2. Touch to use 3.Status mode Status details mode 5.2. Sports underway mode 2)If the Sports time is more than 1 minute, it will display the prompt of Sports end 3) Reminder of force exiting from Sports mode due to low battery 6.Stopwatch mode 8.Do Not Disturb mode 11.2. Message reminder 11.6. Low battery reminder 12.3 Unbinding results Declaration of toxic and hazardous substances in electronic information products FAQ Smart Bracelet Setting Use VeryFitPro on iOs or Android smart phone to set the wristband as follows:
Note: hardware and system of devices should meet the requirements:
Product introduction The product must be activated by charging before initial use, and then charge the product to ensure normal power supply. The hand ring will automatically power on. Remove the bracelet body and wrist strap iOS8.0& Above Android4.4 & Above Support Bluetooth4.0 Insert the main body of the wristband into the USB interface for charging activation (comply with the required voltage and current:
5V / 500mA) 1Download VeryFitPro 1. Search and download Search and download VeryFitPro from the Apple Store or Android App store . 2. Scan the QR code and download It probably has a problem to open the link with WeChat or other scan tools, please copy the link and open it through browser. Mount the bracelet body into the slot of the wrist strap. Adjust the length of the wrist strap until it is appropriate to wear on the wirst. ID132Color HR Thanks for choosing our device, please read the user guide carefully before using
[Click the touch button]: switch the same-level interfaces: in the main interface and sub-interfaces, click to switch and view the same-level interfaces
[Hold the touch button for 2s]: switch the upper/lower interface: nter the sub-interface/return to the upper interface 3. open app VeryFitPro, and pair the device Add Device Detection failed,please re search ID132Color HR Make sure the Bluetooth of smart phone is ON, open app VeryFitPro.When selecting the right band from the search list, please slide the screen of wristband to wake up the device and then complete connecting. Function Introduction 1. Interface description Note: [Click the touch button] display in sequence Time mode Status mode Heart rate monitoring mode Sports mode
[Hold the touch button for 2s]
Note: [Click the touch button]
enter Sports data display mode Note: When it monitors low battery during sports, it will end sports and enter this mode. Stopwatch mode Information mode Do not disturb mode Music control mode Note: Music control mode is closed, and functions will be displayed after they are turned on in APP. 2.Time mode Kcal,Step Active Distance, active time Total sleep, deep sleep Sports heart rate Step Step frequency Stride KCAL 3)Sports data display mode:
Note: in State details mode, [Click the touch button] to enter the next details mode, and click the touch button in the last interface of State details mode to return to State mode 4.Heart rate monitoring mode 4) Reminder of inaccessible sport mode for low-battery Stopwatch ready timing mode Hold the touch button for 2s Click the touch button
[Hold the touch button for 2s]
[Hold the touch button for 2s]
[Hold the touch button for 2s]
(3 kinds of dials, which can be set in APP) Note:
1. After the user sets the alarm in the APP, it will display in Alarm on mode. When there is no alarm, hold Time mode for 2s to enter Alarm off interface. 2. In Alarm on mode, [Click the touch button] to enter the next alarm and click the last alarm to return to Time mode, the order of alarms on the wristband is according to the order of App. 3. In Alarm off mode, [Hold the touch button for 2s] to turn on all alarms and enter Alarm on mode. Resting heart rate mode Note: in Resting heart rate mode, [Hold the touch button for 2s] to return to Heart rate monitoring mode. Entering Resting heart rate mode will not interrupt heart rate monitoring. When returning to Heart rate monitoring mode, it will directly display the heart rate data if it has been detected. 5.Sports mode 5.1. Sports type mode Hold the touch button for 2s Current pace Average pace Current time Music control Distance Note:
1)In Sports type mode, [Click the touch button] to switch to the next sports type (switch cyclically);[Hold the touch button for 2s] return to Sports mode; After 5s of no operation, it will automatically enter Sports underway mode. 2)In Sports underway mode, [Click the touch button] to switch the next Sports underway mode.[Hold the touch button for 2s] enter Sports end mode (Hold in Music control interface to switch to the next music, it will not enter Sports end mode). 5.3. Sports end mode 1) If the Sports time is less than 1 minute, it will prompt the user not to save the data Step, Distance Sports time, KCAL Average pace, Heart rate Note: [Click the touch button] enter the next Sports data display mode, click on the last interface of Sports data display mode and enter Sports mode. 5.5. Sports event reminder 1) Reminder of exiting from Sports mode upon a period of no actions Note: In Sports underway mode, when it monitors that the user remains inactive for a period of time
(15 minutes), it will enter this mode to remind the user 15s before the end. Note: [Click the touch button] enter Sports mode
