all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 677.90 KiB | May 08 2019 | |||
1 |
|
Internal photos | Internal Photos | 3.35 MiB | May 08 2019 | |||
1 |
|
External photos | External Photos | 2.24 MiB | May 08 2019 | |||
1 |
|
Label and location | ID Label/Location Info | 1.26 MiB | May 08 2019 | |||
1 |
|
Authorization Letter | Cover Letter(s) | 44.59 KiB | May 08 2019 | |||
1 | Block Diagram | Block Diagram | August 05 2019 | confidential | ||||
1 |
|
Family Model Letter | Cover Letter(s) | 28.28 KiB | May 08 2019 | |||
1 |
|
LTC Letter | Cover Letter(s) | 24.71 KiB | May 08 2019 | |||
1 | Operational Description | Operational Description | August 05 2019 | confidential | ||||
1 |
|
RF Exposure report | RF Exposure Info | 1.04 MiB | May 08 2019 | |||
1 |
|
RF Test Report | Test Report | 3.37 MiB | May 08 2019 | |||
1 |
|
RF Test set-up photo | Test Setup Photos | 1.51 MiB | May 08 2019 | |||
1 | Schematics | Schematics | August 05 2019 | confidential | ||||
1 |
|
WIFI Channel 12&13 Description letter | Cover Letter(s) | 118.93 KiB | May 08 2019 |
1 | User Manual | Users Manual | 677.90 KiB | May 08 2019 |
SmartWIFICamerawithBattery QuickUserGuide 100%WireFreeIPCamerawithrechargeablebattery PlaceitAnywhere,WatchonPhoneAnytime 1 1. ProductDetails No. Camerakey PowerKey 1 PowerKey 2 3 ResetKey ResetKey 4 LEDStatus No. Description SlowblinkingRed FastblinkingRed SolidonRed SolidonBlue SlowblinkingBlue 1 2 3 4 5 Operation Pressandholdfor5secondstopoweron/poweroff Quickpress1secondtowakeupthecamerafromstandbymode Pressandholdfor5seconds,itwillresetandrestart QuicklyclicktoenterAPdistributionmode Operation AwaitingWiFiConnectionStartaddingdevices WiFiConnecting Networkisabnormal WiFiConnectednormalwork APmode 2. InstallCloudedgeAPP SearchCloudedgeinAppstoreorgoogleplay,orscanbelowQRCodetodownloadandinstall onsmartphone. 2 NOTE:PleaseALLOWbelow2permissionswhenfirstrunningApp. 1. AllowCloudEdgeusemobilecellulardataandwirelessLAN(Ifnotallowed,itwillbe failedtoaddIPcamera). 2. AllowCloudEdgetogetsystempushmessagepermissions(Whenthecameratriggers motiondetectionoraudiblealarm,thephonecanreceivealarmpush). RegisterAccount New users need to register by email, click "Register", follow the steps to complete the registrationoftheaccount,andlogin. 2.1 Incaseofanyproductproblemsorquestions,pleasegoto the Feedback page in the CloudEdge APP and describe the details of the problem and send it to us (recommended to enteryouremailaddress,wewillreplyyoubyemailwithin24 hourstoansweryourquestions) 3. Poweronthecamera PressandholdonthePowerButtonfor5secondstoTurnonCamera(ifcannotpoweron,please pluginDC5V1A/2Apoweradaptertocharge15minfirst), ensuretheindicatorlightslowlyblinkinginRED,Thecamerastartedsuccessfully NOTE:DC5V1A/2APoweradapterisnotincludedinpackinglist. 3 4.Addcamera 4.1Bringthecameraandphonetotherouterwithin1to3feet(30to100cm)andconnectwifi. NOTE:Pleasenotecameraonlyworksunder2.4GWiFi,notsupports5GWiFi. 4.2RunCloudEdgeApp,Click 4.3Followtheinstructionstoensurethatthecameraisactivatedandtheindicatorlightenters andselectBATTERYCAMERA. theredlightandflashesslowly. 4.4 Select 2.4Ghz WiFi SSID and input password, tap NEXT ThedevicelensisaimedattheQRcodeon thephonescreenwithadistanceof15cm. AfterthedevicerecognizestheQRcode,it willsound"bugu",thentap"HearTone". 4.5PuttheQRcodeinfrontofthecameralens15cm. 4.6AfterclickingHeartone,camerawillstartconnectingwifiandskiptoSearchtoDevice pageaftersetupfinished,youcaneditcameranamehere,thenclickDONEtoopencamerain MyDevicelist,nowyoucanwatchrealtimevideo. 4 5.DeviceMenu 1.Addacamera 2.Cameratime 3.Liveviewbutton 4.Cameratypeicon 5.Cameraname 6.Alarm information icon red dot indicates alarmoccurs,clicktoviewalarmscreenshot orvideo 7.Mydevicelist 8.Messages 9.Friendoptions 10.Personalhomepage 11.Camerasettingsoptions,suchasalarm SDcard,etc. 12.Batterycapacity 13.SD,HDoptions 14.Fullscreenoption 15.Bitrate 5 it is on, and 16.Networksignalstrength 17.Previewoptions 18.playbackoptions 19.Screenshotbutton 20.Recordbutton 21.Humanbodydetectionoption.green is activated, default is infrared detected by human body detection. 22.Soundoptions,startcanlisten 23. Intercom option, long press it and thencantalk 24.Alarmvideo,clickonittoplay/pause 25.Alarmvideoclip 26. Calendar option, click on it to select thedate 27.Screenshotoptions 28.Recordingoptions 29. Alarm point, view all mobile alarm recordings 6.AdjustthePIRDetectingDistance PIR Body Detection is default on and the default sensitivity is at Mid and the detecting distance is 6 meters (20ft), and it is adjustable in My Device > Device Settings > "Body Detection". Sensitivity Low Medium High DetectingDistance
(Formoving andlivingthings) Upto4meters(13ft) Upto6meters(20ft) Upto8meters(26ft)
*NOTE: Higher sensitivity offers longer detecting distance, but it would lead to morefalsealarms.Youareadvisedtoset up the sensitivity level to Low or Medium when you install the camera outdoors. 7. AlarmPushNotificationandplayback BatterycamerawithPIRsensorisnotdesignedfor7X24alldayrecording,butjustpushalarm messagenotificationtophoneappandrecordvideotoSDcardwhenPIRsensordetectedhuman bodymotionevents,thenyoucanplaybackthemotionvideoswhereveryouareviaCloudEdge App. WhenPIRistriggered,cameraandsystemactions:
1. Alarm Sound in app (please enable cloudedge app notification in mobile setting and also mobilevolumeison) 2.AlarmMessageNotification(pleaseenablecloudedgeappnotificationinmobilesetting) 3.AlarmsnapshotandvideorecordonSDcard(pleaseinsertTFCard) 6 8. Batterymanagement 8.1 Thecamerahasabuiltin6000mAh18650battery,whichcanbeusedfor6090daysin theory,accordingtothewakeupof15timesadayandwatching10minutesofvideo.
