FCC ID: 2BFH7-Q3161 Car radio

CAR MP5 PLAYER Operating Manual CAR MP5 PLAYER CAR MP5 PLAYER PREFACE:

WARRING In order to prevent injuries and fires, pls pay attention to the following instructions:

In order to prevent short circuit and so on, do not drop the metal objects in the device If there is smoke or peculiar smell the device, pls turn off the power at once Pls do not make the device falling or strong collision, In order to prevent device failure, pls observe the following note:

Pls do not install the device in the place of strong sunlight, high temperature, high humidity or dusty 1. Only connect the unit to a DC 12V power supply with negative grounding 2.Never install the unit where the operation for safety driving is restrained 3.Never use the video display function in the front when driving to prevent the violation of laws regulation and also to reduce the risk of traffic accident except using for rear view video camera 4. Never expose the unit, amplifier, speaker to moisture or water to prevent electronic sparks or fires 5. Pls dont change the fuse in the power cord without professional guidance, improper fuse may cause damage to this using unit or even cause fire Pls replace the fuse which is the same specification. If you are using different specification of the fuse, may cause failure of the device INSTALLATION In order to prevent short circuit, pls pull out the power wire when you replace the fuse In order to be able at any time to deal with road and traffic conditions change, pls lower the volume when driving The unit installs for security, pls install it refer to the following diagram description:

1. Pls make sure the unit in proper place, connect the unit refer to the diagram, and test it works well or not 2.Pls wrapped the connection line with insulation tape to ensure complete wiring after testing well Pls do not get the device wet when washing car, this may cause short circuit, then fire or other failure will be caused 3. Pls bend the hook of metal 1, and insert the metal to instrument panel then fixed it 4. Put the unit into metal hook until it lock CAR MP5 PLAYER CAR MP5 PLAYER General Features Basic Operation Front Panel 7" TFT HD Touch Screen BT/FM/TF/USB Mp5 rearview Camera 13 14 15 16 17 18 7 inch digital TFT Touch Screen With TF card Slot, with USB 2.0 port 1080P Video Format Support the Audio playback format of MP3/WMA/WAV/FLAC/OGG/APE Support the Video playback format of RM/RMVB/DVD(VOB)/VCD(DAT)/MP1/MP2/DIVX/XVID/MP4/

H263/H264/FLV/3GP/SWF/AVI/ASF/MJPEG etc Maximum amplifier:45 watts X 4 FM range: 87.5 MHz~108.00 MHz(Europe) With Remote control Power-offf with auto-memory store function under radio or TF/USB mode Clock Function Mute Function BT Function Bass& Treble, L&R channel stabillizer Aux In Function Rearview Camera Function Video input Function 1 2 3 4 5 6 7 8 9 10 11 12 1. Power :Press long time to turn on/off press short time to enter into switch mode 2.Homepage 10.Press into SD card play 11. Press into Radio 3.Volume+

4.Volume-

5.Reset 6.TF card slot 7. USB slot 8.MIC 9.Press into USB play 12. Press into Bluetooth connecting 13.Homepage 14. Volume+/-

15. Time 16.Date / Time setting 17.Bright:press into Bright mode 18.Back CAR MP5 PLAYER HOME MUSIC CAR MP5 PLAYER Touch the middle region source button to enter desired source Slide middle source region left or right can switch to Home Page-1 or Page-2 BT Bluetooth connecting indicatior RADIO Enter Radio menu USB Enter USB play Card Enter SD play RADIO MOVIE AS ENTER AM1/2 ENTER Auto searching and store the stations to preset Searching-up station Band Band Switch(FM1/2/3, AM 1/2) Searching-down station DX/LOC Local Stations PS ENTER FM 1/2/3 Previous Song Repeat the Song Play/Pause Next Song AutoPlay Play List Rewind Play/Pause Fast Forward Sound mode Zoom 4:3 Back CAR MP5 PLAYER PHOTO Last photo Play/Pause Next photo Auto play Zoom in Zoom out Back BLUETOOTH CAR MP5 PLAYER Previous Song Repeat the Song To switch Dail, Call history, phone book, Play/Pause bluetooth audio play Next Song Dial button SETTING BLUETOOTH General Enter into general setting Time Enter into date and time setting Language Enter into language setting Wallpaper Enter into wallpaper setting Audio Enter into audio setting Bluetooth Audio Play Previous Song Play/Pause Next Song CAR MP5 PLAYER CARPLAY For Android system phone link:

1.Connect your phone to the unit with a USB cable 2. Open the Development and USB debugging in your phone 3.Downloaded the Baidu Carlife in your phone 4.Open the voice broadcast in your phone 5.Say what your want to the unit Remark: Android only for Chinese For Iphone link:

1.Connect your phone to the unit with a USB cable 2.Open your Siri Voice in your phone 3. Say Hi Siri, what you want to do CarPlay available on model from these great marques:

CAR MP5 PLAYER BLUETOOTH CARPLAY phoebook Call the contact Downloaded the contact list CarPlay is a smarter, safer way to use our iPhone in the car, CarPlay takes the things you want to do with your iPhone while driving and puts them right on your cars built-in display. You can get directions, make calls, and received message and listen to music, all in way that allows you to stay focused on the road just lug in your iPhone and go CarPlay is compatible with these iPhone models:

iPhone Xs iPhone 7 iPhone SE iPhone Xs Max iPhone 7 Plus iPhone 5s iPhone Xr iPhone 6s iPhone 5c iPhone X iPhone 6s Plus iPhone 5 iPhone 8 iPhone 6 iPhone 8 Plus iPhone 6 Plus CAR MP5 PLAYER REMOTE CONTROL DESCRIPTION CAR MP5 PLAYER WIRE DIAGRAM 19 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1.Power switch 2.Right 3.Mode switch 4.Last song 5. USB/SD 6.Volume+

