FCC ID: 2ATUKBN-403 GPS TRACKER

1 GPS Tracker User Manual Preface Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release. The manufacturer assumes no responsibility for any errors or omissions in this document. 4 5 2 Contents 1 SUMMARY

................................................................................................................................................... 5 2 APPLICATIONS

.......................................................................................................................................... 5 3 HARDWARE DESCRIPTION

.................................................................................................................... 5 SPECIFICATIONS

...................................................................................................................................... 6 START TO USE

............................................................................................................................................ 6 5.6 MOBILE APP 5.1 5.2 5.3 5.4 5.5 TURN ON THE DEVICE DEVICE STATUS LIGHT SIM CARD INSTALLATION TERMINAL INSTALLATION GPRS CONFIGURATION FOR LIVE REAL-TIME TRACKING 5.5.1 Configure APN setting 5.5.2 Configure user name and password of GPRS

......................................................................... 8

.................................................................................... 9

....................................................................................................................... 8

....................................................................................................................... 6

....................................................................................................................... 7

............................................................................................................................. 8

.............................................................................................................................. 8

........................................................................................................................................... 9

............................................................................................................................................ 10

....................................................................................................................................... 11

............................................................................................................................................ 11

............................................................................................................................................. 12

......................................................................................................................... 13

........................................................................................................ 14

............................................................................................................................................ 14

................................................................................................................................................ 16

........................................................................................................................................ 16

.................................................................................................. 9 5.6.1 Scan the QR code to download APP 5.6.2 Register 5.6.3 Bind device 5.6.4 Position 5.6.5 Control 5.6.6 Device management 5.7.1 Register 5.7.2 Login 5.7.3 Add device BAANOOL IOTS WEB VERSION 5.7 6 FUNCTION DETAILS

.............................................................................................................................. 17 6.1 6.2 6.3 6.4 SINGLE TRACKING CHANGING PASSWORD CONTINUOUS INTERVAL TRACKING AUTHORIZATION 6.2.1 Authorizing:

6.2.2 Deleting authorized number

.......................................................................................................................... 17

................................................................................................................................... 18

..................................................................................................................................... 18

............................................................................................................ 18

................................................................................................................................. 18

....................................................................................................... 19

......................................................................................... 19

...................................................................................... 19

............................................................................... 20

........................................................................... 20

.................................................................................................................. 20

...................................................................................................................... 20

....................................................................................................................... 21 6.4.1 Limited times tracking at a time interval 6.4.2 Unlimited times tracking at a time interval 6.4.3 Unlimited times tracking at a distance interval 6.4.4 Smart tracking at both time and distance interval 6.4.5 Cancel interval tracking SMART ANGLE UPDATING GPS DRIFT SUPPRESSION 6.5 6.6 3 6.17 REMOTE CONTROL FUNCTION (FOR B MODEL) 6.18 ARMING Low battery alarm SOS alarm Blind area alarm 6.16.1 6.16.2 6.16.3 6.16.4 6.16.5 6.16.6 Movement alarm 6.16.7 6.16.8 Fuel alarm Geo-fence Over speed alarm LOCATION BASED SERVICE (LBS) / CELL-ID TRACKING FORWARDING INCOMING SMS MESSAGES AUTO ANSWER EXACT STREET ADDRESS SIM CARD BALANCE ENQUIRY 6.7 6.8 6.9 6.10 6.11 6.12 ACC ON/OFF ALERT 6.13 REMOTE IMMOBILIZING 6.14 FUEL SENSOR CALIBRATING 6.15 CONFIGURE TIMES OF ALARM SMS 6.16 ALARMS Arming by SMS Power disconnection alarm Arming with remote control (For B model)

....................................................................................................................... 21

........................................................................ 21

...................................................................................................................................... 22

............................................................................................. 22

............................................................................................................. 22

........................................................................................................................... 23

........................................................................................................................ 23

.................................................................................................................. 24

....................................................................................................... 25

................................................................................................................................................ 25

........................................................................................................................ 25

......................................................................................................... 25

.......................................................................................................................... 26

.................................................................................................................................... 26

..................................................................................................................................... 26

.......................................................................................................................... 27

......................................................................................................................... 27

................................................................................................................................... 28

...................................................................................... 28

................................................................................................................................................ 28

............................................................................................................................ 28

................................................................................. 29

.................................................................................................................................... 29

................................................................................................................... 29

........................................................................ 29

........................................................................................................................................... 29

....................................................................................................................... 29

............................................................................ 30

..................................................................................................... 30

.................................................................................................................... 30

.................................................................................................... 30

.......................................................................................................... 30

............................................................................................................... 31

.................................................................................................................................................... 31

................................................................................................................................... 31

.............................................................................................................................. 32

...................................................................................................................................... 32

......................................................................................................................................... 32

............................................................................................................................ 32

................................................................................................................................ 33

....................................................................... 33

............................................................... 33

................................................................................................ 34