(Note:Thelifeofthebatterydependsonthenumberoftimesthecameraiswokenup.The morethenumberofwakeups,thefasterthebatterycapacityisconsumed.) 8.2 Ifthebatterycapacityislessthan20%,theappwillsendanalarmmessagetoremindyou tochargeintime. 8.3 YoucanchargethecameraintotheDC5V/1Apoweradapter,orremovethebuiltintwo 18650 batteries, charge the battery separately or replace it with a new one (Note: It is recommendedtouseacompliantbatteryreplacement) 8.4 Ifyourbatterycapacityisconsumedtooquickly,thepossiblecauseisthatthecamerais being woken up too frequently. It is recommended that you turn down the Body Detection sensitivityorturnitoffoccasionally. 9.1Toreducefalsealarms,pleasenotethat:
Do not install the camera facing any objects with bright lights, including sunshine, bright 9. ImportantNotesforReducingFalseAlarms lamplights,etc. Donotplacethecameratooclosetoaplacewheretherefrequentlymovingvehicles.Based on numerous tests, the recommended distance between the camera and vehicle is 15 meters(55ft). Stay away from the outlets, including air conditioner vents, humidifier outlets, the heat transferventsoftheprojectors,etc. Donotinstallthecamerafacingthemirror. Keepthecameraatleast1meterawayfromanywirelessdevices,includingWiFirouters andphones,inordertoavoidwirelessinterference. 7 9.2CovertheMonitoringArea Wheninstallingthecamera,itsnotsuggestedtomakethePIRsensorverticallyfacethemoving object, otherwise it may not detect the motion events. It is suggested to make the angular betweenPIRsensoranddetectedobjectlargerthan10degree. Appendix:troubleshootingsheet TroubleShootingSheet No. 1 Description Unabletoconnect 2 3 4 5 6 7 8 9 Reset Changetoanewnetwork Alarm picture without people NoAlarmPush NoAlarmVideoRecord Deviceoffline Browsevideodelay Shortbatterylife 10 Cannot start camera after replacingbattery Solutionandoperation 1) CheckyourWiFinameandpassword 2) EnsureyourWiFiis2.4G,notsupport5G 3) Ensureyourcameraandphoneclosetorouter 1) Pressandholdtheresetbuttonfor5seconds 2) Hearonebugusound 3) Redlightturnstoslowblinking 1) Pressresetkeytofactorydefaultsetting 2) Reconnection 1. The camera takes time to wake up, and people movetoofast 2.someobjectsaround36 ismovinginthepicture EnableCloudEdgeappnotificationinmobilesettings PleaseinsertTFCard Checkifthenetworkissmooth Check the WIFI network, the distance between the cameraandtheroutershouldnotbetoofar The camera has been awakened too many times.It should not be installed on the side of the road or exposedtothesun. 1,checkthebatterypositiveandnegative 2,checkifthebatteryisnormal 8 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Responsible for compliance could void the users authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). the party Any Changes or modifications not expressly approved by responsible for compliance could void the user's authority to operate the equipment. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with
. minimum distance 20cm between the radiator and your body.
1 | Internal photos | Internal Photos | 3.35 MiB | May 08 2019 |
Page: 6 of 12 Appendix EUT Internal Photographs Model: ZS-GX5 TB-RF-074-1.0 Page: 7 of 12 TB-RF-074-1.0 Page: 8 of 12 TB-RF-074-1.0 Page: 9 of 12 TB-RF-074-1.0 Page: 10 of 12 TB-RF-074-1.0
1 | External photos | External Photos | 2.24 MiB | May 08 2019 |
Page: 3 of 12 Appendix EUT External Photographs Model: ZS-GX5 TB-RF-074-1.0 Page: 4 of 12 TB-RF-074-1.0 Page: 5 of 12 TB-RF-074-1.0
1 | Label and location | ID Label/Location Info | 1.26 MiB | May 08 2019 |
Page: 1 of 12 Appendix FCC ID Label Model: ZS-GX5 Wide & length:25mm *15mm Smart WIFI Camera with Battery FCC ID: 2AT5D-ZS-GX5 Model: ZS-GX5 Input: DC 5 V TB-RF-074-1.0 Page: 2 of 12 Appendix ID Label Location ID LOCATION Model: ZS-GX5 TB-RF-074-1.0
1 | Authorization Letter | Cover Letter(s) | 44.59 KiB | May 08 2019 |
Tel: 408-526-1188 Fax: 408-526-1088 Email: sales.eaw@us.bureauveritas.com 775 Montague Expressway Milpitas, CA 95035 Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Initial Release (obsolete) Revised wording (obsolete) Updated company template (obsolete) Updated letter information (obsolete) Added FCC ID field (obsolete) Updated company name & logo (current) Revision History To 1.0 2.0 3.0 4.0 5.0 6.0 From 1.0 1.0 2.0 3.0 4.0 5.0 Approved Date Nov-14-2006 Sept25-2007 Jan-31-2012 May-23-2014 Sep-16-2014 Jun-27-2018 SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 6.0 Shenzhen CTV video intelligence Co.,Ltd 2019-07-26 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, _____ Shenzhen CTV video intelligence Co.,Ltd _____ hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s):
Pruduct Description: Smart WIFI Camera with Battery Model Name: ZS-GX5,ZS-GX1S,ZS-GX2S,ZS-GX3S,ZS-GX4S,ZS-GX5S, ZS-GX6S,ZS-GQ1,ZS-GQ2,ZS-GQ3,ZS-GQ4,ZM-Q1 FCC ID: 2AT5D-ZS-GX5 Sincerely, Clients signature:
Clients name / title: Guangqing Liu / CEO Telephone: +86 15814636688 Fax No: +86 0755-89373554 Email: zs@ctvzn.com Contact information / address: 6F,P building,Weikangde Industrial Park,Shangxue Hi-Tech Park,BanTian Road,longgang District,Shenzhen,P.R China SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 6.0
1 | Family Model Letter | Cover Letter(s) | 28.28 KiB | May 08 2019 |
Shenzhen CTV video intelligence Co.,Ltd Model Declaration Letter For FCC ID: 2AT5D-ZS-GX5 We, the undersigning company Company Name: Shenzhen CTV video intelligence Co.,Ltd Address: 6F,P building,Weikangde Industrial Park,Shangxue Hi-Tech Park,BanTian Road,longgang District,Shenzhen,P.R China Hereby confirm that the following products:
Product description: Smart WIFI Camera with Battery Models No.: ZS-GX5,ZS-GX1S,ZS-GX2S,ZS-GX3S,ZS-GX4S,ZS-GX5S, ZS-GX6S,ZS-GQ1,ZS-GQ2,ZS-GQ3,ZS-GQ4,ZM-Q1 All these models are identical in the same PCB layout and electrical circuit, Only the color is different for commercial. City and Country:
Date:
Name:
Function:
Signature:
(this must be a person)
(or official company stamp) Shenzhen, China 07/26/2019 Guangqing Liu CEO
1 | LTC Letter | Cover Letter(s) | 24.71 KiB | May 08 2019 |
775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: sales.eaw@us.bureauveritas.com Confidentiality Request Letter Reason for Amendment (current / obsolete) Initial Release (obsolete) Adding CFR 2.459 (obsolete) Updated company template & Added text box Added IC confidentiality letter form (obsolete) Corrections to STC form. Added reference to KDB
(obsolete)
(obsolete) Updated company logo (current) Revision History To 1.0 2.0 3.0 From 1.0 1.0 2.0 Approved Date Nov-14-2006 August 11 - 2008 Jan-31-2012 3.0 4.0 5.0 4.0 5.0 6.0 March-26-2015 Nov-19-2015 Jun-26-2019 SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 6.0 Shenzhen CTV video intelligence Co.,Ltd 2019-07-26 To:
Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2AT5D-ZS-GX5 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as:
- Block Diagram
- Schematics
- Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Clients name / title: Guangqing Liu / CEO Telephone: +86 15814636688 Fax No: +86 0755-89373554 Email: zs@ctvzn.com Contact information / address: 6F,P building,Weikangde Industrial Park,Shangxue Hi-Tech Park,BanTian Road,longgang District,Shenzhen,P.R China SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 6.0
1 | RF Exposure report | RF Exposure Info | 1.04 MiB | May 08 2019 |
Shenzhen Toby Technology Co., Ltd. Report No.: TB-MPE167485 Page: 1 of 3 Maximum Permissible Exposure Evaluation FCC ID: 2AT5D-ZS-GX5 1. Client Information Applicant Address
