User Guide Smart Bracelet WED 26 09 58 ID128HM Thanks for choosing our device, please read the user guide carefully before using. Use VeryFitPro on iOS or Android smart phone to set the wristband as follows:
Note: hardware and system of devices should meet the requirements:
4 e iOS 7.0 & Above Android4.4 & Above Support Bluetooth4.0 1,Download VeryFitPro Search and download Search and download VeryFitPro from the Apple Store or Android App store .;
Scan the QR code and download It probably has a problem to open the link with WeChat or other scan tools, please copy the link and open it through browser. 01 2. Product activation and installation The product must be activated by charging before initial use, and then charge the product to ensure normal power supply. The hand ring will automatically power on. Take out: Pull open the strap and take out the bracelet body Charge the battery: Insert the chip-mounted end of the bracelet body into the USB interface to activate the product by charging
(be cautious not to reverse the polarity, and comply with the required voltage and current: 5V / 500mA) Installation: Mount the bracelet body into the slot of the wrist strap. Wear on: Adjust the length of the wrist strap until it is appropriate to wear on the wirst. i a 02 3. Touch key Single click the touch key:
Interface switch Press and hold the touch key:
Enter 4, Make sure the Bluetooth of smart phone is ON, open appVeryFitPro When selecting the right band from the search list, please slide the screen of wristband to wake up the device and then complete connecting. Detection failed please re search ee Know your Device 1. Wearing Method Wear the device on your wrist horizontally, about 2cm to carpal,the same method as wearing watches. 2. Heart Rate Monitoring To monitor Heart Rate more accurately, please wear the device on the upper position of your wrist and a bit tighter than usual when you are taking exercise. 3, Heart Rate Monitoring Automatic heart rate Monitoring is ON as default, monitor Heart Rate all the day automatically. 03 4. Working Time Continuously working for 8 days under normal conditions 5. Interface description Time mode -> heart rate mode -> blood pressure mode ->
data mode -> alarm mode -> find my phone -> sports mode. unction introduction 1. Normal mode 2.1Time mode Note: display mode is in the app >device > more to switch between horizontal screen and vertical screen. Click the touch button to enter into the next mode: heart rate mode. 2.2Heart rate mode e Before monitoring 89pm After monitoring Enter into the heart rate monitoring mode. \~ Dynamic display Instruction:: after staying at the heart rate interface for 0.5s, the heart rate was monitored. Before the correct data was moni to red. Aw , After the correct data is monitored, the data is displayed, the heart rate icon beats,
[long press touch button for 2s] invalid. Click the touch button to enter into the next mode: blood pressure test. 04 2.3Blood pressure test 2.3.1Blood pressure monitoring g A BO za qeat After Monitoring Before Monitoring Note: 1. After staying at the blood pressure interface for 0.5s,the blood pressure was monitored. After the correct data was detected, the data was displayed, and the blood pressure icon wouldn't beat when the test was finished, and the blood pressure was no longer monito red. Click the touch button to enter into the next mode: data mode. 2. In order to ensure the accuracy of blood pressure data, please remain calm during the monitoring and sit down if its possible. After calibration, displays that the calibration is completed. 2.3.2 blood pressure calibration. APP launches blood pressure calibration mode, and displays the interface.
(current interface will be off after 5S screen] return to time mode. Note: before using the blood pressure monitoring function, please use the APP for blood pressure calibration. 2.4Data check mode
[long press for 2S] enter into the data check sub-schema
[click] to enter into the alarm mode or find my phone mode or sports mode. 2.4.1 data check sub-schema. Data check-- Distance Mode:
displays the distance and unit of the day's activities. 1 2.00m | [click] to enter into the calories Mode 05 Data view -- calories Mode:
ry 1 93 4 Displays the calories burned for the day. KCAL >! [click] enter into the Activity Time Mode Data check-- Activity Time Mode:
Displays the time duration of the activity KD 1234 uns) oftne cay 2.5Alarm mode After setting the alarm:
Co | 2 . 45 MON | [click] to enter into the next mode (find my fil | phone mode or time mode) 2.6Sports mode x >>> ws >> | | off >
click] to enter into TIME Mode long press the button for 1s] the motor vibrates to enter into sports mode. Note:1. If there are multiple sports modes, click on the touch button to display the next sports mode. 2. Displays up to three kinds of sports through APP configuration, and the "walking" "running" "bike" is displayed by default setting of thefitness tracker. 3. If you want to record the track under sports mode,please use the APP to initiate the sports. Sports mode e 3 ||# 3 ile 3 long press the button for 3s] to enter into the current sports mode 06 Click to enter into the step checking mode. 2.6.1 Sports is in progress mode. C) 12:45.45
@ 12,000. te 1234, Ld 89 nem CA 1989 ence 9 12.00n;
o1 23 12:45 *
vvvvyvy
Current sport stop watch mode. Step mode of current sport Calories mode of current sport. Heart rate mode of current sport.. Current pace mode . Current sport distance mode Current sport time mode. Sport exit mode Click the touch button to enter into the next sport sub-schema Under sport exit mode [long press touch button for 2s] exit from the sports mode. Note: the tracker displays the pace and distance when its connected and synchronized with the app, otherwise it will not display. 1. Click to switch between interfaces in order. During the pause process, there is animation, and the data calculation of all interfaces are at pause. Switch to heart rate interface , the heart rate can be monitored normally. 2.In the exit mode, long press for 2s, motor will vibrate and exit from the sports mode. o7 2.6.2 Exit from sports mode.
2.6.3.1 Exit from the current sports mode
[click] enter into the next mode:
the current running stop watch mode.
[long press the button for 1s]
to exit from the current sports mode. After pressing the button for 1s under the sport exit mode, enter into this mode,the motor vibrates for one time.
> 3 Note: long press the button for 3s, exit from the current sports mode. 1) if the activity time is less than 1 minute, the tracker won't enter into data display mode after the termination of activity. The data will not be saved. 2)lf the activity time is longer than 1 minute, the tracker will display activity termination alert. vb Display current interface Click the touch button to enter into data display mode when the activity is terminated.
[timeout for 2s] enter into data display mode when the activity is terminated. 3) Data display mode when the activity is terminated 12:45.45 % 12,000, 9 12.00; CFV 1989" pace
[click the touch button] to switch displayed data. Note: display time, calories, maximum heart rate, average heart rate, steps, distance, average pace 08 2.6.4Event reminder during activity. as) AN 2)Compulsory exit from sports. mode alert when the memory is full. 1)Exit from sports mode alert when no activity is detected. fs] [zs *
3) Compulsory exit from sports 4)The alert that the battery is too mode alert when the power is low. low to enter into sports mode 2.6.3 Abnormal condition of operation during activity. Under the condition that the APP initiates the activity positively, or when the APP andthe tracker are disconnected, the waiting interface will be displayed:
Waiting alert
(15) (Click the touch button to exit from the waiting alert Note 1. 15s timeout. If the app and ble device are successfully connected in 15s, the activity continues. If there is no successful connection in 15s, the tracker will exit from sports mode. 2.7Camera control mode Means of access: the app sends a fe] command to take a photo , the motor vibrates for one time. Note: 1. Press the button or raise the gesture to trigger to take a photo, after the photo is taken successfully .\
e one
-O- a Termination method: taking photo is cancelled by APP. Return to the previous interface after cancellation. 09 2. 8 reminder mode 2.8.1 call reminder. Abc dbc When there is an incoming phone call, no matter which mode the tracker is under, it will enter compulsorily into the reminder mode. The tracker will return to the previous mode when it exits from this mode. Note: 1. If the content is too much to display on the screen, it will display in a scrolling way. If the content is an unavailable language,only big icon will be displayed.Big ICON & . 2.8.2 information reminder. @ Abcdbc When there is an incoming message, no matter which mode the tracker is under, it will enter compulsorily into the reminder mode. The tracker will return to the previous mode when it exits from this mode. Note: 1. If the content is too much to display on the screen, it will display in a scrolling way. If the content is an unavailable language,only big icon will be displayed @ . 2. SMS/WeChat/QQ/Facebook/WhatsApp/Twitter/sets/
Messenger/LinkedIn/E Mail/Calender / / LINE/VIBER/Skype/KakaoTalk VKontakte has corresponding icons for notification alert. 10 2.8.3 Sedentary reminder. eo FT
#--O 2.8.5 event reminder. a 12:45 em Icon description: wake up:
Take medicine:
Remind method:
after setting the configurations at the APP, when corresponding conditions are reached, the tracker will remind. 2.8.4 anti-loss reminder. Remind method:
after setting the configurations at the APP, when corresponding conditions are reached, the tracker will remind. Remind method:
after setting the configurations at the APP, when corresponding conditions are reached, the tracker will remind TExercise: dh Others: =|
2.8.6 Low battery reminder i) 2.8.7 Target completion reminder
@ 12,000. eee eeeeeee 12,000, 2.8.8 Charging Mode Te) 1 2.9 Upgrade Mode t Upgrade Mode Upgrading 2.10 Device Error Notification x0 Status Code:
-01 means the abnormality of acceleration sensor
-02 means the abnormality of heart rate sensor
-03 means the abnormality of touch key IC
-04 means the abnormality of flash asic Specification Model No.:ID128HM Battery Capacity:45mAh Working Voltage:3.7V Host weight:about 22g Syne:Bluetooth 4.0 Working temperature:-20C to 40C Waterproof: IP67 Working time : 7Days Product frequency band: 2402-2480MHz Maximum transmit power:-1.64dBm 12 Declaration of toxic and hazardous substances in electronic information products The device meets the EU ROHS criterion. Please refer to IEC 62321, EU ROHS Directive 2011/65/EU and revised directive.
@ Failed to find the device when pairing
@ Make sure the Bluetooth of smart phone is ON, and smart phone OS Android 4.4 & Above, iOS 7.0 & Above.
@ Make sure the distance between phone and device is within 0.5meter, device is among the normal Bluetooth communication distance range(within 10meter) after pairing finished.
@ Make sure the device is not under low battery. If there is still a problem after fully charged, please contact us.
@ Failed to connect with Bluetooth occasionally
@ Caused by the abnormality of Bluetooth service when it restarted on the phone.
@ Reboot mobile phone or re-start the Bluetooth service, then it works normal.
@ How to restore factory defaults Make sure the device is connected with smart phone, go in the App, enter device-- System setting, and choose reboot device. 13 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur ina particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances a i. responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances. 14