2.Bluetooth Speaker Start pairing automatically once the power supply via USB cable, Follow the operating instruction of your Bluetooth Device(phone, pad etc) and allow it to search Bluetooth state, after a few seconds your mobile will discover the Bluetooth speaker under L4 Power Sound Lamp ,Select this and your device You can start play music through the speaker Enter password or PIN 0000 on our Bluetooth device (if necessary), and press ''Yes" or "Confirm"
will confirm this pairing. 3.Wireless Charging Put the smart phone to the top of Wireless charging panel, meet the right area of wireless charging of the phone, then start charging automatically The white led indicator will start slow flash once the wireless charging working Make sure your phone with wirelss charging function such as IPHONE 8 or upper version; if your phone is without wireless charging function please insert a wireless charging adaptor to your phone, then start wireless charging L4 PoweeSound Lamp User Manual Product illustration Bluetooth Speaker 340MM Flexible gooseneck LED Lamp For Speaker Bluetooth: V 4.2 Power supply: USB,5V 500MA Speaker : 40MM,4,5W Passive radiator: 36MM Frequency response:18-20K Hz Working range :10M For Led light Led qty: 7PCS yellow(warm) & 7pcs white(cold) Led brightness: 28LM 2 each Touch switch for LED Lamp For wireless charger Input: 5V/3A Output:5V/1A(5W), or 5V/2A(10W) Wireless Charging Pad Indicator of Wireless Charger 120MM 4 1 Specifications Product size: 120x340(max) Material: ABS + Silicone Patent No.:201830181147.4 Accessories:
user manual x 1 USB cable x 1(5V/3A) Adaptor x1 (input 110-240V, Output: 5V/3A) Functions 1.Led Lighting a. There are three modes of led light colors selectable:
Cold color mode: short press touching switch once to switchwhite
(cold)color LED light on;
Mix color mode: Short press touching switch again to change Led light to Mix color(warm and cold);
Warm color mode: Short press touching switch three times to change Led light to warm color b .Long press touching switch to change the brightness level of led lights during color mode 2 3 FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.