INTRODUCTION Thank you for purchasing our newest DECT single model, the manual is designed to familiarize you with this phone. To get the maximum use from the phone, we suggest that you read this instruction manual carefully before using. Important Notices:
1) Please charge the battery for at least 12 hours before using. You hear a beep when the handset is correctly in position on the charging cradle. 2) To keep the batteries charged, whenever you dont need to use the handset (such as overnight, or when you go out), leave the handset on the charge cradle. 3) When the unit is powered on initially, the date and time will be blinking, please to set the date and time first according to use the method of DATE and TIME. SAFETY INSTRUCTION When using your telephone equipment, the following basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons:
Read, understand and follow all warnings and instructions Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a soft damp cloth for cleaning. Do not place this product on unstable surfaces. The product may drop, causing serious damage to the product. Do not overload wall outlets and extension cords as this can result in fire or electric shock. Never push foreign objects of any kind into this product through cabinet slots as they may affect dangerous voltage points or short circuit parts that could result in fire or electric shock. Never spill liquid of any kind on the product. Avoid moving or disconnecting this unit during a heavy storm, as there may be a remote risk of electric shock from lightning and thunder. IMPORTANT The base unit must be used with the mains adapter supplied with the unit. Using any other adapter will may invalidate any approval given to this apparatus. Unprofessional person cannot open the telephone even meets troubles, please send to service center. FEATURES LCD 3 lines display Maximum 5 handsets can be registered to the same base unit, and maximum 4 bases per handset 16 kinds of interface languages: Portuguese, Spanish, English, French, German, Italian, Dutch, Hungarian, Greek, Polish, Danish, Norwegian, Swedish, Turkish, Russian and Ukrainian Pre-dial and edit function Redial and pause function 30 incoming numbers memories and 10 outgoing numbers memories 50 phone book memories with 12 characters & 20 digits maximum Call transfer to other handset and intercom call between two handsets Conference call between external call and two handsets 10 ringing tones for selection Ringing tone/earpiece/hands-free volume adjustable 1 Different melody for different call available Alarm clock function Tone/Pulse dialing mode can be set Flash time 100/300/600/1000ms for selection LCD backlight function Auto/manual answering function Dialing barring function Keypad lock function Mute function LCD DISPLAY/LCD MAP/KEY PAD DESCRIPTION In use and charge LED indicator Icon Description Function The antenna icon will always be shown on the LCD, it indicates for signal strength, flashes when the handset is out of range, disappear when registration to base is lost. The icon will be displayed when the user has pressed be displayed when making an external call The alarm icon will be shown as steady on when the alarm is set. The alarm icon will flash when the alarm is triggered. Displayed when external ring set to off key once .The icon will ANTENNA Talk ALARM_IND RING OFF PHONEBOOK Displayed when viewing the phonebook entries. VMWI_IND Displayed when a new voice message is received from the network. NEW CID HANDSFREE The icon will be displayed when a new call comes The icon will be displayed when press key, in idle state. BATTERY_IND Displayed charging indication and indication of the current battery status. Intercom The icon will be displayed when making an internal call 2 Key pad Icon Description Function Definition off hook In standby mode press once to take the handset into off hook mode. hand free MUNE/OK OFF/END Phonebook/BACK
) UP In standby mode press once to take the handset to hand free mode. Entry to the menu functions from idle mode;
Confirming selections & actions. In talk mode press the key to perform mute function. In talk mode, press once to hang up the call;
In standby mode, hold for 3 seconds to power down the handset. This key is used to enter the phonebook both in standby mode and in talk mode. Press to exit present menu Scrolling up through lists and menu options;
Increasing the volume;
Review incoming number, outgoing number and phonebook number. 3
( ) DOWN Scrolling down through lists and menu options;
