05 Smart led bulb

GUOJIAJIA

>Functional Smart led bulb 1. Color temperature,Color, brightness, saturation can be adjusted 2.APP (IOS & Android) remote control 3. Support Amazon Echo, Google Assistant, TmallGenie voice control, IFTTT 4. Timing control, grouping control 5. One-key scene, automatic scene 6. Device sharing control, home sharing control 7.16 million colors + cool colors +warm colors

> Parameter Input Voltage:AC110~250V 50/60Hz Wi Type: 2.4GHz 802.11b/g/n Working Temp:-20~50C MODEL:L05W User Manual

-01-

> Install the APP"Cloud Intelligence You may nd the APP. "Cloud Intelligence"

on Apple App store, Google Play,or Scan the QR code below and install it. The free app "Cloud Intelligence"is compatible with mobile devices that support iOS 8.0 above. Android 4. 4 above.

>Connecting Your Bulb to a Wi-Fi Network Follow the on-screen instructions to register and login to set your smart home. A. Easy Mode(Recommend) 1. Disconnect the power and install the bulb. 2. Turn on the power and you will see the light of the bulb ash (twice per second). If not, please perform the power on and off within ten seconds, and perform this oper

-ation three times in succession (according to the APP guide) to make it ash slowly. 3. Open the "Cloud Intelligence" APP, click

"Add Device" or "+" in the upper right corner of the page, and select "Manual Add"(pic1-2) 4. Then select Bulb Light to ensure the light cycle ashes and conrm in the applic

-ation (Note: After the light ashes for 5 se

-conds, turn on the light bulb again, it will automatically switch to the last control state, then exit the add device status. )(pic3)

-02-

-03-

5. Select local WIFI and enter the correct password. (The device only supports 2.4 Ghz WIFI), click "Next"

6. Click "Conrm, Next"(pic 4) 7. Wait for the device to be added successfu

-lly (pic5-6)

-04-

-05-

B. Nearby device mode

>Control Your Smart Bulb in APP 1.If the connection fails in "Easy Mode", change to "Nearby Device Mode" and the mode is on the "Add Device" page. 2. Please turn on / off the light within ten seco

-nds, and perform it three times in succession

(according to the APP guide) to make it ash slowly, and then the corresponding bulb light that needs to be added will appear in the app, click "

3. Select local WiFi and enter the correct pass

-word, click "Next"

4. Click "Conrm, Next"

5. Wait or the device to be added successfully

(APP control interface) Note: The instructions in this manual are for your reference only. The app will be updated from time to time. Always follow the instructions in the app to complete Wi-Fi setup and know more about the functions.

-06-

-07-

> Control Your Smart Bulb with Alexa /Google Assistant/IFTTT Set
light
to
cool
white
when
rain
comes Dim
the
light
at
9
PM Power
on
your
outlet
at
sunset. IFTTT voice speaker settings Amazon Echo speaker settings 1.Bind
device Purchase
a
device
that
supports
the
"Cloud

Intelligence"
APP
binding,
add
it
to
the
device

list
on
the
homepage,
and
rename
it,
such
as

"My
Light". 2.Create
Applet You
must
rst
download
the
IFTTT
APP
and

create
a
New
Applet,
using
the
device
as
a

trigger
or
action. 3.Have
foundCloud Intelligence Search
for
Service
"Cloud
Intelligence",

enterthe
account
number
and
password

of
the
"Cloud
Intelligence"
APP,
and
asso

-ciate"Cloud
Intelligence"
with
"IFTTT". 4.Complete
automation
setup After
the
association,
you
can
set
the
device

bound
to
the
"Cloud
Intelligence"
APP
to

Trigger
or
Action,
and
build
your
own
cloud

intelligence,
such
as:

1.Bind
device Purchase
a
device
that
supports
the
"Cloud

Intellgence"
APP
binding,
add
it
to
the
device

list
on
the
homepage,
and
rename
it,
such
as

"My
Light". 2.
Turn
on
"Cloud
Intelligence"
skills
(Pic8-10) You
have
to
own
an
Amazon
Echo
speaker,

then
search
for
"Cloud
Intelligence"
in
the

Skills
of
the
Alexa
app
and
click
"Enable". 3.Linked
account Enter
the
account
and
password
of
the

"Cloud
Intelligence"
APP
to
associate

"Cloud
Intelligence"
with
"Alexa".(pic11) 4.Voice
control
equipment(Pic
12) After
association,
you
can
perform
voice

control
on
the
devices
bound
to
the
"Cloud

Intelligence"
APP,
such
as:

"Alexa,
turn
on
/
o
my
light."