............................................................................................................ 34 Configure APN, GPRS login user name and password Silent arming with remote control (For B model) Disarming with remote control (For B model) Configure domain name and port ACC (Ignition / voltage) alarm Acceleration Sensor Alarm GPRS / SMS mode switch No GSM network alarm Silent arming by SMS Door opening alarm Disarming by SMS No sleep mode Sleep mode 6.23 CHECK STATUS 6.24 CHECK IMEI 6.25 LOCAL TIME SETTING 6.26 RESET HARDWARE 6.27 GPRS CONFIGURATION FOR LIVE REAL-TIME TRACKING 6.18.1 6.18.2 6.19.1 6.19.2 6.20.1 6.20.2 6.21.1 6.21.2 6.21.3 6.21.4 6.22.1 6.22.2 6.27.1 6.27.2 6.27.3 6.19 SILENT ARMING 6.20 DISARMING 6.21 ALARM FUNCTION IN ARMING STATE 6.22 SLEEP 4 6.28 ACTIVATE FUEL VALUE IN GPRS DATA 6.29 CONFIGURE SMS MANAGEMENT CENTER NUMBER 6.30 CONFIGURE HEARTBEAT PACKAGE INTERVAL 6.31

.................................................................................................. 35

............................................................................... 36

........................................................................................ 36

..................................................................................................................................... 36 INITIALIZATION 7 CAUTIONS

................................................................................................................................................. 37 8 TROUBLESHOOTING

............................................................................................................................. 37 5 1 Summary This product is based on the GSM / GPRS network and GPS satellite positioning system. It integrates anti-theft alarm, positioning, first aid and tracking functions in a brand new product which can locate and manage remote targets through SMS text messages, mobile app and web platform. Features Built-in GSM, GPS antenna, small size, beautiful and elegant. Support GPS and LBS (Location based service) dual tracking solutions. Support transferring the position data through SMS, GPRS and internet Support remote configurations Support to update the firmware over-the-air (OTA) 2 Applications Mainly used in the positioning and tracking services of vehicles and other moving objects. 3 Hardware Description SIM Card GPS/POWER/GSM status light 6 4 Specifications Product name Model DIM. Weight Network Band LTE wireless data terminal 403 9.65.31.8cm 70g GSM/GPRS/LTE 4G (B1/B2/B3/B4/B5/B7/B8/B20/B28) 2G (1900/1800/900/850 MHz) GPS sensitivity GPS accuracy

-165dBm 5m Cold status 45s Warm status 35s Hot status 1s 12V-24V Chargeable changeable 3.7V 350mAh Li-ion battery

-40C to +85C

-20C to +55C 5%--95% non-condensing Time To First Fix Applicable car power Battery Storage Temp. Operation Temp. Humidity 5 Start to use 5.1 Terminal installation Please ask a qualified engineer to install it. The installation environment should not exceed the GSM performance index. Please do not install it in a dusty and humid environment. Find the 12PIN wiring harness provided with the product, insert it into the corresponding wiring hole of the product, and connect to the original car circuit as shown in the following figure:

7 Wiring Diagram The pink wire can be connected to the original car alarm horn or the alarm horn purchased together. Understand that the vehicle door trigger type is positive trigger or negative trigger. Connected to the green wire if it is positive trigger, and connected to the blue wire if it is negative trigger. Please install the SOS button where the driver can touch it. 5.2 SIM card installation Open the rubber plug of the SIM card slot and insert SIM card. Please make sure the SIM card is of GSM network, and you have topped it up with credit. Make sure that there is no call transfer and call display is on, the PIN code is locked. The format of the SMS message must be text format because device cannot recognize the PDU format. Note: The tracker will only accept a Nano size SIM card standard or Micro SIM cards will not work in the tracker. 8 5.3 Turn on the device Connect the positive and negative (red and black) wires of the power supply to the 12V or 24V power supply of the car. Wait the device works normally After 1 minute of power-on. 5.4 Device status light Red light: Always on when charging, and turns off after being fully charged. Red light flashes quickly when battery is low. Green light: Flashes every 1 second when GSM network signal normally, flashes every 3 seconds when works in GPRS mode; always on when no GSM network. Blue light: Flashes every 1 second when GPS signal is normal; flashes 3 times per second when GPS signal is very good (at least 4 satellites with a signal-to-noise ratio of more than 38), and turns off if lost fix to satellites. Attention:

When reading this user manual, you will notice that we have used "+" and "space"

between some words;"+" between two words means they should be written together as one word without a space and "space" between two words means you should leave one character space between two words. 5.5 GPRS configuration for live real-time tracking Usually, the device can automatically recognize and select the APN, user name and password of GPRS settings. If the device cannot connect to the web platform, then you need to use the mobile phone text message to configure the settings according to following steps. 5.5.1 Configure APN setting APN is an abbreviation for Access Point Name and changes depending on which mobile network you are using. For more information about your local APN, please check with your local wireless carrier. SMS command: APN+password+space+local APN Tracker response: APN OK 9 Example: APN123456 CMNET Note: 123456 is the default password, please change password on APP or refers to 6.1. CMNET is the APN of China mobile. 5.5.2 Configure user name and password of GPRS In the most countries, the user name and password of GPRS are not necessary;

therefore, you can ignore this step if it is not necessary for your local network. For those countries requiring user name and password, please configure as following:

SMS command: up+password+space+user+space+password Tracker response: user, password ok!