Decreasing the volume. Review incoming number, outgoing number and phonebook number. Mute In talk mode press the key to perform mute function. FL/CLR Flash/Delete RD/P Redial/Pause keypad lock ring on/off Page Intercom The key is used to delete memory;
Delete the current input by a short pressing during menu edit. In on hook or off hook state, press it to insert a pause time between two digits numbers. Redial the last dialed number. A Long press to activate keypad lock;
To set up a conference call. In addition to its use for text and number entry;
Press and hold to switch the handset external call ring on/off Page the handset. Register the handset to a specified base. To set up an internal call to another handset;
To transfer an incoming call to another handset;
To set up a conference call with an external line and an internal handset. INSTALLATION 1) Plug the main power lead into the bottom of the base unit. 2) Plug the main adapter into mains socket with the switch on the socket set to off. 3) Switch on main power at the socket. 4) Fit the batteries in the handset Note: If you do not modify the password yourself, all the passwords in this manual are default as 0000. Menu Settings During idle state, press item. Press or key to select the above items and then press state, or press Note: The system will time out if you leave more than 30 seconds between key presses. The menu tree as follow:
to back to the previous menu. Details of each item are shown in next parts. key to enter the menu setting, there are five sub-menus under the handset menu key to enter. Press to quit the setting HANDSET MENU TREE CALL LOG PHONE BOOK MISSED RECEIVED DIALED LIST NEW ENTRY EDIT RECORD DEL RECORD DELETE ALL MEM STATUS 4 BS SETTINGS DELETE HS DIAL MODE FLASH TIME MODIFY PIN BS DEFAULT ALARM RING SETUP TONE SETUP HS SETTINGS LANGUAGE HS NAME AUTO ANSWER BARRING DATE&TIME CONTRAST SELECT BASE HS DEFAULT REGISTRATION BASE 1(2,3,4) TONE PULSE 100/300/600/1000MS default 0000 default 0000 ON OFF INT RING EXT RING KEY TONE BATTERY LOW RANGE ALARM ON OFF default 0000 BASE 1,2,3,4 and AUTO default 0000 or key, use or key to choose, press key to dial out the number automatically. key to enter. And there are three items in key, use or key to choose CALL LOG, press key to enter missed call lists, received call lists or dialed call lists. Handset Menu function 1: CALL LOG Press this menu, MISSED, RECEIVED and DIALED. In CALL LOG 1) Press 2) The LCD will show the last record. (If no entries are available in the list, the LCD will be shown EMPTY). 3) Press or key to view other record. press 0 key to check the record time 4) When the desired number is show, press the When the record is show, press 1) ADD TO PB : this function allows the user to add an entry from the caller list to the phone book. 2) DELETE : this function allows the user to delete the currently selected entry from caller list 3) DELETE ALL : this function allows the user to delete all numbers Note: In idle state, press key once to outgoing records or press key to review incoming records. Handset Menu function 2: PHONE BOOK Each individual Handset has its own phonebook, independent of each other handset, with a maximum of 50 entries, each name a maximum of 12 characters, each number a maximum of 20 digits and a melody selected from 1 to 10. Press LIST LCD display LIST. The function allows the user to review the phone book record lists by using the or key. Press 0 key to see the name/number When the desired number is show, press the Shortcut: In the idle mode, press key to enter phone book list conveniently. Press 0 key to see the key. Use or key to select PHONE BOOK. Then press key to dial out the number automatically. key to confirm. key to confirm. or 5 name/number NEW ENTRY Press or key to select NEW ENTRY item. This function allows the user to add an entry to the phone book. key to enter, the cursor for the name flashes. 1) Press 2) Enter the name using the alphanumeric keys and press 3) 4) Enter the number and press 5) Press or key to select the melody to be stored and press If you make a mistake, press R/CLR key to correct. key to confirm. key to confirm key to confirm. Input method as follow:
press times key 1 2 3 4 5 6 7 8 9
0
1st A D G J M P T W
space 2n d
B E H K N Q U X 3rd 4th 5th 6th