: Shenzhen CTV video intelligence Co.,Ltd
: 6F,P building,Weikangde Industrial Park,Shangxue Hi-Tech Park,BanTian Road,longgang District,Shenzhen,P.R China Manufacturer : Shenzhen CTV video intelligence Co.,Ltd Address
: 6F,P building,Weikangde Industrial Park,Shangxue Hi-Tech Park,BanTian Road,longgang District,Shenzhen,P.R China 2. General Description of EUT EUT Name Models No. Model Different
: Smart WIFI Camera with Battery
: ZS-GX5,ZS-GX1S,ZS-GX2S,ZS-GX3S,ZS-GX4S,ZS-GX5S,
: All these models are identical in the same PCB layout and ZS-GX6S,ZS-GQ1,ZS-GQ2,ZS-GQ3,ZS-GQ4,ZM-Q1 electrical circuit, Only the color is different for commercial. Operation Frequency:
RF Output Power:
802.11b/g/n(HT20): 2412MHz~2462MHz 802.11n(HT40): 2422MHz~2452MHz 802.11b: 15.80dBm 802.11g: 14.81dBm 802.11n (HT20): 14.10dBm 802.11n (HT40): 12.83dBm 3dBi Dipole Antenna 802.11b: DSSS(CCK, DQPSK, DBPSK) 802.11g/n: OFDM(BPSK,QPSK,16QAM, 64QAM) Product Description
:
Antenna Gain:
Modulation Type:
Power Supply Software Version Hardware Version DC 3.6V by 11.5Wh Li-ion battery*2.
: DC 5 Voltage by AC/DC Adapter supplied
: ppstrong-c2-neutral-2.6.2.20190128-upgrade
: PCB-C80S-MAIN-F23-REV1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Baoan, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195 TB-RF-075-1.0 Report No.: TB-MPE167485 Page: 2 of 3 MPE Calculations for WIFI 1. Antenna Gain:
FPC Antenna: 3dBi. 2. EUT Operation Condition:
Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 3. Exposure Evaluation:
Equation from page 18 of OET Bulletin 65, Edition 97-01 S=(PG)/4R2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna 4. Test Result:
Conducted Power(max)
(dBm) 15.80 14.81 14.10 12.83 Mode 802.11b 802.11g 802.11n
(HT20) 802.11n
(HT40) Turn-up Power
(dB) 151 151 141 131 Max tune up power
(dBm)
[P]
16 16 15 14 ANT Gain
(dBi)
[G]
Distance
(cm)
[R]
3 3 3 3 20 20 20 20 Power Density
(mW/ cm2)
[S]
0.015803 0.015803 0.012553 0.009971 TB-RF-075-1.0 Report No.: TB-MPE167485 Page: 3 of 3 5. Conclusion:
As specified in Table 1B of 47 CFR 1.1310- Limits for Maximum Permissible Exposure (MPE), Limits for General Population/ Uncontrolled Exposure Frequency Range
(MHz) 300-1,500 1,500-100,000 Power density
(mW/ cm2) F/1500 1.0 For 802.11b/g/n(HT20):2412~2462 MHz 802.11n(HT40): 2422MHz~2452MHz MPE limit S: 1mW/ cm2 The MPE is calculated as 0.015803mW / cm2 < limit 1mW / cm2. So, RF exposure limit warning or SAR test are not required. The EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47 CFR2.1091
(b). The RF Exposure Information page from the manual is included here for reference. For a more detailed features description, please refer to the RF Test Report. Note
-----END OF REPORT-----
TB-RF-075-1.0
1 | RF Test Report | Test Report | 3.37 MiB | May 08 2019 |
Shenzhen Toby Technology Co., Ltd. Report No.: TB-FCC167484 Page: 1 of 75 FCC Radio Test Report FCC ID: 2AT5D-ZS-GX5 Original Grant
: TB-FCC167484
: Shenzhen CTV video intelligence Co.,Ltd Report No. Applicant Equipment Under Test (EUT) EUT Name Model No.
: Smart WIFI Camera with Battery
: ZS-GX5
: ZS-GX1S,ZS-GX2S,ZS-GX3S,ZS-GX4S,ZS-GX5S, ZS-GX6S,ZS-GQ1,ZS-GQ2,ZS-GQ3,ZS-GQ4,ZM-Q1
: N/A
:
:
:
: FCC Part 15, Subpart C (15.247:2019)
: ANSI C63.10: 2013
: PASS 2019-07-16 2019-07-18 to 2019-07-23 2019-07-25 In the configuration tested, the EUT complied with the standards specified above, The EUT technically complies with the FCC and IC requirements Series Model No. Brand Name Receipt Date Test Date Issue Date Standards Test Method Conclusions Test/Witness Engineer :
Approved&
Authorized
:
This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. TB-RF-074-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Baoan, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195 Report No.: TB-FCC167484 Page: 2 of 75 Contents 5. 2. 3. 4. CONTENTS ............................................................................................................................................. 2 GENERAL INFORMATION ABOUT EUT ............................................................................. 5 1. 1.1 Client Information ................................................................................................................. 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 6 1.4 Description of Support Units .............................................................................................. 6 1.5 Description of Test Mode .................................................................................................... 7 1.6 Description of Test Software Setting ................................................................................ 8 1.7 Measurement Uncertainty .................................................................................................. 8 1.8 Test Facility ........................................................................................................................... 9 TEST SUMMARY ..................................................................................................................... 10 TEST EQUIPMENT .................................................................................................................. 11 CONDUCTED EMISSION TEST ........................................................................................... 11 4.1 Test Standard and Limit .................................................................................................... 12 4.2 Test Setup ........................................................................................................................... 12 4.3 Test Procedure ................................................................................................................... 12 4.4 EUT Operating Mode ........................................................................................................ 13 4.5 Test Data ............................................................................................................................. 13 RADIATED EMISSION TEST ................................................................................................ 14 5.1 Test Standard and Limit .................................................................................................... 14 5.2 Test Setup ........................................................................................................................... 15 5.3 Test Procedure ................................................................................................................... 16 5.4 EUT Operating Condition ................................................................................................. 17 5.5 Test Data ............................................................................................................................. 17 RESTRICTED BANDS AND BAND-EDGE TEST ............................................................. 18 6.1 Test Standard and Limit .................................................................................................... 18 6.2 Test Setup ........................................................................................................................... 18 6.3 Test Procedure ................................................................................................................... 18 6.4 EUT Operating Condition ................................................................................................. 