Example: up123456 Jonnes 666666 Note: 123456 means the password of the device, Jonnes means the user name of gprs, and 666666 means password of gprs, please configure it according to the user name and password of your local ones, you can check this information with your local wireless carrier. 5.6 Mobile APP 5.6.1 Scan the QR code to download APP Google PlayApp Store search BAANOOL IoT to download it. 10 5.6.2 Register 5.6.2.1 Open BAANOOL IoT, register a new account and login. Input phone number Input correct country code, otherwise, no way to get verification code Input the calculation result. Click to get the code Input your new password twice and click register to finish registration 11 5.6.2.2 Choose BAANOOL IoV to enter it. 5.6.3 Bind device Click Me Device Management Add, scan the QR CODE on the device or enter the IMEI manually to bind the device. Scan QR CODE or enter the IMEI number Click to add the device 5.6.4 Position 1. Check the device: Click Position to enter the position page to see all the 12 devices on the map, click the icon of the device to see the details including latitude & longtitude, speed, altitude, time, ACC status, door status, and alarm status, etc. and you can click Navigate to navigate you to that car. 2. Select the device: Click at the upper left corner to select a device, Then its position, Geo-fence and trace (need to configure the continuously track settings of the Control page) will be showed on the map. Select the device 5.6.5 Control After selected the device, then click Control to enter control page to use function of single track, continuously track, Arm / Disarm and Geo-fence, etc. Select a device 13 Select a device Geo fence Click to check the Geo-fence Create a new Geo-fence 5.6.6 Device management After selected the device, click Me to management page to add device, change devices information, delete settings, group management and sub-account management. 14 5.7 BAANOOL IOTs Web Version Account name and password are the same on mobile App and web version 5.7.1 Register Open http://www.baanool.net to register a new account. 15 Click to register Enter IMEI, account, password, mobile phone No. (For forget password purpose) to finish the registration. 16 5.7.2 Login Enter your account and password to login 5.7.3 Add device Device management Add device 17 Enter IMEI Device name Choose an icon for device Click to save it This device you just added is still offline If the device is always offline (Grey color), please make sure the SIM card subscribes the GPRS service, and have credit to surf the Internet, you can put the SIM card in the phone to test if it can surf the Internet. Besides, please also check if the configurations of APN, user name &

password are correct, refers to section 6.27 for more information. 6 Function details The configuration of following functions can be done on the App or web platform. 6.1 Changing password SMS command: password+old password+space+new password Tracker response: password OK Example: password123456 888888 Be sure to keep the new password in mind, you have to flash the firmware to restore the initialized setting in case of losing the new password. Attention: Make sure the new password is in 6 digits Arabic numbers, otherwise 18 the tracker cannot recognize it. When reading this user manual, you will notice that we have used "+" and "space"

between some words;"+" between two words means they should be written together as one word and "space" between two words means you should leave one character space between two words. 6.2 Authorization The authorized numbers are used to receive the various alerts, such as SOS, Geo-fence and movement alert, etc. Up to 5 numbers can be authorized. If you call the tracker 10 times in succession, the number will be authorized automatically as the first number and tracker response add master ok. Alternatively, you can authorize your number in the following way:

6.2.1 Authorizing:

SMS command: admin+password+space+mobile phone number Tracker response: admin ok Example: admin123456 13322221111 6.2.2 Deleting authorized number SMS command: noadmin+password+space+authorized number Tracker response: noadmin ok Example: noadmin123456 13322221111 If you want to receive these kinds of notification alerts when the trackers moved to another country, you must put the country code before the phone number to authorize it in international format, If there is a 0 before your phone number, please remove the 0, for example, admin123456 008613322221111. 6.3 Single tracking If there arent any authorized numbers set-up, it will reply all calls with a location report; if there are authorized numbers set-up, then it will not respond when an unauthorized number calls it. If you call it from authorized phone number, it will hang up and report a real-time location as below:

19 When it lost fix to satellites, the message will include the last known GPS position and a LAC code of the updated position as well. 6.4 Continuous interval tracking 6.4.1 Limited times tracking at a time interval SMS command: fix030s600s005n+password Tracker response: It will update positions at 30 seconds interval when ACC ON and 600 seconds when ACC OFF for 5 times. Example: fix030s600s005n123456 Note:

The numbers in the command must be 3 digits and maximum times allowed are 255 times. The interval unit in all fix command can be s (seconds), m (minutes) and h

