Stealth Wireless Charger User Manual This product is designed for charging mobile phones through a surface of 15-30mm thickness. It is compatible with all Qi standard mobile phones. It can charge through any non-metal surface, such as wood, plastic, glass, and granite, etc. and support fast charging. Packing List 1. Wireless charger 1 2. U-shaped tray1 3. Power adapter1 4. Desktop sticker1 5. Movable magnet1 6. U-shaped cardboard with fixed magnet1 7. Cable clips3 8. Screws2 9. Manual & warranty card1 Installation Instructions Accessory Descriptions Installation Steps 1. Align the center of the desktop sticker with the center of the U-shaped cardboard by using the two magnets. 2. Tear off the paper on the surface of the U-shaped cardboard. Align and stick the U-shaped tray to the lower surface of the desk. 3 Remove the U-shaped cardboard and insert the wireless charger into the U-shaped tray.
(Screws are optional.) 4 Switch on power and place the mobile phone on the top of the desktop sticker to start wireless charging. (Cable clips are optional.) Frame MaterialABS+PC Input Voltage/Current19V/0.94A System Parameters 1. ModelQB01 Wireless Charger 2. Dimension154mm110mm10mm 3. Net Weight0.167kg 4. ColorBlack 5. 6. 7. Output Power10WMax 8. Valid Charging Distance15mm-30mm 9. Horizontal Tolerance15mm 10. Protection: FOD, OTP, OVP 11. Charging Mode: Compatible with Qi-BPP, iPhone and Samsung fast charging 12. Product Certification: CNAS/CE/FCC/ROHS Tips 1 The charger will stop automatically when a metal or other foreign object is in the charging area. Remove the object to continue charging. 2 If charging is stopped with unknown reason, just move the mobile phone away and then place it back in the charging area. 3 LED indicator instructions:
Blue light breathing Blue light always on Standby Working Red light twinkle Foreign object is detected or phone is too close to the charger./Remove the foreign object or keep mobile phone in the right range. Notes 1 Please install according to the instructions to ensure the proper operation of the charger. 2 Please do not install on the metal desk. 3 Do not place any metal objects, including ID card, bank card, bus pass and other digital IC cards, in the charging area. 4 To avoid damage, please do not place the device in a wet, hot or cold environment. 5 Please do not place the device directly under the sunlight or close to any heating equipment such as microwave oven, roaster and water heater. 6 Do not disassemble the device or place it in any liquid to avoid damage and/or electrification. 7 Do not toss, press or puncture the device. High external pressure will cause damage to the device. 8 Please keep the charging area clean for best charging efficiency. 9 The devices electromagnetic effect might interfere with some implanted medical devices, such as pacemaker, cochlear implant and hearing-aid. Please consult the manufactures if you use such implants. 10 Please follow the local recycling guidelines when discarding this product. 11 Please keep the device and accessories out of the reach of children. 12 For best performance, please use the accompanied power adapter. Service and Warranty 1 The warranty is governed by the laws of the country in which the product is purchased. 2 This product is warranted for one year from the date of purchase. Failure to provide proof of purchase may void the warranty. 3 During the warranty period, free service will be provided in case of product malfunction. 4 Warranty does not apply to the following cases:
a) Damage caused by the user;
b) Beyond the warranty period;
c) Without warranty card or valid invoice or other proof of purchase;
d) Product model is inconsistent with the warranty card or the warranty card is modified. e) Damage due to mishandling during product usage or maintenance. f) Damage caused by disassembling or breaking the product, or soaking the product in liquid. g) Damage caused by events of force majeure. Manufacturer: Shenzhen Yaoyuan Tech Co., Ltd. Add: No 908,Building D, Galaxy World 2th, Wuhe Ave, Longgang District, Shenzhen, Guangdong, China 518116 Tel: +86-755-84658719 Emailsales@magcharging.com Websitewww.magcharging.com WARNING: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. FCC RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Warranty Card Dear Customer, Thanks for purchasing our product of Magcharging. Please fill in and keep this warranty card to ensure our best service. Company Name Purchase Date Product Address Order Number Maintenance Record Customer Name Telephone Model Date Malfunction condition and repair record Notes:
1 Please send your product together with the warranty card to our company if needed. 2 The warranty is governed by the laws of the country in which the product is purchased. This product is warranted for one year from the date of purchase. Failure to provide proof of purchase may void the warranty. 3 Warranty does not apply to damage caused by the user; beyond the warranty period;
without warranty card or valid invoice or other proof of purchase; product model is inconsistent with the warranty card or the warranty card is modified; damage due to mishandling during product usage or maintenance; damage caused by disassembling or breaking the product, or soaking the product in liquid; damage caused by events of force majeure. Manufacturer: Shenzhen Yaoyuan Tech Co., Ltd. Add: No 908,Building D, Galaxy World 2th, Wuhe Ave, Longgang District, Shenzhen, Guangdong, China 518116 Tel: +86-755-84658719 Emailsales@magcharging.com Websitewww.magcharging.com