19 6.5 Test Data ............................................................................................................................. 19 BANDWIDTH TEST ................................................................................................................. 20 7.1 Test Standard and Limit .................................................................................................... 20 7.2 Test Setup ........................................................................................................................... 20 7.3 Test Procedure ................................................................................................................... 20 7.4 EUT Operating Condition ................................................................................................. 20 7.5 Test Data ............................................................................................................................. 20 PEAK OUTPUT POWER TEST ............................................................................................. 21 8.1 Test Standard and Limit .................................................................................................... 21 8.2 Test Setup ........................................................................................................................... 21 8.3 Test Procedure ................................................................................................................... 21 6. 7. 8. TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 3 of 75 9. 8.4 EUT Operating Condition ................................................................................................. 21 8.5 Test Data ............................................................................................................................. 21 POWER SPECTRAL DENSITY TEST ................................................................................. 22 9.1 Test Standard and Limit .................................................................................................... 22 9.2 Test Setup ........................................................................................................................... 22 9.3 Test Procedure ................................................................................................................... 22 9.4 EUT Operating Condition ................................................................................................. 22 9.5 Test Data ............................................................................................................................. 22 10. ANTENNA REQUIREMENT ................................................................................................... 23 10.1 Standard Requirement .................................................................................................... 23 10.2 Antenna Connected Construction ................................................................................. 23 ATTACHMENT A-- CONDUCTED EMISSION TEST DATA ....................................................... 24 ATTACHMENT B-- RADIATED EMISSION AND RESTRICTED BANDS REQUIREMENT TEST DATA .......................................................................................................................................... 26 ATTACHMENT C-- CONDUCTED BAND EDGE TEST ............................................................... 52 ATTACHMENT D-- CONDUCTED RF SPURIOUS EMISSION TEST DATA ........................... 56 ATTACHMENT E-- BANDWIDTH TEST DATA ............................................................................. 57 ATTACHMENT F-- PEAK OUTPUT POWER TEST DATA ......................................................... 65 ATTACHMENT G-- POWER SPECTRAL DENSITY TEST DATA ............................................. 68 TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 4 of 75 Revision History Description Report No. Version Issued Date TB-FCC167484 Rev.01 Initial issue of report 2019-07-25 TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 5 of 75 1. General Information about EUT 1.1 Client Information Applicant Address Manufacturer Address
: Shenzhen CTV video intelligence Co.,Ltd
: 6F,P building,Weikangde Industrial Park,Shangxue Hi-Tech Park,BanTian Road,longgang District,Shenzhen,P.R China
: Shenzhen CTV video intelligence Co.,Ltd
: 6F,P building,Weikangde Industrial Park,Shangxue Hi-Tech Park,BanTian Road,longgang District,Shenzhen,P.R China 1.2 General Description of EUT (Equipment Under Test) EUT Name Models No. Model Difference Product Description Power Supply Software Version Hardware Version Connecting Port(S) I/O
: Smart WIFI Camera with Battery
: ZS-GX5,ZS-GX1S,ZS-GX2S,ZS-GX3S,ZS-GX4S,ZS-GX5S,
: All these models are identical in the same PCB layout and ZS-GX6S,ZS-GQ1,ZS-GQ2,ZS-GQ3,ZS-GQ4,ZM-Q1
:
electrical circuit, Only the color is different for commercial. 802.11b/g/n(HT20): 2412MHz~2462MHz Operation 802.11n(HT40): 2422MHz~2452MHz Frequency:
Number of 802.11b/g/n(HT20):11 channels see note(3) 802.11n(HT40):7 channels see note(3) Channel:
Max Output 802.11b: 15.80dBm Power:
Antenna Gain: 3dBi Dipole Antenna Modulation Type:
802.11b: DSSS(CCK, DQPSK, DBPSK) 802.11g/n: OFDM(BPSK,QPSK,16QAM, 64QAM) 802.11b:11/5.5/2/1 Mbps 802.11g:54/48/36/24/18/12/9/6 Mbps 802.11n:up to 150Mbps
: DC 5 Voltage by AC/DC Adapter supplied
: ppstrong-c2-neutral-2.6.2.20190128-upgrade
: PCB-C80S-MAIN-F23-REV1.0
:
DC 3.6V by 11.5Wh Li-ion battery*2. Please refer to the User's Manual Bit Rate of Transmitter:
Note:
(1) This Test Report is FCC Part 15.247 for 802.11b/g/n, the test procedure follows the FCC KDB 558074 D01 v05r02.
(2) For a more detailed features description, please refer to the manufacturers specifications or TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 6 of 75 the Users Manual.
(3) Channel List:
Channel 01 02 03 04 Frequency
(MHz) 2412 2417 2422 2427 Channel 05 06 07 08 Frequency
(MHz) 2432 2437 2442 2447 Channel 09 10 11 Frequency
(MHz) 2452 2457 2462 Note:CH 01~CH 11 for 802.11b/g/n(HT20), CH 03~CH 09 for 802.11n(HT40)
(4) The Antenna information about the equipment is provided by the applicant. 1.3 Block Diagram Showing the Configuration of System Tested Adapter + TX Mode Adapter EUT TX Mode EUT 1.4 Description of Support Units Equipment Information Name Model FCC ID/VOC Manufacturer Adapter BSY02D050200V
----
BSY Used Cable Information Number
----
Shielded Type Ferrite Core
----
----
Length
----
Note TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 7 of 75 1.5 Description of Test Mode To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test configuration mode(s) mentioned follow was evaluated respectively. Final Test Mode Mode 1 Final Test Mode Mode 2 Mode 3 Mode 4 Mode 5 For Conducted Test Description Adapter + TX B Mode For Radiated Test Description TX Mode B Mode Channel 01/06/11 TX Mode G Mode Channel 01/06/11 TX Mode N(HT20) Mode Channel 01/06/11 TX Mode N(HT40) Mode Channel 03/06/09 Note:
(1) For all test, we have verified the construction and function in typical operation. And all the test modes were carried out with the EUT in transmitting operation in maximum power with all kinds of data rate. According to ANSI C63.10 standards, the measurements are performed at the highest, Middle, lowest available channels, and the worst case data rate as follows:
802.11b Mode: CCK (1 Mbps) 802.11g Mode: OFDM (6 Mbps) 802.11n (HT20) Mode: MCS 0 (6.5 Mbps) 802.11n (HT40) Mode: MCS 0 (13 Mbps) mode was programmed by the customer.