(hours) 6.4.2 Unlimited times tracking at a time interval SMS command: fix030s600s***n+password Tracker response: It will update positions at 30 seconds interval when ACC ON and 600 seconds when ACC OFF continuously. Example: fix030s600s***n123456 Note: The time interval must be more than 10 seconds. 20 6.4.3 Unlimited times tracking at a distance interval SMS command: Distance+password+space+distance value Tracker response: Distance ok Example: Distance123456 0050 Note: The distance unit is meter, and value must be 4 digits. 6.4.4 Smart tracking at both time and distance interval SMS command: fix030s600s***n+password+space+distance value Tracker response: It will update a position at 600 seconds interval when motionless, and update a position at 30 seconds when moving, besides, it will also update a position when move 200 meters away. Example: fix030s600s***n123456 0200 6.4.5 Cancel interval tracking SMS command: nofix+password Tracker response: nofix ok Example: nofix123456 6.5 Smart angle updating It will update positions automatically to web platform when the vehicle changes driving direction over a pre set angle value to make its trace following the actual road and seem better on the map. This function is only available in GPRS mode. SMS command: angle+password+space+angle value Tracker response: angle ok Example: angle123456 030 Note: The angle value must be 3 digits, and the default value is 30 degree. 21 6.6 GPS drift suppression This function is activated by default. SMS command to activate: suppress+password Tracker response: suppress drift ok Example: suppress123456 If you stop driving the vehicle, tracker will stop updating its position and keep sending the same latitude and longitude, and when start to driving, the latitude and longitude will update automatically again. SMS command to deactivate: nosuppress+password Tracker response: nosuppress ok Example: nosuppress123456 6.7 Exact street address You must set the APN of your local GSM network provider for the SIM card in the tracker before using this function, if your local GSM network provider requires user name and password for GPRS, Please set it up according to the section 6.27. After APN has been set up, send "address+password" , it will reply in exact address including street name. For example: No.113, Guankou 2nd Rd, Nantou, Nanshan district, Shenzhen, Guangdong, china. 6.8 Location based service (LBS) / Cell-ID tracking If the tracker cannot establish a solid GPS Fix, it will calculate its location using Cell-ID GSM locating, Location reports will include the GPS coordinates of the last known positions as well as a LAC code, You can send command address+password to the tracker to request exact address in SMS mode, tracker will automatically switch to tracking by LBS in GPRS mode. Accuracy of LBS depends on the distance to the nearest GSM Network Cell Tower or Base Station. Note: This feature can be used normally in most areas according to the signal of GSM network. It may not be available in some areas. 22 6.9 Auto answer Track is the default mode for position. SMS command to switch to auto answer mode: autoans +password Tracker response: autoans ok!

Example: autoans123456 Note: If there arent any authorized numbers set-up, it will auto answer for all the incoming calls, if there are authorized numbers set-up, it will auto answer the incoming calls from authorized numbers and reject all other phone numbers. SMS command to switch back to track mode: tracker+password Tracker response: tracker ok Example: tracker123456 6.10 Forwarding incoming SMS messages SMS command: forward+password+space+third party phone number Tracker response: forward ok Example: forward123456 10086 The carriers number which used to sending notification messages is recommended to set up, tracker will forward the notification message to authorized numbers when carrier send message to remind you to top up your SIM card. SMS command to cancel: noforward+password Tracker response: no forward ok Example: nofoward123456 6.11 SIM Card Balance Enquiry SMS command: balance+password+space+phone number+space+code Tracker response: It will forward the code to the specified phone number and return the content from that number. Example: balance123456 10086 ye This function assumes that your GSM network provider has the option where you can check your SIM cards balance by sending a SMS message to a specified 23 number, which is 10086 in this example of China Mobile. Mobile balance123456 10086 ye Tracker 10086(China mobile) Received and execute Send ye out to 10086 Forward balance message to mobile phone Received Balance message Received ye from number in the Send balance back tracker and process 6.12 ACC ON/OFF Alert This function is OFF by default. SMS command to activate: ACC+password Tracker Response: ACC ok Example: ACC123456 If tracker detect ignition on signal from ACC wire (white wire), tracker will send ACC on+latitude & longitude to authorize number to tell you the vehicle has been started. When detect ignition off signal, it will send ACC off+

latitude & longitude to tell you the vehicle has been stopped. SMS command to deactivate: noACC+password Tracker response: noACC ok Example: noACC123456 It can only activate or deactivate the notification by SMS message to authorized phone numbers, the notification to web platform cannot be deactivated and will always send automatically. 6.13 Remote immobilizing Immobilizing way set up Immediate execution way: Tracker will immobilize the vehicle immediately SMS command: quickstop+password Tracker response: quickstop OK Example: quickstop123456 Delay execution way (Default setting): When receiving STOP command, tracker will check speed and reply it will be executed after speed less than 20KM/H if speed is higher than 20KM/H, and delay executing this command until the speed is less than 24 20KM/H. SMS command: noquickstop+password Tracker response: noquickstop OK Example: noquickstop123456 Remote immobilizing SMS command: stop+password Tracker response: Stop engine succeed Example: stop123456 Once the immobilize function has been executed, it will remain immobile until you send command to resume the fuel supply Remote fuel resume SMS command: resume+password Tracker response: Resume engine Succeed Example: resume123456 This means tracker will now resume the fuel & power supply. 6.14 Fuel sensor calibrating For reasons such as different fuel tank heights and specifications, tracker needs to set the proper height to zero and full values in order to read the correct percentage value. Calibrate 0% when the fuel tank is empty:

SMS command: oilzero+password Tracker response: oilzero ok!

