1. Product Description Bluetooth speaker side 3. Function description Operating 4. Safety Instructions True Wireless Earbuds with Bluetooth Speaker BT 11 BT 11 This product is an half in ear TWS Bluetooth Earbuds+integrated hanging buckle combination speaker, with compact and lightweight ergonomic design and built-in low-power high-performance Bluetooth version 5.1 chip and integrated Bluetooth hanging buckle speaker charging compartment. It can adapt to various modes of listening scenes such as sharing and private. The compact body supports the luggage buckle lock, which can be carried with you regardless of outdoor climbing or hiking. 33mm 68.5mm 1 1 6 m m 2. Technical parameters Bluetooth name of speaker: BT11 Bluetooth name of earbuds: E9-ANC Bluetooth earbuds side Bluetooth speaker Brief Introduction of TWS Earbuds Function:
Bluetooth speaker switch 1. When the binaural earbuds are taken out of the charging case, they will automatically complete the pairing with a prompt sound. 2. Then it can be searched and connected by the mobile phone. 3. After the connection is completed, there will be a success tone in both ears. 4.1 Click to pause or play music 4.2 Double-click on the left ear to the previous song, and double-click on the right ear to the next song. 5. Click on the call when you call, double-click the phone while 4. At this time, it can be realized through the earbuds touch button Call function of speaker In the state of an incoming call, short press the switch button to answer the call Function category Basic functions Speaker functions Function name Power on Power off Long press the switch button for 3 seconds to turn on Long press the switch button for 3 seconds to turn off Speaker connected to Bluetooth Turn on the Bluetooth of the mobile phone to search the Bluetooth name BT11and connect it success fully without a password Speaker pause/play Connected to the equivalent device, short press the switch button to play/pause when playing music TWS function of Speaker In the power-on state, press the on/off button twice to pair with TWS, and press twice to disconnect Headsets connected to Bluetooth Headsets power on Turn on the Bluetooth of the mobile phone to search the Bluetooth name E9-ANC and connect it success fully without a password Be automatically turn on when take it out of charging case or long press the touch button for 3 seconds
(The charging case must have electricity) adult supervision. Headsets power off Be automatically turn off when put into charging case or long press the touch button for 5 seconds Headsets pairing Take it out of the charging case, the Land R ears are automatically paired, and the main ear enters the pairing state with the mobile phone after the pairing is successful To prevent dangerous situations during use, please read the safety instructions. 1. Please do not place the product near heaters, microwave ovens, rice cookers, pressure cookers and other heating equipment to prevent the product from overeating and causing a fire. 2. Please do not drop or hit the product to avoid explosion. 3. When used by children, please ensure normal operation under 4. Do not use in a low temperature and humid environment, the normal use environment is 0-50. 5. Do not disassemble or repair the product without authorization. 6. Do not place the product within 20cm of medical equipment to prevent equipment interference. 7. When not in use, please unplug the product charger from the socket to avoid consuming the battery life or causing damage. Working current: 100mA Quiescent current: 5UA Bluetooth Version: V5.1 SNR: >=85db Effective distance: 10 meters Charging port: Type-C Key type: Button Low voltage reminder: Yes Audio range: 100-20Khz Input power: 5V 500mA Speaker specifications: 36 Internal magnetic/3W Rechargeable battery specification: 3.7V 300mAH Headsets battery specification: 3.7V 30mAH Speaker playing time: 3-4hours Headsets playing time: 24 hours Support protocol: A2DP1.0, AVRCP1.5, AVDTP1.0, AVCTP1.4, HFP1.5, GAVDP1.0 PU leather lanyard Magnetic closure cover calling. 6. When put the earbuds back into the charging case, automatically sleep and start charging, the charging light turn to red and will turn Headsets functions Up track Double click Lear touch button Next track Double click Rear touch button Stainless steel button Touch button Headsets Battery indicator Type-C charging port off after fully charged. represents 25% power. 7. Battery indicator consists of 4 Led lights, each light point Tips:
1. Put the earphones back into the charging case before use, and when take out the earbuds again, L and R earbuds will start pairing automatically. Or press the touch buttons of the L and R earbuds for 3 seconds, earbuds will automatically pair after power on. 2. Turn on the Bluetooth of the mobile phone after L and R earbuds pairing successfully. Brief Introduction of speaker function:
Long press the power button, the speaker can be searched for connection after power on, and it will automatically power off after 3 minutes without connection Phone functions Pause/play Voice assistant Connected to the equivalent device, press the touch button ofLor Rear to play/pause when playing music After connecting the mobile phone, three-click the touch button in any mode to start the mobile voice assistant (siri, etc.) ANC noise-canceling Long press for two seconds to enter the ANC noies-canceling function Answer call In the incoming call state, click L or R ear Hang up call During a call or outgoing call, double-click the L or Rear Refuse call In the incoming call state, long press the Lor Rear for 2 seconds without letting go Over-distance connection 1.The "L" and "R" ears are connected about 10 seconds before power on, and it will automatically shut down after 5 minutes of power on without connection 2.Stay away from the device (within 3 minutes) and then return to the connectable range during calls, outgoing calls, incoming calls, standby, and listening to music 80x60mm 128G m m 0 8 60 mm These limits are designed to This equipment generates uses and can radiate radio frequency energy installed and used in accordance with the instructions, may cause harmful FCC statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1) This device may not cause interference. 2) This device must accept any interference, including interference that may cause undesired operation of the device. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. provide reasonable protection against harmful interference in a residential installation. and, if not interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.