INTRODUCTION Thank you for purchasing our latest DECT single phone, the manual is designed to familiarize you with this phone. To get the maximum use from the phone, we suggest that you read this instruction manual carefully before using. SAFETY INSTRUCTION When using your telephone equipment, the following basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons:
Read, understand and follow all warnings and instructions Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a soft damp cloth for cleaning. Do not place this product on unstable surfaces. The product may drop, causing serious damage to the product. Do not overload wall outlets and extension cords as this can result in fire or electric shock. Never push foreign objects of any kind into this product through cabinet slots as they may affect dangerous voltage points or short circuit parts that could result in fire or electric shock. Never spill liquid of any kind on the product. Avoid moving or disconnecting this unit during a heavy storm, as there may be a remote risk of electric shock from lightning and thunder. IMPORTANT The base unit must be used with the mains adapter supplied with the unit. Using any other adapter will may invalidate any approval given to this apparatus. Unprofessional person cannot open the telephone even meets troubles, please send to service center. PACKAGE INCLUSION Base unit, handset, AC/DC adapter, Ni-MH AAA batteries ,line cord,users manual,warranty card FEATURES LCD 3 lines display Maximum 5 handsets can be registered to the same base unit, and maximum 4 bases per handset 16 kinds of interface languages: Portuguese, Spanish, English, French, German, Italian, Dutch, Hungarian, Greek, Polish, Danish, Norwegian, Swedish, Turkish, Russian and Ukrainian Pre-dial and edit function Redial and pause function 30 incoming numbers memories and 10 outgoing numbers memories 50 phone book memories with 12 characters & 20 digits maximum Call transfer to other handset and intercom call between two handsets Conference call between external call and two handsets 10 ringing tones for selection Ringing tone/earpiece/hands-free volume adjustable Different melody for different call available Alarm clock function 1 Tone/Pulse dialing mode can be set Flash time 100/300/600 for selection LCD backlight function Auto/manual answering function Dialing barring function Keypad lock function In use and charge LED indicator LCD LAYOUT AND PHONE LAYOUT Icon Description ANTENNA Function The antenna icon will always be shown on the LCD, it indicates for signal strength, icon flashes: the handset is out of range, searching signal of base. Icon is gone : the registration base is lost. The icon will be displayed in handset mode. The alarm icon will be shown when the alarm is set on available . The alarm icon will flash when the alarm is triggered. TALK ALARM RINGER OFF The phone is in DO-NOT-DISTURB mode and will not ring for new calls. PHONEBOOK The icon will be displayed when viewing the phone book entries. VOICE MAIL The icon will be displayed when new voice message is received from the network. NEW CALL SPEAKER BATTERY Intercom The icon will be displayed when a new call comes The icon will be displayed in speaker mode Charging indication and indication of the current battery status. The icon will be displayed when making an intercom call Phone Layout 2 SN Icon Description Function Definition Receiver Working in handset talking mode 1 2 3 4 5 6 7 8 9 M1/M2/
M3 LCD One-touch memories Up Menu/OK R/CLR Recall /Clear Handset mode Speaker mode Down Ring on/off Display menu,calls and relative information. Enter the number and hold M1/M2/M3 to store the number. Press M1/M2/M3 to make a call fast. In standby mode, press one to access outgoing calls memory. In menu setting state, press to scroll up the menu setting / options In talking mode ,press to increase the volume Press once to access the menu setting Press to confirm selection & value setting. When dialing or editing phone book, press to delete the input. In talking mode ,press to transfer the call to extension In standby state press once to enter the handset talking mode. In handset mode, press once to enter speaker talking mode. In standby mode, press one to access incoming calls memory. In menu setting state, press to scroll down the menu setting / options In talking mode ,press to decrease the volume In addition to its use for text and number entry;