Example: oilzero123456 Calibrate 100% after fill the fuel tank 100%:

SMS command: oilfull+password Tracker response: oilfull ok!

Example: oilfull123456 You can connect the original car's voltage type fuel sensor, the applicable range is 0 ~ 5V. If the original one cannot be used, then an external voltage type fuel sensor is the solution. 25 6.15 Configure times of alarm SMS The times of the message of a continuous alarm can be configured. 3 times messages by default. SMS command: xtime+password+times value Tracker response: xtime ok!

Example: xtime123456 005 (It means to send messages 5 times.) Note: The times value must be 3 digits. 6.16 Alarms 6.16.1 Low battery alarm This feature is activated by default, when the battery is low, tracker will send message low battery + latitude & longitude to authorized numbers for 2 times at 15 minutes interval. Note: The times of this alert cannot be configured by the xtime command. SMS command to deactivate: lowbattery+password+space+off Tracker response: lowbattery off ok Example: lowbattery123456 off SMS command to activate: lowbattery+password+space+on Tracker response: lowbattery on ok Example: lowbattery123456 on 6.16.2 Power disconnection alarm This feature activate by default. Tracker will send Power alarm+latitude &

longitude to authorized numbers every 3 minutes when external power disconnected SMS command to deactivate: extpower +password+space+off Tracker response: extpower off ok Example: expower123456 off SMS command to activate: extpower +password+space+on Tracker response: extpower on ok Example: expower123456 on 26 6.16.3 Blind area alarm This feature is deactivated by default, tracker will send SMS notification No gps+latitude & longtitude of the last know position. to authorized numbers if lost fix to GPS satellites. SMS command to activate: gpssignal +password+space+on Tracker response: gpssignal on ok Example: gpssignal123456 on SMS command to deactivate: gpssignal +password+space+off Tracker response: gpssignal off ok Example: gpssignal123456 off 6.16.4 SOS alarm Press SOS button for 3 seconds (For model B, press key on the remote control), tracker will send SMS notification Help me+latitude & longtitude, to all the authorized numbers at 3 minutes interval. SMS command to disable the notification: help me Tracker response: help ok Example: help me 6.16.5 Geo-fence The Geo-fence feature creates a virtual fence. When the tracker moves out of this virtual fence, SMS notification stockade!+latitude & longtitude will be sent to the authorized numbers. SMS command to activate: stockade+password+space+latitude, longitude;

latitude, longtitude Tracker response: stockade ok!

Example: stockade123456 22.554459, 113.903981; 22.553002, 113.909378 SMS command to deactivate: nostockade+password Example: nostockade123456 27 Note: The first latitude & longitude is coordinate of the top left corner of the Geo-fence, and the second latitude & longitude is the coordinate of the bottom right corner. To configure the Geo-fence the tracker must fix to satellites and be stationery for about 3-10 minutes. 6.16.6 Movement alarm The movement feature will create a circle area with a set radius (200 meters by default). When the tracker moves out of this area, SMS notification move!+latitude & longtitude will be sent to the authorized numbers. SMS command to activate: move+password+space+radius value Tracker response: move ok!

Example: move123456 0200 SMS command to deactivate: nomove+password Tracker response: nomove ok Example: nomove123456 Note: The unit of the radius value is meter, and the value must be 4 digits and maximum 9999 meters. To configure the movement alarm, the tracker must fix to satellites and be stationery for about 3-10 minutes. 6.16.7 Over speed alarm The tracker can be configured to send an alert speed+xxx!+latitude & longitude to authorized numbers when a certain speed in exceeded. In SMS mode, tracker only sends one alert in 3 minutes, and siren beep for one second for each trigger. SMS command to activate: speed+password+space+speed value Tracker response: speed ok!

Example: speed123456 080 SMS command to deactivate: nospeed+password Tracker response: nospeed ok Example: nospeed123456 Note: The recommended speed should not be less than 30km/h. If the speed is set lower than this you may get a false alarm due to GPS inaccuracy. 28 6.16.8 Fuel alarm When the vehicle's fuel consumption exceeds the normal standard while the vehicle is running, or there is fuel leakage or fuel stealing when the vehicle is stopped, tracker will send "oil: %+latitude & longitude" to the authorized numbers every 3 minutes. The siren will beep for 20 seconds. SMS command to stop the notification: nooil+password Example: nooil123456 6.17 Remote control function (For B model) Key Function Arming Disarming Descriptions Press for 0.5 second, the siren will beep one time. Press for 0.5 second, the siren will beep two times. Press for 0.5 second when it is in disarm state, the siren will beep one time. In silent mode, the siren will not sound even if an alarm is triggered. DISARM will quit from silent mode. Press for 3 seconds, Tracker will send SOS alert to authorized phone numbers. Siren wont sound. Press for 0.5 second when it is in arm state, siren will beep 10 seconds, press disarm key to stop. Silent arming SOS Deterrence/