(without displaying the Sports end data view interface) Note: The sports mode can last up to 6 hours. When the memory is full, this mode will pop up to prompt the user. 2) Reminder of force exiting from Sports mode due to full RAM 2. [Click the touch button] exit this mode and execute End sports command, and enter the Sports data display mode. Hold the touch button for 2s Note: [Click the touch] view the next page Note: The end condition is [Click the touch button] or the screen is out after 2s of no operation display. Note: The end condition is
[Click the touch button]. The device meets the EU ROHS criterion. Please refer to IEC 62321, EU ROHS Directive 2011/65
/EU and revised directive. 11.3 Alarm clock Low battery reminder Ultra-low battery reminder 11.7 Device abnormality reminder Unbinding successful Unbinding failed Wearing and Maintenance Note: The reminder will occur when a user tries to start the sports with the device in low battery mode. Click the touch button 5.6. Abnormal operations during sports Note: 1. When the App is actively launching a sport, the Bluetooth connection between App and wristband is in the disconnected state, if the wristband needs to operate in a state (Hold to enter End sports), it will enter this reminder mode. Pause stopwatch timing mode (flash dynamic effect) 7.Information mode Stopwatch timing mode 10.Photo mode Hold the touch button for 2s Information details mode Note:
1)[Click the touch button] enter the next page of information (not necessarily the next piece). 2) [Hold the touch button for 2s] return Information mode. Do Not Disturb mode on Do Not Disturb mode off Note:
When Do Not Disturb mode is on, except the alarm clock, other reminders will not be effective: the time period of Do Not Disturb mode can be set in the App. 9. Music control mode Note: [Hold the touch button for 2s]: 1) Switch to the next music; 2) The wristband will display this mode when music control function is turned on in the App and the mobile phone and wristband are connected by Bluetooth. Otherwise, it will hide this mode. Note: [Click the touch button] cancel the reminder 11.4. Long sitting reminder Note: 1) [Click the touch button] [Raise wrist] [Shake]:
take a picture; [Hold the touch button for 2s]: exit the Remote photo mode and return to the previous mode;
2) If the mobile phone and wristband are not connected by Bluetooth, the App initiates remote photo taking, prompting users "Wristband disconnected", the wristband will not enter this mode. Note: [Click the touch button] cancel the reminder 11.5. Sports target completion reminder Enter Photo mode 11.Reminder mode 11.1. Call reminder Note: 1) [Click the touch button] to ignore this reminder and end it. 2) [Hold the touch button for 2s] to refuse to answer the phone and end the reminder;
Note: The end condition is [Click the touch button]. Note:
Status Code:
-01 means the abnormality of acceleration sensor
-02 means the abnormality of heart rate sensor
-03 means the abnormality of touch key IC
-04 means the abnormality of flash 12.Bind/Unbind mode 12.1 Binding Note: When the App selects the device and sends the binding instruction, the wristband will enter this mode. 23/3!Cjoejoh!sftvmut Binding successful Binding failed Note: The end condition is
[Click the touch button]. Basic Specifications Model No.: ID132Color HR Battery Capacity: 90mAh Working Voltage: 3.8V Host weight: 20g Sync: Bluetooth 4.0 Working temperature: 20- 45 Waterproof: IP67 Charging time: 1-2h Working Time: 7days Product frequency band: 2402-2480MHz Maximum transmit power: -4.39dBm Our products are designed for you to wear throughout the day. So please follow a few brief instructions when you are wearing and maintaining your smart devices. To keep your wristband clean and your skin comfortable, we put forward the following tips:
Regularly clean your wrist and the smart wristband, especially after sweating in the exercise or being exposed to substances such as soap or detergent which may attach on the internal side of the wristband. Do not wash the wristband with household cleanser. Please use soapless detergent, rinse thoroughly and wipe with a piece of soft towel or napkin. For spots or stains that are not easy to remove, scrub with alcohol and then follow the above steps. Failed to find the device when pairing. 1. Make sure the Bluetooth of smart phone is ON, and smart phone OS Android 4.4 & Above, iOS 8.0 & Above. 2. Make sure the distance between phone and device is within 0.5meter, device is among the normal Bluetooth communication distance range(within 7meter) after pairing finished. 3. Make sure the device is not under low battery. If there is still a problem after fully charged, please contact us. Failed to connect with Bluetooth occasionally 1.Caused by the abnormality of Bluetooth service when it restarted on the phone. 2.Reboot mobile phone or re-start the Bluetooth service, then it works normal. How to restore factory defaults Make sure the device is connected with smart phone, go in the App, enter device-- more, and choose reboot device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances. 105G 70x120mm