Press and hold to switch the handset external call ring on/off 10 1-0 10 Number keys Enter numbers or letters 3 11 INT Intercom 12 Phone book/Back 13 RD/P Redial/Pause 14 15 16 17 LED End/Power off Keypad lock Microphone Taking Charging Paging To set up an internal call to another handset;
To transfer an incoming call to another handset;
To set up a conference call with an external line and an internal handset. In standby mode,press once to access the phone book memory In menu setting state, press once to go back last menu setting. When dialing, press to insert pause time 3.6S between two digits. In handset talking mode, press to redial the last dialed number. In talking mode, press once to hang up the call;
In standby mode, hold for 3 seconds to shut down the handset. A Long press to activate keypad lock;
To set up a conference call. When the handset is being charged,the LED is red. When the handset is fully charged, the LED will get green from red. When the handset is in talking mode, the LED will get green. When holding page key for 5S, the LED will get green and blinking. 18 19 20 21 22 Speaker Speaker talking mode and new call ringing Battery door Open the battery door and install 2pcs AAA Ni-MH batteries Page Press to page all the handsets and all handsets will be ringing. Register more handset to the current base. DC port DC 6V port LINE Line port Telephone line port Insert one end of the line cord to line port of base unit,insert another end to telephone socket on the wall. Insert the DC plug into the DC port of the base unit and insert AC/DC adapter plug into power socket. INSTALLATION 1) 2) 3) Open the battery door, install the batteries with correct direction(+/-) and then close the battery door. 4) Place the handset correctly on the base charging station and let the battery charged for at least 12 hours for the first using. You hear a beep tone when the handset is correctly in position on the charging cradle. Important Notices:
To keep the batteries charged, whenever you dont need to use the handset (such as overnight, or when you go out), leave the handset on the charge cradle. If you do not modify the password, all the passwords(PIN code) are default as 0000 in this manual. 4 key to enter the menu setting, Menu Settings In standby mode, press Press or key to review the settings, press to back to the previous menu or press Press Note: The phone will exit the setting state after 10 seconds if no any operation. The menu tree as follow:
key again to start the current setting or save the setting. back to idle mode. HANDSET MENU TREE CALL LOG PHONE BOOK BS SETTINGS MISSED RECEIVED DIALED LIST NEW ENTRY EDIT RECORD DEL RECORD DELETE ALL?
MEM STATUS DELETE HS DIAL MODE FLASH TIME MODIFY PIN MEMO ALARM RING SETUP TONE SETUP HS SETTINGS LANGUAGE HS NAME AUTO ANSWER BARRING DATE&TIME CONTRAST SELECT BASE HS DEFAULT REGISTRATION BASE 1(2,3,4) TONE PULSE 100/300/600 default 0000 ON OFF ON OFF INT RING EXT RING KEY TONE BATTERY LOW RANGE ALARM ON OFF OFF, default 0000 BASE 1,2,3,4 and AUTO default 0000 key and LCD displays CALL LOG, press 1: CALL LOG Press MISSED, RECEIVED an DIALED. Note: In idle state, press key once to outgoing calls or press key to review incoming calls directly. 1) Press 2) The LCD will show the last record. (If no record, the LCD will show EMPTY). key to enter missed call list, received call list or dialed call list. key to enter. There are three items in this menu, 5 3) Press or key to view other record. 4) When reviewing the number, press the key to dial out the number automatically. When reviewing the number, press key to add it to Phone book or Delete or Delete All back to idle mode. key to enter. to back to the last menu or press key and press key once to select PHONE BOOK, press 5) Press 2: PHONE BOOK This function allows the user to review/add/edit/delete an entry of the phone book. Each handset has its own phone book, independent from other registered handsets (if existing). Support total 50 entries with max 12 characters, max 20 digits and optional ringtone. Press LIST 1) LCD display LIST. 2) Press or key to review the list of phone book. 3) Choose the number for making a call 4) Press In the idle mode, press Quick search Tip: Press any number key to position the first entry of its first letter. NEW ENTRY Press or key to select NEW ENTRY. 1) Press 2) Enter the name using the alphanumeric keys, press R/CLR key to delete wrong input. 3) Press 4) Enter the number and press R/CLR key to delete wrong input 5) Press 6) Press or key to select the melody 7) Press key to confirm and LCD displays NUMBER ?