Car locate 6.18 Arming 6.18.1 Arming by SMS SMS command: arm+password Tracker response: Tracker is activated Example: arm123456 Tracker will activate the ACC, shock sensor and door alarm to enter into arming state. If you leave the ignition on (The ACC is on the ON position), tracker cannot enter into arming state, and will reply "set up fail! pls turn off ACC"

If the ignition is off, but the door is not closed properly, then tracker cannot 29 enter into arming state too, and will reply set up fail! pls close the door 6.18.2 Arming with remote control (For B model) key for 0.5 seconds, the car enters into arming state and the siren Press will beep one time, no SMS message notification. If you leave the ignition on (The ACC is on the ON position), tracker cannot enter into arming state, and siren doesnt sound. If the ignition is off, but the door is not closed properly, then tracker cannot enter into arming state too, and siren beeps 3 times to indicate the door is not closed. 6.19 Silent Arming 6.19.1 Silent arming by SMS SMS command: silent+password Tracker response: silent ok!

Example: silent123456 After tracker enters into the silent arming state, the siren doesnt sound even if an alarm is triggered, but tracker will send alarm notification to authorized numbers. 6.19.2 Silent arming with remote control (For B model) Press key in disarm state for 0.5 second, the siren will beep one time, tracker will enter into silent arming state, the siren doesnt sound even if an alarm is triggered, but tracker will send alarm notification to authorized numbers. 6.20 Disarming 6.20.1 Disarming by SMS SMS command: disarm+password Tracker response: Tracker is deactivated. 30 Example: disarm123456 After disarming, the door, shock sensor and ACC alarm will be deactivated, and these alarms wont be triggered any more. 6.20.2 Disarming with remote control (For B model) on for 0.5 second, tracker will enter into disarming state, siren beeps Press two times, no SMS message notification. 6.21 Alarm function in arming state 6.21.1 Door opening alarm When the door is opened in arming state, tracker will send SMS notification Door alarm+latitude & longitude to authorized numbers every 3 minutes. The siren will beep for 20 seconds, and if the door is still open, then the siren will beep for another 20 seconds with 20 seconds pause, disarming to quit the alarm. 6.21.2 ACC (Ignition / voltage) alarm Tracker will send ACC alarm + latitude / longitude to authorized numbers every 3 minutes if the ignition of the vehicle has been switched ON (Key is rotated to ACC ON position when tracker works in arming state. The siren will beep for 20 seconds, and if the ignition is still on, then the siren will beep for another 20 seconds with 20 seconds pause, disarming to quite the alarm. 6.21.3 Acceleration Sensor Alarm There is a built-in three axis acceleration sensor in the tracker to detect the movement, tilt and shock when in arming state and tracker will send Sensor alarm + latitude / longitude to authorized numbers, and only one message in 3 minutes when tracker works in SMS mode. Siren will beep for 5 seconds for the first trigger and second trigger, and then beep 10 seconds for another trigger, disarming to quit the alarm. Sensors sensitivity configuration 31 There are three different levels. First level: Alarm will be triggered by slight vibration. SMS command: sensitivity+password+space+1 . Tracker response: sensitivity ok Example: sensitivity123456 1 Second level: Alarm will be triggered by medium vibration. SMS command: sensitivity+password+space+2 Tracker response: sensitivity ok Example: sensitivity123456 2 Third level: Alarm will be triggered by severe vibration. SMS command: sensitivity+password+space+3 Tracker response: sensitivity ok Example: sensitivity123456 3 6.21.4 No GSM network alarm When the vehicle is in the armed state (Not in the silent mode) and lost GSM signal, if an alarm is triggered (door, vibration, ACC), the siren will beep, but no notification message to authorized numbers. 6.22 Sleep 6.22.1 Sleep mode SMS command: sleep+password+space+on Tracker response: sleep on ok!

Example: sleep123456 on When stop operating the tracker for 3 minutes, it will sleep if there arent any alarm has been set up. Power for GPS module will be cut off, and vibration, a call or SMS can wake up. It consumes less data in sleep mode, GPRS automatically disconnects. When tracker generates an alarm or the vehicle runs, GPRS automatically reconnects to the platform. 32 6.22.2 No sleep mode SMS command: sleep+password+space+off Tracker response: sleep off ok Example: sleep123456 off Tracker does not sleep, GSM and GPS work at all times. (Default mode) 6.23 Check Status SMS command: check+password Tracker response:

Power: ON/OFF Battery: 100%

GPRS: ON/OFF GPS: OK/NO GPS ACC: OFF/ON Door: OFF/ON GSM Signal: 1-32 (The higher, the better) Oil: 100%