C F I L O R V Y 0 1 2 3 4 5 6 S 8 Z 7 9 EDIT RECORD Press or key to select EDIT RECORD item. This function allows the user to modify a phonebook record. 1) Press 2) Press or key to select the designated record to change. Once a record has been selected, the key to enter, the first record in the phone book will be displayed. user will have the option to edit each of the name/number and change melody. DEL RECORD Press or key to select DEL RECORD item. This function allows the user to delete a phonebook entry. DELETE ALL Press or key to select DELETE ALL item. This function allows the user to delete all phonebook entries. MEM STATUS Press or key to select MEM STATUS item. If show 10/50, it means total 50 records can be stored in the phonebook and 10 records has been stored in it already. Handset Menu function 3: BS SETTINGS The user is able to change the base setting in base settings item, press key and use or key to 6 select this item. Then you can do below:
DELETE HANDSET This function allows the user to delete a handset registration from the baseCannot delete local 1) Press 2) Press 3) 4) Press or key to scroll the handset names list up and down. 5) Press key, the first show is DELETE HS. key to enter, the user will be prompted to enter the PIN code. Input the correct 4-digit pin code using digit key (the default PIN code is 0000. key to confirm. The delete handset will be deleted from the list on registered handset on the base, and the handset will behave according to the out of range condition. key 7 key to confirm your selection. key for 5s, IN USE/CHARGE LED flashes, then press key, then using or key to select DIAL MODE item. key to enter, and the display shows TONE. Note: In idle mode, press and keep times swiftly, the IN USE/CHARGE LED flashes quickly. Then all the handsets logout the base successful till IN USE/CHARGE LED die out. DIAL MODE The user can select to change the mode will dial. 1) Press 2) Press 3) Press or key to select TONE or PULSE dial mode. 4) Press Note: According to your telephone lines or PABX systems you may need to change the dialing mode between Tone and Pulse. FLASH TIME The user can select the flash time (100ms, 300ms, 600ms and 1000ms) to meet your telephone line or PABX requirement. 1) Press 2) Press 3) Press or key to select the desired flash time among 100ms, 300ms, 600ms and 1000 ms. 4) Press MODIFY PIN Some functions (including handset delete and base default) require a PIN code. The default PIN is 0000, but you are able to change to your personal 4-digit PIN. 1) Press 2) Press 3) Entry the existing PIN code for the base and handset by using numerical keys (the default PIN code is key to confirm. Then using or key to select MODIFY PIN item. key to confirm, and the display shows PIN?
key, then using or key to select FLASH TIME item. key to enter. key to confirm your selection. 4) to confirm. 0000), then press If the old code is validated, the display shows NEW PIN, enter a new PIN code (4 digits), press confirm. to to confirm, the code will be stored and a tone sounded. 5) The display shows REPEAT, input the new PIN code again. 6) Press BASE DEFAULT This function allows the user to restore the base setting to the factory default. 1) Press key, then using or key to select BS DEFAULT item. 7 2) Press 3) The user will be prompted to enter the PIN code, the display shows PIN?, then press numerical keys to key to confirm. input code (default as 0000). 4) Press key to confirm. If the PIN code is validated all base settings will be returned to the factory default. Handset Menu function 4: HS SETTINGS The user is able to change a number of the settings for the handset to their own individual preferences. Press key and use or key to select HS SETTINGS. Then you can do below:
ALARM The user can set the alarm on the handset and adjust the alarm settings, to give an alert at a programmed time of every day. 1) Press 2) Press 3) Press or key to select ON or OFF, press key, the first sub-menu is ALARM item. key to confirm. key to confirm. Selection of OFF will turn the alarm off, and the user is dropped back to the ALARM menu surface, selection of ON option will turn the alarm on, then the user will be requested to set the alarm time. 4) After select ON, press 5) Press or key to change the hours, press key to start the time settings of alarm, 12-00 displayed with 12 is blinking. key to confirm, use the same method to select minutes. 6) After select the alarm time, press key, the user will be presented with a further option to select to ON or OFF to enable or disable the snooze function on the alarm. 7) Press 8) When the alarm is set, the key to confirm your selection. will appear on the top of the display Startup alarm:
In idle state, the alarm will ring at very sharp time you have set. Intermit alarm:
During the alarming, you can switch it off by pressing any key of the handset, or when a call comes, the alarm will be intermitted too. Close alarm:
Re-enter the alarm setting menu option and select OFF. Notes:
1) If the SNOOZE is set ON, the alarm will be repeated about every 5 minutes for about nine times, with the alarm icon continuing to flash. During the alarming, press any key except and will begin to ring after 5 minutes. If the SNOOZE is set OFF, the alarm will sound for 45 seconds once. 2) RING SETUP The user is able to change the handset ringing on internal calls and external calls. There are 10 ringer melodies and 5 different volume levels can be set. 1) Press 2) Press 3) Press or key to select the INT RING and EXT RING setup. key, then using or key to select RING SETUP item. key to enter. key to intermit alarming, 8 4) Press 5) Press or key to select the MELODY and VOLUME setup. key to confirm. If select MELODY, a) Press b) Press or key to select desired melody, the corresponding melody sound can be heard key to confirm. with the selection. c) Press key to confirm your selection. If select VOLUME, a) Press b) Press or key to select desired ringer volume 1- 5, the corresponding volume sound can key to confirm. be heard, if you want to switch off select OFF. c) Press key to confirm your selection. Notes:
1) 2) If you select ring OFF for INT RING, when transfer call to this unit, it will not ring;
If you select ring OFF for EXT RING, there will be a ringing off icon is an incoming call, the handset will not ring.(Shortcut key: press and hold handset external call ring on/off). display on LCD and when there key to switch the key to confirm. key, then using or key to select TONE SETUP item. key to enter. TONE SETUP The user is able to change the handset tone settings. 1) Press 2) Press 3) Press or key to select the KEY TONE and BATTERY LOW, RANGE ALARM setup. 4) Press 5) Press or key to select the ON or OFF to enable/disable the sounding of a beep respectively. 6) Press Notes:
1) 2) 3) If you turn the tone on for key tone, a beep for key tone will sound when a key is pressed on the handset. If you turn the tone on for battery low warning, a beep will sound when the battery is low. If you turn the tone on for the out of range warning, a beep will sound when the handset goes out of range of the base unit. key to confirm your selection. key, then using or key to select LANGUAGE item. key to enter. LANGUAGE 1) Press 2) Press 3) Press or key to select the language from ENGLISH (English), DEUTSCH (German), FRANAIS
(French), ITALIANO (Italian), ESPAOL (Spanish), PORTUGUES (Portuguese), PYCCKN (Russian), TRKE (Turkish), EHNIKA (Greek), YKPAIHCKN (Ukrainian), POLSKI (Polish), MAGYAR
(Hungarian), SVENSKA (Swedish), NEDERLANDS (Dutch), DANSK (Danish) and NORSK (Norwegian). Each language will display in its own native translation. key to confirm your selection. 4) Press HANDSET NAME The operation will allow the user to change the handset name 9 key to confirm. If you make a mistake, press R/CLR key to correct. key. Using or key to select HS NAME key, and the display will show a flashing cursor on the name line. 1) Press 2) Press 3) Key in the handset name. 4) 5) Press AUTO ANSWER The Handset can be set to answer an incoming call automatically by simply pick it up from the charging cradle. The user is able to select to enable/disable this auto answer feature. 1) Press 2) Press 3) Press or key to select ON or OFF 4) Press key. Using or key to select AUTO ANSWER key to enter. key to confirm your selection. Exit from this sub-menu and return the user to the AUTO ANSWER BARRING The handset can be set to disable 5 groups outgoing calls. The user is able to select to enable/disable this feature. But the internal calls to intercom or conference will still be available. 1) Press 2) Press 3) Press 4) 5) Then press key. Using or key to select BARRING, key the user will be prompted to enter the PIN code, input 4-digit code (defaulted as 0000). key to confirm, then using or key to select ON or OFF, press to confirm, using the numerical key to input number (maximum 4 digits) which you want to barring. (For example: if you set barring number is 1234, then the numbers begin with 1234 will be not allowed to be dialed out, and LCD display CALLS BARRED.) If select ON, the display shows NUMBER 1, press or to choose NUMBER i(i=1~4). key to confirm. key to confirm. Repeat the above steps to set the rest of 3 groups. key. Using or key to select DATE&TIME key and the last two digits of the year flashes. 6) Press DATE & TIME The user is able to set the date and time on the handset, by selecting the following option. 1) Press 2) Press 3) Edit the year by pressing or key. Then use 4) Using the same method for month, date and time setting. Notes:
1) The date and time will be automatically set when the caller ID message is received in FSK. 2) When the unit is powered on initially, the date and time will be blinking, please to set the date and time key to confirm and enter the month value setting. first according to use above methods. CONTRAST The user is able to set the contrast of the LCD display, by selecting the following options. 1) Press 2) Press 3) Press SELECT BASE The handset can be registered to more than one base (up to a maximum of 4), and you can select which key to enter LCD display contrast settings. key. Using or key to select CONTRAST, key to confirm, then press or key to select from 1-8 levels. 10 base you want the handset to operate with. 1) Press 2) Press 3) Press or to select base (BASE 1~4) or AUTO.(Note: the handset will only link with base number key, then using or key to choose SELECT BASE. key and the LCD displays BASE 1 + . followed by a +) to begin searching, if you hear a sound of di-du-di, means linked successful. 4) Press Note: If you select AUTO, the handset will link with the first of the registered bases that it finds. HANDSET DEFAULT :
This function allows the user to restore the handset setting to the factory default 1) Press 2) Press 3) The display shows PIN?, then key in the PIN code (default 0000). 4) Press key, then using or key to select HS DEFAULT item. key to confirm. key to confirm. If the PIN code is validated all handset settings will be returned to the factory default. Handset Menu function 5: REGISTRATION Maximum 5 handsets can be linked to the same base unit by the follow ways, Maximum 4 bases can be linked to the same handset by the follow ways:
1) 2) Press 3) Press In standby mode, press key to enter, Press or key to select BASE from BASE1, BASE2, BASE3 or BASE4. key to confirm, LCD displays PIN?, then enter the pin code (defaulted as 0000, if input wrong key, then using or key to select REGISTERATION item. number, press R/CLR to delete ). 4) When finished, press key to confirm. LCD display SEARCHING, then press BASE and hold key until you has get DI-DU-DU- sound. The handset and base have registration successfully. Notes:
1) 2) You can repeat the above steps to register another handset for the same base, and the successfully If the handset and base is fail to registration successfully, the handset will return to the standby mode. registered handset will display HS2 or HS3 on the LCD according to the registration sequence. key to page the handset when difficult to look for. key once to obtain a dial tone, dial your number, when you hear the called party answers the 3) Press ADVANCED OPERATION Speakerphone operation & volume control Press phone. You can also answer an incoming call by pressing the During the speakerphone operation, the user can adjust the speaker volume level by pressing the or key. Total 5 levels for selection. Note: If you press total 5 levels for selection. Mute the mouthpiece During a call, press again to get back to the call and the MUTE will disappear. Caller ID type I & II key to use earpiece, you can press the or key to adjust the earpiece volume, key once to mute the mouthpiece and MUTE will show on LCD. Press key once. key 11 TYPE I After you have applied the caller ID service, you can see the caller party phone number during an incoming ring. TYPE II During the conversation, the phone number of the incoming call of the third party can be seen in the unit. This function can be worked when the user applied the Telecom service. Flash The flash function of FL/CLR key can support some special network service, such as call waiting, call transfer, etc. These services require a subscription and the operations depend on the different exchanger. Pause Press RD/P key will insert a 3.6 seconds pause time between two digit numbers. Pre-dialing The unit has pre-dialing function, when you may enter and edit the number before dial it out. The following procedure describes how to use this function:
1) In idle mode, enter the number you want to dial. During entering, you can press R/CLR key to correct the number. key or key for about 2 seconds. key once, the unit will dial out the number show on the LCD. key, press RD/P key, the last dialed number will be dialed again. 2) Press Redial function key or In idle state, press To Lock/Unlock the keypad To lock the keypad Press and hold the You will hear a beep tone, while the keypad is locked, any key you press is invalid. To unlock the keypad Press and hold the You will hear a beep tone, the handset will be unlocked and it will go back to idle mode. MULTI-HANDSET OPERATION Maximum 5 handsets can be linked to the same base unit. Maximum 4 bases can be linked to the same handset. If you have two handsets registered with one base, operation it by the follow ways:
The intercom feature is activated by pressing the 1) 2) The destination handset will ring, press key to enter conversation mode. To end intercom key for about 2 seconds. In idle mode, press key once. Intercom key. or mode, either handset can hang up the call by press key. Call transfer During a call, its to transfer the call to another handset. 1) During a phone call, press 2) Press 3) The two internal handsets will be connected. To complete the transfer of the call, the initiating handset key once. The destination handset will ring. key of the other handset to accept the call. or should be placed on the cradle and the external call will now be connected to the second handset. 12 Three-way conference call 1) When a call comes, Press (HS1) 2) Then press (HS1) 3) Press (HS2) or 4) Press (HS1) then the 5) Press or key key once. The destination handset will ring. key to accept call. key then you can talk all together. to quit the three-way conference mode, then other parties can also continue to communication. Intercom If you have more than two handsets registered with one base, operation it by the follow ways:
The intercom feature is activated by pressing the 1) 2) The user will be prompted to select the number of the internal handset with which you wish to connect. 3) The destination handset will ring, press key to enter conversation mode. To end intercom In idle mode, press key once. key. or mode, either handset can hang up the call by press key. Call transfer During a call, its to transfer the call to another handset. 1) During a phone call, press key once, you will be prompted to select the number of the internal handset with which they wish to connect. 2) The destination handset will ring. With the melody defined for an internal call. 3) Press 4) The two internal handsets will be connected. To complete the transfer of the call, the initiating handset key of the other handset to accept the call. or should be placed on the cradle and the external call will now be connected to the second handset. or key key once, you will be prompted to select the number of the internal handset with Three-way conference call 1) When a call comes, Press (HS1) 2) Then press (HS1) which you wish to connect. 3) The destination handset will ring. 4) Press (HS2) or 5) Press (HS1) then the 6) Press key to accept call. key then you can talk all together. to quit the three-way conference mode, then other parties can also continue to communication. Note: Due to continuous product development, all features and specifications are subject to change without prior notice. TROUBLE SHOOTING No signal bar is displayed on the screen The handset is out of range. Move it closer to the base station No dialing tone Check your phone connections The handset is out of range. Move it closer to the base station No docking tone The handset is not placed properly on the base station/ charger 13 The charging contacts are dirty. Disconnect the power adaptor first and clean the contact with proper damp cloth. The handset on the charger does not charge Make sure the batteries are inserted correctly. Make sure the handset is placed properly on the base station/ charger Batteries are defective. Purchase new ones for replace. No display Make sure the batteries are charged Make sure there is power and the phone is connected The handset no ring Make sure the handset ring tone is turned on. Ring volume too low Check if the ringing volume is set improper, reset it. Receive only Check if P/T mode is properly set. Check if you have set the barring number, if you want dial out this number, reset the barring number. The base can not page the handset Repeat the registration operations to register the base and handset again. Most of the functions failed Check if the batteries are strong enough, charge the batteries. Note: Due to continuous product development, all features and specifications are subject to change without prior notice. If batteries are OK, remove the battery, unplug the lines and reinstall after 10 minutes. 14 FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Exposure to Radio Frequency (RF) Signals For handset:
This is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by both U.S. and international standards bodies. These standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This product has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in FCC/OET Bulletin 65 Supplement C (2001) and IEEE 1528. For Base:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 15