(2) During the testing procedure, the continuously transmitting with the maximum power
(3) The EUT is considered a portable unit; in normal use it was positioned on X-plane. The worst case was found positioned on X-plane. Therefore only the test data of this X-plane was used for radiated emission measurement test. TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 8 of 75 1.6 Description of Test Software Setting During testing channel&Power controlling software provided by the customer was used to control the operating channel as well as the output power level. The RF output power selection is for the setting of RF output power expected by the customer and is going to be fixed on the firmware of the final end product power parameters of WLAN. Test Software Version Channel IEEE 802.11b DSSS IEEE 802.11g OFDM IEEE 802.11n (HT20) Channel IEEE 802.11n (HT40) CH 01 DEF DEF DEF CH 03 DEF 1.7 Measurement Uncertainty CMD.exe CH 06 DEF DEF DEF CH 06 DEF CH 11 DEF DEF DEF CH 09 DEF The reported uncertainty of measurement y Uwhere expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2 providing a level of confidence of approximately 95 %. Test Item Conducted Emission Radiated Emission Radiated Emission Radiated Emission Parameters Level Accuracy:
9kHz~150kHz 150kHz to 30MHz Level Accuracy:
9kHz to 30 MHz Level Accuracy:
30MHz to 1000 MHz Level Accuracy:
Above 1000MHz Expanded Uncertainty (ULab) 3.42 dB 3.42 dB 4.60 dB 4.40 dB 4.20 dB TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 9 of 75 1.8 Test Facility The testing was performed by the Shenzhen Toby Technology Co., Ltd., in their facilities located at:1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Baoan, Shenzhen, Guangdong, China. At the time of testing, the following bodies accredited the Laboratory:
CNAS (L5813) The Laboratory has been accredited by CNAS to ISO/IEC 17025: 2005 General Requirements for the Competence of Testing and Calibration Laboratories for the competence in the field of testing. And the Registration No.: CNAS L5813. FCC Accredited Test Site Number: 854351. A2LA Certificate No.: 4750.01 laboratory has been accredited by American Association The for Laboratory Accreditation(A2LA) to ISO/IEC 170252005 General Requirements for the Competence of Testing and Calibration Laboratories for the technical competence in the field of Electrical Testing. And the A2LA Certificate No.: 4750.01. IC Registration No.: (11950A-1) The Laboratory has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing. The site registration: Site# 11950A-1. TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 10 of 75 2. Test Summary FCC Part 15 Subpart C(15.247)/ RSS 247 Issue 1 Test Item Judgment Remark Standard Section IC FCC 15.203
/
15.207 15.205 15.247(a)(2) 15.247(b) 15.247(e) 15.247(d) RSS 247 5.2 (1) RSS 247 5.4 (4) RSS 247 5.2 (2) RSS 247 5.5 Antenna Requirement RSS-GEN 7.2.4 Conducted Emission RSS-GEN 7.2.2 Restricted Bands 6dB Bandwidth PASS Peak Output Power Power Spectral Density Band Edge PASS PASS PASS PASS PASS PASS PASS RSS 247 15.247(d)&
Transmitter Radiated Spurious Emission Note: / for no requirement for this test item. 15.209 5.5 N/A is an abbreviation for Not Applicable. N/A N/A N/A N/A N/A N/A N/A N/A TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 11 of 75 3. Test Equipment Conducted Emission Test Equipment Manufacturer Model No. Serial No. Last Cal. ESCI RSU-A4 100321 34403 Jul. 13, 2019 Jul. 13, 2019 NNBL 8226-2 ENV216 8226-2/164 101131 Jul. 13, 2019 Jul. 13, 2019 Jul. 12, 2020 Jul. 12, 2020 Equipment Manufacturer Model No. Serial No. Last Cal. EMI Test Receiver RF Switching Unit AMN LISN Radiation Emission Test Rohde & Schwarz Compliance Direction Systems Inc SCHWARZBECK Rohde & Schwarz Agilent Rohde & Schwarz Spectrum Analyzer EMI Test Receiver Bilog Antenna Bilog Antenna Horn Antenna Horn Antenna Loop Antenna Pre-amplifier Pre-amplifier Cable Positioning Controller ETS-LINDGREN Antenna Conducted Emission Equipment ETS-LINDGREN ETS-LINDGREN ETS-LINDGREN ETS-LINDGREN SCHWARZBECK Sonoma HP HUBER+SUHNER Manufacturer Spectrum Analyzer Agilent Spectrum Analyzer Rohde & Schwarz MXA Signal Analyzer Agilent Vector Signal Generator Analog Signal Generator Agilent Agilent E4407B ESPI 3142E 3142E 3117 3117 FMZB 1519 B 310N 8449B 100 2090 E4407B ESCI N9020A N5182A N5181A Cal. Due Date Jul. 12, 2020 Jul. 12, 2020 Cal. Due Date Jul. 12, 2020 Jul. 12, 2020 Jan. 26, 2020 Jan. 26, 2020 Mar. 02, 2020 Mar. 02, 2020 Jan. 26, 2020 Mar. 03, 2020 Mar. 02, 2020 Mar. 02, 2020 Cal. Due Date Jul. 12, 2020 Jul. 12, 2020 Sep. 14, 2019 MY45106456 Jul. 13, 2019 100010/007 Jul. 13, 2019 00117537 00117542 00143207 00143209 1519B-059 185903 3008A00849 SUCOFLEX N/A Jan. 27, 2019 Jan. 27, 2019 Mar.03, 2019 Mar.03, 2019 Jan. 27, 2019 Mar.04, 2019 Mar.03, 2019 Mar.03, 2019 N/A N/A Model No. Serial No. Last Cal. MY45106456 Jul. 13, 2019 100010/007 Jul. 13, 2019 MY49100060 Sep. 15, 2018 MY50141294 Sep. 15, 2018 Sep. 14, 2019 MY50141953 Sep. 15, 2018 Sep. 14, 2019 RF Power Sensor DARE!! Instruments RadiPowerRPR3006W DARE!! Instruments RadiPowerRPR3006W DARE!! Instruments RadiPowerRPR3006W DARE!! Instruments RadiPowerRPR3006W 17I00015SNO26 Sep. 15, 2018 Sep. 14, 2019 17I00015SNO29 Sep. 15, 2018 Sep. 14, 2019 17I00015SNO31 Sep. 15, 2018 Sep. 14, 2019 17I00015SNO33 Sep. 15, 2018 Sep. 14, 2019 TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 12 of 75 4. Conducted Emission Test 4.1 Test Standard and Limit 4.1.1Test Standard FCC Part 15.207 4.1.2 Test Limit Conducted Emission Test Limit Frequency 150kHz~500kHz 500kHz~5MHz 5MHz~30MHz Maximum RF Line Voltage (dBV) Quasi-peak Level Average Level 66 ~ 56 *
56 60 56 ~ 46 *
46 50 Notes:
(1) *Decreasing linearly with logarithm of the frequency.
(2) The lower limit shall apply at the transition frequencies.