APN: cmnet IP: 104.250.138.146 PORT: 9000 Arm: OFF/ON Example: check123456 6.24 Check IMEI SMS command: imei+password Tracker response: xxxxxxxxxxxxxxx (A 15 digits IMEI of your device) Example: imei123456 6.25 Local time setting Tracker works in the local time zone by default. If you find that the time zone is incorrect, you can configure the time zone. 33 SMS command: time+space+zone+password+space+time zone value Tracker responds: time ok Example: time zone123456 8 Note: 8 is the time zone of China, If your country time zone is minus, write the time zone value with a - symbol, for example, time zone123456 -8. 6.26 Reset Hardware This command will reboot the GSM and GPS modules of the tracker. Please note this will not restore factory settings. SMS Command: reset+password Tracker Response: reset ok Example: reset123456 6.27 GPRS configuration for live real-time tracking 6.27.1 Configure APN, GPRS login user name and password Usually, tracker can automatically recognize and select the APN and GPRS user name and password without any configuration. If it cannot connect to the network, Please configure it according to following steps. 6.27.1.1 Configure APN setting APN is an abbreviation for Access Point Name and changes depending on which mobile network you are using. For more information about your local APN, please check with your local wireless carrier. SMS command: APN+password+space+local APN Tracker response: APN OK Example: APN123456 CMNET Note: 123456 is trackers default password, you can change the 34 password on App or refers to section 6.1. 6.27.1.2 Configure user name and password In the most countries, the user name and password of GPRS are not necessary; therefore, you can ignore this step if it is not necessary for your local network. For those countries requiring user name and password, please configure as following:

SMS command: up+password+space+user+space+password Tracker response: user, password ok!

Example: up123456 Jonnes 666666 Note: 123456 means the password of the device, Jonnes means the user name of gprs, and 666666 means password of gprs, please configure it according to the user name and password of your local ones, you can check this information with your local wireless carrier. 6.27.2 Configure domain name and port Tracker connects to tracker.baanool.net:8090 by default. If you need to connect to another domain name, please configure it. SMS command: dns+password+space+DNS domain name+space+port Tracker response: dns success!

Example 1: dns123456 04.GPSTrackerXY.com 9000 Example 2: dns123456 tracker.baanool.net 8090 Note: 123456 is trackers password, 04.GPSTrackerXY.com is the DNS, 9000 is port. If you want to configure IP instead of DNS, then please send SMS command:

adminip+password+space+IP+space+port 6.27.3 GPRS / SMS mode switch The GPRS mode is the default one, if you need to switch, pls refers to the following instructions. 35 6.27.3.1 GPRS mode SMS command: GPRS+password Tracker response: GPRS OK! (It means it has been switched to GPRS mode.) Example: GPRS123456 TCP / UDP switch TCP mode is the default one; you dont need to configure this step if the web platform works with TCP mode, but you need to configure it as following when you are using a platform which only works with UDP. SMS command to switch to TCP mode: GPRS+password,0,0 SMS command to switch to UDP mode: GPRS+password,1,1 Tracker response: GPRS OK!

Example: GPRS123456,0,0 GPRS123456,1,1 6.27.3.2 SMS mode Switch to SMS mode will disconnect the GPRS connection for live tracking. SMS command: SMS+password Tracker response: SMS OK! ( It means it has been switched to SMS mode.) Example: SMS123456 6.28 Activate Fuel value in GPRS data GPRS data string has no fuel value by default, if you need the fuel value in GPRS data string, please configure it as following:

SMS command: protocol+password 18 Tracker response: protocol 18 ok Example: protocol123456 18 If you want to change back to the default data string, please configure as following:

36 SMS command: protocol+password 12 Tracker response: protocol 12 ok Example: protocol123456 12 Note: By default, tracker is connected to tracker.baanool.net:8090 with fuel value, so no need to configure this step. If you are using another IP or domain name, use this command to activate the fuel value. 6.29 Configure SMS management center number SMS command: centernum+password+space+phone number Tracker response: centernum ok Example: centernum123456 13322221111 After the SMS management center number is set successfully, the "Continuous interval tracking" messages will be sent to this number. If the management center number needs to receive the alarm notification message, please set this number as an authorized number too. Cancel SMS management center number SMS command: nocenternum+password Tracker response: nocenternum ok Example: nocenternum123456 6.30 Configure heartbeat package interval The default heartbeat interval to keep GPRS connection alive is 100 seconds; you can change it if necessary, but please be kindly informed that if the time interval is too long, it may cause GPRS disconnection. SMS command: heartbeat+password+space+time interval Tracker response: heartbeat ok Example: heartbeat123456 120 Note: (123456 means trackers password, 120 means the interval. The minimum interval is 60 seconds, and tracker will continue to send heartbeat every 60 seconds if you configure it less than 60 seconds. 6.31 Initialization If the tracker cannot work properly, you can send command to initialize it to 37 return to default factory settings. SMS command: begin+password Tracker response: begin ok Example: begin123456 7 Cautions Please be sure to follow when using:

1. Keep the tracker used in a dry environment. The humid environment can easily damage internal circuits. 2. Please do not put it in a dusty environment. 3. Do not put the tracker in overheated or overcooled places. 4. Handle carefully. Dont vibrate or shake it violently. 5. Please clean with a dry cloth, do not use chemicals and detergents. 6. Please do not paint the device; this may lead to internal circuit failure. 7. Do not disassemble the device. 8. Please read the user manual carefully before installation and operation, and understand voltage range. Otherwise, it wont work properly or damage the tracker. 8 Troubleshooting Faults Solution Fail to turn on 1. Please check if the power wiring is correct?

