80x60mm 128G m m 0 8 m m 0 8 60 mm 80x60mm 128G BT13 60 mm True Wireless Earbuds with Bluetooth Speaker 2 in 1 BT13 This product is an in-ear TWS Bluetooth Earbuds+integrated hanging buckle combination speaker, with compact and lightweight ergonomic design and built-in low-power high-performance Bluetooth version 5.3 chip and integrated Bluetooth hanging buckle speaker charging compartment. It can adapt to various modes of listening scenes such as sharing and private. Pocket size with lanyard design, which is light and easy to carry, suitable for outdoor climbing, traveling and strolling. 1. Product Description Bluetooth speaker side 3. Function description 7 9 m m 34mm both ears. Power switch 76mm 2.Technical Parameters Bluetooth name of speaker: BT13 Bluetooth name of earbuds: E8 Bluetooth earbuds side Working current: 100mA Quiescent current: 5UA Bluetooth version: V5.3 SNR: 85db Effective distance: 10 meters Charging port: Type-C Key type: Button Low voltage reminder: Yes Audio range: 100-20Khz Recharging current: 5V 300mA Lanyard Earbuds Speaker specifications: 36 Internal magnetic/3W Earbuds Rechargeable battery specification: 3.7V 400mAH Earbuds battery specification: 3.7V 30mAH Speaker playing time: 3-4hours Single playing time of earbuds: 4-5 hours Support protocol: A2DP 1.0AVRCP1.5AVDTP1.0AVCTP1.4 HFP1.5GAVDP1.0 Tips:
1. Put the earbuds back into the charging case before use, and when take out the earbuds again, L and R earbuds will start pairing automatically. Or press the touch buttons of the L and R earbuds for 3 seconds separately, they will automatically pair after power on. 2. Turn on the Bluetooth of the mobile phone after L and R earbuds pairing successfully. Battery indicator Type-C charging port Brief Introduction of TWS Earbuds Function:
1. When the binaural earbuds are taken out of the charging case, they will automatically complete the pairing with a prompt sound. 2. Then it can be searched and connected by the mobile phone. 3. After the connection is completed, there will be a success tone in 4. At this time, it can be realized through the earbuds touch button. 4.1 Click to pause or playing music. 4.2 Double-click on the L ear to the previous song, and double-click on the R ear to the next song. end the call when in a call. 5. Click to answer the call when there is an incoming call, and click to 6. When put the earbuds back into the charging case, automatically sleep and start charging, the charging light turn to red and will turn off after fully charged. Brief Introduction of speaker function:
Long press the power switch, the speaker can be searched for connection after power on, and it will automatically power off after 5 minutes without connection. Function category Basic Functions Speaker functions Earbuds functions Phone functions Media functions Other functions Function name Operating Speaker power on Long press the Power Switch button for 3 seconds to turn on Speaker power off Speaker connected to Bluetooth Speaker pause/play Long press the Power Switch button for 3 seconds to turn off Turn on the Bluetooth function of the mobile phone to search the Bluetooth name BT13 and connect it successfully without a password. Connected to the equivalent device, short press the Power Switch button to play/pause when playing music. TWS function of speaker In the power-on state, press the Power Switch button twice to start the TWS pairing. Earbuds connected to Bluetooth Turn on the Bluetooth of the mobile phone to search the Bluetooth name E8 and connect it successfully without a password. Earbuds power on Earbuds power off Earbuds pairing Be automatically turn on when open the charging case (The charging case must have electricity) Be automatically turn off when put it back in charging case.Or long press the Power Switch button for 3 seconds to turn off Take it out of the charging case, the L and R ears are automatically paired, and the main ear enters the pairing state with the mobile phone after the pairing is successful. Voice assistant After connecting to Bluetooth, three-click the touch button of either side to wake up the voice assistant. Clear pairing In the state of power on but not connect, 5-click the touch button of either side to clear pairing memories. Answer call In the incoming call state, click L or R ear Hang up call During a call or outgoing call, double-click the L or R ear Refuse call Last song Next song Pause/play Over-distance connection In the incoming call state, long press the L or R ear for 2 seconds without letting go. Double-click the L ear for 2 seconds to switch to the last song Double-click the R ear for 2 seconds to switch to the next song Connected to the equivalent device, press the touch button of L or R ear to play/pause when playing music 1.The L and R ears are connected about 10 seconds after power on, and it will automatically shut down after 5 minutes of power on without connection 2.Default main and auxiliary ear randomly after power on 3.During calls, outgoing calls, incoming calls, standby and listening to music, far away from the device
(within 5 minutes) and then return to the connectable range 4. Safety Instructions safety instructions. To prevent dangerous situations during use, please read the 1. Please do not place the product near heaters, microwave ovens, rice cookers, pressure cookers and other heating equipments to prevent the product from overeating and causing a fire. 2. Please do not drop or hit the product to avoid explosion. 3. When used by children, please ensure normal operation under adult supervision. 4. Do not use in a low temperature and humid environment, the normal use environment is 0-50. 5. Do not disassemble or repair the product without authorization. 6. Do not place the product within 20cm of medical equipment to prevent equipment interference. 7. When not in use, please unplug the product charger from the socket to avoid consuming the battery life or causing damage. 1. TWS+, 5.3 2. BT13 E8 100mA 5UA V5.3 85db 10 Type-C 36/3W 5V 300mA 3.7V 400mAH 3.7V 30mAH 100~20KHz 3. TWS 1. 7 9 m m 76mm 2. 3. 34mm 4. 4.1 4.2 5. 6. Type-c 5 3-4 4-5 1. 3 A2DP 1.0AVRCP 1.5AVDTP 1.0 AVCTP 1.4HFP 1.5GAVDP 1.0 2. 3/
3/
TWS
/TWS E8 3
2 2 2 1. 10 5 2. 3.5 4.
, 1. 3. , 4. , 0-50 5. , 6. 20cm, 7. , , BT13 2. , NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.