-08-

-09-

Alexa,
brighten
/
dim
my
light."

"Alexa,
set
my
light
to
yellow."

"Alexa,
set
my
light
to
warm
white."

11 1 2

-11-

-10-

Google Home speaker settings

>Troubleshooting 1.Bind
device Purchase
a
device
that
supports
the
"Cloud

Intelligence"
APP
binding,
add
it
to
the
device

list
on
the
homepage,
and
rename
it,
such
as

"My
Light". 2.
Turn
on
"Cloud
Intelligence"
skills You
have
to
have
a
Google
Home
speaker,

then
search
for
"Cloud
Intelligence"
in
the

Home
control
of
the
Google
Home
(or
Google

Assistant)
app. 3.Linked
account

Enter
the
account
and
password
of
the

"Cloud
Intelligence"
APP
to
associate

"Cloud
Intelligence"
with
"Google
Assistant". 4.Voice
control
equipment After association, you can perform voice control on the devices bound to the "Cloud Intelligence" APP, such as:

"OK, Google, turn on / off my lights."

"OK, Google, dim my lights to fty percent."

"OK, Google, turn my lights [color]."

"OK, Google, lock the front door."

1. Cannot connect to Wi-Fi Check if you have selected a 2.4 GHz wi which is the same that your phone is con

-nected with.(If your router is dual band, make sure your phone and the smart bulb are connected to the 2. 4 G signal.) Check if you have entered the correct Wi Fi password. try again. Check if there are any internet problems. If necessary, reset your Wi-Fi router and 2. Cannot control the devices with Alexa/

Google voice control. Check if there are any internet problems Check if you have enabled"Cloud intellig

-ence" in Alexa or Google APP. Check if you are using proper commands when talking to Alexa/Google Assistant, repeat your question, speak clearly to Alexa/ Google Assistant in English. Check if you have modied the name of

-12-

-13-

of the bulb in "Cloud intelligence"app. If yes, FCC Caution: Any changes or modications you need to rediscover the devices through not expressly approved by the party Alexa/ Google app.

> Notice Please check if there is damage caused by transportation.If broken, please contact supplier for replacement. Please follow the instruction and notice to keep product in a good and safe use condition. Do not disassemble or reinstall the bulb.

> Customer Service 12-month limited warranty Lifetime technical support service@gjj-iot.com For any inquiries or comments concerning this product, please do not hesitate to contact the seller. We appreciate your support!

responsible for compliance could void the user's authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

-14-

-15-

installation. This equipment generates, from that to which the receiver is connected. uses and can radiate radio frequency

-- Consult the dealer or an experienced energy and, if not installed and used in radio/TV technician for help. accordance with the instructions, may To maintain compliance with FCCs RF cause harmful interference to radio Exposure guidelines, This equipment communications. However, there is no should be installed and operated with guarantee that interference will not occur in minimum distance between 20cm the a particular installation. radiator your body: Use only the supplied If this equipment does cause harmful antenna. interference to radio or television reception, FCC ID: 2AWCY-L05 which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different

-16-

-17-

29.50 mm SMART LED BULD Model:L05 10W E27 F RGB&2800~6500K 110~250V AC 850LM FCC ID:2AWCY-L05 m m 0 0

. 1 2 SMART LED BULD Model:L05 10W E27 F RGB&2800~6500K 110~250V AC 850LM FCC ID:2AWCY-L05

Shenzhen Chaoran Technology Co., Ltd. Declaration concerning Antenna Specification It is hereby declared that the product Model No.: L05,L05W, GJJ-L05W-001D, GJJ-L05W-001F, GJJ-L05W-001, GJJ-L05W-002, L05W-001D, L05W-001F, L05W-001,L05W-002, L04, L04W, GJJ-L04W-001, GJJ-L04W-002, L04W-001, L04W-002, L02, L02W, GJJ-L02W-001, GJJ-L02W-002, L02W-001, L02W-002 FCC ID:

2AWCY-L05 fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for internal antenna type(s) described below:

Model No. of antenna: N/A Type of antenna:

PCB Antenna (1/4 wave antenna) built into the housing) WIFI:

Gain of the antenna:

Frequency range:

1.5 dBi 2412 to 2462 MHz The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name: Shenzhen Chaoran Technology Co., Ltd. Address:

City:

ZIP / Postal code:

Country:

China Building 20, Tongfuyu Industrial Zone, Kengzi Longtian, Pingshan New District, Shenzhen Place:

Tel Aviv Date: 05/20/2020 Name: Emily mou Signature:

version01