key to confirm and LCD displays Melody 1 key to dial out the number automatically. key and the LCD displays NAME ?. key to enter phone book list directly. key to confirm. Input method as follow:
press times 1st 2nd 3rd 4th 5th 6th key 1 2 3 4 5 6 7 8 9
0
C F I L O R V Y 0 1 2 3 4 5 6 S 8 Z 7 9 A D G J M P T W
space
B E H K N Q U X 6 EDIT RECORD Press or key to select EDIT RECORD. 1) Press 2) Press or key to find the entry to be revised. key and the first record will be displayed. Quick search Tip: Press any number key to position the first entry of its first letter. key to confirm. key and LCD displays its name key and LCD displays CONFIRM ?
key to confirm. 3) Press 4) Press R/CLR key to delete and enter new name/number. 5) Press DEL RECORD Press or key to select DEL RECORD. key and the first record will be displayed. 1) Press 2) Press or key to find the entry to be removed. Quick search Tip: Press any number key to position the first entry of its first letter. 3) Press 4) Press DELETE ALL Press or key to select DELETE ALL ?. 1) Press 2) Press 3) Press MEM STATUS Press or key to select MEM STATUS. Press Total 50 entries. 3: BS SETTINGS Press Press DELETE HANDSET This function allows the user to delete new additional handset registration from the base. 1) Press 2) Press 3) 4) Press or key to choose the handset names.Press key, the first show is DELETE HS. key to enter, the user will be prompted to enter the PIN code. key and LCD displays CONFIRM ?
key and LCD displays DELETE ALL ?
key to confirm. key and press key twice,LCD displays BS SETTINGS, key to enter the base setting,press or key to select the setting to change. Input the correct 4-digit pin code (the default PIN code is 0000. key to confirm. key and LCD displays XX/50. Means there are XX entries already in the phone book memory. The handset will be deleted from the registered list on the base, and it will have prompt information - out of range condition. (Default handset will not be deleted) Note: To delete all the handsets registration from the base:
In idle mode, press and hold then press All the handsets have been deleted from the base when the IN USE/CHARGE LED quench. DIAL MODE The user can select to change the mode will dial. key 7 times continuous, the IN USE/CHARGE LED flashes quickly. key for 5s, IN USE/CHARGE LED flashes, 7 key to confirm. key to confirm. key, then press or key to select DIAL MODE item. key to enter, and the display shows TONE. key, then press or key to select FLASH TIME item. key to enter. 1) Press 2) Press 3) Press or key to select TONE or PULSE dial mode. 4) Press Note: According to your telephone lines or PABX systems you may need to change the dialing mode between Tone and Pulse. FLASH TIME The user can select the flash time (100ms, 300ms and 600ms) to meet your telephone line or PABX requirement. 1) Press 2) Press 3) Press or key to select the desired flash time. 4) Press MODIFY PIN Some setting (such as Delete handset and Base default) requires a PIN code before changing. You could change to your personal 4-digit PIN and keep it well.Default PIN code: 0000 1) Press 2) Press 3) Enter the existing PIN code. 4) Press 5) Enter a new PIN code (4 digits) when the LCD shows NEW PIN,press 6) The LCD shows REPEAT, input the new PIN code again. 7) Press BASE DEFAULT This function allows the user to reset the base setting to the factory default. 1) Press 2) Press 3) Enter the PIN code and press key, then press or key to select BS DEFAULT. key to confirm and the LCD shows PIN?
key to confirm. key to confirm. Press or key to select MODIFY PIN item. key to confirm, and the LCD shows PIN?
