FCC ID: 2A4UJDW01 Speaker

Instructions for Warranty that 1 4 Decorative antenna (rotatable) The knob switch MIC receives the hole Bluetooth indicator Mirco USB charging port Hang rope hole 1. The after-sales service of the product shall be performed in accordance with the "three guarantees" provisions of national laws and regulations, and the warranty period of the product is 6 months. In the limited period of "three guarantees" of the product, the failure occurred when the product is applied to the normal state can be according to the "three guarantees" provisions To repair, replace, return. In the product warranty period, according to the warranty content, send back to the after-sales department to enjoy free Maintenance service. 2. Within the warranty period (including the validity period of "three guarantees"), paid maintenance services will be provided for the following conditions, and "three guarantees"

will not be provided. Services:

-cannot sell the original valid warranty card of this product;

-failure or damage caused by force majeure or in the process of transportation or unloading;

- failure caused by failure to operate in accordance with the instructions or instructions on the explosion;

- failure caused by using parts or accessories not included in the package of this product;

- man-made damage to the appearance of parts;

Date of purchase: year month day Telephone number (contact information) :

CERTIFICATION MANUFACTOUE DATE QC QC001 Use the knob switch to turn the machine on clockwise according to the left picture. Counterclockwise shutdown Adjust the volume by rotating clockwise Buyer's name (or taobao ID) :

Buyer's address:

Bluetooth indicator flashes (the bluetooth indicator lights up after connection) Red light is displayed when charging, full light is off

(charging time: 3 hours) Working time under full power: 8-9 hours Note: do not rotate or pull the decorative antenna to avoid breakage Please keep it as proof of warranty The manufacturer reserves the right of final interpretation Product model DW01 Power input Micro USB Rated voltage DC 5 v Rated power 3 w Battery capacity 900 mah Product weight 172 g Product size 75 x38x52mm Manufacturer Company address:

Production address: yinfeng industrial park, hangcheng avenue, gushu, hangcheng street, baoan district, shenzhen M a d e l n C h i n a Bluetooth name: DW01 5 4 4 2 4 1 3 4 2 5 2 1 3 4 2 2 5 5 1 1 6 3 6 6 3 6 1.6 2.

MIC Mirco USB 1 4

: DW01

I D CERTIFICATION MANUFACTOUE DATE QC QC001 2 4 4 4 3 8 - 9 D W 0 1 M i c r o U S B D C 5 V 3 W 9 0 0 m A h 1 7 2 g 7 5 x 3 8 x 5 2 m m M a d e l n C h i n a This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be u sed in portable exposure condition without restriction FCC ID: 2A4UJDW01

C5266091_X10_Ed.2 Shenzhen Dehuashichuang Technology Co.,LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date:

2022.03.05 Subject: Request for Confidentiality FCC ID: 2A4UJDW01 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No NOTE 1 NOTE 1 No No Short-Term Confidentiality NOTE 2 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, 1/1 C5266091_X10_Ed.2 Signature:

Name: Jason He Title: General manager 1/1

C5266091_X8_Ed.1 Letter of Authorization Shenzhen Dehuashichuang Technology Co.,LTD Company: Shenzhen Dehuashichuang Technology Co.,LTD Address: Room 1079, East 10th Floor, Building 4, SEG Technology Park,Futian District, Shenzhen Product Name: Speaker Model Number: DW01DW09DW 13 B6 B9 P8 A18 P8 FCC Identifier: 2A4UJDW01 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Jason He Title: General manager Date: 2022.03.05 Signature of applicant:

1/1

Shenzhen Dehuashichuang Technology Co.,LTD Model Difference Product description: Speaker Model name: DW01, DW09, DW13, B6, B9, P8, A18, P8 Trade Name: Aresrora FCC ID: 2A4UJDW01 All the model are the same circuit and RF module, only for model name. Regards Sincerely Clients signature:

Clients name / title : Jason he (CEO) Contact information / address: Room 1079, East 10th Floor, Building 4, SEG Technology Park,Futian District, Shenzhen