(3) The limit decrease in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 4.2 Test Setup 4.3 Test Procedure The EUT was placed 0.8 meters from the horizontal ground plane with EUT being connected to the power mains through a line impedance stabilization network (LISN). All other support equipments powered from additional LISN(s). The LISN provide 50 Ohm/
50uH of coupling impedance for the measuring instrument. Interconnecting cables that hang closer than 40 cm to the ground plane shall be folded back and forth in the center forming a bundle 30 to 40 cm long. TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 13 of 75 I/O cables that are not connected to a peripheral shall be bundled in the center. The end of the cable may be terminated, if required, using the correct terminating impedance. The overall length shall not exceed 1 m. LISN at least 80 cm from nearest part of EUT chassis. The bandwidth of EMI test receiver is set at 9kHz, and the test frequency band is from 0.15MHz to 30MHz. 4.4 EUT Operating Mode Please refer to the description of test mode. 4.5 Test Data Please refer to the Attachment A. TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 14 of 75 5. Radiated Emission Test 5.1 Test Standard and Limit 5.1.1 Test Standard FCC Part 15.209 5.1.2 Test Limit Radiated Emission Limits ( 9 kHz~1000 MHz) Frequency
(MHz 0.009~0.490 0.490~1.705 1.705~30.0 30~88 88~216 216~960 Above 960 Field Strength
(microvolt/meter) Measurement Distance
(meters) 2400/F(KHz) 24000/F(KHz) 30 100 150 200 500 300 30 30 3 3 3 3 Radiated Emission Limit (Above 1000MHz) Frequency
(MHz) Above 1000 Distance of 3m (dBuV/m) Peak 74 Average 54 Note:
(1) The tighter limit applies at the band edges.
(2) Emission Level(dBuV/m)=20log Emission Level(uV/m) TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 15 of 75 5.2 Test Setup Below 30MHz Test Setup Below 1000MHz Test Setup TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 16 of 75 Above 1GHz Test Setup 5.3 Test Procedure
(1) The measuring distance of 3m shall be used for measurements at frequency up to 1GHz and above 1 GHz. The EUT was placed on a rotating 0.8m high above ground, the table was rotated 360 degrees to determine the position of the highest radiation.
(2) Measurements at frequency above 1GHz. The EUT was placed on a rotating 1.5m high above the ground. RF absorbers covered the ground plane with a minimum area of 3.0m by 3.0m between the EUT and measurement receiver antenna. The RF absorber shall not exceed 30cm in high above the conducting floor. The table was rotated 360 degrees to determine the position of the highest radiation.
(3) The Test antenna shall vary between 1m and 4m, Both Horizontal and Vertical antenna are set to make measurement.
(4) The initial step in collecting conducted emission data is a spectrum analyzer peak detector mode pre-scanning the measurement frequency range. Significant peaks are then marked and then Quasi Peak detector mode re-measured.
(5) If the Peak Mode measured value compliance with and lower than Quasi Peak Mode Limit Bellow 1 GHz, the EUT shall be deemed to meet QP Limits and then no additional QP Mode measurement performed. But the Peak Value and average value both need to comply with applicable limit above 1 GHz.
(6) Testing frequency range below 1GHz the measuring instrument use VBW=120 kHz with Quasi-peak detection.
(7) Testing frequency range above 1GHz the measuring instrument use RBW=1 MHz and VBW=3 MHz with Peak Detector for Peak Values, and use RBW=1 MHz and VBW=10 Hz with Peak Detector for Average Values.
(8) For the actual test configuration, please see the test setup photo. TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 17 of 75 5.4 EUT Operating Condition The Equipment Under Test was set to Continual Transmitting in maximum power. 5.5 Test Data Remark: During testing above 1GHz the measuring instrument use RBW=1 MHz and VBW=3 MHz with Peak Detector for Peak Values, and use RBW=1 MHz and VBW=10 Hz with Peak Detector for Average Values. Please refer to the Attachment B. TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 18 of 75 6. Restricted Bands and Band-edge test 6.1 Test Standard and Limit 6.1.1 Test Standard FCC Part 15.247(d) FCC Part 15.209 FCC Part 15.205 6.1.2 Test Limit Restricted Frequency Band
(MHz) 2310 ~2390 2483.5 ~2500 Distance of 3m (dBuV/m) Peak 74 74 Average 54 54 6.2 Test Setup 6.3 Test Procedure
(1) The measuring distance of 3m shall be used for measurements at frequency up to 1GHz and above 1 GHz. The EUT was placed on a rotating 0.8m high above ground, the table was rotated 360 degrees to determine the position of the highest radiation.
(2) Measurements at frequency above 1GHz. The EUT was placed on a rotating 1.5m high above the ground. RF absorbers covered the ground plane with a minimum area of 3.0m by 3.0m between the EUT and measurement receiver antenna. The RF absorber shall not exceed 30cm in high above the conducting floor. The table was rotated 360 degrees to determine the position of the highest radiation. TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 19 of 75
(3) The Test antenna shall vary between 1m and 4m, Both Horizontal and Vertical antenna are set to make measurement.
(4) The initial step in collecting conducted emission data is a spectrum analyzer peak detector mode pre-scanning the measurement frequency range. Significant peaks are then marked and then Quasi Peak detector mode re-measured.
(5) If the Peak Mode measured value compliance with and lower than Quasi Peak Mode Limit Bellow 1 GHz, the EUT shall be deemed to meet QP Limits and then no additional QP Mode measurement performed. But the Peak Value and average value both need to comply with applicable limit above 1 GHz.
(6) Testing frequency range below 1GHz the measuring instrument use VBW=120 kHz with Quasi-peak detection.
(7) Testing frequency range above 1GHz the measuring instrument use RBW=1 MHz and VBW=3 MHz with Peak Detector for Peak Values, and use RBW=1 MHz and VBW=10 Hz with Peak Detector for Average Values.
(8) For the actual test configuration, please see the test setup photo. 6.4 EUT Operating Condition The Equipment Under Test was set to Continual Transmitting in maximum power. 6.5 Test Data Please refer to the Attachment C. TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 20 of 75 7. Bandwidth Test 7.1 Test Standard and Limit 7.1.1 Test Standard FCC Part 15.247 (a)(2) 7.1.2 Test Limit FCC Part 15 Subpart C(15.247)/RSS-210 Test Item Bandwidth Limit Frequency Range(MHz)
>=500 KHz
(6dB bandwidth) 2400~2483.5 7.2 Test Setup 7.3 Test Procedure
(1) The EUT was directly connected to the spectrum analyzer and antenna output port as show in the block diagram above.
(2) The bandwidth is measured at an amplitude level reduced 6dB from the reference level. The reference level is the level of the highest amplitude signal observed from the transmitter at the fundamental frequency. Once the reference level is established, the equipment is conditioned with typical modulating signal to produce the worst case (i.e the widest) bandwidth.
(3)Measure the channel separation the spectrum analyzer was set to Resolution Bandwidth:100 kHz, and Video Bandwidth:300 kHz, Detector: Peak, Sweep Time set auto. 7.4 EUT Operating Condition The EUT was set to continuously transmitting in each mode and low, Digital photo framesdle and high channel for the test. 7.5 Test Data Please refer to the Attachment D. TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 21 of 75 8. Peak Output Power Test 8.1 Test Standard and Limit 8.1.1 Test Standard FCC Part 15.247 (b) 8.1.2 Test Limit FCC Part 15 Subpart C(15.247)/RSS-210 Test Item Limit Frequency Range(MHz) Peak Output Power 1 Watt or 30 dBm 2400~2483.5 8.2 Test Setup 8.3 Test Procedure The measurement is according to section 9.1.2 of KDB 558074 D01 15.247 Meas Guidance v05. The EUT was connected to RF power meter via a broadband power sensor as show the block above. The power sensor video bandwidth is greater than or equal to the DTS bandwidth of the equipment. 8.4 EUT Operating Condition The EUT was set to continuously transmitting in the max power during the test. 8.5 Test Data Please refer to the Attachment E. TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 22 of 75 9. Power Spectral Density Test 9.1 Test Standard and Limit 9.1.1 Test Standard FCC Part 15.247 (e) 9.1.2 Test Limit FCC Part 15 Subpart C(15.247) Test Item Limit Frequency Range(MHz) Power Spectral Density 8dBm(in any 3 kHz) 2400~2483.5 9.2 Test Setup 9.3 Test Procedure The EUT was directly connected to the Spectrum Analyzer and antenna output port as show in the block diagram above. The measurement according to section 10.2 of KDB 558074 D01 15.247 Meas Guidance v05.