to confirm. to confirm. to confirm. If the PIN code is correct, all base settings will be reset to the factory default. 4: HS SETTINGS This function allows the user to change the settings of his handset. key and press or key to select HS SETTINGS. Press ALARM This function Alarm is programmed on and will repeat every day. 1) Press 2) Press 3) Press or key to select ON, press 4) The LCD shows 00-00 (HH-MM),press or key to change the time(24 hours) 5) press 6) Press or key to select SNOOZE ON or SNOOZE OFF, press key, the LCD shows ALARM. key to confirm and LCD shows OFF. key to confirm and the LCD will display and SNOOZE ON. key to confirm. key to confirm. 8 Notes:
1) 2) When the phone is ringing for alarm, press If the SNOOZE is ON, the alarm will be repeated about every 5 minutes for nine times key quit the alarm, press other key to pause the key to confirm. SNOOZE function, and the phone will be ringing after 5 minutes. If the SNOOZE is OFF, the phone will be ringing for 45 seconds. key, then press or key to select RING SETUP. key and LCD displays INT RING. 3) RING SETUP This function allows the user to set the ring tones for intercom calls and external calls. Total 10 ring tones with off,1~5 volume levels. 1) Press 2) Press 3) Press or key to select the INT RING or EXT RING or VOLUME. 4) Press 5) Press or key to select the MELODY X (X=1~10) . TONE SETUP This function allows the user to change the handset tone settings. 1) Press 2) Press 3) Press or key to select the KEY TONE or BATTERY LOW, RANGE ALARM . 4) Press 5) Press or key to select the ON or OFF to enable/disable the tone indication. 6) Press Notes:
1) 2) 3) key, then press or key to select TONE SETUP. key to enter and LCD shows KEY TONE . key to confirm. key to confirm. If you turn the tone on for key tone, a beep for key tone will sound when a key is pressed on the handset. If you turn the tone on for battery low warning, a beep will sound when the battery is low. If you turn the tone on for the out of range warning, a beep will sound when the handset goes out of range of the base unit. key, then press or key to select LANGUAGE. key to enter and LCD shows ENGLISH. LANGUAGE 1) Press 2) Press 3) Press or key to select the language from ENGLISH (English), DEUTSCH (German), FRANAIS
(French), ITALIANO (Italian), ESPAOL (Spanish), PORTUGUES (Portuguese), PYCCKN (Russian), TRKE (Turkish), EHNIKA (Greek), YKPAIHCKN (Ukrainian), POLSKI (Polish), MAGYAR
(Hungarian), SVENSKA (Swedish), NEDERLANDS (Dutch), DANSK (Danish) and NORSK (Norwegian). Each language will display in its own native translation. key to confirm . 4) Press HANDSET NAME The function allows the user to change his handset name displaying on LCD,different from other handsets. 1) Press 2) Press 3) Press key and press or key to select HS NAME key and enter the handset name, press R/CLR key to delete wrong input. key to confirm. 9 key and then press or key to select AUTO ANSWER key and press or key to select ON or OFF key to confirm. AUTO ANSWER This function allows the user to answer a call automatically by picking up handset from the charging cradle. 1) Press 2) Press 3) Press BARRING This function allows the user to set to 4 barring numbers to make calls. But the internal calls to intercom or conference will still be available. 1) Press 2) Press 3) Press 4) The LCD shows NUMBER 1, you press or to choose NUMBER i(i=1~4). 5) Press 6) Press For example: NUMBER 1 is set 1234 key and press or key to select BARRING, key and require to enter the PIN code (default:0000). key to confirm, press or key to select ON, press to confirm and input number (Max 4 digits) which you want to block. key to confirm. Repeat the above steps to set the other groups key to confirm. Then you dial the numbers 12345678 to make a call, will be blocked, the LCD displays CALLS BARRED. key to confirm and change the month,date, time. key and press or key to select DATE&TIME key and the last two digits of the year flashes. DATE & TIME This function allows the user to set date and time on the handset, . 1) Press 2) Press 3) Pressing or key to change the year. 4) Press CONTRAST This function allows the user to set the contrast of the LCD. 1) Press 2) Press SELECT BASE This function allows the user to register his handset to more bases(Max 4pcs), such as office and residential. 1) Press 2) Press 3) Press or to select base (BASE 1~4) or AUTO. key and press or key to select CONTRAST. key to confirm, then press or key to select from 1-8 levels. key and press or key to choose SELECT BASE. key and the LCD displays BASE 1 + . The handset is able to register to only such base number with +. to begin searching, if you hear a sound of di-du-di, means it was registered successfully. 4) Press Note: If you select AUTO, the handset will connect to the first of the registered bases that it finds. HANDSET DEFAULT :
This function allows the user to reset the handset setting to the factory default. Calls log,phone book and handset name will be cleared, registered base record will be kept. key and press or key to select HS DEFAULT . key to confirm and the display shows PIN?
