FCC ID: 2AQ2W-Q102 WIRELESS CHARGING MOUSE PAD

102 Q102

. 1. m m 7 2. 3. 4. 1 . D C 5 V / 1 . 5 A 2 . 5 W 3 . Q I 4 . D C 5 V / 1 A 5 . 7 5 %

6 . 3 - 5 m m 6 . :

5.MICRO USB 296 m m m 218 m M i c r o U S B D C 5 V 1 . 5 A 102 Mouse mat wireless charger Please read the instruction manual before operating the wireless charger Q102 1.Mouse Mat m m 7 2.Holder 3.Wireless Charger Indicator Light 4.Wireless Charger Receiver Wireless Power:5W;

Wireless Power Output:5V/1000mA Input:DC 5V/1.5A Charging Efficiency: 75 %

Charging Distance: 3 - 5MM Foreign Object Detection function directly.If the mobile phone without built-in wireless receiver,need to stick an extra wireless receiver on the mobile phone back to help the mobile phone connecting with wireless charger panel.The blue wireless charger indicator light will shining when charging,red indicator light will shinning when take the mobile phone away. 5.MICRO USB FCC ID:2AQ2W-Q102 296 m m Wireless Charging:use Micro USB cable to connect this device with adapter other power supply equipments or

(input power:

1.5A, DC 5V discharge current)

. If the mobile phone has built in wireless receiver,put the back side of mobile phone on the wirelesscharger panel for charging m 218 m This wireless charger support Foreign Object Detection function.Please don't put any coins,bank cards,metals or magnetic products in the charging area. Otherwise, it may easily cause the product to overheat or not work. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC RF exposure statement:

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.

C5266091_X10_Ed.1 Shenzhen Doageas Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 12/25/2019 Subject: Request for Confidentiality FCC ID: 2AQ2W-Q102 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality Short-Term Confidentiality No No No No No No No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Denly Zheng 12/25/2019 Title: /

1/1

ShenzhenDoageasTechnologyCo.,Ltd. Statement ProductName: WIRELESS CHARGING MOUSE PAD Model No.:Q102, Q5, Q9, Q98, WL001, WL002, Q91 We(Shenzhen Doageas Technology Co., Ltd., 5/F, 4th Bldg, Hedian Industrial Park, Guanlan, Longhua, Shenzhen, Guangdong 518110, China.) hereby state that all models above are identicalininteriorstructure,electricalcircuitsandcomponents,andjustthemodel namesaredifferentformarkingrequirement. Signature:

Name/title:Denly Zheng /

managerTel:0755-82956575 Email:admin@byhdigital.com Date:20190925

C5266091_X8_Ed.1 Letter of Authorization Shenzhen Doageas Technology Co., Ltd. Company: Shenzhen Doageas Technology Co., Ltd. Address: 5/F, 4th Bldg, Hedian Industrial Park, Guanlan, Longhua, Shenzhen, Guangdong 518110, China. Product Name: WIRELESS CHARGING MOUSE PAD Model Number: Q102, Q5, Q9, Q98, WL001, WL002, Q91 FCC Identifier: 2AQ2W-Q102 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name:

Title: /

Signature of applicant:

Date: 12/25/2019 Denly Zheng 1/1

EXPOSURE REPORT FCC ID: 2AQ2W-Q102 Report Number:

Sample Description:

Model(s):

Applicant:

Address:

Date of Test:

Date of issue: Dec. 19, 2019 MTi19121009-1E2 WIRELESS CHARGING MOUSE PAD Q102, Q5, Q9, Q98, WL001, WL002, Q91 Shenzhen Doageas Technology Co., Ltd 5/F, 4th Bldg, Hedian lndustrial Park, Guanlan, Longhua, Shenzhen, Guangdong518110, China Dec. 12, 2019 Dec. 19, 2019 Shenzhen Microtest Co., Ltd. http://www.mtitest.com Test Result Certification Applicants name:

Shenzhen Doageas Technology Co., Ltd Address:

5/F, 4th Bldg, Hedian lndustrial Park, Guanlan, Longhua, Shenzhen, Guangdong518110, China Manufacture's name:

Shenzhen Doageas Technology Co., Ltd Address:

5/F, 4th Bldg, Hedian lndustrial Park, Guanlan, Longhua, Shenzhen, Guangdong518110, China Product name:

WIRELESS CHARGING MOUSE PAD Trademark:

DOAGEAS Model name:

Q102, Q5, Q9, Q98, WL001, WL002, Q91 Standard:

FCC CFR 47 PART 1 , 1.1310 RF Exposure Procedures: KDB 680106 D01 RF Exposure Wireless Charging App v03 This device described above has been tested by Shenzhen Microtest Co., Ltd. and the test results show that the equipment under test (EUT) compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Tested by:

Danny Xu Dec. 19, 2019 Reviewed by:

Leo Su Dec. 19, 2019 Approved by:

Tom Xue Dec. 19, 2019 1 General Information 1.1 Description of EUT Product name:

WIRELESS CHARGING MOUSE PAD Brand name:

Model name:

Series model:

DOAGEAS Q102 Q5, Q9, Q98, WL001, WL002, Q91 Deference in serial model: All the model are the same circuit and RF module, except the model No.. Operation frequency:

115205 kHz Operational mode:

Wireless charging Modulation type:

Load modulation Antenna type:

Coil Antenna Power source:

DC 5V from adapter AC 120V/60Hz Battery:

Adapter information:

N/A N/A 1.2 Ancillary equipment list Equipment Model

1.3 Measurement uncertainty S/N

Manufacturer

Measurement Uncertainty for a Level of Confidence of 95 %, U=2xUc(y) Radiated emission(150kHz~30MHz) Radiated emission(30MHz~1GHz) Radiated emission (above 1GHz) Temperature Humidity 2.5 dB 4.2 dB 4.3 dB 1 degree 5 %

2 Testing site Test Site Shenzhen Microtest Co., Ltd Test Site Location No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China FCC Registration No.:

448573 3 List of test equipment Equipment No. Equipment Name Manufacturer Model MTI-E068 Broadband Field Meter Narda Safety Test Solutions GmbH NBM-

520 Serial No. Calibration date Due date D-1699 2019/07/13 2020/07/12 MTI-E069 Probe E-Field Narda Safety Test Solutions EF0691 H-0571 2019/07/13 2020/07/12 4 Test Results 4.4 Maximum permissible exposure 4.4.1 Limit Frequency range(MHz) Electric field strength(V/m) Magnetic field strength(A/m) Power density(mW/cm2) Averaging time(minutes) 0.3-3.0 3.0-30 30-300 300-1500 1500-100000 0.3-1.34 1.34-30 30-300 300-1500 1500-100000

(A) Limits for Occupational/Controlled Exposure 614

*100

*900/f2 1842/f 1.0 6 61.4 f/300 1.63 4.89/f 0.163

(B) Limits for General Population/Uncontrolled Exposure 614 824/f 27.5 1.63 2.19/f 0.073 5

*100

*180/f2 0.2 f/1500 1 f = frequency in MHz * = Plane-wave equivalent power density 6 6 6 6 6 30 30 30 30 30 4.4.2 Test Procedures E and H-field measurements should be made with the center of the probe at a distance of 15 cm surrounding the device and 20 cm above the top surface of the primary/client pair. These measurements should be repeated for three different client battery levels, 1%, 50%, and 99%. Record the test results. KDB 680106 D01 RF Exposure Wireless Charging App v03:

(1) Power transfer frequency is less than 1MHz.

(2) Output power from each primary coil is less than or equal to 15 watts.

(3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils.

(4) Client device is placed directly in contact with the transmitter.

(5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion).

(6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Note: The device is in compliance with KDB 680106 D01 RF Exposure Wireless Charging App v03 6 conditions. 4.4.3 Test Setup Top Side Back Side Left Side 15cm Right Side Field Probe Front Side Bottom Side 4.4.4 Test Result Maximum permissible Exposure Battery levels

<1%

<1%

<1%

<1%

<1%

<1%

Battery levels

<50%

<50%

<50%

<50%

<50%

<50%

Battery levels

<99%

<99%

<99%

<99%

<99%

<99%

Test distance(cm) 20 15 15 15 15 15 Test sides Top Bottom Left Right Front Back Limit Margin Limit (%) E field(V/m) Hfield(A/m) 0.427 0.421 0.424 0.423 0.419 0.417 614 0.070 0.118 0.111 0.114 0.108 0.115 0.116 1.63 6.114 Maximum permissible Exposure Test distance(cm) 20 15 15 15 15 15 Test sides Top Bottom Left Right Front Back Limit Margin Limit (%) E field(V/m) Hfield(A/m) 0.423 0.418 0.413 0.416 0.417 0.422 614 0.069 0.119 0.116 0.112 0.109 0.111 0.118 1.63 6.166 Maximum permissible Exposure Test sides Top Bottom Left Right Front Back Limit Margin Limit (%) Test distance(cm) 20 15 15 15 15 15 E field(V/m) Hfield(A/m) 0.431 0.427 0.422 0.427 0.421 0.426 614 0.070 0.122 0.118 0.105 0.121 0.112 0.105 1.63 6.321 4.4.5 MPE Setup photo

----END OF REPORT----