7.Band/Automatic/Station search 8.Digital key 9.Up 10.Menu 11. Left 12.Confirm/Play/Pause 13.Down 14.Next song 15.Choice 16.Voume-

17.Answer the phone 18.Hang up 19.Mute B A 1 3 5 2 4 6 1 3 5 2 4 6 7 8 e s u F A 0 8 1 7 A-OUT-L V-OUT1 V-IN AV-IN A-OUT-R V-OUT2 CAM-IN ANT A1: Parking Sensor Control Wires+12V B1: Right Rear Speaker+

A2: Parking single check B2: Right Rear Speaker-

A3: KEY B3: Right Front Speaker+

A4: B+ B4: Right Front Speaker-

A5: Power Antenna/Amplifier Turn On B5: Left Front Speaker+

A6: Head Lamp B6:Left Front Speaker-

A7: ACC B7: Left Rear Speaker+

A8: GND B8: Left Rear Speaker-

Pls check the speaker line carefully before installation if any grounding or touching, Pls Connection again or the unit will be burned SPECIFICATION SNR......................................................................................... 65dB Frequency response................................................................. 20Hz-20KHz Loudspeaker impendence......................................................... 4-8 The maximum output power.................................................... 4X4.5W Tone Control .........................................................................Bass+/-7dB(100Hz) FM Frequency........................................87.5MHz~108MHz Sensitivity........................................ 26dB Selectivity........................................ 60dB Separation......................................... 35dB FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s).

Date2024-03-29 Shenzhen Cheyang Technology Co.,Ltd. Product Model Number:Q3161 Q3161, CY-1001, A2769, K0129, K0126, A2065, A3018, N2042, A3012, A3019, A3013, A3107, A2319, A2798, A3061, A2795, A2181, A2222, Q3570, A2905, W5087, A3073, A3521, A3327 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:

Testing Approval applications and procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by ORGANIZATION. on our behalf shall have the same effect as acts of our own. By:

Contact Listed on FCC Wesbite Title: Manager Email: cy0052@cheyang.net Telephone: +8618898453518 On behalf of: Shenzhen Cheyang Technology Co.,Ltd.

Shenzhen Cheyang Technology Co.,Ltd. Address369 Bulong Road,Ma'antang Community, Bantian Street, Longgang District, Shenzhen, Guangdong,China Date: 2024-04-01 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing SUBJECT: FCC Application for FCC ID: 2BFH7-Q3161 FRN: 0035145093

(Shenzhen Cheyang Technology Co.,Ltd.) certifies that, as of the date of the filing of the application, GSS SERVICE INC is our designated U.S. agent for service of process for the above referenced FCC ID. (Shenzhen Cheyang Technology Co.,Ltd.) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. GSS SERVICE INC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information:

Name: GSS SERVICE INC Address: 6547 N Academy Blvd #2266 Colorado Springs COLORADO 80918 United States FRN 0033402082 Contact Person:Michoux Logan Tel.:001-949-2990192 Email: michouxlogan@outlook.com Sincerely, Signed on behalf of Shenzhen Cheyang Technology Co.,Ltd. Signed on behalf of GSS SERVICE INC Name:Hengbin Tian Name: Michoux Logan Title:Manager Date: 2024-04-01 Title:Manager Date: 2024-04-01

ANTENNA SPECIFICATION 2400MHz 0 DB ANT SPEC 2.4G ANT PCB antenna 2450MHz

-0.01 DB 0 DB Horizontal and Vertical 50Ohm 2500MHz

-1.6 DB Summary ITEM Model Name Antenna plate Center Frequency MAX. Gain Polarization Impedance Manufacture AntennaPhoto&Length(mm) Shenzhen Cheyang Technology Co.,Ltd. Address: 369 Bulong Road,Ma'antang Community, Bantian Street, Longgang District, Shenzhen

(Shenzhen Cheyang Technology Co.,Ltd.) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Mar. 29, 2024 FCC ID: 2BFH7-Q3161 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing

(Shenzhen Cheyang Technology Co.,Ltd.) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing

(Shenzhen Cheyang Technology Co.,Ltd.) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Applicant:Shenzhen Cheyang Technology Co.,Ltd. Address: 369 Bulong Road,Ma'antang Community, Bantian Street, Longgang District, Shenzhen, Guangdong,China Contact Person: Hengbin Tian Tel.: +8618898453518 Email: cy0052@cheyang.net Sincerely, Signature:

Shenzhen Cheyang Technology Co.,Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID:2BFH7-Q3161 Date: March 29, 2024 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name:Hengbin Tian Title:Manager

Shenzhen Cheyang Technology Co.,Ltd. Model Difference Product description: Car radio Model name: Q3161 Q3161, CY-1001, A2769, K0129, K0126, A2065, A3018, N2042, A3012, A3019, A3013, A3107, A2319, A2798, A3061, A2795, A2181, A2222, Q3570, A2905, W5087, A3073, A3521, A3327 FCC ID: 2BFH7-Q3161 Q3161 is the test model, other models are derived models. Only the model name and appearance differ in shape and color, the circuit principle, key components and internal structure are the same. Therefore, the test data of Q3161 can be representative of other models. Clients signature:

Clients name / title : Hengbin Tian / Manager Contact information / address:Room 1113, Building 3, Futong Haizhi Technology Park, Bulan Road. Nanwan Street, Longgang District Shenzheng