Bluetooth Thermometer/Hygrometer
Model No. TP-357
According to the operating system of your smartphone,
scan the following QR code to download and install.
(IOS 和 ANDROID 二维码)
Congratulations on your purchase of a Smart, Remote Bluetooth-connected
Thermometer/hygrometer. You will now be able to remotely monitor the temperature and
humidity of your living room, bedroom, greenhouse and etc. from your smartphone.
Introduction
Features
1. Temperature range: -4˚F to 140˚F (-20˚C to 60˚C)
2. Temperature accuracy: +/-1.0˚F (+/-0.5˚C)
3. Comfort Level: 3 icons:
,
,
If humidity is below 30%:
If humidity is between 30% to 60% :
If humidity is above 60%:
4. Humidity accuracy: +/- 2%
5. Power source: One AAA battery (1.5V)
6. 2.4GHZ wireless Bluetooth function, connect to mobile app via Bluetooth module
7. ˚F /˚C button: press it to toggle the temperature display unit between ˚F and ˚C. Press and
hold it for two seconds to enter pairing status.
Usage
Follow the simple steps below to set up your ThermoPro Bluetooth
Thermometer/Hygrometer and remotely monitor the temperature and humidity of your
living room, bedroom, greenhouse and etc. from your smartphone!
Step 1: Download and install the “ThermoPro Sensor“App.
Scan the QR code above, or search for “ThermoPro Sensor” on the Apple Store for IOS devices
or on the Google Play Store for Android devices. Download the App and install it on your
smartphone.
*iPhone and iPad apps for IOS 9.0 and above.
*Android app for versions 4.4 and above.
*Android users need to allow all the requests about this app from Android system.
Step 2: Enable Bluetooth on your smartphone under the smartphone Settings section. If your
smartphone has Bluetooth enabled, you can skip this step.
Step 3: Insert one AAA battery into the battery compartment on the back of the thermometer in
correct polarity (+) and (-) as indicated.
Step 4: The temperature and humidity will be displayed on the screen and the Bluetooth icon
will be flashing at the top of the display. The Bluetooth icon
will be flashing for 2 minutes
which indicates that the thermometer is ready for pairing to your mobile phone.
Step 5: Launch ThermoPro Sensor APP and press
to add a thermometer. The
thermometers will be shown on a list and select one to pair. Once pairing is complete, the
Bluetooth icon
on the thermometer display will stop flashing and the current temperature and
humidity will show on the APP. If the Bluetooth icon
stops flashing and you haven’t finished
the pairing, press and hold the ˚F /˚C button on the back of the unit for 2 seconds and the
will
be flashing again ready for pairing.
Done! Your ThermoPro Bluetooth Thermometer is ready for use!
Any questions or need more help with setup, please feel free to contact us.
Declaration of Conformity
Hereby, the manufacturer declares that this product with the basic requirements and applicable
regulations of the Radio Equipment Directive 2014/53/EU, the EMC Directive 2014/30/EU. The
complete declaration of conformity can be found at:
https://itronicsmall.com/eu-declaration-of-conformity/ complies
Disposal of the electronic appliance
This electronic appliance should not be disposed of with normal household waste.
Dispose of the unit at an approved facility or at your local recycling center. Please
observe the current rules and regulations when disposing of the appliance. Contact your local
council if in doubt.
Limited One-Year Warranty
ThermoPro warrants this product to be free of defects in parts, materials and workmanship for a
period of one year, from date of purchase.
Should any repairs or servicing under this warranty be required, contact Customer Service by
phone or email for instructions on how to pack and ship the product to ThermoPro.
This warranty gives you specific legal rights and you may also have other rights which vary from
state to state.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer
could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be u
sed in portable exposure condition without restriction.
Customer service
Telephone: 1-877-515-7797 (USA & Canada only)
Email: service@buythermopro.com
Hours: Weekdays 8:00 AM- 8:00 PM EST(USA & Canada only)