1) Press 2) Press 3) Enter the PIN code (default 0000). 4) Press key to confirm. 10 If the PIN code is correct, the handset settings will be reset to the factory default. In the new handset, press In idle mode, enter the number. key to confirm and LCD display SEARCHING X, key on the BASE and hold it until the green LED blinks. key, press or key to select REGISTERATION. key and press or key to select from BASE X +. (X: the number of registered handsets ) key to confirm,and LCD displays PIN?
5: REGISTRATION This function allows the user to register more handsets to his phone base (his handset + anther 4 handsets). New handsets need to be registered first before using. 1) Press 2) 3) Press 4) Press 5) Enter the pin code (default 0000). 6) Press Note:
When hearing DI-DU-DI- sound, that means the new handset has been registered successfully and the LCD displays HS i(i=2,3,4 ,5) When hearing DI-DI-DI- sound, that means the new handset has failed to register and back to idle mode. CALL FUNCTIONS Pre-dialing 1) 2) Press R/CLR key to correct the number. 3) Press 4) Press 5) Caller ID type II During the conversation, the phone will display the new call number when a second call is received. This function will be valid and work after the user apply for call waiting service. Pause Press RD/P key will insert a 3.6 seconds pause time between two digit numbers. Redial function In idle state, Press Flash The flash function of R/CLR key can support some special network service, such as call waiting, call transfer, etc. These services require a subscription and the operations depend on the different exchanger. To Lock/Unlock the keypad To lock the keypad Press and hold the You will hear a beep tone, while the keypad is locked, any key you press is invalid. To unlock the keypad Press and hold the You will hear a beep tone, the handset will be unlocked and it will go back to idle state. MULTI-HANDSET FUNCTIONS key to dial out the number in handset talking mode. key again to enter speaker talking mode. In handset or speaker mode,press or key to adjust its volume. Total 5 levels for selection. key and then press RD/P key, the last dialed number will be dialed again. key for about 2 seconds. key for about 2 seconds. 11 Intercom In idle mode, press INT key. One base supports Max 5 handsets to be registered. If you have two handsets or more registered in one base,you will have below features for working:
1) 2) All the handsets will be ringing, 3) Press Call transfer 1) During conversation, press INT key and the LCD displays HS X ? ( X: HANSET NUMBER) key to enter conversation mode. Press or key to choose other handset if existing.. 2) Press 1 or other handset number. 3) The destination handset will be ringing and ready to answer the call. Three-way conference call 4) HS 1 - user is during conversation, press INT key and the LCD displays HS i ?, Press or key to choose other handset if existing for conference call. key to end the call first, other parties will be still on line conversation . key answer the call key then you can talk all together. 5) Press its handset number (HS i) . 1) HS i will be ringing and ready to answer the call. 2) HS i - User press 3) HS 1 -User press 4) Press TROUBLE SHOOTING No signal bar is displayed on the screen The handset is out of range. Move it closer to the base station No dialing tone Check your phone connections The handset is out of range. Move it closer to the base station No docking tone The handset is not placed properly on the base station/ charger The charging contacts are dirty. Disconnect the power adaptor first and clean the contact with proper damp cloth. The handset on the charger does not charge Make sure the batteries are inserted correctly. Make sure the handset is placed properly on the base station/ charger Batteries are defective. Purchase new ones for replace. No display Make sure the batteries are charged Make sure there is power and the phone is connected The handset no ring Make sure the handset ring tone is turned on. Ring volume too low Check if the ringing volume is set improper, reset it. 12 If batteries are OK, remove the battery, unplug the lines and re-install after 10 minutes. Receive only Check if P/T mode is properly set. Check if you have set the barring number, if you want dial out this number, reset the barring number. The base can not page the handset Repeat the registration operations to register the base and handset again. Most of the functions failed Check if the batteries are strong enough, charge the batteries. Note: Due to continuous product development, all features and specifications are subject to change without prior notice. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. For Handset The device has been tested and comply with FCC SAR limits. For Base This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 13