Q10 Instruction Manual Product Specification:
Main parameter:
Bluetooth version: V5.0 Bluetooth Profiles: A2DP,HFP.HSP output power: 2W Body: Refined ABS Bass Diaphragmr: Yes Waterproof Rating: IPX5 Handsfree: Yes Connectivity: Bluetooth&Handsfree Charging: Micro-USB Noise Cancellation: Yes frequency response: 200hz-18khz power supply: USB, DC 5V distortion: 1%
S / N: 84dB2dB battery capacity: 400mAh/3.7V or 1200mAh/3.7V battery working time: 2.5-7 hours (play as the max Volume) battery charging time: 2.5-7 hours sizeL162*w41* h82mm N.W.: 262g Packing Contents:
1the blue-tooth speaker 2users manual 3USB charging cable Charging the Speaker:
Before using the speaker for the first time, charging it for at least 0.5 hours. 1Plug the USB cable into the port on the speaker, plug the other end into the USB port on the adapter (DC 5V). 2Red LED will turn on to indicate that the unit is charging. 3Red LED will turn off when fully charged. Start-up& Shutdown Functions:
1Long press POWER to start the blue-tooth speaker. 2Blue LED flashes, waiting for pairing 3Long press POWER to shutdown the blue-tooth speaker. 4LED off if shutdown the speaker. Pairing the Device:
1Place the speaker near the Blue-tooth-enabled device. 2Long press POWER to start the blue-tooth speaker, blue LED flashes, the speaker is now in pairing mode.Follow the instructions of your device to search for the speaker. 2The speaker is called Q10, enter the PIN0000 if need. 3Blue LED light, the completion of the pairing, while the voice prompts. The speaker is in the state of pairing the last device default in the first 3 seconds after starting. If failing to pair, the speaker will be in state of pairing automatically. LED Indicator 1Charging: Red LED on 2Fully charged: Red LED off 3Pairing Mode: Blue LED flashes. 4Connected: Blue LED slow flashes Safety and General Information:
1Do not expose the device to water or attempt to disassemble the device. If the device is exposed to water or disassembled, the user may be risking an electronic short. 2Do not use this products in an aircraft or in hospital. 3Do not expose the device to direct sunlight, heat and flame. 4Device may be warm while charging. It is normal. 5Changes or modifications to this equipment not expressly approved by the party responsible for compliance could avoid the users authority to operate the equipment. Keys Sketch Map:
Functions:
1 Power Long press POWER to start or off. 2Play/Pause/Bluetooth Connection Button
*When playing music, press the button to pause or play.
*When you receive a call, press the button to answer. When the call ends, music will resume playing. 3-
*Long press to skip to previous track
*Quick press to decrease volume 4+
*Long press to skip to next track
*Quick press to increase volume 5Microphone 6RESET 7Micro USB: Use a computer USB port/AC power adapter with USB 8LED Red/Blue FCC Warning Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference th at may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposur e condition without restriction.