2. Please check if the power voltage is correct?

No GSM signal 1. Check whether the SIM card is put in place 2. Whether the SIM card is a GSM network SIM card 3. Dont turn on the PIN code 4. Call forwarding cannot be opened. No GPS signal The device needs to be in an unobstructed position to ensure that it can receive GPS signals normally. No response for SMS command 1. No credit on SIM card. 2. The format of the SMS command is incorrect. No response for a call 1. Did you have set up the authorized phone number?

2. If authorized number exists, did you make the call from an authorized phone number?

38 No alarm notification message Fail to stop engine Remote control cannot be used 1. Authorized number has not been set up. 2. The format of the phone number is incorrect. 1. Please check whether the engine stop wiring connected correctly?

2. Please check whether the speed is higher than the speed to execute the stop command when using Delay execution way?

Turn off tracker, and turn it on to program the remote control again. Siren doesnt work This tracker drives the speaker output voltage DC12V/24V/1A, if it is a negative trigger speaker, it will not be driven. Warranty Card IMEI:

Distributor:

Date of purchase:

Description of the failure:

Distributors stamp 39 FCC Warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

GPS TRACKER Model:403 FCC ID:2ATUKBN-403 Shenzhen Coban Electronics Co., Ltd. 5/F, Block 22, Wisdomland Business Park, Guankou 2nd Road, Nantou, Nanshan District ,Shenzhen, Guangdong, China.518052

SHENZHEN COBAN ELECTRONICS CO., LTD Address: 5/F, B lock 22, W isdomland B usiness Park, G uankou 2nd R oad, N antou, Nanshan District ,Shenzhen, Guangdong, China.518052 Tel: +86-755-26509579 Email: sales08@coban.net Date: 2022-03-01 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We, SHENZHEN COBAN ELECTRONICS CO., LTD hereby authorize Shenzhen Accurate Technology Co., Ltd. to act as a laboratory for testing and test report generation for the following project(s):

(Product name:GPS TRACKER, FCC ID: 2ATUKBN-403, Model name:

403/403ABCD/GPS-403/GPS-403ABCD/ GPS-403A/GPS-403B/ GPS-403C/

GPS-403D/ BN-403/BN-403ABCD/ BN-403A/ BN-403B/ BN-403C/ BN-403D) This chip ASR1601E used in this device for US only supports GSM/GPRS850, PCS/GPRS1900 and LTE Band2/4/5/7 functions, other functions were disabled by software. We c onfirm t hat a ll i nformation a bove i s t rue, a nd w ell be r esponsible f or a ll t he consequences. Please contact me if you have any question. Sincerely, Signature:

MEIJIAN LIU General manager

SHENZHEN COBAN ELECTRONICS CO.,LTD Address: 5/F, Block 22, Wisdomland Business Park, Guankou 2nd Road, Nantou, Nanshan District, Shenzhen, Guangdong, China.518052 Tel: +86-755-26509579 Email: sales08@coban.net Product Similarity Declaration We SHENZHEN COBAN ELECTRONICS CO.,LTD, hereby declare that we have an GPS TRACKER as Product name (Model: 403, FCC ID: 2ATUKBN-403)was tested by Shenzhen Accurate Technology Co., Ltd., meanwhile, we would like to show the models (403/403ABCD/GPS-403/GPS-403ABCD/ GPS-403A/GPS-403B/GPS-403C/GPS-403D/

BN-403/BN-403ABCD/BN-403A/BN-403B/BN-403C/BN-403D) on the report and certificate for our marketing purpose, The above models except for different name, everything else is the same. We confirm that all information above is true, and well be responsible for all the consequences. Please contact me if you have any question. 2022-03-01 Dear Sir/Madam, Sincerely Yours, Signature:

Name: MEIJIAN LIU Title: General manager

SHENZHEN COBAN ELECTRONICS CO., LTD Address: 5/F, Block 22, Wisdomland Business Park, Guankou 2nd Road, Nantou, Nanshan District ,Shenzhen, Guangdong, China.518052 Tel: +86-755-26509579 Email: sales08@coban.net FCC Confidential Authorization Date: 2022-03-01 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2ATUKBN-403 In accordance with Sections 0.457 and 0.459 of the Commissions Rules, SHENZHEN COBAN ELECTRONICS CO.,LTD hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description Parts List/Tune up procedure (for licensed devices) The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature:

MEIJIAN LIU General manager

SHENZHEN COBAN ELECTRONICS CO.,LTD Address: 5/F, Block 22, Wisdomland Business Park, Guankou 2nd Road, Nantou, Nanshan District, Shenzhen, Guangdong, China.518052 Tel: +86-755-26509579 Email: sales08@coban.net FCC Authorization Date: 2022-03-01 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We SHENZHEN COBAN ELECTRONICS CO.,LTD the undersigned, hereby authorizes Shenzhen Accurate Technology Co., Ltd. to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Shenzhen Accurate Technology Co., Ltd. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, This authorization is valid until further written notice from the applicant. 21 U.S.C. 862. Sincerely Yours, Signature:

MEIJIAN LIU General manager QA-FR-170-B 7/29/2014