(1) The EUT was directly connected to the spectrum analyzer and antenna output port as show in the block diagram above.
(2) Set analyser center frequency to DTS channel center frequency.
(3) Set the span to 1.5 times the DTS bandwidth.
(4) Set the RBW to: 3 kHz
(5) Set the VBW to: 10 kHz
(6) Detector: peak
(7) Sweep time: auto
(8) Allow trace to fully stabilize. Then use the peak marker function to determine the maximum amplitude level. 9.4 EUT Operating Condition The EUT was set to continuously transmitting in each mode and low, Digital photo framesdle and high channel for the test. 9.5 Test Data Please refer to the Attachment F. TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 23 of 75 10. Antenna Requirement 10.1 Standard Requirement 10.1.1 Standard FCC Part 15.203 10.1.2 Requirement An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this Section. The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. 10.2 Antenna Connected Construction The directional gains of the antenna used for transmitting is 3dBi, and the antenna de-signed with permanent attachment and no consideration of replacement. Please see the EUT photo for details. Result The EUT antenna is a Dipole Antenna. It complies with the standard requirement. Antenna Type Permanent attached antenna Unique connector antenna Professional installation antenna TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 24 of 75 Attachment A-- Conducted Emission Test Data 55%
Relative Humidity:
Temperature:
Test Voltage:
Terminal:
Test Mode:
Remark:
25 AC 120V/60Hz Line Charging with TX B Mode 2412Mhz Only worse case is reported Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 25 of 75 Temperature:
Test Voltage:
Terminal:
Test Mode:
Remark:
Relative Humidity:
25 AC 120V/60Hz Neutral Charging with TX B Mode 2412Mhz Only worse case is reported 55%
Emission Level= Read Level+ Correct Factor Remark: All channels have been tested and Shows only the worst channels. TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 26 of 75 Attachment B-- Radiated Emission and Restricted Bands Requirement Test Data 9KHz~30MHz From 9KHz to 30MHz: Conclusion: PASS Note: The amplitude of spurious emissions which are attenuated by more than 20dB Below the permissible value has no need to be reported. 30MHz~1GHz Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Horizontal TX B Mode 2462MHz Below 1GHz test data. This report only shall the worst case mode for TX IEEE 802.11b 2462MHz. TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 27 of 75 55%
Relative Humidity:
25 AC 120V/60HZ Vertical TX B Mode 2462MHz Below 1GHz test data. This report only shall the worst case mode for TX IEEE 802.11b 2462MHz. Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 28 of 75 Above 1GHz Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Horizontal TX B Mode 2412MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 29 of 75 Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Vertical TX B Mode 2412MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 30 of 75 Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Horizontal TX B Mode 2437MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 31 of 75 Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Vertical TX B Mode 2437MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 32 of 75 Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Horizontal TX B Mode 2462MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 33 of 75 Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Vertical TX B Mode 2462MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 34 of 75 Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Horizontal TX G Mode 2412MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 35 of 75 Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Vertical TX G Mode 2412MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 36 of 75 Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Horizontal TX G Mode 2437MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 37 of 75 Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Vertical TX G Mode 2437MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 38 of 75 Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Horizontal TX G Mode 2462MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 39 of 75 Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Vertical TX G Mode 2462MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 40 of 75 Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Horizontal TX N(HT20) Mode 2412MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 41 of 75 Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Vertical TX N(HT20) Mode 2412MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 42 of 75 Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Horizontal TX N(HT20) Mode 2437MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 43 of 75 Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Vertical TX N(HT20) Mode 2437MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 44 of 75 Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Horizontal TX N(HT20) Mode 2462MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 45 of 75 Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Vertical TX N(HT20) Mode 2462MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 46 of 75 Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Horizontal TX N(HT40) Mode 2422MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 47 of 75 Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Vertical TX N(HT40) Mode 2422MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 48 of 75 Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Horizontal TX N(HT40) Mode 2437MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 49 of 75 Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Vertical TX N(HT40) Mode 2437MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 50 of 75 Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Horizontal TX N(HT40) Mode 2452MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 51 of 75 Temperature:
Test Voltage:
Ant. Pol. Test Mode:
Remark:
55%
Relative Humidity:
25 AC 120V/60HZ Vertical TX N(HT40) Mode 2452MHz No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 52 of 75 Attachment C-- Conducted Band Edge Test Relative Humidity:
Temperature:
Test Voltage:
Test Mode:
Remark:
25 AC 120/60Hz TX B Mode 2412MHz / TX B Mode 2462MHz The EUT is programed in continuously transmitting mode 55%
TB-RF-074-1.0 Temperature:
Test Voltage:
Test Mode:
Remark:
Report No.: TB-FCC167484 Page: 53 of 75 Relative Humidity:
25 AC 120/60Hz TX G Mode 2412MHz / TX G Mode 2462MHz The EUT is programed in continuously transmitting mode 55%
TB-RF-074-1.0 Temperature:
Test Voltage:
Test Mode:
Remark:
Report No.: TB-FCC167484 Page: 54 of 75 Relative Humidity:
25 AC 120/60Hz TX N(HT20) Mode 2412MHz / TX N(HT20) Mode 2462MHz The EUT is programed in continuously transmitting mode 55%
TB-RF-074-1.0 Temperature:
Test Voltage:
Test Mode:
Remark:
Report No.: TB-FCC167484 Page: 55 of 75 Relative Humidity:
25 AC 120/60Hz TX N(HT40) Mode 2422MHz / TX N(HT40) Mode 2452MHz The EUT is programed in continuously transmitting mode 55%
TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 56 of 75 Attachment D-- Conducted RF Spurious Emission Test Data Temperature:
Test Voltage:
Test Mode:
Remark:
Relative Humidity:
25 AC 120/60Hz TX B Mode This report only shall the worst case mode for TX IEEE 802.11b. 55%
2412 MHz 0.03GHz-26.5GHz 2437 MHz 0.03GHz-26.5GHz 2462 MHz 0.03GHz-26.5GHz TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 57 of 75 Attachment E-- Bandwidth Test Data Relative Humidity:
55%
Temperature:
Test Voltage:
Test Mode:
Channel frequency 25 AC 120/60Hz TX 802.11B Mode 6dB Bandwidth 99% Bandwidth
(MHz) 2412 2437 2462
(MHz) 9.073 9.034 9.526
(MHz) 13.642 13.649 13.660 802.11B Mode 2412 MHz Limit
(MHz)
>=0.5 TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 58 of 75 802.11B Mode 2437 MHz 802.11B Mode 2462 MHz TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 59 of 75 Relative Humidity:
55%
Temperature:
Test Voltage:
Test Mode:
Channel frequency 25 AC 120/60Hz TX 802.11G Mode
(MHz) 2412 2437 2462 6dB Bandwidth 99% Bandwidth
(MHz) 16.34 16.31 16.33
(MHz) 16.432 16.419 16.425 802.11G Mode 2412 MHz Limit
(MHz)
>=0.5 TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 60 of 75 802.11G Mode 2437 MHz 802.11G Mode 2462 MHz TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 61 of 75 Relative Humidity:
55%
Temperature:
Test Voltage:
Test Mode:
Channel frequency 25 AC 120/60Hz TX 802.11N(HT20) Mode
(MHz) 2412 2437 2462 6dB Bandwidth 99% Bandwidth
(MHz) 17.27 16.91 17.30
(MHz) 17.585 17.596 17.586 802.11N(HT20) Mode 2412 MHz Limit
(MHz)
>=0.5 TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 62 of 75 802.11N(HT20) Mode 2437 MHz 802.11N(HT20) Mode 2462 MHz TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 63 of 75 Temperature:
Test Voltage:
Test Mode:
Channel frequency 25 AC 120/60Hz TX 802.11N(HT40) Mode 6dB Bandwidth 99% Bandwidth Relative Humidity:
55%
(MHz) 2422 2437 2452
(MHz) 35.72 35.91 35.45
(MHz) 36.127 36.135 36.156 802.11N(HT40) Mode 2422 MHz Limit
(MHz)
>=0.5 TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 64 of 75 802.11N(HT40) Mode 2437 MHz 802.11N(HT40) Mode 2452 MHz TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 65 of 75 Attachment F-- Peak Output Power Test Data Test Conditions: Continuous transmitting Mode Temperature:
Test Voltage:
25 AC 120/60Hz Relative Humidity:
55%
Mode 802.11b 802.11g 802.11n
(HT20) 802.11n
(HT40) Channel frequency
(MHz) 2412 2437 2462 2412 2437 2462 2412 2437 2462 2422 2437 2452 Test Result (dBm) Limit (dBm) 15.80 15.36 15.11 14.81 14.54 14.30 14.10 13.39 13.15 12.78 12.65 12.83 30 Result PASS Duty Cycle Mode Channel frequency (MHz) Test Result 802.11b 802.11g 802.11n
(HT20) 802.11n
(HT40) 2412 2437 2462 2412 2437 2462 2412 2437 2462 2422 2437 2452 Please see below plots
>98%
TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 66 of 75 802.11 B Mode 2437 MHz 802.11 G Mode 2437 MHz TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 67 of 75 802.11 N(HT20) Mode 2437 MHz 802.11 N(HT40) Mode 2437 MHz TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 68 of 75 Attachment G-- Power Spectral Density Test Data Temperature:
Test Voltage:
Test Mode:
25 AC 120/60Hz TX 802.11B Mode Relative Humidity:
55%
Channel Frequency
(MHz) 2412 2437 2462 Power Density
(dBm/3kHz)
-8.471
-9.411
-9.532 802.11B Mode 2412 MHz Limit
(dBm/3kHz) 8 TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 69 of 75 802.11B Mode 2437 MHz 802.11B Mode 2462 MHz TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 70 of 75 Temperature:
Test Voltage:
Test Mode:
25 AC 120/60Hz TX 802.11G Mode Temperature:
25 Channel Frequency
(MHz) 2412 2437 2462 Power Density
(dBm/3kHz)
-15.532
-16.644
-16.853 802.11G Mode 2412 MHz Limit
(dBm/3kHz) 8 TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 71 of 75 802.11G Mode 2437 MHz 802.11G Mode 2462 MHz TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 72 of 75 Temperature:
Test Voltage:
Test Mode:
25 AC 120/60Hz TX 802.11N(HT20) Mode Temperature:
25 Channel Frequency
(MHz) 2412 2437 2462 Power Density
(dBm/3kHz)
-15.243
-17.484
-18.016 802.11N(HT20) Mode 2412 MHz Limit
(dBm/3kHz) 8 TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 73 of 75 802.11N(HT20) Mode 2437 MHz 802.11N(HT20) Mode 2462 MHz TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 74 of 75 Temperature:
Test Voltage:
Test Mode:
25 AC 120/60Hz TX 802.11N(HT40) Mode Temperature:
25 Channel Frequency
(MHz) 2422 2437 2452 Power Density
(dBm/3kHz)
-21.237
-21.902
-20.867 802.11N(HT40) Mode 2422 MHz Limit
(dBm/3kHz) 8 TB-RF-074-1.0 Report No.: TB-FCC167484 Page: 75 of 75 802.11N(HT40) Mode 2437 MHz 802.11N(HT40) Mode 2452 MHz
-----END OF REPORT-----
TB-RF-074-1.0
1 | RF Test set-up photo | Test Setup Photos | 1.51 MiB | May 08 2019 |
Page: 11 of 12 Appendix EUT Test Photographs 15C Test Setup Model: ZS-GX5 Photo of Setup for Radiated Emission (Above 1 GHz) Photo of Setup for Radiated Emission (Below 1 GHz) TB-RF-074-1.0 Page: 12 of 12 Photo of Setup for Conducted Emission
-----END OF REPORT-----
TB-RF-074-1.0
1 | WIFI Channel 12&13 Description letter | Cover Letter(s) | 118.93 KiB | May 08 2019 |
WIFI Channel 12 and 13 Declaration Letter Reason for Amendment Initial Release (current) Modify the select options Revision History From 0.0 1.0 To 1.0 2.0 Approved Date December 22, 2015 Sep-23-2016 SCSF190WiFiChannel12&13DeclarationLetter CreatedbyWilliamGraff Page1of2 Rev.2.0 ApprovedbyBaoThuongNguyen ShenzhenCTVvideointelligenceCo.,Ltd WIFI Channel 12 and 13Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: 2AT5D-ZS-GX5 Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However,all the operated channels cant be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note:
1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following:
Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Name / Title: Guangqing Liu / CEO Signature:
Phone: +86 15814636688 Email: zs@ctvzn.com Date: 2019-08-05 SCSF190WiFiChannel12&13DeclarationLetter CreatedbyWilliamGraff Page2of2 Rev.2.0 ApprovedbyBaoThuongNguyen
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-08-05 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2019-08-05
|
||||
1 | Applicant's complete, legal business name |
Shenzhen CTV video intelligence Co.,Ltd
|
||||
1 | FCC Registration Number (FRN) |
0028680502
|
||||
1 | Physical Address |
6F,P building,Weikangde Industrial Park
|
||||
1 |
Shenzhen
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@siemic.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AT5D
|
||||
1 | Equipment Product Code |
ZS-GX5
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
L******** g******
|
||||
1 | Title |
CEO
|
||||
1 | Telephone Number |
+86 1********
|
||||
1 | Fax Number |
+86 0********
|
||||
1 |
z******@ctvzn.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Smart WIFI Camera with Battery | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is the maximum conducted output power. Device contains 20 and 40 MHz signal bandwidth. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Shenzhen Toby Technology Co., Ltd.
|
||||
1 | Name |
R**** L****
|
||||
1 | Telephone Number |
---********
|
||||
1 |
t******@tongbiao.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0380200 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC