ENGLISH 1.Appearance description 2.Direction for the first useon Devices Activate & Install Bind with the Wearfit 2.0 Introduction of complete machine
Wristband*1 Packing box*1 User manual*1 Charge*1 User Manual
Thanks for choosing our device,Please read the user guide carefully before using. Please note:hardware and system of devices 3-5 sconds. ake sure the bluetooth in your phone is on,then click Please activate the device by pressing the screen for Please open the Wearfit 2.0 in your phone and m-
Device s function interface You are free to choose your screen saver in the
Device management from the Wearfit 2.0 ,and Press and hold the dial interface to enter the dial Battery capacity:170 mAh Screen size:1.3 inch TFT 3.Basic spectifications should meet the requirements Align the caed strap with the card hole on one side of
Bind Bracelet,and then connect with the device then click the Layouts,and then choose the image the wristband display,press the hand grip to the left,
M8,and finally pair the M8 what you want,and finally send it to your phone. release the hand grip,and snap into the card hole of NOTE:In Android, you just need to connect the de-
selection mode,slide the dial to the left of right,and click the interface to select the dial. IOS 8.0&Above Android 5.0&Above Support Bluetooth4.0 the display. vice directly. Search and Download Wearfit 2.0 Search and download Wearfit 2.0from the Apple Store or Android App Store. Scan the QR code and download It probably has a problem to open the link with We-
chat or other scan tools,please copy the link and op-
en it through browser. Charge:When you cant activate the device or the be-
ttery is low,please charge it in time . Full need 1-1.5 hours The dial interface slides down,switches to the m-
otion information interface,slides down again to switch to the sleep information interface,and slides down again to return the dial interface. 3.The dial interface slides up,switches to the Na-
tive information interface,and slides down to retu-
rn to the dial interface. The dial interface slides to the left,switches to the function list interface,slides up and down to slect the function,and right slides back to the dial interface. Function list interface,click a function to enter the fu-
nctions secondary interface. Such as:Click heart rate,then enter the heart rate m-
easurement interface. All secondary interfaces,right slide back to the upper interface,and slide back to the dial interface. Battery type:Polymer battery Working voltage:3.7V Sync:BT4.0 Waterproof:IP67 Charging mode:Charging clamp sensor:G-sensor 3 axis Endurance time:5-7 days of normal use Working temperature:-10-45 Device size48mm*10.8mm*19.3mm Deckaration of toxic and hazardous subs-
tances in electronic information products. The device meets the EU ROHS criterion, Please refer to IEC 62321,EU ROHS Dire-
ctive 2011/65/EU and revised directive 1.Cant find wristband and cant connect with it Please ensure the bluetooth is ON and the system of the smart phone is Android 5.0 or above and ISO 8.4 or above
phone settings and select GPS location and turn on GPS
Please ensure wristband is fullu charged.Do feel free to contact us if it cant work normally with plenty power. 2.The APP shows no connection after bound with wrist-
band,or it is connected but the power is 0%
In this case the App is not bound with wristband sucess-
fully,please rebind. 3.Cant connect the device with APP?
Pull down and refresh main interface,it will manually to synchronize the data,then it can display data in the APP. Auto-sync data will only be synchronized at first binding. Then it will automatic synchronize of data hourly.In additi-
on,dont forget to open hourly mesurement.Otherwise his-
togram hsant any data. 4.Pull -down and refresh APP,the data is not loaded?
out. 5.Time for wristband is not accurate?
When the wristband run out of power,the time of it may be in error after being recharged.Please connect with the smart p-
hone and the wristband will automatically synchronize the time. 6.The wristband time is not synchronized after connecting with the phone?
WARNING Please follow the doctors instructions,according to the results of self-diagnosis and treatment, it is very dangerous to have blood circulation disord-
ers, blood disease users,please under the gui-
dance of a doctor for treatment, the measurement results of this product are for reference only not for any medical purposes and basis.