Oladance OWS C1 List of items earphone x 1 Quick Guide x 1 charging case x 1 Type-C cable x 1 Product introduction Power button Pressure/slide touch buttons Charging indicator Bluetooth LED display light
*To re-pair, press the charging case button shortly, The headset will re-enter auto-pairing mode at the Type-C interface Multipoint connection Device 1 Device 2 Enable multipoint connection: After the first device is connected, press and hold the buttons of both earphones at the same time for 2 seconds, and after hearing the tone, the headset enters pairing mode again, and the second device can search for the headset and connect. Disconnect multipoint connection: When the headset has been connected to 2 devices, press and hold the buttons of both headsets at the same time for 2 seconds, and disconnect all Bluetooth devices and enter pairing mode after hearing the tone. Operation temperature: 0~45C Input: 5.0V 1A Product name Product model Bluetooth protocol Working frequency Oladance OWS C1 OLA07 HFP/A2DP/AVRCP/HSP 2402-2480MHz Disposal and Recycling Information This symbol (with or without a solid bar) on the device, batteries (included), and / or the packaging, indicates that the device and its electrical accessories (for example, a headset, adapter or cable) and batteries should not be disposed of as household garbage. Battery warning The built-in lithium battery of the product is forbidden to be disassembled, impacted, extruded or put into re. The battery under the very low air pressure may result in explosion or ammable liquid or gas leakage. Avoid the battery in a high-temperature environment or being exposed to strong sunlight to avert explosion. Don't use the battery continuously in case of serious ballooning. The battery shall be handled pursuant to the local regulations and shall not be disposed as household garbage. Don't try to repair, remove or ret the battery. The explosion may happen if the battery is replaced by the one subject to incorrect model. Don't compress or puncture the battery with hard object. The battery leakage, overheating or outbreak of a re may occur if the battery is destroyed. Declaration of Conformity:
Hereby, Shenzhen Dancing Future Technology Ltd., declares that this device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
http://oladance.com SAR: RF exposure information: The EIRP power of the device at maximal case is below the exempt condition, 20mW specied in EN 62479: 2010. RF exposure assessment has been performed to prove that this unit will not generate the harmful EM emission above the reference level as specied in EC Council Recommendation
(1999/519/EC). FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help important announcement. RF Exposure The portable device is designed to meet the requirements for exposure to radio waves established by the FCC RF exposure guidelines. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value is measured at a distance of 0mm between the radiator and the Head. The highest reported Head SAR value: 0.48W/kg. RF Exposure The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value is measured at a distance of 0mm between the radiator and the Head. The highest reported Head SAR value: 0.48W/kg. FCC ID2A9AR-OLA07L FCC ID2A9AR-OLA07R IC29727-OLA07L IC29727-OLA07R HVIN:OLA07L HVIN:OLA07R 201-230366 Important Note:
Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Warning:
1. Dont place the product into a liquid environment or avoid the product exposed to high humidity 2. Avoid extrusion to avert the damage to the product 3. Dont attempt to dismantle the product. Put the product in a cool and dry place to keep it dry if stored for a long time 4. Avoid touching the strong magnet to prevent the magnetic headset from being demagnetized. 5. Avoid the dusty, wet and dirty environment where the electronic circuit of the equipment may be damaged if being used. 6. Dont Use the equipment at the moment of thunderstorm because the thunderstorm may incur equipment fault or shock hazard. 7. Dont use the equipment when riding a motorcycle or a bicycle,driving a car or crossing the road to ensure your safety. 8. Keep the equipment out of reach of children or pets to avert the damage. 9. Dont wash the equipment with chemical cleanser or strong detergent Dont Listen to the voice under high sound pressure and high volume for a long time to prevent the possible hearing impairment when the headset is used.
-English:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference.
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
- French:"
Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."
How to wear the headphones correctly 1 3 2 4 Description of the LEDs Flashing white light: Bluetooth pairing/connecting Solid white light: Bluetooth connection successful Flashing red: Headphones are less than 5% battery Solid red light: Headphones charging White light flashes alternately red: headphones on/off The indicator light is off: Charging of the earbuds is complete Blinking white: The headphones are charging The indicator light is off: Charging of the earbuds is complete Sound For Comfort