FCC ID: 2AGBT-BS25 Bluetooth speaker

Bluetooth Speaker Instruction Manual Please confirm that the following accessories Adjustable design Waterproof are included in the packing box:

The speaker is flexible and can slight stretched to adapt to This speaker is IPX4 water waterproof and can prevent sweat. di erent neck sizes. Around Neck BT Speaker USB-Type-C Around Neck BT Speaker Instruction Manual Warranty card Certificate Manual Warranty card Certificate Avoid over bending the speaker. Do not fold the speaker. Please avoid collision with other Please do not use if the device is partly damaged. Please contact objects while storing it. distributors or after sales service of ERAN 1 2 key and indicator Definition 1 Power on/o and play/pause button Press and hold 3 seconds to power on/o the device. Short press during music playing for play/pause. Button and indicator Definition 2 Increase volume/previous track button 4LED Indicator Quick blinking in blue: Ready for Bluetooth Press and hold 3 seconds to increase volumeshort press for previous track. 3 Decrease volume/next track button Press and hold 3 seconds to decrease volumeshort press for next track. paring, and goes o when pairing is successful. Led indicator will be lit in red while charging 5:USB charging: For charging the device, connect the rated and will goes o when charging complete. charger to charge. 6MicrophoneUsed for Bluetooth-enabled calls. Microphone LED indicator USB charging port 4 8 Bluetooth BS25 5 9 Bluetooth connection Press and hold button for 3 seconds to power-on the device Device will automatically enter Bluetooth pairing mode and LED indicator blinks quickly in blue. User can use smart phone to search the Answering Call After the device has been successful connected with a smart phone , when the phone gets an incoming callthe device will make ring tones,short press button for answering the call, short press Charging Function When the USB charging cable is plugged in, the Red charging indicator will turn solid .When the red light of the charging indicator is o , the charge is complete. 66 paring ID ER-BS25 for pairing.The device will prompt out The Bluetooth device is connected successfully and LED light goes o button to hang up the phone during the phone conversation. Short press button two times in a row to call back the last call/call when paring is successfully. number of the mobile phone made. When dialing is in process, short press button to cancel the call before the other party answer. Name and composition of toxic or harmful substances or elements Toxic or harmful substances and elements Lead (Pb) (Hg)

(Cd)

(CR(VI)) (PBB)

(PBDE) PCB Metal part Plastic parts Speaker Cable X X X X O O O O O O O O O O O This form complies with SJ / t11364. than the limit requirements in GB / T26572. O:Indicates that the toxic or harmful substances contained in all similar substances in this part are lower X: Indicates that at least one of the same substances used in this part contains toxic or harmful substances higher than the limit requirements in GB / T26572. O O O O O O O O O O Technical Parameters 1.1.Input Charging Voltage and Current5V/1A 2.Battery TypeBuilt-in rechargeable Lithium battery 3.Battery Capacity3.7V/800mAh 4.Speaker3W*2 5.F/R100HZ~20KHZ 6.SNR80DB 7.Bluetooth VersionJerry V5.0 8.Working Range 10M 9.Play time 5 hours @ 100% volume ATTENTION:

With the software and hardware updated, all the technical data and the mode of operation showed on the manual could be changed without prior notice. 10 11 3 7 O O O O O FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Shenzhen E-Ran Technology Co., Ltd. Authorization Company: Shenzhen E-Ran Technology Co., Ltd. Address: Room 201, Plant No.34, Zhangyi Residential Quarter, Junzibu Community, Guanlan Street, Longhua District, Shenzhen China Product Name: Bluetooth Speaker Model Number(s): BS25 Product Description: Bluetooth Speaker We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2022/02/28 Signature:

Name:

ShiSheng Tan Title:

Manager Company: Shenzhen E-Ran Technology Co., Ltd.

Shenzhen E-Ran Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022/02/28 Subject; Request for Confidentiality FCC ID: 2AGBT-BS25 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

User Manual OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: ShiSheng Tan Title: Manager